Anzac Bridge

The Anzac Bridge is an 8-lane cable-stayed bridge spanning Johnstons Bay between Pyrmont and Glebe Island (part of the suburb of Rozelle), close to the central business district of Sydney, Australia. The bridge forms part of the Western Distributor leading from the Sydney CBD and Cross City Tunnel to the suburbs of the Inner West and Northern Sydney.

History

Glebe Island Bridge

There were two bridges over Johnstons Bay before the construction of the Anzac Bridge.

The first bridge was constructed as part of a project to move the abattoirs out of central Sydney, and to construct public abattoirs at Glebe Island. The first pile of the original bridge was driven in October 1860. The bridge was opened in 1862 and was a timber beam bridge 318.6 metres (1,045 feet 5 inches) long and 8.5 m (28 ft) wide with a 12 m (40 ft) swing section on the eastern side. It replaced a double steam punt crossing.

The second Glebe Island Bridge was an electrically operated swing bridge opened in 1903, the year after the opening of the new Pyrmont Bridge over Sydney's Darling Harbour, which has a similar design. The bridge was designed by Percy Allan of the New South Wales Public Works Department who also designed the Pyrmont Bridge. Delays due to increasing traffic, which were exacerbated by having to close a major arterial road to allow the movement of shipping into Blackwattle Bay, led to the construction of the present-day Anzac Bridge. The 1903 bridge is still standing, but there is no access to pedestrians or vehicular traffic.