ABSTRACTLaNi(1-x)FexO3 (LNF) compounds, with 0.0 ≤ x ≤ 0.4, have interesting physical properties ... more ABSTRACTLaNi(1-x)FexO3 (LNF) compounds, with 0.0 ≤ x ≤ 0.4, have interesting physical properties such as high ionic and electronic conductivity, good catalytic activity for oxygen reduction, and thermodynamic compatibility with the YSZ electrolyte, which makes them potential candidates for SOFCs (solid oxides fuel cells) cathodes. Order for these excellent properties are achieved, it is necessary to ensure the presence of the homogeneous phase LNF. The methods for preparing these compounds influence the formation and stabilization of the homogeneous phase and therefore the physical properties of these oxides. For this reason, this work deals with the synthesis of the family of compounds LNF and the correlation between the synthesis and the physical properties obtained. In this context, LNF compounds were synthesized by a modified Pechini method for production of powders. Two different synthetic routes were employed, changing the source of nickel: nickel acetate and nickel nitrate. I...
A aerodinâmica é uma ciência que faz parte da física, e com o surgimento do primeiro avião se tor... more A aerodinâmica é uma ciência que faz parte da física, e com o surgimento do primeiro avião se tornou cada vez mais aprofundada e uma área totalmente nova. Seu estudo influência desde a projeção do Antonov An-225, que era a maior aeronave de asa fixa do mundo antes da Guerra na Ucrânia, até a projeção de aeromodelos para a competição SAE Brasil Aerodesign. O trabalho mostra o estudo e a projeção de um novo perfil aerodinâmico para o projeto de extensão da USJT, a Equipe Ozires USJT Aerodesign. Este novo perfil surge como uma alternativa otimizada de dois perfis tradicionais do projeto, o E423 e S1223, oferecendo propriedades superiores principalmente em seu coeficiente de sustentação e rendimento.
Synthesis of RNiO3 (R = rare earth) nanowires can be interesting as building blocks with potentia... more Synthesis of RNiO3 (R = rare earth) nanowires can be interesting as building blocks with potential applications in optoelectronic devices. Here, we describe the synthesis and characterization of NdNiO3-δ (NNO) nanowires produced by electrospinning technique via polymeric precursor solution at relatively low temperature and oxygen pressure. These NNO nanowires were characterized by x-ray diffraction (XRD), x-ray photodetection spectroscopy (XPS), Field Emission Scanning Electron Microscopy (Fe-SEM), Magnetization (M(T)) and electrical resistance (R(T)) measurements. SEM images revealed a granular nanowire microstructure of NNO nanostructures, with a distribution of nanowire diameters ranging from 50 to 150 nm. The NNO nanowires also exhibit granular characteristics with an average grain diameter of 40 nm. The x-ray diffraction patterns of the NNO nanowires indicated that these samples exhibited a high degree of crystallinity and their Bragg reflections can be indexed to an orthorhom...
The aim of the research here presented is to make a study of the thermodynamic behavior of Argon.... more The aim of the research here presented is to make a study of the thermodynamic behavior of Argon. A computational simulation of this element's phase transition was made, starting from the control of its thermodynamic quantities, such as the number of molecules, volume, pressure and temperature, so that it could be possible to find a simplification of the studied system. In order to accomplish this thermodynamic analysis, it was used a software for computational simulation of liquids – DICE -, which, starting from sampling techniques related to the Monte Carlo Method, generates configurations that simulate a system exclusively made of Argon molecules. This algorithm was applied considering the ensemble NVT, which implies in an isochoric process. For the simulation, it was used 147, 309 and 561 molecules, for temperatures varying from 40K to 70K, range in which it is expected for the transition temperature to be found. In order for that to happen, it is necessary to determine the ...
Apoio: PIBIC Mackenzie/MackPesquisa Resumo Uma questão de extrema importância na utilização de um... more Apoio: PIBIC Mackenzie/MackPesquisa Resumo Uma questão de extrema importância na utilização de um material é o conhecimento de sua resistência mecânica, havendo sempre a busca pela otimização dos materiais. Além disso, a preocupação da sociedade para com o meio ambiente fomenta pesquisas relacionadas à utilização de materiais de produção ecologicamente sustentável, como é o caso da fibra de juta. O objetivo desta pesquisa é a caracterização mecânica de materiais compósitos de borracha SBR com fibra de juta. Constatou-se que a adição de fibra de juta à borracha gera melhor desempenho mecânico do material, elevando seu módulo de elasticidade em até 2000%. Buscou-se determinar a influência do percentual de fibra de juta na mistura e verificou-se que o aumento da proporção de fibra de juta na massa do compósito é proporcional ao aumento do módulo de elasticidade do material. Além disso, foi possível averiguar o comportamento positivo da rigidez do material ao se adicionar fibra de juta ...
ABSTRACTLaNi(1-x)FexO3 (LNF) compounds, with 0.0 ≤ x ≤ 0.4, have interesting physical properties ... more ABSTRACTLaNi(1-x)FexO3 (LNF) compounds, with 0.0 ≤ x ≤ 0.4, have interesting physical properties such as high ionic and electronic conductivity, good catalytic activity for oxygen reduction, and thermodynamic compatibility with the YSZ electrolyte, which makes them potential candidates for SOFCs (solid oxides fuel cells) cathodes. Order for these excellent properties are achieved, it is necessary to ensure the presence of the homogeneous phase LNF. The methods for preparing these compounds influence the formation and stabilization of the homogeneous phase and therefore the physical properties of these oxides. For this reason, this work deals with the synthesis of the family of compounds LNF and the correlation between the synthesis and the physical properties obtained. In this context, LNF compounds were synthesized by a modified Pechini method for production of powders. Two different synthetic routes were employed, changing the source of nickel: nickel acetate and nickel nitrate. I...
A aerodinâmica é uma ciência que faz parte da física, e com o surgimento do primeiro avião se tor... more A aerodinâmica é uma ciência que faz parte da física, e com o surgimento do primeiro avião se tornou cada vez mais aprofundada e uma área totalmente nova. Seu estudo influência desde a projeção do Antonov An-225, que era a maior aeronave de asa fixa do mundo antes da Guerra na Ucrânia, até a projeção de aeromodelos para a competição SAE Brasil Aerodesign. O trabalho mostra o estudo e a projeção de um novo perfil aerodinâmico para o projeto de extensão da USJT, a Equipe Ozires USJT Aerodesign. Este novo perfil surge como uma alternativa otimizada de dois perfis tradicionais do projeto, o E423 e S1223, oferecendo propriedades superiores principalmente em seu coeficiente de sustentação e rendimento.
Synthesis of RNiO3 (R = rare earth) nanowires can be interesting as building blocks with potentia... more Synthesis of RNiO3 (R = rare earth) nanowires can be interesting as building blocks with potential applications in optoelectronic devices. Here, we describe the synthesis and characterization of NdNiO3-δ (NNO) nanowires produced by electrospinning technique via polymeric precursor solution at relatively low temperature and oxygen pressure. These NNO nanowires were characterized by x-ray diffraction (XRD), x-ray photodetection spectroscopy (XPS), Field Emission Scanning Electron Microscopy (Fe-SEM), Magnetization (M(T)) and electrical resistance (R(T)) measurements. SEM images revealed a granular nanowire microstructure of NNO nanostructures, with a distribution of nanowire diameters ranging from 50 to 150 nm. The NNO nanowires also exhibit granular characteristics with an average grain diameter of 40 nm. The x-ray diffraction patterns of the NNO nanowires indicated that these samples exhibited a high degree of crystallinity and their Bragg reflections can be indexed to an orthorhom...
The aim of the research here presented is to make a study of the thermodynamic behavior of Argon.... more The aim of the research here presented is to make a study of the thermodynamic behavior of Argon. A computational simulation of this element's phase transition was made, starting from the control of its thermodynamic quantities, such as the number of molecules, volume, pressure and temperature, so that it could be possible to find a simplification of the studied system. In order to accomplish this thermodynamic analysis, it was used a software for computational simulation of liquids – DICE -, which, starting from sampling techniques related to the Monte Carlo Method, generates configurations that simulate a system exclusively made of Argon molecules. This algorithm was applied considering the ensemble NVT, which implies in an isochoric process. For the simulation, it was used 147, 309 and 561 molecules, for temperatures varying from 40K to 70K, range in which it is expected for the transition temperature to be found. In order for that to happen, it is necessary to determine the ...
Apoio: PIBIC Mackenzie/MackPesquisa Resumo Uma questão de extrema importância na utilização de um... more Apoio: PIBIC Mackenzie/MackPesquisa Resumo Uma questão de extrema importância na utilização de um material é o conhecimento de sua resistência mecânica, havendo sempre a busca pela otimização dos materiais. Além disso, a preocupação da sociedade para com o meio ambiente fomenta pesquisas relacionadas à utilização de materiais de produção ecologicamente sustentável, como é o caso da fibra de juta. O objetivo desta pesquisa é a caracterização mecânica de materiais compósitos de borracha SBR com fibra de juta. Constatou-se que a adição de fibra de juta à borracha gera melhor desempenho mecânico do material, elevando seu módulo de elasticidade em até 2000%. Buscou-se determinar a influência do percentual de fibra de juta na mistura e verificou-se que o aumento da proporção de fibra de juta na massa do compósito é proporcional ao aumento do módulo de elasticidade do material. Além disso, foi possível averiguar o comportamento positivo da rigidez do material ao se adicionar fibra de juta ...
Uploads
Papers by Bruna Niccoli Ramirez