ABSTRACT Web 2.0 has redefined the meaning of learning. Students do not need to learn in the same... more ABSTRACT Web 2.0 has redefined the meaning of learning. Students do not need to learn in the same place at the same time, listening to a teacher. This paper explores an innovative educational use of a wiki as a learning tool in a Master’s Degree at the University of Zaragoza. Students have learned when and where they wanted and then they have published their reflections in a wiki. In the classroom we worked in little groups or collectively debate different points of view. We present an analysis of the experience and some improvement proposals of the 2011-12 academic year.
International Journal of Engineering Education, 2016
The objective of this work is to present an approach to increase the number of students who could... more The objective of this work is to present an approach to increase the number of students who could be accommodated in alaboratory for gear measuring course without the need to increase the number of physical equipment. The approach isbased on a remote control freeware application, and special design of the locations of the audiovisual media. Studentsparticipated in a real time measuring process from their own computers under the supervision of the instructor. Themethodology was assessed by means of a class experience in a measurement laboratory, where a group of students attendedthe explanations of two lecturers. During the session, the participants were able to control a coordinate measuring machinefrom their laptops. Finally, students’ satisfaction was assessed with a questionnaire based on five-level Likert items,obtaining positive results.
Process and device image capture plant through clamping means and voltage of an elastic membrane,... more Process and device image capture plant through clamping means and voltage of an elastic membrane, as well as machining duplex template obtained in the process. Process image capture plant through clamping means and voltage of an elastic membrane, as well as machining duplex template obtained materialized in two adjustable horizontal bars on the scanner, where a membrane is placed between said horizontal bars and it is fastened by flat bars T, regulating the tension of the membrane through a crank, placing the foot on the membrane, capturing the image and machining template duplex through the image of the surface given format STL with a tether which allows the turning of the parts to 180 °. The device used comprises a plurality of support bars with two adjustable horizontal bars, wherein the elastic membrane is adjusted and tensioned by flat bars in T and a crank.
Current research based on positive results and obtained experience of a previous publication has ... more Current research based on positive results and obtained experience of a previous publication has developed a trainingcourse of metrology based on sustainable characteristics such as remote control freeware applications, share of valuableresources, distance learning methodology and active participation of the students. This is based on a remote controloperation using special software, with a real CMM. Although the CMM was placed at the University of Zaragoza (Spain),ten students from Greece, with the valuable help of a remote control freeware application, participated in real timemeasuring process from their own computers under the supervision of two instructors. The results of the remote operationof the CMM were very successful. A feeling of responsibility for using a remote piece of equipment and the extra care thatthe students should prove created a more stimulating learning environment. Moreover, according to the students’ opinion,the process as a whole was impressive and provide...
ESTE TRABAJO PRESENTA EL MARCO CONCEPTUAL Y LAS ACTIVIDADES DESARROLLADAS EN LA CONCEPCION, DISEN... more ESTE TRABAJO PRESENTA EL MARCO CONCEPTUAL Y LAS ACTIVIDADES DESARROLLADAS EN LA CONCEPCION, DISENO, PRODUCCION Y EXPERIMENTACION DE MODULOS DE DIDACTICA DE LA TECNOLOGIA, INCLUYE TANTO LA FORMACION COMO LA GESTION ACADEMICO- ADMINISTRATIVA INTEGRADA DE LOS CENTROS EDUCATIVOS, CON UNA METODOLOGIA EXTENSIBLE A CUALQUIER TIPO DE EMPRESAS. PARA COMENZAR, SE PRESENTA UNA PANORAMICA GENERAL Y RESUMIDA DE LAS APLICACIONES INFORMATICAS PARA LA EDUCACION, ESPECIALMENTE TECNOLOGICA. COMENTA ALGUNOS ASPECTOS QUE FAVORECEN LA ADOPCION DE UN SOFTWARE ESPECIFICO PARA LA EDUCACION, SIN QUE POR ELLO SE ABANDONE EL ADIESTRAMIENTO EN LOS PROGRAMAS CON DESTINO INDUSTRIAL, PARA LO CUAL TOMAREMOS COMO REFERENTE PRINCIPAL LA FABRICACION MECANICA. COMENTA ALGUNAS TEORIAS EDUCATIVAS UTILIZADAS COMO SOPORTE FILOSOFICO PARA LA EJECUCION DE PROGRAMAS INFORMATICAS CON DESTINO AL MUNDO EDUCATIVO. PARTEN DE UNAS HIPOTESIS, SEGUN EL ESTADO EVOLUTIVO DEL CONOCIMIENTO EN LA SOCIEDAD EN LA QUE SE DESARROLLAN (ENTORNO); POR LO TANTO HABRAN DE SER TOMADAS CON LA DEBIDA PRECAUCION, TRATANDO DE OBTENER DE ELLAS LO POSITIVO QUE SE ADAPTE A NUESTRA SITUACION ACTUAL. SE ADECUAN LOS PROGRAMAS DE ORDENADOR CON DESTINO A LA DOCENCIA TECNOLOGICA CON LAS TEORIAS EDUCATIVAS MAS ACEPTADAS, ASI COMO LA PROPUESTA DE CADA TIPO DE PROGRAMA SEGUN LOS ESTADIOS EN LA ADQUISICION DEL CONOCIMIENTO DEL ALUMNADO. CABE LA POSIBILIDAD DE PREGUNTARNOS POR LA ESTRATEGIA A SEGUIR PARA UTILIZAR LA INFORMATICA, LA MODELIZACION O LOS MEDIOS AUDIOVISUALES EN UN ENTORNO EDUCATIVO RELACIONADO CON LA FABRICACION MECANICA Y CON LA TECNOLOGIA EN GENERAL. ADEMAS DEBEMOS PROPONER UNA SERIE DE EJEMPLOS QUE, EN UNA EVOLUCION CRONOLOGICA, HEMOS DESARROLLADO, CON LA IMPORTANCIA QUE CREEMOS TIENEN LOS ASPECTOS FUNCIONALES, ORGANIZATIVOS Y CONCEPTUALES DE ESTE SOFTWARE. SE ANALIZAN LOS CRITERIOS Y FUNDAMENTOS DE LA ESTRUCTURA DE ARCHIVOS. ELLO ES IMPRESCINDIBLE PARA CREAR UNA LINEA DE PROGRAMAS INF
The International Journal of Advanced Manufacturing Technology, 2006
Obtaining an aerodynamic profile, such as the ring-frame of a wing or a propeller, is a task whic... more Obtaining an aerodynamic profile, such as the ring-frame of a wing or a propeller, is a task which is, nowadays, given to computer-aided manufacturing (CAM) programs that provide a large number of points for defining the tool path. Finding a method to optimize the quantity of these points is not always easy, due especially to the bend radius equations and,
ABSTRACT Web 2.0 has redefined the meaning of learning. Students do not need to learn in the same... more ABSTRACT Web 2.0 has redefined the meaning of learning. Students do not need to learn in the same place at the same time, listening to a teacher. This paper explores an innovative educational use of a wiki as a learning tool in a Master’s Degree at the University of Zaragoza. Students have learned when and where they wanted and then they have published their reflections in a wiki. In the classroom we worked in little groups or collectively debate different points of view. We present an analysis of the experience and some improvement proposals of the 2011-12 academic year.
International Journal of Engineering Education, 2016
The objective of this work is to present an approach to increase the number of students who could... more The objective of this work is to present an approach to increase the number of students who could be accommodated in alaboratory for gear measuring course without the need to increase the number of physical equipment. The approach isbased on a remote control freeware application, and special design of the locations of the audiovisual media. Studentsparticipated in a real time measuring process from their own computers under the supervision of the instructor. Themethodology was assessed by means of a class experience in a measurement laboratory, where a group of students attendedthe explanations of two lecturers. During the session, the participants were able to control a coordinate measuring machinefrom their laptops. Finally, students’ satisfaction was assessed with a questionnaire based on five-level Likert items,obtaining positive results.
Process and device image capture plant through clamping means and voltage of an elastic membrane,... more Process and device image capture plant through clamping means and voltage of an elastic membrane, as well as machining duplex template obtained in the process. Process image capture plant through clamping means and voltage of an elastic membrane, as well as machining duplex template obtained materialized in two adjustable horizontal bars on the scanner, where a membrane is placed between said horizontal bars and it is fastened by flat bars T, regulating the tension of the membrane through a crank, placing the foot on the membrane, capturing the image and machining template duplex through the image of the surface given format STL with a tether which allows the turning of the parts to 180 °. The device used comprises a plurality of support bars with two adjustable horizontal bars, wherein the elastic membrane is adjusted and tensioned by flat bars in T and a crank.
Current research based on positive results and obtained experience of a previous publication has ... more Current research based on positive results and obtained experience of a previous publication has developed a trainingcourse of metrology based on sustainable characteristics such as remote control freeware applications, share of valuableresources, distance learning methodology and active participation of the students. This is based on a remote controloperation using special software, with a real CMM. Although the CMM was placed at the University of Zaragoza (Spain),ten students from Greece, with the valuable help of a remote control freeware application, participated in real timemeasuring process from their own computers under the supervision of two instructors. The results of the remote operationof the CMM were very successful. A feeling of responsibility for using a remote piece of equipment and the extra care thatthe students should prove created a more stimulating learning environment. Moreover, according to the students’ opinion,the process as a whole was impressive and provide...
ESTE TRABAJO PRESENTA EL MARCO CONCEPTUAL Y LAS ACTIVIDADES DESARROLLADAS EN LA CONCEPCION, DISEN... more ESTE TRABAJO PRESENTA EL MARCO CONCEPTUAL Y LAS ACTIVIDADES DESARROLLADAS EN LA CONCEPCION, DISENO, PRODUCCION Y EXPERIMENTACION DE MODULOS DE DIDACTICA DE LA TECNOLOGIA, INCLUYE TANTO LA FORMACION COMO LA GESTION ACADEMICO- ADMINISTRATIVA INTEGRADA DE LOS CENTROS EDUCATIVOS, CON UNA METODOLOGIA EXTENSIBLE A CUALQUIER TIPO DE EMPRESAS. PARA COMENZAR, SE PRESENTA UNA PANORAMICA GENERAL Y RESUMIDA DE LAS APLICACIONES INFORMATICAS PARA LA EDUCACION, ESPECIALMENTE TECNOLOGICA. COMENTA ALGUNOS ASPECTOS QUE FAVORECEN LA ADOPCION DE UN SOFTWARE ESPECIFICO PARA LA EDUCACION, SIN QUE POR ELLO SE ABANDONE EL ADIESTRAMIENTO EN LOS PROGRAMAS CON DESTINO INDUSTRIAL, PARA LO CUAL TOMAREMOS COMO REFERENTE PRINCIPAL LA FABRICACION MECANICA. COMENTA ALGUNAS TEORIAS EDUCATIVAS UTILIZADAS COMO SOPORTE FILOSOFICO PARA LA EJECUCION DE PROGRAMAS INFORMATICAS CON DESTINO AL MUNDO EDUCATIVO. PARTEN DE UNAS HIPOTESIS, SEGUN EL ESTADO EVOLUTIVO DEL CONOCIMIENTO EN LA SOCIEDAD EN LA QUE SE DESARROLLAN (ENTORNO); POR LO TANTO HABRAN DE SER TOMADAS CON LA DEBIDA PRECAUCION, TRATANDO DE OBTENER DE ELLAS LO POSITIVO QUE SE ADAPTE A NUESTRA SITUACION ACTUAL. SE ADECUAN LOS PROGRAMAS DE ORDENADOR CON DESTINO A LA DOCENCIA TECNOLOGICA CON LAS TEORIAS EDUCATIVAS MAS ACEPTADAS, ASI COMO LA PROPUESTA DE CADA TIPO DE PROGRAMA SEGUN LOS ESTADIOS EN LA ADQUISICION DEL CONOCIMIENTO DEL ALUMNADO. CABE LA POSIBILIDAD DE PREGUNTARNOS POR LA ESTRATEGIA A SEGUIR PARA UTILIZAR LA INFORMATICA, LA MODELIZACION O LOS MEDIOS AUDIOVISUALES EN UN ENTORNO EDUCATIVO RELACIONADO CON LA FABRICACION MECANICA Y CON LA TECNOLOGIA EN GENERAL. ADEMAS DEBEMOS PROPONER UNA SERIE DE EJEMPLOS QUE, EN UNA EVOLUCION CRONOLOGICA, HEMOS DESARROLLADO, CON LA IMPORTANCIA QUE CREEMOS TIENEN LOS ASPECTOS FUNCIONALES, ORGANIZATIVOS Y CONCEPTUALES DE ESTE SOFTWARE. SE ANALIZAN LOS CRITERIOS Y FUNDAMENTOS DE LA ESTRUCTURA DE ARCHIVOS. ELLO ES IMPRESCINDIBLE PARA CREAR UNA LINEA DE PROGRAMAS INF
The International Journal of Advanced Manufacturing Technology, 2006
Obtaining an aerodynamic profile, such as the ring-frame of a wing or a propeller, is a task whic... more Obtaining an aerodynamic profile, such as the ring-frame of a wing or a propeller, is a task which is, nowadays, given to computer-aided manufacturing (CAM) programs that provide a large number of points for defining the tool path. Finding a method to optimize the quantity of these points is not always easy, due especially to the bend radius equations and,
Uploads
Papers by Huertas Talón