To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patien... more To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patients provided with mandibular implant-supported overdentures (ISOD) retained by two different attachment types, and the association of mandibular bone volume with the change in patient-reported outcome, before and after implant treatment. Thirty-four patients (mean age 60.70 ± 8.7 years) received telescopic crown or locator attachments for ISOD and completed OHIP-14 (Malaysian version) and DS questionnaires, at baseline (T0 ) with new conventional complete dentures (CCD) and 3 months (T1 ) and 3 years (T2 ) after ISOD conversion. Mandibular bone volume was calculated from cone beam computed tomography (CBCT) datasets using Mimics software. Mean changes (MC) in OHIP-14 and DS at intervals were analyzed using the Wilcoxon signed-rank test and effect size (ES). The association of bone volume, implant attachment type, and other patient variables with the change in OHIP-14 and DS were determined using multivariate linear regression analysis. The MC in OHIP-14 and DS scores from T0 to T1 and T2 showed significant improvement with moderate and large ES, respectively. Regression analyses for the change in OHIP-14 score from T0 to T2 showed significant association with implant attachment type (P = 0.043), bone volume (P = 0.004), and baseline OHIP-14 (P = 0.001), while for DS, the association was only significant with baseline DS score (P = 0.001). Improvement in patients' OHRQoL and satisfaction with ISOD was associated with their baseline ratings. Mandibular bone volume had a stronger association for improvement in OHRQoL compared to type of attachment.
The impact strength and the flexural properties of denture base materials are of importance in pr... more The impact strength and the flexural properties of denture base materials are of importance in predicting their clinical performance upon sudden loading. This study compares the impact and transverse strengths and the flexural modulus of three denture base polymers. The investigation included a relatively new microwave-polymerized polyurethane-based denture material processed by an injection-molding technique, a conventional microwave-polymerized denture material, and a heat-polymerized compression-molded poly(methyl methacrylate) (PMMA) denture material. Impact strength was determined using a Charpy-type impact tester. The transverse strength and the flexural modulus were assessed with a three-point bending test. The results were subjected to statistical analysis using a one-way analysis of variance and the Scheffé test for comparison. The impact strength of the microwave-polymerized injection-molded polymer was 6.3 kl/m2, while its flexural strength was 66.2 MPa. These values were lower than those shown by the two compression-molded PMMA-based polymers. The differences were statistically significant. The flexural modulus of the new denture material was 2,832 MPa, which was higher than the conventional heat-polymerized polymer but was comparable to the other microwave-polymerized PMMA-based polymer. The difference in the flexural modulus was statistically significant. In terms of the impact and flexural strengths, the new microwave-polymerized, injection-molded, polyurethane-based polymer offered no advantage over the existing heat- and microwave-polymerized PMMA-based denture base polymers. However, it has a rigidity comparable to that of the microwave-polymerized PMMA polymer.
To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patien... more To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patients provided with mandibular implant-supported overdentures (ISOD) retained by two different attachment types, and the association of mandibular bone volume with the change in patient-reported outcome, before and after implant treatment. Thirty-four patients (mean age 60.70 ± 8.7 years) received telescopic crown or locator attachments for ISOD and completed OHIP-14 (Malaysian version) and DS questionnaires, at baseline (T0 ) with new conventional complete dentures (CCD) and 3 months (T1 ) and 3 years (T2 ) after ISOD conversion. Mandibular bone volume was calculated from cone beam computed tomography (CBCT) datasets using Mimics software. Mean changes (MC) in OHIP-14 and DS at intervals were analyzed using the Wilcoxon signed-rank test and effect size (ES). The association of bone volume, implant attachment type, and other patient variables with the change in OHIP-14 and DS were determined using multivariate linear regression analysis. The MC in OHIP-14 and DS scores from T0 to T1 and T2 showed significant improvement with moderate and large ES, respectively. Regression analyses for the change in OHIP-14 score from T0 to T2 showed significant association with implant attachment type (P = 0.043), bone volume (P = 0.004), and baseline OHIP-14 (P = 0.001), while for DS, the association was only significant with baseline DS score (P = 0.001). Improvement in patients' OHRQoL and satisfaction with ISOD was associated with their baseline ratings. Mandibular bone volume had a stronger association for improvement in OHRQoL compared to type of attachment.
Objectives: To investigate clinical and radiographic outcomes of two adjacent short dental implan... more Objectives: To investigate clinical and radiographic outcomes of two adjacent short dental implants restored with non-splinted ceramo-metal crowns in posterior mandible, and to compare these outcomes between two implant systems during a one year period. Methods: Twenty patients (14 females, 6 males; mean age of 47.2±12.97 years) with two adjacent missing mandibular posterior teeth were recruited. Ten patients were provided with Bicon® while another ten with Ankylos® implants. All 40 implants were inserted using two-stage surgical approach with three months healing period and restored with non-splinted ceramo-metal crowns. Peri-implant parameters (plaque index, gingival index, probing depth, bleeding index, recession height, keratinized mucosal width) were evaluated one week after crown cementation (baseline) and at 2-, 6- and 12-months intervals. Implant stability was recorded using Periotest(PTV) while crown to implant ratio and vertical peri-implant marginal bone loss was evaluate...
The International journal of oral & maxillofacial implants
Purpose: This in vitro study evaluated the accuracy of multiple-unit dental implant casts obtaine... more Purpose: This in vitro study evaluated the accuracy of multiple-unit dental implant casts obtained from splinted or nonsplinted direct impression techniques using various splinting materials by comparing the casts to the reference models. The effect of two different impression materials on the accuracy of the implant casts was also evaluated for abutment-level impressions. Materials and Methods: A reference model with six internal-connection implant replicas placed in the completely edentulous mandibular arch and connected to multi-base abutments was fabricated from heat-curing acrylic resin. Forty impressions of the reference model were made, 20 each with polyether (PE) and polyvinylsiloxane (PVS) impression materials using the open tray technique. The PE and PVS groups were further subdivided into four subgroups of five each on the bases of splinting type: no splinting, bite registration PE, bite registration addition silicone, or autopolymerizing acrylic resin. The positional acc...
Objectives:To compare tensile bond strength (TBS) of four silicone-based soft liners to two dentu... more Objectives:To compare tensile bond strength (TBS) of four silicone-based soft liners to two denture base polymers (PMMA and UDMA). Methods: Four silicone-based soft liners (GC Soft(GS), GC Extrasoft (GXS), Silagum Comfort (SC) and Mollosil Plus (MP)) were processed to PMMA (IMPACT, Dental exports of london, England) and UDMA (ECLIPSE, DENTSPLY, USA) denture base polymers following the manufacturers' recommended relining method. For each soft liner-denture base combination group, 10 specimens were prepared using a custom-made brass mould. The bonding area was 10 mm in diameter and 3mm in thickness. The specimens were stored in distilled water (37C)for 24 hours before testing. The specimens were tested for T.B.S using universal testing machine (Shimatzu, Japan)and mode of failure was determined using stereomicroscope at X 10 magnification (Kyowa SD-2PL, Japan). Data were analyzed using Kruskal-Wallis and Mann-Whitney tests. Results: for PMMA group, there were significant differenc...
To assess the oral health-related quality of life (OHRQoL) of patients provided with mandibular i... more To assess the oral health-related quality of life (OHRQoL) of patients provided with mandibular implant fixed partial prostheses (IFPP) for rehabilitation of two adjacent missing posterior teeth and complete denture patients provided with mandibular implant-supported overdenture (ISOD). The response to change in OHRQoL with implant prostheses was additionally compared. In this prospective study, 20 IFPP (mean age 47.0; SD 12.9 years) and 28 ISOD (mean age 61.5; SD 9.1 years) patients received 2 mandibular implants. Metal ceramic nonsplinted fixed prostheses were provided in IFPP group, while in ISOD group, the mandibular overdentures were retained by nonsplinted attachments. Patients rated their oral health-related quality of life using OHIP-14 Malaysian version at baseline (T0), 2-3 months (T1) and 1 year (T2) postimplant treatment. Mean OHIP-14 for total and domain scores between groups and intervals was analysed using repeated-measures ANOVA and t-test. Mann-Whitney and Wilcoxon signed-rank tests were used for the comparison of mean score change and effect size, while the association between pre- and post-treatment scores was determined using multivariate linear regression modelling. The total OHIP and domain scores before implant treatment were significantly higher (lower OHRQoL) in IFPP than in ISOD groups, except for physical pain where this domain showed similar impact in both groups. Postimplant scores between groups at T1 and T2 showed no significant difference. The mean score changes at T0-T1 and T0-T2 for total OHIP-14 and domains were significantly greater in IFPP except in the domains of physical pain and disability which showed no difference. Large effect size (ES) was observed for total OHIP-14 in IFPP while moderate in ISOD. Improved OHRQoL was dependent on the treatment group and pretreatment score. Improvement in OHRQoL occurred following both mandibular implant-supported overdentures and implant fixed partial prostheses.
Objectives:To compare tensile bond strengths (TBS) of four silicone soft liners to two chemically... more Objectives:To compare tensile bond strengths (TBS) of four silicone soft liners to two chemically different denture base polymers (PMMA and UDMA). Methods: Four silicone soft liners (GC Soft(GS), GC Extrasoft (GXS), Silagum Comfort (SC) and Mollosil Plus (MP)) were processed to PMMA (IMPACT, Dental exports of london, England) and UDMA (ECLIPSE, DENTSPLY, USA) denture base polymers following the manufacturers' recommended relining method. For each soft liner-denture base combination group, 10 specimens were prepared using a custom-made brass mould. The bonding area was 10 mm in diameter and 3mm in thickness. The specimens were stored in distilled water (37C)for 24 hours before testing. The specimens were tested for TBS using universal testing machine (Shimatzu, Japan)and mode of failure was determined using stereomicroscope at X 10 magnification (Kyowa SD-2PL, Japan). Data were analyzed using Kruskal-Wallis and Mann-Whitney tests. Results: for PMMA group, there were significant d...
Quintessence international (Berlin, Germany : 1985), 2014
Short implants have been advocated as a treatment option in many clinical situations where the us... more Short implants have been advocated as a treatment option in many clinical situations where the use of conventional implants is limited. This review outlines the effectiveness and clinical outcomes of using short implants as a valid treatment option in the rehabilitation of edentulous atrophic alveolar ridges. Initially, an electronic search was performed on the following databases: Medline, PubMed, Embase, Cochrane Database of Systematic Reviews, and DARE using key words from January 1990 until May 2012. An additional hand search was included for the relevant articles in the following journals: International Journal of Oral and Maxillofacial Implants, Clinical Oral Implants Research, Journal of Clinical Periodontology, International Journal of Periodontics, Journal of Periodontology, and Clinical Implant Dentistry and Related Research. Any relevant papers from the journals' references were hand searched. Articles were included if they provided detailed data on implant length, re...
Quintessence international (Berlin, Germany : 1985), 2014
Retrieval of cement-retained implant prostheses can be more demanding than retrieval of screw-ret... more Retrieval of cement-retained implant prostheses can be more demanding than retrieval of screw-retained prostheses. This case report describes a simple and predictable procedure to locate the abutment screw access openings of cementretained implant-supported crowns in cases of fractured ceramic veneer. A conventional periapical radiography image was captured using a digital camera, transferred to a computer, and manipulated using Microsoft Word document software to estimate the location of the abutment screw access.
The impact strength and the flexural properties of denture base materials are of importance in pr... more The impact strength and the flexural properties of denture base materials are of importance in predicting their clinical performance upon sudden loading. This study compares the impact and transverse strengths and the flexural modulus of three denture base polymers. The investigation included a relatively new microwave-polymerized polyurethane-based denture material processed by an injection-molding technique, a conventional microwave-polymerized denture material, and a heat-polymerized compression-molded poly(methyl methacrylate) (PMMA) denture material. Impact strength was determined using a Charpy-type impact tester. The transverse strength and the flexural modulus were assessed with a three-point bending test. The results were subjected to statistical analysis using a one-way analysis of variance and the Scheffé test for comparison. The impact strength of the microwave-polymerized injection-molded polymer was 6.3 kl/m2, while its flexural strength was 66.2 MPa. These values were...
To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patien... more To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patients provided with mandibular implant-supported overdentures (ISOD) retained by two different attachment types, and the association of mandibular bone volume with the change in patient-reported outcome, before and after implant treatment. Thirty-four patients (mean age 60.70 ± 8.7 years) received telescopic crown or locator attachments for ISOD and completed OHIP-14 (Malaysian version) and DS questionnaires, at baseline (T0 ) with new conventional complete dentures (CCD) and 3 months (T1 ) and 3 years (T2 ) after ISOD conversion. Mandibular bone volume was calculated from cone beam computed tomography (CBCT) datasets using Mimics software. Mean changes (MC) in OHIP-14 and DS at intervals were analyzed using the Wilcoxon signed-rank test and effect size (ES). The association of bone volume, implant attachment type, and other patient variables with the change in OHIP-14 and DS were determined using multivariate linear regression analysis. The MC in OHIP-14 and DS scores from T0 to T1 and T2 showed significant improvement with moderate and large ES, respectively. Regression analyses for the change in OHIP-14 score from T0 to T2 showed significant association with implant attachment type (P = 0.043), bone volume (P = 0.004), and baseline OHIP-14 (P = 0.001), while for DS, the association was only significant with baseline DS score (P = 0.001). Improvement in patients' OHRQoL and satisfaction with ISOD was associated with their baseline ratings. Mandibular bone volume had a stronger association for improvement in OHRQoL compared to type of attachment.
The impact strength and the flexural properties of denture base materials are of importance in pr... more The impact strength and the flexural properties of denture base materials are of importance in predicting their clinical performance upon sudden loading. This study compares the impact and transverse strengths and the flexural modulus of three denture base polymers. The investigation included a relatively new microwave-polymerized polyurethane-based denture material processed by an injection-molding technique, a conventional microwave-polymerized denture material, and a heat-polymerized compression-molded poly(methyl methacrylate) (PMMA) denture material. Impact strength was determined using a Charpy-type impact tester. The transverse strength and the flexural modulus were assessed with a three-point bending test. The results were subjected to statistical analysis using a one-way analysis of variance and the Scheffé test for comparison. The impact strength of the microwave-polymerized injection-molded polymer was 6.3 kl/m2, while its flexural strength was 66.2 MPa. These values were lower than those shown by the two compression-molded PMMA-based polymers. The differences were statistically significant. The flexural modulus of the new denture material was 2,832 MPa, which was higher than the conventional heat-polymerized polymer but was comparable to the other microwave-polymerized PMMA-based polymer. The difference in the flexural modulus was statistically significant. In terms of the impact and flexural strengths, the new microwave-polymerized, injection-molded, polyurethane-based polymer offered no advantage over the existing heat- and microwave-polymerized PMMA-based denture base polymers. However, it has a rigidity comparable to that of the microwave-polymerized PMMA polymer.
To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patien... more To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patients provided with mandibular implant-supported overdentures (ISOD) retained by two different attachment types, and the association of mandibular bone volume with the change in patient-reported outcome, before and after implant treatment. Thirty-four patients (mean age 60.70 ± 8.7 years) received telescopic crown or locator attachments for ISOD and completed OHIP-14 (Malaysian version) and DS questionnaires, at baseline (T0 ) with new conventional complete dentures (CCD) and 3 months (T1 ) and 3 years (T2 ) after ISOD conversion. Mandibular bone volume was calculated from cone beam computed tomography (CBCT) datasets using Mimics software. Mean changes (MC) in OHIP-14 and DS at intervals were analyzed using the Wilcoxon signed-rank test and effect size (ES). The association of bone volume, implant attachment type, and other patient variables with the change in OHIP-14 and DS were determined using multivariate linear regression analysis. The MC in OHIP-14 and DS scores from T0 to T1 and T2 showed significant improvement with moderate and large ES, respectively. Regression analyses for the change in OHIP-14 score from T0 to T2 showed significant association with implant attachment type (P = 0.043), bone volume (P = 0.004), and baseline OHIP-14 (P = 0.001), while for DS, the association was only significant with baseline DS score (P = 0.001). Improvement in patients' OHRQoL and satisfaction with ISOD was associated with their baseline ratings. Mandibular bone volume had a stronger association for improvement in OHRQoL compared to type of attachment.
Objectives: To investigate clinical and radiographic outcomes of two adjacent short dental implan... more Objectives: To investigate clinical and radiographic outcomes of two adjacent short dental implants restored with non-splinted ceramo-metal crowns in posterior mandible, and to compare these outcomes between two implant systems during a one year period. Methods: Twenty patients (14 females, 6 males; mean age of 47.2±12.97 years) with two adjacent missing mandibular posterior teeth were recruited. Ten patients were provided with Bicon® while another ten with Ankylos® implants. All 40 implants were inserted using two-stage surgical approach with three months healing period and restored with non-splinted ceramo-metal crowns. Peri-implant parameters (plaque index, gingival index, probing depth, bleeding index, recession height, keratinized mucosal width) were evaluated one week after crown cementation (baseline) and at 2-, 6- and 12-months intervals. Implant stability was recorded using Periotest(PTV) while crown to implant ratio and vertical peri-implant marginal bone loss was evaluate...
The International journal of oral & maxillofacial implants
Purpose: This in vitro study evaluated the accuracy of multiple-unit dental implant casts obtaine... more Purpose: This in vitro study evaluated the accuracy of multiple-unit dental implant casts obtained from splinted or nonsplinted direct impression techniques using various splinting materials by comparing the casts to the reference models. The effect of two different impression materials on the accuracy of the implant casts was also evaluated for abutment-level impressions. Materials and Methods: A reference model with six internal-connection implant replicas placed in the completely edentulous mandibular arch and connected to multi-base abutments was fabricated from heat-curing acrylic resin. Forty impressions of the reference model were made, 20 each with polyether (PE) and polyvinylsiloxane (PVS) impression materials using the open tray technique. The PE and PVS groups were further subdivided into four subgroups of five each on the bases of splinting type: no splinting, bite registration PE, bite registration addition silicone, or autopolymerizing acrylic resin. The positional acc...
Objectives:To compare tensile bond strength (TBS) of four silicone-based soft liners to two dentu... more Objectives:To compare tensile bond strength (TBS) of four silicone-based soft liners to two denture base polymers (PMMA and UDMA). Methods: Four silicone-based soft liners (GC Soft(GS), GC Extrasoft (GXS), Silagum Comfort (SC) and Mollosil Plus (MP)) were processed to PMMA (IMPACT, Dental exports of london, England) and UDMA (ECLIPSE, DENTSPLY, USA) denture base polymers following the manufacturers' recommended relining method. For each soft liner-denture base combination group, 10 specimens were prepared using a custom-made brass mould. The bonding area was 10 mm in diameter and 3mm in thickness. The specimens were stored in distilled water (37C)for 24 hours before testing. The specimens were tested for T.B.S using universal testing machine (Shimatzu, Japan)and mode of failure was determined using stereomicroscope at X 10 magnification (Kyowa SD-2PL, Japan). Data were analyzed using Kruskal-Wallis and Mann-Whitney tests. Results: for PMMA group, there were significant differenc...
To assess the oral health-related quality of life (OHRQoL) of patients provided with mandibular i... more To assess the oral health-related quality of life (OHRQoL) of patients provided with mandibular implant fixed partial prostheses (IFPP) for rehabilitation of two adjacent missing posterior teeth and complete denture patients provided with mandibular implant-supported overdenture (ISOD). The response to change in OHRQoL with implant prostheses was additionally compared. In this prospective study, 20 IFPP (mean age 47.0; SD 12.9 years) and 28 ISOD (mean age 61.5; SD 9.1 years) patients received 2 mandibular implants. Metal ceramic nonsplinted fixed prostheses were provided in IFPP group, while in ISOD group, the mandibular overdentures were retained by nonsplinted attachments. Patients rated their oral health-related quality of life using OHIP-14 Malaysian version at baseline (T0), 2-3 months (T1) and 1 year (T2) postimplant treatment. Mean OHIP-14 for total and domain scores between groups and intervals was analysed using repeated-measures ANOVA and t-test. Mann-Whitney and Wilcoxon signed-rank tests were used for the comparison of mean score change and effect size, while the association between pre- and post-treatment scores was determined using multivariate linear regression modelling. The total OHIP and domain scores before implant treatment were significantly higher (lower OHRQoL) in IFPP than in ISOD groups, except for physical pain where this domain showed similar impact in both groups. Postimplant scores between groups at T1 and T2 showed no significant difference. The mean score changes at T0-T1 and T0-T2 for total OHIP-14 and domains were significantly greater in IFPP except in the domains of physical pain and disability which showed no difference. Large effect size (ES) was observed for total OHIP-14 in IFPP while moderate in ISOD. Improved OHRQoL was dependent on the treatment group and pretreatment score. Improvement in OHRQoL occurred following both mandibular implant-supported overdentures and implant fixed partial prostheses.
Objectives:To compare tensile bond strengths (TBS) of four silicone soft liners to two chemically... more Objectives:To compare tensile bond strengths (TBS) of four silicone soft liners to two chemically different denture base polymers (PMMA and UDMA). Methods: Four silicone soft liners (GC Soft(GS), GC Extrasoft (GXS), Silagum Comfort (SC) and Mollosil Plus (MP)) were processed to PMMA (IMPACT, Dental exports of london, England) and UDMA (ECLIPSE, DENTSPLY, USA) denture base polymers following the manufacturers' recommended relining method. For each soft liner-denture base combination group, 10 specimens were prepared using a custom-made brass mould. The bonding area was 10 mm in diameter and 3mm in thickness. The specimens were stored in distilled water (37C)for 24 hours before testing. The specimens were tested for TBS using universal testing machine (Shimatzu, Japan)and mode of failure was determined using stereomicroscope at X 10 magnification (Kyowa SD-2PL, Japan). Data were analyzed using Kruskal-Wallis and Mann-Whitney tests. Results: for PMMA group, there were significant d...
Quintessence international (Berlin, Germany : 1985), 2014
Short implants have been advocated as a treatment option in many clinical situations where the us... more Short implants have been advocated as a treatment option in many clinical situations where the use of conventional implants is limited. This review outlines the effectiveness and clinical outcomes of using short implants as a valid treatment option in the rehabilitation of edentulous atrophic alveolar ridges. Initially, an electronic search was performed on the following databases: Medline, PubMed, Embase, Cochrane Database of Systematic Reviews, and DARE using key words from January 1990 until May 2012. An additional hand search was included for the relevant articles in the following journals: International Journal of Oral and Maxillofacial Implants, Clinical Oral Implants Research, Journal of Clinical Periodontology, International Journal of Periodontics, Journal of Periodontology, and Clinical Implant Dentistry and Related Research. Any relevant papers from the journals' references were hand searched. Articles were included if they provided detailed data on implant length, re...
Quintessence international (Berlin, Germany : 1985), 2014
Retrieval of cement-retained implant prostheses can be more demanding than retrieval of screw-ret... more Retrieval of cement-retained implant prostheses can be more demanding than retrieval of screw-retained prostheses. This case report describes a simple and predictable procedure to locate the abutment screw access openings of cementretained implant-supported crowns in cases of fractured ceramic veneer. A conventional periapical radiography image was captured using a digital camera, transferred to a computer, and manipulated using Microsoft Word document software to estimate the location of the abutment screw access.
The impact strength and the flexural properties of denture base materials are of importance in pr... more The impact strength and the flexural properties of denture base materials are of importance in predicting their clinical performance upon sudden loading. This study compares the impact and transverse strengths and the flexural modulus of three denture base polymers. The investigation included a relatively new microwave-polymerized polyurethane-based denture material processed by an injection-molding technique, a conventional microwave-polymerized denture material, and a heat-polymerized compression-molded poly(methyl methacrylate) (PMMA) denture material. Impact strength was determined using a Charpy-type impact tester. The transverse strength and the flexural modulus were assessed with a three-point bending test. The results were subjected to statistical analysis using a one-way analysis of variance and the Scheffé test for comparison. The impact strength of the microwave-polymerized injection-molded polymer was 6.3 kl/m2, while its flexural strength was 66.2 MPa. These values were...
Uploads