جلیل اسماعیل نژاد تیمورآبادی، مهدی رازانی
چکیده
امروزه استفاده از فناوریهای نوین و روشهای نگه... more جلیل اسماعیل نژاد تیمورآبادی، مهدی رازانی
چکیده
امروزه استفاده از فناوریهای نوین و روشهای نگهداری از اشیاء ساخته شده از عاج منجر به درک بهتر و حفاظت بیخطر اشیاء شده است. هدف این مقاله امکانسنجی استفاده از روشهای جدید فناوری نمونهسازی سریع ازجمله مدلسازیهای سهبعدی و چاپگر سه بعدی FDM، جهت دستیابی به روش مناسب برای بازسازی بخشهای مفقودی و ساخت مولاژ از اشیاء عاجی با استفاده از تجهیزات موجود جهت بهکارگیری آن در مرمت و بازسازی اشیاء است. در راستای بررسی فناوری معرفیشده، یک مهره شطرنج از جنس عاج که دارای مفقودی بسیار است انتخاب شد. مهره مشابه نمونه، مرد شترسواری است که حکاکی ظریف و ریزی دارد که در مجموعه مهرههای شطرنج موجود بود. از مهره مشابه با آن مستندسازی انجام گرفت و با توجه به تصاویر موجود، مدلسازی سهبعدی با نرمافزار زیبراش که نرمافزار مخصوص حجاری و مجسمهسازی است، انجام شد. مدل سهبعدی شده با فرمت STL ذخیره شده و در نرمافزار مدیریت چاپگر سهبعدی Simplify3D در جهت مدیریت چاپ و تنظیم میزان ساپورتها بصورت دستی و تبدیل به G-Code بارگذاری شد و سپس با نازل 3/0 نمونه چاپ شد. باتوجه به حجم زیاد مفقودی اثر انتخابی و عدم سوار شدن نمونه چاپ شده برروی بدنه اصلی اثر تاریخی، تصمیم بر این شد که از نمونه موجود مولاژ تهیه شود. نتایج این تحقیق نشان داد که استفاده از مدلسازی سهبعدی با نرمافزار سهبعدی زیبراش و چاپ با چاپگر سهبعدی FDM به عنوان روش مناسب در جهت ساخت مولاژ و بازسازی قسمتهای مفقودی از اشیاء عاجی میتواند مفید واقع شود و همچنین میتوان در بازسازی قسمتهای مفقودی سایر اشیاء تاریخی-فرهنگی نیز مورد استفاده قرار بگیرد.
New studies on prehistoric obsidian artifacts and their provenance have been published by Iranian... more New studies on prehistoric obsidian artifacts and their provenance have been published by Iranian and international researchers during recent years, which showed, that some obsidian tools might have come from an unknown source located in Iran (perhaps Sahand or Sabalan Mountains). The aim of this paper is to discuss recently discovered obsidian sources in north-west Iran. After a brief introduction of recent obsidian studies in Iran the paper addresses some recent filed work and the geochemical analyses of samples from these surveys (from Tajaraq near Miyaneh and Ghizilja near Bostababad in the Bozghoosh Mountains) by using portable ED-XRF analysis. The results suggest that three major obsidian groups can be distinguished, which are classified as group A and B of Tajaraq besides a single group of Ghizilja. The implications of the new results are discussed along with actual limitations and future research directions.
کشف اتفاقی گورستان پیشازتاریخی کشیک در شهرستان نیکشهر استان سیستان و بلوچستان منجر به شناسایی آث... more کشف اتفاقی گورستان پیشازتاریخی کشیک در شهرستان نیکشهر استان سیستان و بلوچستان منجر به شناسایی آثار قابلتوجه بسیاری ازجمله فلزات، سفالهایی گوناگون و غیره گردید. در همینراستا مطالعهی حاضر برروی خمرهی منسوب به چرخهی زندگی و تعداد 9 قطعهی دیگر از سفالهای بهدستآمده که از این گورستان کشف شدند، صورت گرفته است. بههمینمنظور نمونهها با استفاده از روشهای آنالیزی و آزمایشگاهی میانرشتهای همانند پتروگرافی مقاطع نازک و آنالیز پراش پرتوایکس بهروش پودری آزمایش گردید، تا به پرسشهایی از قبیل: چگونگی فن ساخت(؟) تفاوتها و شباهتهای ساختاری(؟) و همچنین نوع کانیهای تشکیلدهندهی سفالها(؟) برای بهدست آمدن منشأ کانسارهای آنها پرداخته شود؛ ازاینرو با توجه به یکسان بودن عناصر کانیهای موجود در خاک منطقه، نتایج حاصل از روشهای فوق نشاندهندهی استفاده از خاکهایی با منشأ آبرفتی و منطقهای رودخانهی کشیک برای تمام سفالها دارد که حاکی از منشأ محلی و بومی سفالهای بررسیشده در این منطقه است؛ همچنین در ساخت سفالها هیچگونه تنوعی از کانیها مشاهده نمیشود و تمام آنها از خصوصیات کانیشن...
This paper reports the results of a recent geological and archaeological survey conducted in the ... more This paper reports the results of a recent geological and archaeological survey conducted in the Sarab district (Sabalan area) in Northwestern Iran. This survey aimed to identify potential obsidian outcrops in the region and to investigate archaeological sites in the vicinity to assess their obsidian exploitation patterns. We located a new obsidian source, Ideloo, and surveyed the previously known archaeological sites of Tepe Qalehjoogh, Kultepe Asbfrooshan, Tepe Emam Chay and Qaleh Tepe Abarghan. Here, we describe the methods and results of our surveys, along with the geochemical characterisation, using portable XRF and LA‐ICP‐MS, of both the new outcrop and the obsidian artefacts found on the sites. Our analyses have revealed the consumption of Ideloo obsidian on three of the four sites surveyed, confirming its exploitation by local communities. While validating previous assumptions regarding the existence of potential obsidian sources in Northwestern Iran, our study also highligh...
Next to the archaeological explorations, conservation and restoration of remains of monuments in ... more Next to the archaeological explorations, conservation and restoration of remains of monuments in the fields have received the attention of scientific archaeological excavations. Exposure of new finding materials to the microclimate conditions of earth surface causes to encourage their degradation process. Since a number of sites in the north and northwest of Iran encounter precipitation humidity and consequently the destruction of architecture remains, it appears that isolating outer remains of these structures using the compatible mortar is one of the best methods to reduce their damage. Lime mortar is appropriate for this purpose owing to its acceptable characteristics against the humidity. In this research, cow dung ash, rice husk ash and wood were used to optimize the lime mortar. The mix of these materials with lime paste prepared 6 different types of lime-pozzolan mortar. To determine the appropriate sample in terms of durability and consolidation against the natural cycles, a...
Abstract New excavations at prehistoric sites within Jiroft County provide a good opportunity re-... more Abstract New excavations at prehistoric sites within Jiroft County provide a good opportunity re-examining the archaeological records about the south-eastern cultures of Iran. Symbolic, decorative and carved stones are among the most important objects which have been found in Jiroft and have previously been identified as Soapstone. Geochemical analysis using QXRD, XRF and light microscopy suggests that the chlorite objects excavated from the Jiroft area appear to be mostly derived from provincial chlorite outcrops. These quarries have a type of metamorphic rocks produced by dynamothermal metasomatism along the subduction orogeny zone of Zagros. The distribution and composition of these artefacts suggests that talc and tremolite was not occurred within the samples. Therefore previously reported Soapstone from Jiroft should be redefined as chlorite with two major phases, Clinochlore and Sapphirine.
جلیل اسماعیل نژاد تیمورآبادی، مهدی رازانی
چکیده
امروزه استفاده از فناوریهای نوین و روشهای نگه... more جلیل اسماعیل نژاد تیمورآبادی، مهدی رازانی
چکیده
امروزه استفاده از فناوریهای نوین و روشهای نگهداری از اشیاء ساخته شده از عاج منجر به درک بهتر و حفاظت بیخطر اشیاء شده است. هدف این مقاله امکانسنجی استفاده از روشهای جدید فناوری نمونهسازی سریع ازجمله مدلسازیهای سهبعدی و چاپگر سه بعدی FDM، جهت دستیابی به روش مناسب برای بازسازی بخشهای مفقودی و ساخت مولاژ از اشیاء عاجی با استفاده از تجهیزات موجود جهت بهکارگیری آن در مرمت و بازسازی اشیاء است. در راستای بررسی فناوری معرفیشده، یک مهره شطرنج از جنس عاج که دارای مفقودی بسیار است انتخاب شد. مهره مشابه نمونه، مرد شترسواری است که حکاکی ظریف و ریزی دارد که در مجموعه مهرههای شطرنج موجود بود. از مهره مشابه با آن مستندسازی انجام گرفت و با توجه به تصاویر موجود، مدلسازی سهبعدی با نرمافزار زیبراش که نرمافزار مخصوص حجاری و مجسمهسازی است، انجام شد. مدل سهبعدی شده با فرمت STL ذخیره شده و در نرمافزار مدیریت چاپگر سهبعدی Simplify3D در جهت مدیریت چاپ و تنظیم میزان ساپورتها بصورت دستی و تبدیل به G-Code بارگذاری شد و سپس با نازل 3/0 نمونه چاپ شد. باتوجه به حجم زیاد مفقودی اثر انتخابی و عدم سوار شدن نمونه چاپ شده برروی بدنه اصلی اثر تاریخی، تصمیم بر این شد که از نمونه موجود مولاژ تهیه شود. نتایج این تحقیق نشان داد که استفاده از مدلسازی سهبعدی با نرمافزار سهبعدی زیبراش و چاپ با چاپگر سهبعدی FDM به عنوان روش مناسب در جهت ساخت مولاژ و بازسازی قسمتهای مفقودی از اشیاء عاجی میتواند مفید واقع شود و همچنین میتوان در بازسازی قسمتهای مفقودی سایر اشیاء تاریخی-فرهنگی نیز مورد استفاده قرار بگیرد.
New studies on prehistoric obsidian artifacts and their provenance have been published by Iranian... more New studies on prehistoric obsidian artifacts and their provenance have been published by Iranian and international researchers during recent years, which showed, that some obsidian tools might have come from an unknown source located in Iran (perhaps Sahand or Sabalan Mountains). The aim of this paper is to discuss recently discovered obsidian sources in north-west Iran. After a brief introduction of recent obsidian studies in Iran the paper addresses some recent filed work and the geochemical analyses of samples from these surveys (from Tajaraq near Miyaneh and Ghizilja near Bostababad in the Bozghoosh Mountains) by using portable ED-XRF analysis. The results suggest that three major obsidian groups can be distinguished, which are classified as group A and B of Tajaraq besides a single group of Ghizilja. The implications of the new results are discussed along with actual limitations and future research directions.
کشف اتفاقی گورستان پیشازتاریخی کشیک در شهرستان نیکشهر استان سیستان و بلوچستان منجر به شناسایی آث... more کشف اتفاقی گورستان پیشازتاریخی کشیک در شهرستان نیکشهر استان سیستان و بلوچستان منجر به شناسایی آثار قابلتوجه بسیاری ازجمله فلزات، سفالهایی گوناگون و غیره گردید. در همینراستا مطالعهی حاضر برروی خمرهی منسوب به چرخهی زندگی و تعداد 9 قطعهی دیگر از سفالهای بهدستآمده که از این گورستان کشف شدند، صورت گرفته است. بههمینمنظور نمونهها با استفاده از روشهای آنالیزی و آزمایشگاهی میانرشتهای همانند پتروگرافی مقاطع نازک و آنالیز پراش پرتوایکس بهروش پودری آزمایش گردید، تا به پرسشهایی از قبیل: چگونگی فن ساخت(؟) تفاوتها و شباهتهای ساختاری(؟) و همچنین نوع کانیهای تشکیلدهندهی سفالها(؟) برای بهدست آمدن منشأ کانسارهای آنها پرداخته شود؛ ازاینرو با توجه به یکسان بودن عناصر کانیهای موجود در خاک منطقه، نتایج حاصل از روشهای فوق نشاندهندهی استفاده از خاکهایی با منشأ آبرفتی و منطقهای رودخانهی کشیک برای تمام سفالها دارد که حاکی از منشأ محلی و بومی سفالهای بررسیشده در این منطقه است؛ همچنین در ساخت سفالها هیچگونه تنوعی از کانیها مشاهده نمیشود و تمام آنها از خصوصیات کانیشن...
This paper reports the results of a recent geological and archaeological survey conducted in the ... more This paper reports the results of a recent geological and archaeological survey conducted in the Sarab district (Sabalan area) in Northwestern Iran. This survey aimed to identify potential obsidian outcrops in the region and to investigate archaeological sites in the vicinity to assess their obsidian exploitation patterns. We located a new obsidian source, Ideloo, and surveyed the previously known archaeological sites of Tepe Qalehjoogh, Kultepe Asbfrooshan, Tepe Emam Chay and Qaleh Tepe Abarghan. Here, we describe the methods and results of our surveys, along with the geochemical characterisation, using portable XRF and LA‐ICP‐MS, of both the new outcrop and the obsidian artefacts found on the sites. Our analyses have revealed the consumption of Ideloo obsidian on three of the four sites surveyed, confirming its exploitation by local communities. While validating previous assumptions regarding the existence of potential obsidian sources in Northwestern Iran, our study also highligh...
Next to the archaeological explorations, conservation and restoration of remains of monuments in ... more Next to the archaeological explorations, conservation and restoration of remains of monuments in the fields have received the attention of scientific archaeological excavations. Exposure of new finding materials to the microclimate conditions of earth surface causes to encourage their degradation process. Since a number of sites in the north and northwest of Iran encounter precipitation humidity and consequently the destruction of architecture remains, it appears that isolating outer remains of these structures using the compatible mortar is one of the best methods to reduce their damage. Lime mortar is appropriate for this purpose owing to its acceptable characteristics against the humidity. In this research, cow dung ash, rice husk ash and wood were used to optimize the lime mortar. The mix of these materials with lime paste prepared 6 different types of lime-pozzolan mortar. To determine the appropriate sample in terms of durability and consolidation against the natural cycles, a...
Abstract New excavations at prehistoric sites within Jiroft County provide a good opportunity re-... more Abstract New excavations at prehistoric sites within Jiroft County provide a good opportunity re-examining the archaeological records about the south-eastern cultures of Iran. Symbolic, decorative and carved stones are among the most important objects which have been found in Jiroft and have previously been identified as Soapstone. Geochemical analysis using QXRD, XRF and light microscopy suggests that the chlorite objects excavated from the Jiroft area appear to be mostly derived from provincial chlorite outcrops. These quarries have a type of metamorphic rocks produced by dynamothermal metasomatism along the subduction orogeny zone of Zagros. The distribution and composition of these artefacts suggests that talc and tremolite was not occurred within the samples. Therefore previously reported Soapstone from Jiroft should be redefined as chlorite with two major phases, Clinochlore and Sapphirine.
Shahr-I Sokhta is a historical settlement in south-eastern of Iran in the province of sistan-balu... more Shahr-I Sokhta is a historical settlement in south-eastern of Iran in the province of sistan-baluchestan, where the first settlement history goes back to 3200 BC. The results of excavations show four cultural-settlement period (I-IV) in this city that is divided into 11 phases. Period (II) goes back to 2500-2800 BC. The history of period (III) is equivalent to 2300-2500 BC, and history of period (IV) is suggested between 1750 and 1800 BC. This archaeological site is located 57 km from Zabol-Zahedan road. This site is registered as seventeenth heritage of Iran in UNESCO. One of the prominent features of this archaeological area is the existence of a lot of pottery shards on the surface of hills. Most of these pottery shards are buff color and have extensive domain from light buff to brick and greenish. Also, red and grey potteries have put in the next classification which the number of them is so little. Archaeological excavations carried out in this site pulled out thousands of pottery shards from the soil that are mostly buff-colored pastes. Also, among the pottery remnants of this 150 hectare site, clay pottery with red and gray paste have been seen. Archaeologists believe that most of the buff pottery shards are locally made. Hence, to determine whether this hypothesis is true, a scientific analysis was done to determine the chemical compositions of the pottery shards. In this paper, 15 pottery sample have been selected which all of them belong to settlement period II-III and goes back to 2200-2800 BC. The samples was tested using instrument analysis XRF to determine the major and trace elements of these potteries. The results analyzed using hierarchical cluster analysis (HCA) to specify pieces of pottery in two group local and nonnative. The results show that most of pottery is locating in a specific group with name of production group, where the samples no. 18259-9, 18265-10, 18266-13, 18273-4, 18271-15 are not locally made and located in another group. Based on the instrumental results, red and grey pottery are not related to Shahr-I Sokhta and probably these potteries are imported from another place.
Archaeological sites in desert areas are at risk for destroying and reburied with sand dunes by s... more Archaeological sites in desert areas are at risk for destroying and reburied with sand dunes by sand storms. One of the most important issues for archaeologist and conservators in these regions are maintenance of archaeological remains, during the excavation process and after it, There are several sand dune stabilization methods such as mechanical dune stabilization, mulch or protective screen, aerodynamic method and biological fixation (woody and grassy species, planting). However they are mostly expensive and time consuming and may have some harmful effects on environment. In this regard, the bio-grouting technique which produce calcite cements are new approaches to consolidate land in geotechnical engineering. This method has created a potential for archaeological conservation, stabilization procedure for sand dunes or soil. This method works according to the chemical reactions of natural non-pathogenic microorganisms that exist in the soil. The main objective of this research work is to evaluate the possibility of using biological stabilization with calcite-forming bacteria, for consolidating of sand dunes in desert areas with an approach in the conservation of archaeological remains, and archaeological conservation during and after the excavations. In this case sand grains/soil particles are coagulated and make a more dense soil with higher mechanical properties than natural condition. Biological stabilization of sand dunes and soil has been conducted with Sporosarcina Pasteurii Bacteria. When this bacteria supplies with suitable substrates, micro-organisms can catalyze chemical reactions in the subsurface resulting in precipitation of inorganic minerals. These bacteria could microbially catalyze hydrolysis of urea and calcium carbonate reaction when it is cultivated with enough nutritions under proper environmental conditions at laboratory and then it is located on the soil surface with other reactive substances. It results a scaffolding calcite between soil/sand particles. The best reactive environment is achieved at pH 7-9, temperature of 25 °C to examine the depth of penetration of biogrout, a cylindrical mold (PVC) tube (by 1 meter high) is filled with dry sand and consolidates with bio-grouts. The results show that the measured depth of bio-consolidation is 50cm in dry sand. Soil density is 1.6gr/cm3; the permeability of soil is smaller than the normal condition. To control the functional rate and also surface resistance of biogrouted sand, the standard penetration test with 250 g plummet in the dry and wet conditions have been examined. The results of this test show that bio-consolidation was successfully conducted and depth of plummet penetration becomes negligible.
Kandovan historical village, in the vicinity of Osku town is one of the most important attractive... more Kandovan historical village, in the vicinity of Osku town is one of the most important attractive sites in East Azerbaijan province which is outstanding and prominent due to the hewn-cut house of rock skirt of the Sahand volcano. This site has been registered in 1998 on the national cultural heritage list of Iran. Kandovan rocky architecture, from geological point of view, is on the surfaces of a thick ignimbrite layer that this layer, due to natural weathering and erosion along the main joints and discontinuities of Kandovan valley, has created conical forms and structures. According to the existing theory, Kandovan village was inhabited and settled in these conical buildings since the Ilkhanid era. Recent developments on rock decay in rock-cut architecture of the Kandovan historical village, have heightened the need for recognizing the role of different factors of weathering process on this site. Therefore, the main objective of this study was to assess the effect of inherent vice as a fundamental factor in deterioration patterns. For this purpose, field and laboratory investigations like sampling and observation, characterization with thin section petrography and X-ray diffraction analyzes, along with the measurement of physical properties and durability of rock in rocky houses, the role of inherent vice rock with intensity of rock mass Kandovan weathering has been done. Nowadays, intensity of decay and weathering in Kandovan village rocks causes of poor living conditions, ruination, and seasonal residence or nonresidential conditions. Based on the rock characterization, water absorption, dry density, total porosity content, saturation coefficient, slake durability and experiment for resistance to freezing-thawing demonstrated that Kandovan ignimbrite rock have poor durability and high sensitive to predisposing factors to deterioration such as wetting and drying and freezing-thawing cycles. The collection of these inherent properties causes of the internal structure to be non-resistance to the tensions arising from the impact of climate cycles. The local climate could be considered (or suggested) as the main reason of weathering and erosion of this rocky architecture.
Uploads
Papers by Mehdi Razani
چکیده
امروزه استفاده از فناوریهای نوین و روشهای نگهداری از اشیاء ساخته شده از عاج منجر به درک بهتر و حفاظت بیخطر اشیاء شده است. هدف این مقاله امکانسنجی استفاده از روشهای جدید فناوری نمونهسازی سریع ازجمله مدلسازیهای سهبعدی و چاپگر سه بعدی FDM، جهت دستیابی به روش مناسب برای بازسازی بخشهای مفقودی و ساخت مولاژ از اشیاء عاجی با استفاده از تجهیزات موجود جهت بهکارگیری آن در مرمت و بازسازی اشیاء است. در راستای بررسی فناوری معرفیشده، یک مهره شطرنج از جنس عاج که دارای مفقودی بسیار است انتخاب شد. مهره مشابه نمونه، مرد شترسواری است که حکاکی ظریف و ریزی دارد که در مجموعه مهرههای شطرنج موجود بود. از مهره مشابه با آن مستندسازی انجام گرفت و با توجه به تصاویر موجود، مدلسازی سهبعدی با نرمافزار زیبراش که نرمافزار مخصوص حجاری و مجسمهسازی است، انجام شد. مدل سهبعدی شده با فرمت STL ذخیره شده و در نرمافزار مدیریت چاپگر سهبعدی Simplify3D در جهت مدیریت چاپ و تنظیم میزان ساپورتها بصورت دستی و تبدیل به G-Code بارگذاری شد و سپس با نازل 3/0 نمونه چاپ شد. باتوجه به حجم زیاد مفقودی اثر انتخابی و عدم سوار شدن نمونه چاپ شده برروی بدنه اصلی اثر تاریخی، تصمیم بر این شد که از نمونه موجود مولاژ تهیه شود. نتایج این تحقیق نشان داد که استفاده از مدلسازی سهبعدی با نرمافزار سهبعدی زیبراش و چاپ با چاپگر سهبعدی FDM به عنوان روش مناسب در جهت ساخت مولاژ و بازسازی قسمتهای مفقودی از اشیاء عاجی میتواند مفید واقع شود و همچنین میتوان در بازسازی قسمتهای مفقودی سایر اشیاء تاریخی-فرهنگی نیز مورد استفاده قرار بگیرد.
کلید واژگان: عاج، مدلسازی، حفاظت- مرمت، بازسازی سهبعدی، مولاژ، چاپگر سه بعدی
چکیده
امروزه استفاده از فناوریهای نوین و روشهای نگهداری از اشیاء ساخته شده از عاج منجر به درک بهتر و حفاظت بیخطر اشیاء شده است. هدف این مقاله امکانسنجی استفاده از روشهای جدید فناوری نمونهسازی سریع ازجمله مدلسازیهای سهبعدی و چاپگر سه بعدی FDM، جهت دستیابی به روش مناسب برای بازسازی بخشهای مفقودی و ساخت مولاژ از اشیاء عاجی با استفاده از تجهیزات موجود جهت بهکارگیری آن در مرمت و بازسازی اشیاء است. در راستای بررسی فناوری معرفیشده، یک مهره شطرنج از جنس عاج که دارای مفقودی بسیار است انتخاب شد. مهره مشابه نمونه، مرد شترسواری است که حکاکی ظریف و ریزی دارد که در مجموعه مهرههای شطرنج موجود بود. از مهره مشابه با آن مستندسازی انجام گرفت و با توجه به تصاویر موجود، مدلسازی سهبعدی با نرمافزار زیبراش که نرمافزار مخصوص حجاری و مجسمهسازی است، انجام شد. مدل سهبعدی شده با فرمت STL ذخیره شده و در نرمافزار مدیریت چاپگر سهبعدی Simplify3D در جهت مدیریت چاپ و تنظیم میزان ساپورتها بصورت دستی و تبدیل به G-Code بارگذاری شد و سپس با نازل 3/0 نمونه چاپ شد. باتوجه به حجم زیاد مفقودی اثر انتخابی و عدم سوار شدن نمونه چاپ شده برروی بدنه اصلی اثر تاریخی، تصمیم بر این شد که از نمونه موجود مولاژ تهیه شود. نتایج این تحقیق نشان داد که استفاده از مدلسازی سهبعدی با نرمافزار سهبعدی زیبراش و چاپ با چاپگر سهبعدی FDM به عنوان روش مناسب در جهت ساخت مولاژ و بازسازی قسمتهای مفقودی از اشیاء عاجی میتواند مفید واقع شود و همچنین میتوان در بازسازی قسمتهای مفقودی سایر اشیاء تاریخی-فرهنگی نیز مورد استفاده قرار بگیرد.
کلید واژگان: عاج، مدلسازی، حفاظت- مرمت، بازسازی سهبعدی، مولاژ، چاپگر سه بعدی