Since the beginning of the ongoing Amatrice seismic sequence on August 24, 2016, initiated by a M... more Since the beginning of the ongoing Amatrice seismic sequence on August 24, 2016, initiated by a Mw 6.0 normal faulting earthquake, the EMERGEO Working Group (an INGV team devoted to earthquake aftermath geological survey) investigated coseismic effects on the natural environment. Up to now, we surveyed about 750 km2 and collected more than 3200 geological observations including differently oriented tectonic fractures together with intermediate-to small-sized landslides. The most impressive coseismic evidence was found along the known active Mt. Vettore fault system, where surface ruptures with clear vertical/horizontal offset were observed for more than 5 km, while unclear and discontinuous coseismic features were recorded along the Laga Mts. Fault systems.
Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate d... more Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate da modelli digitali aventi grande estensione e/o grande dettaglio. Il sistema si basa sull'applicativo gratuito Google Earth (GE) e la navigazione è immediatamente fruibile da tutti gli utenti abilitati che dispongano dei requisiti client necessari. Per innescare la navigazione dei database descritti è sufficiente caricare dentro GE un file-tarter kml da 1 Kbyte. Le immagini derivate dai vari modelli altimetrici permettono una efficace lettura ...
The 2014-2015 fissure eruption in Holuhraun started when a new code (named F-L) was being develop... more The 2014-2015 fissure eruption in Holuhraun started when a new code (named F-L) was being developed. The availability of several digital Elevation Models of the area inundated by the lava and the availability of continuously updated maps of the flow (collected in the field and through remote sensing imagery) provided an excellent opportunity for testing and calibrating the new code against an evolving flow field. Remote sensing data also provided a constrain on the effusion rate. Existing numerical codes for the simulation of lava flow emplacement are based either on the solution of some simplification of the physical governing equations of this phenomenon (the so-called " deterministic codes "-e.g. Hidaka et al. 2005; Crisci et al. 2010), or, instead, on the evidence that lava flows tend to follow the steepest descent path from the vent downhill (the so-called " probabilistic codes "-e.g. Favalli et al. 2005). F-L is a new code for the simulation of lava flows, ...
The concept: during the emplacement, lava flows settle volumes of lava all along the path. If we ... more The concept: during the emplacement, lava flows settle volumes of lava all along the path. If we found a relation between the path and the settling process, we can simulate the emplacement without tackling directly the inner lava dynamics.
Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate d... more Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate da modelli digitali aventi grande estensione e/o grande dettaglio. Il sistema si basa sull'applicativo gratuito Google Earth (GE) e la navigazione è immediatamente fruibile da tutti gli utenti abilitati che dispongano dei requisiti client necessari. Per innescare la navigazione dei database descritti è sufficiente caricare dentro GE un file-tarter kml da 1 Kbyte. Le immagini derivate dai vari modelli altimetrici permettono una efficace lettura ...
The procedure for the derivation of a hazard map for lava flows at Mount Etna through lava flow s... more The procedure for the derivation of a hazard map for lava flows at Mount Etna through lava flow simulations is critically reviewed. The DOWNFLOW code is then used to explore the sensitivity of the hazard map with respect to input settings. Three parameters are varied within ranges close to values recently applied to derive similar hazard maps: (i) the spacing between computational vents; (ii) the spatial probability density function (PDF) for future vent opening; and (iii) the expected length of future lava flows. The effect of increasing the spacing between computational vents tends to be compensated at the lower elevations, and a vent spacing smaller than about 500 m warrants an overall difference with respect to a reference map which is smaller than 6–8%. A random subsampling of the elements used to obtain the input vent opening PDF (−20%, −40% and −60%) originates significant but drastically smaller differences in the obtained map with respect to the reference one (~10%, ~12.5% and ~17% respectively, on average). In contrast, our results show that changes in the expected flow length originate, by far, the highest changes in the obtained hazard map, with overall differences ranging between ~20% and ~65%, and between ~30% and ~95% if computed only over inhabited areas. The simulations collected are further processed to derive maps of the confluence/diffluence index,
which quantifies the error introduced, locally, when the position of the vent is misplaced by a given distance.
The database and visualization facilities of Geographic Information System (GIS) software are emp... more The database and visualization facilities of Geographic Information System (GIS) software are employed to support the analysis of rock texture from thin section by image processing. A Microscopic Information System (MIS) is hence obtained. The method is applied to transmitted light images of 137 samples obtained from 8 granitoid rocks. A slide scanner and a mount for crossed polarization are used to acquire the input images. For each thin section 5 collimated RGB images are scanned: 4 under different directions of crossed polarization and 1 without polarization. A grain segmentation procedure, based on two region growing functions is applied. The output is converted to vector format and refined using editing tools in the MIS environment, which enables a straightforward match between the input imagery and the final vectorized texture. GIS software provides optimal management of the MIS database, allowing the cumulative measurement of more than 87,000 grains.
High resolution, LIDAR-derived digital elevation models of volcanic areas can significantly impro... more High resolution, LIDAR-derived digital elevation models of volcanic areas can significantly improve knowledge of lava flow morphology and emplacement mechanisms. Here we focus on single flow units, presenting a new semi-automatic procedure which provides a quantitative analysis of their shape. The method relies on the automatic processing of the elevation profiles obtained on transects orthogonal to the flow unit axis. The initial phase of the Mount Etna flank eruption from September 2004 is taken as test case, and the procedure is applied on an active lava flow, which was emplaced on the eastern flank of the volcano. The main topographic dataset used is a 2-m-resolution digital elevation model obtained from a LIDAR survey. Starting from the axis of a lava flow unit, our method yields morphometric data on the flow unit at a 2 m spacing, calculating parameters including flow width, channel width, the heights of the levees, inward and outward slope of levees, and estimating pre-emplacement slope along the axis. The procedure is embedded in a customized GIS, which allows easy processing, handling and displaying of data. The procedure has also been applied to another flow unit emplaced during the October–November 1999 overflow from the Bocca Nuova crater. Results show that the channel width seems to accommodate first-order trends of the pre-emplacement slope along the flow unit axis, while it is little affected by high frequency changes in slope; in contrast, flow unit width and flow unit thickness are apparently influenced by small-scale changes in slope. The different emplacement conditions of the two flow units are reflected by the overall contrasting morphologies, as shown by the different average thickness and by the different ratios between (i) flow width vs. channel width and (ii) flow unit section area vs. channel width. The new method provides an enhanced, systematic and thorough morphometric description of flow units, which may improve the understanding of the emplacement mechanisms of lava flows on Earth and other planets.
In recent years, progress in geographic information systems (GIS) and remote sensing techniques h... more In recent years, progress in geographic information systems (GIS) and remote sensing techniques have allowed the mapping and studying of lava flows in unprecedented detail. A composite GIS technique is introduced to obtain high resolution boundaries of lava flow fields. This technique is mainly based on the processing of LIDAR-derived maps and digital elevation models (DEMs). The probabilistic code DOWNFLOW is then used to simulate eight large flow fields formed at Mount Etna in the last 25 years. Thanks to the collection of 6 DEMs representing Mount Etna at different times from 1986 to 2007, simulated outputs are obtained by running the DOWNFLOW code over pre-emplacement topographies. Simulation outputs are compared with the boundaries of the actual flow fields obtained here or derived from the existing literature. Although the selected fields formed in accordance with different emplacement mechanisms, flowed on different zones of the volcano over different topographies and were fed by different lava supplies of different durations, DOWNFLOW yields results close to the actual flow fields in all the cases considered. This outcome is noteworthy because DOWNFLOW has been applied by adopting a default calibration, without any specific tuning for the new cases considered here. This extensive testing proves that, if the pre-emplacement topography is available, DOWNFLOW yields a realistic simulation of a future lava flow based solely on a knowledge of the vent position. In comparison with deterministic codes, which require accurate knowledge of a large number of input parameters, DOWNFLOW turns out to be simple, fast and undemanding, proving to be ideal for systematic hazard and risk analyses.
The 10-m-resolution TINITALY/01 DEM (Tarquini et al., 2007) is compared with the two, coarserreso... more The 10-m-resolution TINITALY/01 DEM (Tarquini et al., 2007) is compared with the two, coarserresolution, global-coverage, spaceborne-based SRTM and ASTER DEMs and with a high-resolution, LIDAR-derived DEM. Afterwards, we presented a webGIS which allows to explore a 10-m-resolution anaglyph layer showing the landforms of the whole Italian territory in 3D. The webGIS (http://tinitaly. pi.ingv.it/) is open to the public, and can be used to carry out a preliminary analysis of landforms. The TINITALY/01 DEM is available for scientific purposes on the basis of a research agreement (see the above website or write to tinitaly@pi.ingv.it).
Mt. Cameroon is one of the most active effusive volcanoes in Africa. About 500,000 people living ... more Mt. Cameroon is one of the most active effusive volcanoes in Africa. About 500,000 people living or working around its fertile flanks are subject to significant threat from lava flow inundation. Lava flow hazard and risk were assessed by simulating probable lava flow paths using the DOWNFLOW code. The vent opening probability density function and lava flow length distribution were determined on the basis of available data from past eruptions at Mt. Cameroon volcano. Code calibration was performed through comparison with real lava flow paths. The topographic basis for simulations was the 90-m resolution SRTM DEM. Simulated lava flows from about 80,000 possible vents were used to produce a detailed lava flow hazard map. The lava flow risk in the area was mapped by combining the hazard map with digitized infrastructures (i.e., human settlements and roads). Results show that the risk of lava flow inundation is greatest in the most inhabited coastal areas comprising the town of Limbe, which constitutes the center of Cameroon’s oil industry and an important commercial port. Buea, the second most important town in the area, has a much lower risk although it is significantly closer to the summit of the volcano. Nonnegligible risk characterizes many villages and most roads in the area surrounding the volcano. In addition to the conventional risk mapping described above, we also present (1) two reversed risk maps (one for buildings and one for roads), where each point on the volcano is classified according to the total damage expected as a consequence of vent opening at that point; (2) maps of the lava catchments for the two main towns of Limbe and Buea, illustrating the expected damage upon venting at any point in the catchment basin. The hazard and risk maps provided here represent valuable tools for both medium/long-term land-use planning and real-time volcanic risk management and decision making.
The aim of this study is to determine and characterise the control exerted by parent rock texture... more The aim of this study is to determine and characterise the control exerted by parent rock texture on sand composition as a function of grain size. The sands investigated were generated from granitoid parent rocks by the Rhone, Damma and Sidelen glaciers, which drain the Aar Massif in the Central Alps (Switzerland), and were deposited in glacial and fluvio-glacial settings. Mechanical erosion, comminution (crystal breakdown and abrasion) and hydraulic sorting are the most important processes controlling the generation of sediments in this environment, whereas chemical and/or biochemical weathering plays a negligible role. By using a GIS-based Microscopic Information System (MIS), five samples from the glacier-drained portions of the Aar basement have been analysed to determine textural parameters such as modal composition, crystal size distribution and mineral interfaces (types and lengths). Petrographic data of analysed sands include traditional point counts (Gazzi-Dickinson method, minimum of 300 points) as well as textural counts to determine interface types, frequency, and polycrystallinity in phaneritic rock fragments. According to Pettijohn's classification, grain‐size dependent compositions vary from feldspathic litharenite (0φ fraction) via lithic arkose (1φ and 2φ) to arkose (3φ and 4φ). Compositional differences among our data set were compared to modern plutoniclastic sands from the Iberian Massif (Spain) and the St. Gabriel Mts. (California, USA), which allowed us to assess the role exerted by glaciers in generating sediments. By combining data from the MIS with those from petrographic analysis, we outlined the evolution of mineral interfaces from the parent rocks to the sediments.
A new Digital Elevation Model (DEM) of the natural landforms of Italy is presented. A methodology... more A new Digital Elevation Model (DEM) of the natural landforms of Italy is presented. A methodology is discussed to build a DEM over wide areas where elevation data from non-homogeneous (in density and accuracy) input sources are available. The input elevation data include contour lines and spot heights derived from the Italian Regional topographic maps, satellite-based global positioning system points, ground based and radar altimetry data. Owing to the great heterogeneity of the input data density, the DEM format that better preserves the original accuracy is a Triangular Irregular Network (TIN). A Delaunay-based TIN structure is improved by using the DEST algorithm that enhances input data by evaluating inferred break-lines. Accordingly to this approach, biased distributions in slopes and elevations are absent. To prevent discontinuities at the boundary between regions characterized by data with different resolution a cubic Hermite blending weight S-shaped function is adopted. The TIN of Italy consists of 1.39 ×109 triangles. The average triangle area ranges from 12 to about 13000 m2 accordingly to different morphologies and different sources. About 50% of the model has a local average triangle area <500 m2. The vertical accuracy of the obtained DEM is evaluated by more than 200000 sparse control points. The overall Root Mean Square Error (RMSE) is less than 3.5 m. The obtained national-scale DEM constitutes an useful support to carry out accurate geomorphological and geological investigations over large areas. The problem of choosing the best step size in deriving a grid from a TIN is then discussed and a method to quantify the loss of vertical information is presented as a function of the grid step. Some examples of DEM application are outlined. Under request, an high resolution stereo image database of the whole Italian territory (derived from the presented DEM) is available to browse via internet.
The use of a lava-flow simulation (DOWNFLOW) probabilistic code and airborne light detection and ... more The use of a lava-flow simulation (DOWNFLOW) probabilistic code and airborne light detection and ranging (LIDAR) technology are combined to analyze the emplacement of compound lava flow fields at Mount Etna (Sicily, Italy). The goal was to assess the hazard posed by lava flows. The LIDAR-derived time series acquired during the 2006 Mount Etna eruption records the changing topography of an active lava-flow field. These shorttime-interval, high-resolution topographic surveys provide a detailed quantitative picture of the topographic changes. The results highlight how the flow field evolves as a number of narrow (5-15 m wide) disjointed flow units that are fed simultaneously by uneven lava pulses that advance within formed channels. These flow units have widely ranging advance velocities (3-90 m/h). Overflows, bifurcations and braiding are also clearly displayed. In such a complex scenario, the suitability of deterministic codes for lava-flow simulation can be hampered by the fundamental difficulty of measuring the flow parameters (e.g. the lava discharge rate, or the lava viscosity of a single flow unit). However, the DOWNFLOW probabilistic code approaches this point statistically and needs no direct knowledge of flow parameters. DOWNFLOW intrinsically accounts for complexities and perturbations of lava flows by randomly varying the preeruption topography. This DOWNFLOW code is systematically applied here over Mount Etna, to derive a lava-flow hazard map based on: (i) the topography of the volcano; (ii) the probability density function for vent opening; and (iii) a law for the expected lava-flow length for all of the computational vents considered. Changes in the hazard due to the recent morphological evolution of Mount Etna have also been addressed.
Since the beginning of the ongoing Amatrice seismic sequence on August 24, 2016, initiated by a M... more Since the beginning of the ongoing Amatrice seismic sequence on August 24, 2016, initiated by a Mw 6.0 normal faulting earthquake, the EMERGEO Working Group (an INGV team devoted to earthquake aftermath geological survey) investigated coseismic effects on the natural environment. Up to now, we surveyed about 750 km2 and collected more than 3200 geological observations including differently oriented tectonic fractures together with intermediate-to small-sized landslides. The most impressive coseismic evidence was found along the known active Mt. Vettore fault system, where surface ruptures with clear vertical/horizontal offset were observed for more than 5 km, while unclear and discontinuous coseismic features were recorded along the Laga Mts. Fault systems.
Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate d... more Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate da modelli digitali aventi grande estensione e/o grande dettaglio. Il sistema si basa sull'applicativo gratuito Google Earth (GE) e la navigazione è immediatamente fruibile da tutti gli utenti abilitati che dispongano dei requisiti client necessari. Per innescare la navigazione dei database descritti è sufficiente caricare dentro GE un file-tarter kml da 1 Kbyte. Le immagini derivate dai vari modelli altimetrici permettono una efficace lettura ...
The 2014-2015 fissure eruption in Holuhraun started when a new code (named F-L) was being develop... more The 2014-2015 fissure eruption in Holuhraun started when a new code (named F-L) was being developed. The availability of several digital Elevation Models of the area inundated by the lava and the availability of continuously updated maps of the flow (collected in the field and through remote sensing imagery) provided an excellent opportunity for testing and calibrating the new code against an evolving flow field. Remote sensing data also provided a constrain on the effusion rate. Existing numerical codes for the simulation of lava flow emplacement are based either on the solution of some simplification of the physical governing equations of this phenomenon (the so-called " deterministic codes "-e.g. Hidaka et al. 2005; Crisci et al. 2010), or, instead, on the evidence that lava flows tend to follow the steepest descent path from the vent downhill (the so-called " probabilistic codes "-e.g. Favalli et al. 2005). F-L is a new code for the simulation of lava flows, ...
The concept: during the emplacement, lava flows settle volumes of lava all along the path. If we ... more The concept: during the emplacement, lava flows settle volumes of lava all along the path. If we found a relation between the path and the settling process, we can simulate the emplacement without tackling directly the inner lava dynamics.
Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate d... more Si presenta un metodo che permette la consultazione via Web di banche dati di immagini derivate da modelli digitali aventi grande estensione e/o grande dettaglio. Il sistema si basa sull'applicativo gratuito Google Earth (GE) e la navigazione è immediatamente fruibile da tutti gli utenti abilitati che dispongano dei requisiti client necessari. Per innescare la navigazione dei database descritti è sufficiente caricare dentro GE un file-tarter kml da 1 Kbyte. Le immagini derivate dai vari modelli altimetrici permettono una efficace lettura ...
The procedure for the derivation of a hazard map for lava flows at Mount Etna through lava flow s... more The procedure for the derivation of a hazard map for lava flows at Mount Etna through lava flow simulations is critically reviewed. The DOWNFLOW code is then used to explore the sensitivity of the hazard map with respect to input settings. Three parameters are varied within ranges close to values recently applied to derive similar hazard maps: (i) the spacing between computational vents; (ii) the spatial probability density function (PDF) for future vent opening; and (iii) the expected length of future lava flows. The effect of increasing the spacing between computational vents tends to be compensated at the lower elevations, and a vent spacing smaller than about 500 m warrants an overall difference with respect to a reference map which is smaller than 6–8%. A random subsampling of the elements used to obtain the input vent opening PDF (−20%, −40% and −60%) originates significant but drastically smaller differences in the obtained map with respect to the reference one (~10%, ~12.5% and ~17% respectively, on average). In contrast, our results show that changes in the expected flow length originate, by far, the highest changes in the obtained hazard map, with overall differences ranging between ~20% and ~65%, and between ~30% and ~95% if computed only over inhabited areas. The simulations collected are further processed to derive maps of the confluence/diffluence index,
which quantifies the error introduced, locally, when the position of the vent is misplaced by a given distance.
The database and visualization facilities of Geographic Information System (GIS) software are emp... more The database and visualization facilities of Geographic Information System (GIS) software are employed to support the analysis of rock texture from thin section by image processing. A Microscopic Information System (MIS) is hence obtained. The method is applied to transmitted light images of 137 samples obtained from 8 granitoid rocks. A slide scanner and a mount for crossed polarization are used to acquire the input images. For each thin section 5 collimated RGB images are scanned: 4 under different directions of crossed polarization and 1 without polarization. A grain segmentation procedure, based on two region growing functions is applied. The output is converted to vector format and refined using editing tools in the MIS environment, which enables a straightforward match between the input imagery and the final vectorized texture. GIS software provides optimal management of the MIS database, allowing the cumulative measurement of more than 87,000 grains.
High resolution, LIDAR-derived digital elevation models of volcanic areas can significantly impro... more High resolution, LIDAR-derived digital elevation models of volcanic areas can significantly improve knowledge of lava flow morphology and emplacement mechanisms. Here we focus on single flow units, presenting a new semi-automatic procedure which provides a quantitative analysis of their shape. The method relies on the automatic processing of the elevation profiles obtained on transects orthogonal to the flow unit axis. The initial phase of the Mount Etna flank eruption from September 2004 is taken as test case, and the procedure is applied on an active lava flow, which was emplaced on the eastern flank of the volcano. The main topographic dataset used is a 2-m-resolution digital elevation model obtained from a LIDAR survey. Starting from the axis of a lava flow unit, our method yields morphometric data on the flow unit at a 2 m spacing, calculating parameters including flow width, channel width, the heights of the levees, inward and outward slope of levees, and estimating pre-emplacement slope along the axis. The procedure is embedded in a customized GIS, which allows easy processing, handling and displaying of data. The procedure has also been applied to another flow unit emplaced during the October–November 1999 overflow from the Bocca Nuova crater. Results show that the channel width seems to accommodate first-order trends of the pre-emplacement slope along the flow unit axis, while it is little affected by high frequency changes in slope; in contrast, flow unit width and flow unit thickness are apparently influenced by small-scale changes in slope. The different emplacement conditions of the two flow units are reflected by the overall contrasting morphologies, as shown by the different average thickness and by the different ratios between (i) flow width vs. channel width and (ii) flow unit section area vs. channel width. The new method provides an enhanced, systematic and thorough morphometric description of flow units, which may improve the understanding of the emplacement mechanisms of lava flows on Earth and other planets.
In recent years, progress in geographic information systems (GIS) and remote sensing techniques h... more In recent years, progress in geographic information systems (GIS) and remote sensing techniques have allowed the mapping and studying of lava flows in unprecedented detail. A composite GIS technique is introduced to obtain high resolution boundaries of lava flow fields. This technique is mainly based on the processing of LIDAR-derived maps and digital elevation models (DEMs). The probabilistic code DOWNFLOW is then used to simulate eight large flow fields formed at Mount Etna in the last 25 years. Thanks to the collection of 6 DEMs representing Mount Etna at different times from 1986 to 2007, simulated outputs are obtained by running the DOWNFLOW code over pre-emplacement topographies. Simulation outputs are compared with the boundaries of the actual flow fields obtained here or derived from the existing literature. Although the selected fields formed in accordance with different emplacement mechanisms, flowed on different zones of the volcano over different topographies and were fed by different lava supplies of different durations, DOWNFLOW yields results close to the actual flow fields in all the cases considered. This outcome is noteworthy because DOWNFLOW has been applied by adopting a default calibration, without any specific tuning for the new cases considered here. This extensive testing proves that, if the pre-emplacement topography is available, DOWNFLOW yields a realistic simulation of a future lava flow based solely on a knowledge of the vent position. In comparison with deterministic codes, which require accurate knowledge of a large number of input parameters, DOWNFLOW turns out to be simple, fast and undemanding, proving to be ideal for systematic hazard and risk analyses.
The 10-m-resolution TINITALY/01 DEM (Tarquini et al., 2007) is compared with the two, coarserreso... more The 10-m-resolution TINITALY/01 DEM (Tarquini et al., 2007) is compared with the two, coarserresolution, global-coverage, spaceborne-based SRTM and ASTER DEMs and with a high-resolution, LIDAR-derived DEM. Afterwards, we presented a webGIS which allows to explore a 10-m-resolution anaglyph layer showing the landforms of the whole Italian territory in 3D. The webGIS (http://tinitaly. pi.ingv.it/) is open to the public, and can be used to carry out a preliminary analysis of landforms. The TINITALY/01 DEM is available for scientific purposes on the basis of a research agreement (see the above website or write to tinitaly@pi.ingv.it).
Mt. Cameroon is one of the most active effusive volcanoes in Africa. About 500,000 people living ... more Mt. Cameroon is one of the most active effusive volcanoes in Africa. About 500,000 people living or working around its fertile flanks are subject to significant threat from lava flow inundation. Lava flow hazard and risk were assessed by simulating probable lava flow paths using the DOWNFLOW code. The vent opening probability density function and lava flow length distribution were determined on the basis of available data from past eruptions at Mt. Cameroon volcano. Code calibration was performed through comparison with real lava flow paths. The topographic basis for simulations was the 90-m resolution SRTM DEM. Simulated lava flows from about 80,000 possible vents were used to produce a detailed lava flow hazard map. The lava flow risk in the area was mapped by combining the hazard map with digitized infrastructures (i.e., human settlements and roads). Results show that the risk of lava flow inundation is greatest in the most inhabited coastal areas comprising the town of Limbe, which constitutes the center of Cameroon’s oil industry and an important commercial port. Buea, the second most important town in the area, has a much lower risk although it is significantly closer to the summit of the volcano. Nonnegligible risk characterizes many villages and most roads in the area surrounding the volcano. In addition to the conventional risk mapping described above, we also present (1) two reversed risk maps (one for buildings and one for roads), where each point on the volcano is classified according to the total damage expected as a consequence of vent opening at that point; (2) maps of the lava catchments for the two main towns of Limbe and Buea, illustrating the expected damage upon venting at any point in the catchment basin. The hazard and risk maps provided here represent valuable tools for both medium/long-term land-use planning and real-time volcanic risk management and decision making.
The aim of this study is to determine and characterise the control exerted by parent rock texture... more The aim of this study is to determine and characterise the control exerted by parent rock texture on sand composition as a function of grain size. The sands investigated were generated from granitoid parent rocks by the Rhone, Damma and Sidelen glaciers, which drain the Aar Massif in the Central Alps (Switzerland), and were deposited in glacial and fluvio-glacial settings. Mechanical erosion, comminution (crystal breakdown and abrasion) and hydraulic sorting are the most important processes controlling the generation of sediments in this environment, whereas chemical and/or biochemical weathering plays a negligible role. By using a GIS-based Microscopic Information System (MIS), five samples from the glacier-drained portions of the Aar basement have been analysed to determine textural parameters such as modal composition, crystal size distribution and mineral interfaces (types and lengths). Petrographic data of analysed sands include traditional point counts (Gazzi-Dickinson method, minimum of 300 points) as well as textural counts to determine interface types, frequency, and polycrystallinity in phaneritic rock fragments. According to Pettijohn's classification, grain‐size dependent compositions vary from feldspathic litharenite (0φ fraction) via lithic arkose (1φ and 2φ) to arkose (3φ and 4φ). Compositional differences among our data set were compared to modern plutoniclastic sands from the Iberian Massif (Spain) and the St. Gabriel Mts. (California, USA), which allowed us to assess the role exerted by glaciers in generating sediments. By combining data from the MIS with those from petrographic analysis, we outlined the evolution of mineral interfaces from the parent rocks to the sediments.
A new Digital Elevation Model (DEM) of the natural landforms of Italy is presented. A methodology... more A new Digital Elevation Model (DEM) of the natural landforms of Italy is presented. A methodology is discussed to build a DEM over wide areas where elevation data from non-homogeneous (in density and accuracy) input sources are available. The input elevation data include contour lines and spot heights derived from the Italian Regional topographic maps, satellite-based global positioning system points, ground based and radar altimetry data. Owing to the great heterogeneity of the input data density, the DEM format that better preserves the original accuracy is a Triangular Irregular Network (TIN). A Delaunay-based TIN structure is improved by using the DEST algorithm that enhances input data by evaluating inferred break-lines. Accordingly to this approach, biased distributions in slopes and elevations are absent. To prevent discontinuities at the boundary between regions characterized by data with different resolution a cubic Hermite blending weight S-shaped function is adopted. The TIN of Italy consists of 1.39 ×109 triangles. The average triangle area ranges from 12 to about 13000 m2 accordingly to different morphologies and different sources. About 50% of the model has a local average triangle area <500 m2. The vertical accuracy of the obtained DEM is evaluated by more than 200000 sparse control points. The overall Root Mean Square Error (RMSE) is less than 3.5 m. The obtained national-scale DEM constitutes an useful support to carry out accurate geomorphological and geological investigations over large areas. The problem of choosing the best step size in deriving a grid from a TIN is then discussed and a method to quantify the loss of vertical information is presented as a function of the grid step. Some examples of DEM application are outlined. Under request, an high resolution stereo image database of the whole Italian territory (derived from the presented DEM) is available to browse via internet.
The use of a lava-flow simulation (DOWNFLOW) probabilistic code and airborne light detection and ... more The use of a lava-flow simulation (DOWNFLOW) probabilistic code and airborne light detection and ranging (LIDAR) technology are combined to analyze the emplacement of compound lava flow fields at Mount Etna (Sicily, Italy). The goal was to assess the hazard posed by lava flows. The LIDAR-derived time series acquired during the 2006 Mount Etna eruption records the changing topography of an active lava-flow field. These shorttime-interval, high-resolution topographic surveys provide a detailed quantitative picture of the topographic changes. The results highlight how the flow field evolves as a number of narrow (5-15 m wide) disjointed flow units that are fed simultaneously by uneven lava pulses that advance within formed channels. These flow units have widely ranging advance velocities (3-90 m/h). Overflows, bifurcations and braiding are also clearly displayed. In such a complex scenario, the suitability of deterministic codes for lava-flow simulation can be hampered by the fundamental difficulty of measuring the flow parameters (e.g. the lava discharge rate, or the lava viscosity of a single flow unit). However, the DOWNFLOW probabilistic code approaches this point statistically and needs no direct knowledge of flow parameters. DOWNFLOW intrinsically accounts for complexities and perturbations of lava flows by randomly varying the preeruption topography. This DOWNFLOW code is systematically applied here over Mount Etna, to derive a lava-flow hazard map based on: (i) the topography of the volcano; (ii) the probability density function for vent opening; and (iii) a law for the expected lava-flow length for all of the computational vents considered. Changes in the hazard due to the recent morphological evolution of Mount Etna have also been addressed.
The increasing availability of high resolution digital elevation models (DEMs) is changing our vi... more The increasing availability of high resolution digital elevation models (DEMs) is changing our viewpoint towards Earth surface landforms. Nevertheless, large-coverage, intermediate-resolution DEMs are still largely used, and can be the ideal choice in several applications based on the processing of spatiallyintegrated information. In 2012 the Istituto Nazionale di Geofisica e Vulcanologia opened a website for the free download of the “TINTALY” Digital Elevation Model (DEM), which covers the whole Italian territory. Since then, about 700 users from 28 different countries have been accredited for data download, and a report of 4 years of data dissemination and use is presented. The analysis of the intended use reveals that the 10 m-resolution, seamless TINITALY DEM is of use for an extremely assorted research community. Accredited users are working in virtually any branch of the Earth Sciences (e.g. Volcanology, Seismology, and Geomorphology), in spatially integrated humanities (e.g. History and Archaeology), and in other thematic areas such as in applied Physics and Zoology. Many users are also working in local administrations (e.g. Regions and Municipalities) for civil protection or land use planning purposes. In summary, the documented activity shows that the dissemination of seamless, large coverage elevation datasets can fertilize the technological progress of the whole society providing a significant benefit to stakeholders.
Uploads
Papers by Simone Tarquini
which quantifies the error introduced, locally, when the position of the vent is misplaced by a given distance.
which quantifies the error introduced, locally, when the position of the vent is misplaced by a given distance.
largely used, and can be the ideal choice in several applications based on the processing of spatiallyintegrated information. In 2012 the Istituto Nazionale di Geofisica e Vulcanologia opened a website for the free download of the “TINTALY” Digital Elevation Model (DEM), which covers the whole Italian territory. Since then, about 700 users from 28 different countries have been accredited for data download, and a report of 4 years of data dissemination and use is presented. The analysis of the intended use reveals that the 10 m-resolution, seamless TINITALY DEM is of use for an extremely assorted research community. Accredited users are working in virtually any branch of the Earth Sciences (e.g. Volcanology, Seismology, and Geomorphology), in spatially integrated humanities (e.g. History and Archaeology), and in other thematic areas such as in applied Physics and Zoology. Many users are also working in local administrations (e.g. Regions and Municipalities) for civil protection or land use planning purposes. In summary, the documented activity shows that the dissemination of seamless, large coverage elevation datasets can fertilize the technological progress of the whole society providing a significant benefit to stakeholders.