Formation of dense monolayers with proven atmospheric stability using simple fabrication conditio... more Formation of dense monolayers with proven atmospheric stability using simple fabrication conditions remains a major challenge for potential applications such as (bio)sensors, solar cells, surfaces for growth of biological cells, and molecular, organic, and plastic electronics. Here, we demonstrate a single-step modification of organophosphonic acids (OPA) on 1D and 2D structures using supercritical carbon dioxide (SCCO2) as a processing medium, with high stability and significantly shorter processing times than those obtained by the conventional physisorption-chemisorption method (2.5 h vs 48-60 h).The advantages of this approach in terms of stability and atmospheric resistivity are demonstrated on various 2D materials, such as indium-tin-oxide (ITO) and 2D Si surfaces. The advantage of the reported approach on electronic and sensing devices is demonstrated by Si nanowire field effect transistors (SiNW FETs), which have shown a few orders of magnitude higher electrical and sensing p...
Silicon nanowires (Si NWs) terminated with methyl functionalities exhibit higher oxidation resist... more Silicon nanowires (Si NWs) terminated with methyl functionalities exhibit higher oxidation resistance under ambient conditions than equivalent 2D Si(100) and 2D Si(111) surfaces having similar or 10-20% higher initial coverage. The kinetics of methyl adsorption as well as complementary surface analysis by XPS and ToF SIMS attribute this difference to the formation of stronger Si-C bonds on Si NWs, as compared to 2D Si surfaces. This finding offers the possibility of functionalising Si NWs with minimum effect on the conductance of the near-gap channels leading towards more efficient Si NW electronic devices.
Ultrathin films were fabricated using synthesized polyimide (HPI) with hydroxyl pendant groups in... more Ultrathin films were fabricated using synthesized polyimide (HPI) with hydroxyl pendant groups in a layer-by-layer fashion on amine-terminated substrates of silicon, quartz and gold. The interlayer linkages were established by using terephthaloyl chloride as a bridging agent to form ...
An ultrathin film of oligoimide has been fabricated on amine-modified substrates of silicon and q... more An ultrathin film of oligoimide has been fabricated on amine-modified substrates of silicon and quartz through alternate layer-by-layer (LBL) assembly of pyromellitic dianhydride (PMDA) and diaminodiphenyl ether (DDE), with interlayer links established by covalent bonds. The assembly was formed in supercritical carbon dioxide (SCCO2) and in solution (dimethyl acetamide, DMAc), and the imidization reaction was performed by thermal and chemical methods, in benzene and in the supercritical medium. X-ray photoelectron and UV-visible absorption spectroscopies, atomic force microscopy (AFM), and ellipsometry were employed to study the interfacial chemistry, growth, morphology, and thickness of the assembled film. XPS analysis confirmed the sequential deposition of PMDA and DDE through formation of amic acids. At each deposition step, surface functionalities for the assembly of the next layer were generated. The interfacial chemical reaction was almost complete in the SCF (supercritical fluid) medium, as compared to the conversions observed in conventional assembly. Both the PMDA and DDE molecules were assembled in an organized manner, resulting in uniform surface morphology. Uniform film growth was revealed from the increase of UV absorption intensity and film thickness. The overall growth and quality of the films in SCF medium were greater than that for films formed in DMAc. The results of this novel study show that an environmentally friendly solvent can be used to obtain mechanically robust and thermally stable ultrathin films with little loss of material during the imidization step. In contrast to conventional deposition of the molecular layers that utilizes liquid solvents, use of SCCO(2) avoids solvent effects and posttreatment for solvent removal, while ensuring facile transport during contact.
Ultrathin films containing dendrimers are fabricated on amine- and anhydride-derivatized silicon ... more Ultrathin films containing dendrimers are fabricated on amine- and anhydride-derivatized silicon dioxide surface through alternate layer-by-layer (LbL) assembly of pyromellitic dianhydride (PMDA) and poly(amidoamine) (PAMAM) dendrimer in supercritical carbon dioxide (SCCO2) with interlayer linkage established by covalent bonds. X-ray photoelectron and UV-visible absorption spectroscopies, atomic force microscopy (AFM), and ellipsometry were employed to study the interfacial chemistry, growth, morphology, and thickness of the assembled film. XPS analysis suggests that the PMDA/PAMAM interlayer covalent bond is established to completion, and functional surfaces for immobilization of the next layer are available after deposition of each layer. UV-visible absorption and ellipsometry revealed layer-by-layer growth of the film. The functional property film as a porous matrix was manifested in the reduction of the refractive index upon introduction of the dendrimer.
ABSTRACT The solid-state organization of a benzothiadiazole-cyclopentadithiophene copolymer with ... more ABSTRACT The solid-state organization of a benzothiadiazole-cyclopentadithiophene copolymer with long, branched decyl-tetradecyl side chains (CDT-BTZ-C14,10) is investigated. The C14,10 substituents are sterically demanding and increase the π-stacking distance to 0.40 nm from 0.37 nm for the same polymer with linear hexadecyls (C16). Despite the bulkiness, the C14,10 side chains tend to crystallize, leading to a small chain-to-chain distance between lamellae stacks and to a crystal-like microstructure in the thin film. Interestingly, field-effect transistors based on solution processed layers of CDT-BTZ-C14,10 show ambipolar behavior in contrast to CDT-BTZ-C16 with linear side chains, for which hole transport was previously observed. Due to the increased π-stacking distance, the mobilities are only 6 × 10−4 cm²/Vs for electrons and 6 × 10−5 cm²/Vs for holes, while CDT-BTZ-C16 leads to values up to 5.5 cm²/Vs. The ambipolarity is attributed to a lateral shift between stacked backbones provoked by the bulky C14,10 side chains. This reorganization is supposed to change the transfer integrals between the C16 and C14,10 substituted polymers. This work shows that the electronic behavior in devices of one single conjugated polymer (in this case CDT-BTZ) can be controlled by the right choice of the substituents to place the backbones in the desired packing.
Formation of dense monolayers with proven atmospheric stability using simple fabrication conditio... more Formation of dense monolayers with proven atmospheric stability using simple fabrication conditions remains a major challenge for potential applications such as (bio)sensors, solar cells, surfaces for growth of biological cells, and molecular, organic, and plastic electronics. Here, we demonstrate a single-step modification of organophosphonic acids (OPA) on 1D and 2D structures using supercritical carbon dioxide (SCCO2) as a processing medium, with high stability and significantly shorter processing times than those obtained by the conventional physisorption-chemisorption method (2.5 h vs 48-60 h).The advantages of this approach in terms of stability and atmospheric resistivity are demonstrated on various 2D materials, such as indium-tin-oxide (ITO) and 2D Si surfaces. The advantage of the reported approach on electronic and sensing devices is demonstrated by Si nanowire field effect transistors (SiNW FETs), which have shown a few orders of magnitude higher electrical and sensing p...
Silicon nanowires (Si NWs) terminated with methyl functionalities exhibit higher oxidation resist... more Silicon nanowires (Si NWs) terminated with methyl functionalities exhibit higher oxidation resistance under ambient conditions than equivalent 2D Si(100) and 2D Si(111) surfaces having similar or 10-20% higher initial coverage. The kinetics of methyl adsorption as well as complementary surface analysis by XPS and ToF SIMS attribute this difference to the formation of stronger Si-C bonds on Si NWs, as compared to 2D Si surfaces. This finding offers the possibility of functionalising Si NWs with minimum effect on the conductance of the near-gap channels leading towards more efficient Si NW electronic devices.
Ultrathin films were fabricated using synthesized polyimide (HPI) with hydroxyl pendant groups in... more Ultrathin films were fabricated using synthesized polyimide (HPI) with hydroxyl pendant groups in a layer-by-layer fashion on amine-terminated substrates of silicon, quartz and gold. The interlayer linkages were established by using terephthaloyl chloride as a bridging agent to form ...
An ultrathin film of oligoimide has been fabricated on amine-modified substrates of silicon and q... more An ultrathin film of oligoimide has been fabricated on amine-modified substrates of silicon and quartz through alternate layer-by-layer (LBL) assembly of pyromellitic dianhydride (PMDA) and diaminodiphenyl ether (DDE), with interlayer links established by covalent bonds. The assembly was formed in supercritical carbon dioxide (SCCO2) and in solution (dimethyl acetamide, DMAc), and the imidization reaction was performed by thermal and chemical methods, in benzene and in the supercritical medium. X-ray photoelectron and UV-visible absorption spectroscopies, atomic force microscopy (AFM), and ellipsometry were employed to study the interfacial chemistry, growth, morphology, and thickness of the assembled film. XPS analysis confirmed the sequential deposition of PMDA and DDE through formation of amic acids. At each deposition step, surface functionalities for the assembly of the next layer were generated. The interfacial chemical reaction was almost complete in the SCF (supercritical fluid) medium, as compared to the conversions observed in conventional assembly. Both the PMDA and DDE molecules were assembled in an organized manner, resulting in uniform surface morphology. Uniform film growth was revealed from the increase of UV absorption intensity and film thickness. The overall growth and quality of the films in SCF medium were greater than that for films formed in DMAc. The results of this novel study show that an environmentally friendly solvent can be used to obtain mechanically robust and thermally stable ultrathin films with little loss of material during the imidization step. In contrast to conventional deposition of the molecular layers that utilizes liquid solvents, use of SCCO(2) avoids solvent effects and posttreatment for solvent removal, while ensuring facile transport during contact.
Ultrathin films containing dendrimers are fabricated on amine- and anhydride-derivatized silicon ... more Ultrathin films containing dendrimers are fabricated on amine- and anhydride-derivatized silicon dioxide surface through alternate layer-by-layer (LbL) assembly of pyromellitic dianhydride (PMDA) and poly(amidoamine) (PAMAM) dendrimer in supercritical carbon dioxide (SCCO2) with interlayer linkage established by covalent bonds. X-ray photoelectron and UV-visible absorption spectroscopies, atomic force microscopy (AFM), and ellipsometry were employed to study the interfacial chemistry, growth, morphology, and thickness of the assembled film. XPS analysis suggests that the PMDA/PAMAM interlayer covalent bond is established to completion, and functional surfaces for immobilization of the next layer are available after deposition of each layer. UV-visible absorption and ellipsometry revealed layer-by-layer growth of the film. The functional property film as a porous matrix was manifested in the reduction of the refractive index upon introduction of the dendrimer.
ABSTRACT The solid-state organization of a benzothiadiazole-cyclopentadithiophene copolymer with ... more ABSTRACT The solid-state organization of a benzothiadiazole-cyclopentadithiophene copolymer with long, branched decyl-tetradecyl side chains (CDT-BTZ-C14,10) is investigated. The C14,10 substituents are sterically demanding and increase the π-stacking distance to 0.40 nm from 0.37 nm for the same polymer with linear hexadecyls (C16). Despite the bulkiness, the C14,10 side chains tend to crystallize, leading to a small chain-to-chain distance between lamellae stacks and to a crystal-like microstructure in the thin film. Interestingly, field-effect transistors based on solution processed layers of CDT-BTZ-C14,10 show ambipolar behavior in contrast to CDT-BTZ-C16 with linear side chains, for which hole transport was previously observed. Due to the increased π-stacking distance, the mobilities are only 6 × 10−4 cm²/Vs for electrons and 6 × 10−5 cm²/Vs for holes, while CDT-BTZ-C16 leads to values up to 5.5 cm²/Vs. The ambipolarity is attributed to a lateral shift between stacked backbones provoked by the bulky C14,10 side chains. This reorganization is supposed to change the transfer integrals between the C16 and C14,10 substituted polymers. This work shows that the electronic behavior in devices of one single conjugated polymer (in this case CDT-BTZ) can be controlled by the right choice of the substituents to place the backbones in the desired packing.
Uploads
Papers by Sreenivasa R Puniredd