Chicken-Developer HDDブート環境のバックアップ

HDDブート環境のバックアップ

ブート

Orion1 CPU = Low

=== KURO U-Boot. ===
LOADER
KUROBOX BOARD: KURO_BOX LE (CFG_ENV_ADDR=fffff000)

U-Boot 1.1.1 (Feb 13 2007 - 15:59:43) Marvell version: 1.12.1 - TINY

DRAM CS[0] base 0x00000000 size 128MB
DRAM Total size 128MB
[256kB@fffc0000] Flash: 256 kB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
NAND: 256 MB

Soc: 88F5182 A2
CPU: ARM926 (Rev 0) running @ 500Mhz
Orion 1 streaming disabled
SysClock = 250Mhz , TClock = 166Mhz

USB 0: host mode
USB 1: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Net: egiga0 [PRIME]
Using 88E1118 phy
hit any key to switch tftp boot.
Hit any key to stop autoboot: 0
<<system_bootend>>
Hit any key to stop autoboot: 3
Marvell>>

NANDブートへの変更

setenv bootargs_root root=/dev/mtdblock2 rw panic=5
setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver)
setenv bootcmd 'nboot $(default_kernel_addr) 0 $(nand_uImage_offset) ;setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver); bootm $(default_kernel_addr)'
setenv nand_boot yes
boot

内蔵HDDにHDDブート環境をバックアップ

mount /dev/sda2 /mnt/rootfs
cd /mnt/rootfs
tar zcvf /mnt/disk1/hddrootfs.tar.gz .

シリアルコンソール UP12C USB PDC Converter