RMON probe implementation (rfc 2819) using python and libpcap. Only the filter group is implemented at this moment.

The easiest way to get started is to use this probe as a standalone docker container. You can do this simply by running the following command.

docker run -p 161:161/udp --net=host --name rmon_probe jslarraz/rmon_probe

You can also run the probe with as a set of containers using docker compose, which is a more reliable alternative. There are two ways to manage secrets between container, using docker secrets or environment variables.

This is the preferred way to manage your secrets within the docker environment. You should start creating the required docker secrets using your docker cli.

printf "my_root_pass" | docker secret create rmon-db-root -
printf "my_db_name" | docker secret create rmon-db-name -
printf "my_user" | docker secret create rmon-db-user -
printf "my_pass" | docker secret create rmon-db-pass -

This method is not current supported in this version but is planned to be supported for development environments in the future.

If you want to run it on Docker for windows you will need the following workaround. The idea is to allow the rmon_probe container to capture packages on the host using tshark (which is distributed as part of wireshark) over ssh, and the use tcpreplay to send them over the interface of the docker container. This could be achieved by running the following command on the rmon_probe container.

ssh win_user@win_host tshark -w - 'not port 22' | tcpreplay -i eth0 -

You need to increase the MTU of the docker network. It can be done by including the following option in the docker daemon config file.

"mtu": 9000"

In this project, the SNMP communities and, therefore, the access privileges, are managed through a new MIB defined for this purpose, the communityManagement MIB. The agent is initialized with a default master community, "admin", with read and write privileges on objects that belong to the communityManagement MIB and can be used to define new communities and assign privileges to them. Thus, first step to start using the probe is to create a new community with privileges on the filter group objects. The script "create_community.py" (under the scripts folder) shows how to modify the default master community, "admin", and how to use this new master community to create other communities with custom access privileges.

Code in this repository was initially developed as part of my Final undergraduate project, and full details about the system architecture, implementation decisions and performance test is available at project report (only Spanish).

https://zaguan.unizar.es/record/31543?ln=en

##Run things without root

apt-get install libcap2-bin sudo setcap cap_net_bind_service,cap_net_raw,cap_net_admin=eip /usr/bin/python2.7