Simulation of the full GPS stack, from satellites' transmission to position calculation at receivers
-
Updated
Jan 17, 2019 - MATLAB
Simulation of the full GPS stack, from satellites' transmission to position calculation at receivers
The ASTRES Toolbox for Mode Extraction of Non-Stationary Multicomponent Signals
Transcranial Magnetic Stimulation (TMS) Analysis Toolbox: A user friendly open source software for basic and advanced analysis of TMS related outcomes
Piano Note recognition using MATLAB
Configuring the radar FMCW waveform based on the system requirements and simulating the radar signal propagation and moving target scenario. Finally, post processing the radar signal using 1st FFT, 2nd FFT, and CA-CFAR to estimate the target's range and velocity.
MATLAB simulation of a BPSK data transmission system with AWGN channel, and its benchmark against BER(SNR).
Public repository for analysis scripts developed by the Macquarie MEG Laboratory
Signal Processing Toolbox for Calcium Imaging Data
Digital communication system using QAM modulation on Octave (without using package functions)
simple (and slow!) EEG viewer for Matlab
In this project, a simple watermarking system for spread spectrum audio is developed using the FFT transformation to insert the data into the signal host. The system is designed to resist the problem of desynchronization using synchronization codes.
Quadrature Phase Shift Keying (QPSK) is a form of Phase Shift Keying in which two bits are modulated at once, selecting one of four possible carrier phase shifts (0, 90, 180, or 270 degrees). QPSK allows the signal to carry twice as much information as ordinary PSK using the same bandwidth.
VGAResNet: A Unified Visibility Graph Adjacency Matrix-Based Residual Network for Chronic Obstructive Pulmonary Disease Detection Using Lung Sounds
In this project, we write Matlab code to generate different signals and do some operations on them.
Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting messages with a radio carrier wave. In amplitude modulation, the amplitude (signal strength) of the carrier wave is varied in proportion to that of the message signal, such as an audio signal.
how to perform basic peak analysis. It will help you answer questions such as: How do I find peaks in my signal? How do I measure distance between peaks? How do I measure the amplitude of peaks of a signal which is affected by a trend? How do I find peaks in a noisy signal? How do I find local minima?
Add a description, image, and links to the signal topic page so that developers can more easily learn about it.
To associate your repository with the signal topic, visit your repo's landing page and select "manage topics."