Revista Brasileira de Ciências Ambientais (Online), 2012
Neste trabalho buscou-se estabelecer um procedimento a ser utilizado por parte dos auditores que ... more Neste trabalho buscou-se estabelecer um procedimento a ser utilizado por parte dos auditores que realizam Auditoria Ambiental Compulsória, para que realizem também auditoria de Segurança Ocupacional dentro do contexto da gestão ambiental. Para se alcançar este objetivo, listas de verificação pautadas nas Normas Regulamentadoras do Ministério do Trabalho foram elaboradas, além da adoção de indicadores de sustentabilidade. Esta ferramenta permite fornecer aos auditores, instrumentos práticos para a realização do procedimento de Auditoria Ambiental Compulsória, principalmente para aqueles que não possuem familiaridade com as legislações correlatas, pois podem utilizar esta ferramenta como um auxílio na avaliação das atividades que causam perigos e danos ao trabalhador, considerando as atividades potencialmente poluidoras realizadas nos empreendimentos. O método utilizado neste trabalho consistiu na elaboração de listas de verificação que foram utilizadas como referência no procedimento...
Civil construction activities in large infrastructure works are used to present high probability ... more Civil construction activities in large infrastructure works are used to present high probability to cause labor accidents. This paper aims to analyze the safety hazards associated with workmanship of gabions. Using the Preliminary Hazard Analysis technique (PHA), a form based in the Failure Mode and Effects Analysis (FMEA) technique was developed. The PHA technique was applied in a field research in order to identify work safety hazards. The FMEA form developed was adapted for future implementation, prioritizing reducing the risk of accidents and the performance of the security sector through preventive actions in order to minimize the impact of potential accidents. The identification and further prevention of safety is simple by using the PHA technique. After the adequacy of the methodology of FMEA risk assessment, it was concluded that the proposed tool helps identify hazards and allows a general diagnosis and consistent with the current hazards of the company.
Due to the growth in demand for construction works in Brazil, there has been an increase in waste... more Due to the growth in demand for construction works in Brazil, there has been an increase in waste generation. In order to investigate if the contamination of wood waste in construction sites could represent an environmental risk, field surveys observing qualitative and quantitative aspects were conducted. Analysis of wood waste from six construction sites in the city of Curitiba, Brazil, allowed for the infer that the most frequently found contaminants were mortar and metal pins at 59%, and that 64% of the samples were contaminated with more than two contaminants. As disposal solution, all the studied cases use potteries to discard its wood wastes. A worrying result is that 18% of samples were contaminated by a release agent-ink or varnish. These samples possibly could have been burned in potteries without an effective air pollution control. Another conclusion of the survey is that the waste management in the construction site is usually promoted by a layperson.
The construction industry, more specifically the heavy construction subsector, contributes to the... more The construction industry, more specifically the heavy construction subsector, contributes to the socioeconomic development of the population. On the other hand, it causes negative impacts on the consumption of natural resources and produces the large quantity of waste, including Personal Protective Equipment (PPE) which not more may be used. The overall intention of this work is to investigate the current situation of the management and disposal of Personal Protective Equipment in heavy construction works. The research method consisted in identifying and listing functions typical of heavy construction work and their protective equipment, classification of the PPEs used in the heavy construction subsector, and destination of this equipment when no longer used, in three different studies in Brazil. The studies showed that the law is followed and PPEs are designed according to the law. It was found that the final destination used by most builders were landfills. As for the recycling o...
The sustainability analysis must not be restricted on evaluating the carbon emissions to the atmo... more The sustainability analysis must not be restricted on evaluating the carbon emissions to the atmosphere. To achieve an acceptable way of sustainable development on construction or demolition works, the engineers must incorporate other practices including the waste management. This research intends to investigate the sustainability of the Brazilian construction and demolition waste management system whose first law in 2012 completed ten years. It was analyzed 38 engineering works through residential and commercial endeavors. It was investigated administrative and executive routines, difficulties during the endeavor licensing to the municipality, and operational questions. The chosen works are located in Curitiba, Parana, Brazil and have from 6.000m² to 100.000m² of constructed area. The results show that Brazilian experience has a lot of good points including the systematization of procedures, the identification of responsibilities, the sharing of tasks and the establishing of punish...
Despite the significant representation of construction industry in Brazilian economy, the waste g... more Despite the significant representation of construction industry in Brazilian economy, the waste generated by the sector represents one of the aspects that cause more damage to society and environment. This situation is a result of deficiency in the management of construction waste that leads to inadequate treatment and disposal of waste. According to researches, the volume of building waste represents approximately 67% of municipal solid waste generated in the country. In this context, reverse logistics has been seen as an alternative to proper management, when properly planned and executed. Since its obligation, by Law 12.305/2010, establishing the National Policy of Solid Waste (PNRS), reverse logistics has brought concerns to productive sector because of some difficulties inherent in the implementation of this system. In this context, this paper aims to examine the available literature on the subject and assess main barriers found for application of reverse logistics in construct...
Revista Brasileira de Gestão Ambiental e Sustentabilidade, 2021
Current building management standards demand that construction waste management occurs in the pla... more Current building management standards demand that construction waste management occurs in the planning phase. This paper presents the development of a plug-in as a BIM tool to predict waste generation. As a research strategy, the plug-in was applied to a single-family housing project, the respective construction wastes were predicted in the BIM technology and compared to the literature. Through waste generation indexes, some planning indicators were calculated. The identified wastes were automatically classified, and a management structure was designed. The study showed that the best results are obtained when the construction waste is estimated from Actual Built Volume instead of Apparent Constructed Volume like the traditional models uses. In conclusion, adopting a plug-in do predict construction waste has proved to be advantageous. A specific advantage of the proposed method is that the plug-in user may adopt their waste generation indexes according to the regional and the product...
Frontiers in Engineering and Built Environment, 2021
PurposeThe construction sector is increasingly engaged to explore the potential application of bu... more PurposeThe construction sector is increasingly engaged to explore the potential application of building information modelling (BIM) for the sustainability of the buildings. BIM can be applied conjugated to certification methods to evaluate the sustainability of the buildings, and it is known as building sustainability assessment (BSA). This article aims to explore applications of BIM in the sustainability analysis of buildings, including five types of BSA.Design/methodology/approachA literature review from 2009 to 2020 considering a combination of search terms related to BIM and BSA complemented the analysis. The bibliometric analysis indicates an increase in the number of publications on this topic of study in the last five years. A peak occurred in 2015 and 2020, with 51 and 66 publications, respectively.FindingsThe results showed that BIM contributes to achieving part of the sustainability requirements from BSA, especially quantitative requirements that are related to material an...
Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasi... more Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasil há mais de uma década. O intuito dessa gestão é amenizar os impactos ambientais decorrentes do gerenciamento indevido desses resíduos. O objetivo do presente trabalho é investigar a conformidade técnica e legal de sistemas de gerenciamento de resíduos de construção civil no município de Curitiba. Para tal, elaborou-se uma lista de verificação baseada nas normas em vigor e em alguns modelos de certificações ambientais, como: LEED, AQUA, CASBEE, BREAM e HQE. 24 obras de edifícios residenciais e comerciais foram visitadas — com ou sem certificação ambiental. Essa lista de verificação foi aplicada nas construções, para realizar um diagnóstico do setor. Apesar da gestão de resíduos ser obrigatória e restritiva à obtenção dos certificados de conclusão de obra, os resultados da pesquisa demonstraram que há problemas na segregação, acondicionamento e transporte dos resíduos. Entretanto, a fal...
The estimation of the composition and generation of municipal solid waste is important for the pl... more The estimation of the composition and generation of municipal solid waste is important for the planning of their management, considering the tendency of change in the characteristics of solid waste to the economic, social and cultural development of the people. Several factors can affect the composition rates and generation of municipal solid waste, such as economic, social, cultural and even geographical. There are many methods to estimate the composition and generation of municipal solid waste, such as simple manual sample separation and characterization and modern mathematical modeling, using software and statistical analyzes. The existence of several studies in this area in different countries is noted. From analysis, it’s possible to create parameters based on
In Brazil, the disposal of construction and demolition waste (CDW) quite often occurs in inadequa... more In Brazil, the disposal of construction and demolition waste (CDW) quite often occurs in inadequate places, resulting in social, economic, and environmental problems. This reflects the need for selecting appropriate areas for the disposal of this type of waste. These areas must follow local standards and regulations to protect human health and the environment. Considering that, this study is intended to indicate potentially suitable areas for CDW landfill deployment, known as Class A landfill in Brazil, supported by a GIS-MCDA based model. The GIS-MCDA technique, used as a basic tool to identify potentially suitable areas, has several advantages, such as low cost, reduced spatial data subjectivity, and fast decision-making process. The place chosen for this study is the Urban Central Core of the Metropolitan Area of Curitiba. By integrating GIS with MCDA techniques in this research study, it was possible to indicate potentially suitable areas for CDW disposal in this region.
Revista Brasileira de Gestão Ambiental e Sustentabilidade, 2020
Quatorze bibliotecas universitárias foram investigadas, especificamente em suas áreas de acervo e... more Quatorze bibliotecas universitárias foram investigadas, especificamente em suas áreas de acervo e de leitura. Foram realizadas leituras de iluminância destes ambientes quanto à iluminação artificial, tendo sido avaliados através dos Requisitos Técnicos da Qualidade do Nível de Eficiência Energética para Edifícios Comerciais, de Serviços e Públicos (RQT-C), e conforme a norma brasileira de iluminação de interiores NBR ISO/CIE 8995-1. Foram criadas maquetes eletrônicas das edificações visando a simular contribuição de luz natural e a analisar entrada de ganhos diretos de radiação solar no interior das bibliotecas. Adicionalmente, dados de radiação solar incidente foram contrastados com o desconforto causado pelo ofuscamento da visão de usuários. Os resultados mostraram que os sistemas de iluminação apresentaram pequenos desvios a serem corrigidos, oportunizando soluções de retrofit. As análises demonstraram que os sistemas de iluminação das bibliotecas estudadas possuem baixo desempen...
Revista Brasileira de Gestão Ambiental e Sustentabilidade, 2020
Os padrões atuais de gestão ambiental de rodovias impõem o compromisso do adequado destino e util... more Os padrões atuais de gestão ambiental de rodovias impõem o compromisso do adequado destino e utilização dos materiais de construção e resíduos. Os materiais de fresagem de pavimentos asfálticos vem sendo incorporados na confecção de novos pavimentos. Ocorre que o material fresado muitas vezes é estocado sob a forma de pilhas diretamente sobre o solo visando à utilização futura ou ainda simplesmente aterrados. O presente estudo buscou verificar o potencial efeito ecotoxicológico de águas que entram em contato com este tipo de material. Foram testados cinco tipos de amostras, em ensaios de lixiviação por diferentes métodos, cujos líquidos foram postos em contato com o microcrustáceo Daphnia magna, a fim de avaliar a toxicidade aquática aguda, verificando-se sua imobilidade. As amostras foram caracterizadas quanto à sua distribuição granulométrica, massa unitária e teor de betume. Coletaram-se amostras em intervalos de tempo de 30, 60, 90 e 120 min de lixiviação, em regime de recircula...
RESUMO A adsorção tem sido estudada como alternativa para tratamento de efluentes têxteis contend... more RESUMO A adsorção tem sido estudada como alternativa para tratamento de efluentes têxteis contendo corantes tóxicos, carcinogênicos, mutagênicos e que interferem no equilíbrio dos ecossistemas aquáticos ao serem lançados no ambiente sem adequado tratamento prévio. Este problema é agravado pois até 50% da quantidade de corante aplicado nas etapas de tingimento e de lavagem não se fixa às fibras dos tecidos. O objetivo deste estudo foi avaliar a remoção de cor de uma solução aquosa contendo o corante direct blue, na concentração inicial de 5 g/L, através da adsorção em cerâmica vermelha. Para isto, foram selecionadas as faixas de diâmetro de 1,21 mm a 2,4 mm e de 2,41 mm a 4,8 mm e as massas de 200, 250 e 300 g do adsorvente para cada faixa. Os ensaios foram conduzidos sob agitação constante de 120 rpm a temperatura ambiente, com duração total de 5 horas, para avaliar o desempenho da adsorção a partir dos valores obtidos para remoção de cor. Além disto, os resultados foram ajustados a...
RESUMO O objetivo deste artigo foi avaliar as propriedades do concreto com adição de diferentes t... more RESUMO O objetivo deste artigo foi avaliar as propriedades do concreto com adição de diferentes teores de lodo de Estação de Tratamento de Água (ETA), de modo a diminuir este passivo ambiental gerado pelas empresas de saneamento. No presente estudo, foram confeccionados corpos de prova de concreto com teores de 5% e 10% de lodo de ETA em substituição à areia. O lodo utilizado na fabricação do concreto foi proveniente de uma ETA, responsável pelo tratamento de água de parte de Curitiba, na qual é utilizado sulfato de alumínio como coagulante. Primeiramente foi feita caracterização físico-química do lodo coletado com determinação de pH, temperatura, turbidez, DQO, ST, teor de umidade e massa específica. Em seguida, foram moldados corpos de prova com dimensões de (10x20) cm e com os respectivos teores de lodo a serem incorporados e avaliadas as propriedades no estado endurecido do concreto: resistência à compressão, resistência à tração por compressão axial e absorção de água. Consider...
Resumo Este estudo tem por objetivo verificar a possibilidade de aproveitamento da água da chuva ... more Resumo Este estudo tem por objetivo verificar a possibilidade de aproveitamento da água da chuva em uma indústria metalmecânica localizada no município de São José dos Pinhais, região metropolitana de Curitiba, considerando o volume de chuvas, necessidade da indústria, as características de qualidade da água de chuva da região, além de uma simulação da cobrança pelo uso da água e emissão dos seus efluentes lançados em um córrego próximo. Nesta avaliação, verificou-se que o aproveitamento da água de chuva pode ser viável devido ao comportamento hidrológico da região e a qualidade dessa água, verificada por ensaios de laboratório. Além disso, realizou-se uma simulação para estimar a provável economia ao se evitar o pagamento pela captação e emissão dos lançamentos nos corpos d’água da região, além do orçamento do reservatório proposto para o armazenamento da água de chuva.
The Polycyclic Aromatic Hydrocarbons (PAHs) are organic pollutants of environmental persistence a... more The Polycyclic Aromatic Hydrocarbons (PAHs) are organic pollutants of environmental persistence and are considered potentially dangerous for its effects to be related to cancer development. The United States Environmental Protection Agency (USEPA) monitors 16 of these components, classifying them as priority pollutants. This work was developed in order to analyze the presence of 16 kinds of PAHs in asphalt waste samples taken in the cities of Curitiba and Paranaguá (Brazil). For this, two solid liquid extraction methods have been adapted: by mechanical agitation and percolation column. Both methods used an extractor liquid of hidroalcoholic (20% v/v). The analyses of the extracts were made by gas chromatography (CG-FID). PAHs were detected in both analyzed asphalt waste samples, which is an alert to the risks of improper disposal in soil of this type of material.
Revista Brasileira de Ciências Ambientais (Online), 2012
Neste trabalho buscou-se estabelecer um procedimento a ser utilizado por parte dos auditores que ... more Neste trabalho buscou-se estabelecer um procedimento a ser utilizado por parte dos auditores que realizam Auditoria Ambiental Compulsória, para que realizem também auditoria de Segurança Ocupacional dentro do contexto da gestão ambiental. Para se alcançar este objetivo, listas de verificação pautadas nas Normas Regulamentadoras do Ministério do Trabalho foram elaboradas, além da adoção de indicadores de sustentabilidade. Esta ferramenta permite fornecer aos auditores, instrumentos práticos para a realização do procedimento de Auditoria Ambiental Compulsória, principalmente para aqueles que não possuem familiaridade com as legislações correlatas, pois podem utilizar esta ferramenta como um auxílio na avaliação das atividades que causam perigos e danos ao trabalhador, considerando as atividades potencialmente poluidoras realizadas nos empreendimentos. O método utilizado neste trabalho consistiu na elaboração de listas de verificação que foram utilizadas como referência no procedimento...
Civil construction activities in large infrastructure works are used to present high probability ... more Civil construction activities in large infrastructure works are used to present high probability to cause labor accidents. This paper aims to analyze the safety hazards associated with workmanship of gabions. Using the Preliminary Hazard Analysis technique (PHA), a form based in the Failure Mode and Effects Analysis (FMEA) technique was developed. The PHA technique was applied in a field research in order to identify work safety hazards. The FMEA form developed was adapted for future implementation, prioritizing reducing the risk of accidents and the performance of the security sector through preventive actions in order to minimize the impact of potential accidents. The identification and further prevention of safety is simple by using the PHA technique. After the adequacy of the methodology of FMEA risk assessment, it was concluded that the proposed tool helps identify hazards and allows a general diagnosis and consistent with the current hazards of the company.
Due to the growth in demand for construction works in Brazil, there has been an increase in waste... more Due to the growth in demand for construction works in Brazil, there has been an increase in waste generation. In order to investigate if the contamination of wood waste in construction sites could represent an environmental risk, field surveys observing qualitative and quantitative aspects were conducted. Analysis of wood waste from six construction sites in the city of Curitiba, Brazil, allowed for the infer that the most frequently found contaminants were mortar and metal pins at 59%, and that 64% of the samples were contaminated with more than two contaminants. As disposal solution, all the studied cases use potteries to discard its wood wastes. A worrying result is that 18% of samples were contaminated by a release agent-ink or varnish. These samples possibly could have been burned in potteries without an effective air pollution control. Another conclusion of the survey is that the waste management in the construction site is usually promoted by a layperson.
The construction industry, more specifically the heavy construction subsector, contributes to the... more The construction industry, more specifically the heavy construction subsector, contributes to the socioeconomic development of the population. On the other hand, it causes negative impacts on the consumption of natural resources and produces the large quantity of waste, including Personal Protective Equipment (PPE) which not more may be used. The overall intention of this work is to investigate the current situation of the management and disposal of Personal Protective Equipment in heavy construction works. The research method consisted in identifying and listing functions typical of heavy construction work and their protective equipment, classification of the PPEs used in the heavy construction subsector, and destination of this equipment when no longer used, in three different studies in Brazil. The studies showed that the law is followed and PPEs are designed according to the law. It was found that the final destination used by most builders were landfills. As for the recycling o...
The sustainability analysis must not be restricted on evaluating the carbon emissions to the atmo... more The sustainability analysis must not be restricted on evaluating the carbon emissions to the atmosphere. To achieve an acceptable way of sustainable development on construction or demolition works, the engineers must incorporate other practices including the waste management. This research intends to investigate the sustainability of the Brazilian construction and demolition waste management system whose first law in 2012 completed ten years. It was analyzed 38 engineering works through residential and commercial endeavors. It was investigated administrative and executive routines, difficulties during the endeavor licensing to the municipality, and operational questions. The chosen works are located in Curitiba, Parana, Brazil and have from 6.000m² to 100.000m² of constructed area. The results show that Brazilian experience has a lot of good points including the systematization of procedures, the identification of responsibilities, the sharing of tasks and the establishing of punish...
Despite the significant representation of construction industry in Brazilian economy, the waste g... more Despite the significant representation of construction industry in Brazilian economy, the waste generated by the sector represents one of the aspects that cause more damage to society and environment. This situation is a result of deficiency in the management of construction waste that leads to inadequate treatment and disposal of waste. According to researches, the volume of building waste represents approximately 67% of municipal solid waste generated in the country. In this context, reverse logistics has been seen as an alternative to proper management, when properly planned and executed. Since its obligation, by Law 12.305/2010, establishing the National Policy of Solid Waste (PNRS), reverse logistics has brought concerns to productive sector because of some difficulties inherent in the implementation of this system. In this context, this paper aims to examine the available literature on the subject and assess main barriers found for application of reverse logistics in construct...
Revista Brasileira de Gestão Ambiental e Sustentabilidade, 2021
Current building management standards demand that construction waste management occurs in the pla... more Current building management standards demand that construction waste management occurs in the planning phase. This paper presents the development of a plug-in as a BIM tool to predict waste generation. As a research strategy, the plug-in was applied to a single-family housing project, the respective construction wastes were predicted in the BIM technology and compared to the literature. Through waste generation indexes, some planning indicators were calculated. The identified wastes were automatically classified, and a management structure was designed. The study showed that the best results are obtained when the construction waste is estimated from Actual Built Volume instead of Apparent Constructed Volume like the traditional models uses. In conclusion, adopting a plug-in do predict construction waste has proved to be advantageous. A specific advantage of the proposed method is that the plug-in user may adopt their waste generation indexes according to the regional and the product...
Frontiers in Engineering and Built Environment, 2021
PurposeThe construction sector is increasingly engaged to explore the potential application of bu... more PurposeThe construction sector is increasingly engaged to explore the potential application of building information modelling (BIM) for the sustainability of the buildings. BIM can be applied conjugated to certification methods to evaluate the sustainability of the buildings, and it is known as building sustainability assessment (BSA). This article aims to explore applications of BIM in the sustainability analysis of buildings, including five types of BSA.Design/methodology/approachA literature review from 2009 to 2020 considering a combination of search terms related to BIM and BSA complemented the analysis. The bibliometric analysis indicates an increase in the number of publications on this topic of study in the last five years. A peak occurred in 2015 and 2020, with 51 and 66 publications, respectively.FindingsThe results showed that BIM contributes to achieving part of the sustainability requirements from BSA, especially quantitative requirements that are related to material an...
Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasi... more Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasil há mais de uma década. O intuito dessa gestão é amenizar os impactos ambientais decorrentes do gerenciamento indevido desses resíduos. O objetivo do presente trabalho é investigar a conformidade técnica e legal de sistemas de gerenciamento de resíduos de construção civil no município de Curitiba. Para tal, elaborou-se uma lista de verificação baseada nas normas em vigor e em alguns modelos de certificações ambientais, como: LEED, AQUA, CASBEE, BREAM e HQE. 24 obras de edifícios residenciais e comerciais foram visitadas — com ou sem certificação ambiental. Essa lista de verificação foi aplicada nas construções, para realizar um diagnóstico do setor. Apesar da gestão de resíduos ser obrigatória e restritiva à obtenção dos certificados de conclusão de obra, os resultados da pesquisa demonstraram que há problemas na segregação, acondicionamento e transporte dos resíduos. Entretanto, a fal...
The estimation of the composition and generation of municipal solid waste is important for the pl... more The estimation of the composition and generation of municipal solid waste is important for the planning of their management, considering the tendency of change in the characteristics of solid waste to the economic, social and cultural development of the people. Several factors can affect the composition rates and generation of municipal solid waste, such as economic, social, cultural and even geographical. There are many methods to estimate the composition and generation of municipal solid waste, such as simple manual sample separation and characterization and modern mathematical modeling, using software and statistical analyzes. The existence of several studies in this area in different countries is noted. From analysis, it’s possible to create parameters based on
In Brazil, the disposal of construction and demolition waste (CDW) quite often occurs in inadequa... more In Brazil, the disposal of construction and demolition waste (CDW) quite often occurs in inadequate places, resulting in social, economic, and environmental problems. This reflects the need for selecting appropriate areas for the disposal of this type of waste. These areas must follow local standards and regulations to protect human health and the environment. Considering that, this study is intended to indicate potentially suitable areas for CDW landfill deployment, known as Class A landfill in Brazil, supported by a GIS-MCDA based model. The GIS-MCDA technique, used as a basic tool to identify potentially suitable areas, has several advantages, such as low cost, reduced spatial data subjectivity, and fast decision-making process. The place chosen for this study is the Urban Central Core of the Metropolitan Area of Curitiba. By integrating GIS with MCDA techniques in this research study, it was possible to indicate potentially suitable areas for CDW disposal in this region.
Revista Brasileira de Gestão Ambiental e Sustentabilidade, 2020
Quatorze bibliotecas universitárias foram investigadas, especificamente em suas áreas de acervo e... more Quatorze bibliotecas universitárias foram investigadas, especificamente em suas áreas de acervo e de leitura. Foram realizadas leituras de iluminância destes ambientes quanto à iluminação artificial, tendo sido avaliados através dos Requisitos Técnicos da Qualidade do Nível de Eficiência Energética para Edifícios Comerciais, de Serviços e Públicos (RQT-C), e conforme a norma brasileira de iluminação de interiores NBR ISO/CIE 8995-1. Foram criadas maquetes eletrônicas das edificações visando a simular contribuição de luz natural e a analisar entrada de ganhos diretos de radiação solar no interior das bibliotecas. Adicionalmente, dados de radiação solar incidente foram contrastados com o desconforto causado pelo ofuscamento da visão de usuários. Os resultados mostraram que os sistemas de iluminação apresentaram pequenos desvios a serem corrigidos, oportunizando soluções de retrofit. As análises demonstraram que os sistemas de iluminação das bibliotecas estudadas possuem baixo desempen...
Revista Brasileira de Gestão Ambiental e Sustentabilidade, 2020
Os padrões atuais de gestão ambiental de rodovias impõem o compromisso do adequado destino e util... more Os padrões atuais de gestão ambiental de rodovias impõem o compromisso do adequado destino e utilização dos materiais de construção e resíduos. Os materiais de fresagem de pavimentos asfálticos vem sendo incorporados na confecção de novos pavimentos. Ocorre que o material fresado muitas vezes é estocado sob a forma de pilhas diretamente sobre o solo visando à utilização futura ou ainda simplesmente aterrados. O presente estudo buscou verificar o potencial efeito ecotoxicológico de águas que entram em contato com este tipo de material. Foram testados cinco tipos de amostras, em ensaios de lixiviação por diferentes métodos, cujos líquidos foram postos em contato com o microcrustáceo Daphnia magna, a fim de avaliar a toxicidade aquática aguda, verificando-se sua imobilidade. As amostras foram caracterizadas quanto à sua distribuição granulométrica, massa unitária e teor de betume. Coletaram-se amostras em intervalos de tempo de 30, 60, 90 e 120 min de lixiviação, em regime de recircula...
RESUMO A adsorção tem sido estudada como alternativa para tratamento de efluentes têxteis contend... more RESUMO A adsorção tem sido estudada como alternativa para tratamento de efluentes têxteis contendo corantes tóxicos, carcinogênicos, mutagênicos e que interferem no equilíbrio dos ecossistemas aquáticos ao serem lançados no ambiente sem adequado tratamento prévio. Este problema é agravado pois até 50% da quantidade de corante aplicado nas etapas de tingimento e de lavagem não se fixa às fibras dos tecidos. O objetivo deste estudo foi avaliar a remoção de cor de uma solução aquosa contendo o corante direct blue, na concentração inicial de 5 g/L, através da adsorção em cerâmica vermelha. Para isto, foram selecionadas as faixas de diâmetro de 1,21 mm a 2,4 mm e de 2,41 mm a 4,8 mm e as massas de 200, 250 e 300 g do adsorvente para cada faixa. Os ensaios foram conduzidos sob agitação constante de 120 rpm a temperatura ambiente, com duração total de 5 horas, para avaliar o desempenho da adsorção a partir dos valores obtidos para remoção de cor. Além disto, os resultados foram ajustados a...
RESUMO O objetivo deste artigo foi avaliar as propriedades do concreto com adição de diferentes t... more RESUMO O objetivo deste artigo foi avaliar as propriedades do concreto com adição de diferentes teores de lodo de Estação de Tratamento de Água (ETA), de modo a diminuir este passivo ambiental gerado pelas empresas de saneamento. No presente estudo, foram confeccionados corpos de prova de concreto com teores de 5% e 10% de lodo de ETA em substituição à areia. O lodo utilizado na fabricação do concreto foi proveniente de uma ETA, responsável pelo tratamento de água de parte de Curitiba, na qual é utilizado sulfato de alumínio como coagulante. Primeiramente foi feita caracterização físico-química do lodo coletado com determinação de pH, temperatura, turbidez, DQO, ST, teor de umidade e massa específica. Em seguida, foram moldados corpos de prova com dimensões de (10x20) cm e com os respectivos teores de lodo a serem incorporados e avaliadas as propriedades no estado endurecido do concreto: resistência à compressão, resistência à tração por compressão axial e absorção de água. Consider...
Resumo Este estudo tem por objetivo verificar a possibilidade de aproveitamento da água da chuva ... more Resumo Este estudo tem por objetivo verificar a possibilidade de aproveitamento da água da chuva em uma indústria metalmecânica localizada no município de São José dos Pinhais, região metropolitana de Curitiba, considerando o volume de chuvas, necessidade da indústria, as características de qualidade da água de chuva da região, além de uma simulação da cobrança pelo uso da água e emissão dos seus efluentes lançados em um córrego próximo. Nesta avaliação, verificou-se que o aproveitamento da água de chuva pode ser viável devido ao comportamento hidrológico da região e a qualidade dessa água, verificada por ensaios de laboratório. Além disso, realizou-se uma simulação para estimar a provável economia ao se evitar o pagamento pela captação e emissão dos lançamentos nos corpos d’água da região, além do orçamento do reservatório proposto para o armazenamento da água de chuva.
The Polycyclic Aromatic Hydrocarbons (PAHs) are organic pollutants of environmental persistence a... more The Polycyclic Aromatic Hydrocarbons (PAHs) are organic pollutants of environmental persistence and are considered potentially dangerous for its effects to be related to cancer development. The United States Environmental Protection Agency (USEPA) monitors 16 of these components, classifying them as priority pollutants. This work was developed in order to analyze the presence of 16 kinds of PAHs in asphalt waste samples taken in the cities of Curitiba and Paranaguá (Brazil). For this, two solid liquid extraction methods have been adapted: by mechanical agitation and percolation column. Both methods used an extractor liquid of hidroalcoholic (20% v/v). The analyses of the extracts were made by gas chromatography (CG-FID). PAHs were detected in both analyzed asphalt waste samples, which is an alert to the risks of improper disposal in soil of this type of material.
Uploads
Papers by André Nagalli