Marie Juvy Glen M. Fegarido BSHM F&B-4 TQM TTH 11:30-1:00PM
This is a list of current, published] International Organization for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.
ISO 1 – ISO 99[edit]
ISO 1:2002 Geometrical Product Specifications (GPS) – Standard reference temperature for geometrical product specification and verification
ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
ISO 3:1973 Preferred numbers – Series of preferred numbers
ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
ISO 5 Photography and graphic technology – Density measurements
ISO 5-1:2009 Geometry and functional notation
ISO 5-2:2009 Geometric conditions for transmittance density
ISO 5-3:2009 Spectral conditions
ISO 5-4:2009 Geometric conditions for reflection density
ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
ISO 7 Pipe threads where pressure-tight joints are made on the threads
ISO 7-1:1994 Dimensions, tolerances and designation
ISO 7-2:2000 Verification by means of limit gauges
ISO 8:1977 Documentation – Presentation of periodicals
ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
ISO 12:1987 Aerospace – Pipelines – Identification
ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
ISO 15:2011 Radial bearings -- Boundary dimensions, general plan
ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
ISO 18:1981 Documentation – Contents list of periodicals
ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
ISO 23:1993 Cinematography -- Camera usage of 35 mm motion-picture film -- Specifications
ISO 25:1994 Cinematography -- Camera usage of 16 mm motion-picture film -- Specifications
ISO 26:1993 Cinematography -- Projector usage of 16 mm motion-picture films for direct front projection -- Specifications
ISO 28:1976 Cinematography -- Camera usage of 8 mm Type R motion-picture film -- Specifications
ISO 29:1980 Cinematography -- Projector usage of 8 mm Type R silent motion-picture film for direct front projection -- Specifications [Withdrawn without replacement]
ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content
ISO 34
ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces
ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability
ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics
ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 41:1980 Shipbuilding -- Inland vessels -- Covers for deck openings for pumps [withdrawn without replacement]
ISO 43:1976 Aircraft -- Jacking pads
ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation
ISO 45:1990 Aircraft -- Pressure refuelling connections
ISO 46:1973 Aircraft -- Fuel nozzle grounding plugs and sockets
ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
ISO 50:1977 Metal pipes -- Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering -- Modules
ISO 55:1977 Seedlac -- Specification [Withdrawn without replacement]
ISO 57:1975 Bleached lac -- Specification [Withdrawn without replacement]
ISO 60:1977 Plastics -- Determination of apparent density of material that can be poured from a specified funnel
ISO 61:1976 Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel
ISO 62:2008 Plastics -- Determination of water absorption
ISO 63:1975 Flat transmission belts -- Lengths [Withdrawn: Replaced with ISO 22]
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
ISO 67:1981 Muscovite mica blocks, thins and films -- Grading by size [Withdrawn without replacement]
ISO 68 ISO general-purpose screw threads – Basic profile
ISO 68-1:1998 Metric screw threads
ISO 68-2:1998 Inch screw threads
ISO 69:1998 Cinematography -- 16 mm motion-picture and magnetic film -- Cutting and perforating dimensions
ISO 70:1981 Cinematography -- 35 mm negative photographic sound record on 35 mm motion-picture film -- Position and maximum width dimensions
ISO 71:1977 Cinematography -- 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film -- Positions and dimensions
ISO 74:1976 Cinematography -- Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film -- Positions and dimensions
ISO 75 Plastics -- Determination of temperature of deflection under load
ISO 75-1:2013 Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
ISO 75-2:2013 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
ISO 75-3:2004 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 76:2006 Rolling bearings -- Static load ratings
ISO 78 Chemistry — Layouts for standards
ISO 78-2:1999 Chemistry -- Layouts for standards -- Part 2: Methods of chemical analysis
ISO 78-3:1983 Chemistry -- Layouts for standards -- Part 3: Standard for molecular absorption spectrometry
ISO 78-4:1983 Layouts for standards -- Part 4: Standard for atomic absorption spectrometric analysis
ISO 82:1974 Steel -- Tensile testing [Withdrawn: replaced with ISO 6892-1]
ISO 83:1976 Steel -- Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
ISO 86:1974 Steel -- Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
ISO 89:1974 Steel -- Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
ISO 90 Light gauge metal containers -- Definitions and determination of dimensions and capacities
ISO 90-1:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-top cans
ISO 90-2:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: General use containers
ISO 90-3:2000 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans
ISO 91 Petroleum measurement tables
ISO 91-1:1992 Petroleum measurement tables -- Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
ISO 91-2:1991 Petroleum measurement tables -- Part 2: Tables based on a reference temperature of 20 degrees C
ISO 92:1976 Textile machinery and accessories -- Spinning machinery -- Definition of side (left or right)
ISO 93 Textile machinery and accessories -- Cylindrical sliver cans
ISO 93-1:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 1: Main dimensions
ISO 93-2:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2: Spring bottoms
ISO 94:1982 Textile machinery and accessories -- Spindle gauges for ring-spinning and ring-doubling frames
ISO 96 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames
ISO 96-1:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 1: Flange rings T and SF and their travellers
ISO 96-2:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 2: HZ- and J-rings and their travellers
ISO 97:1975 Textile machinery and accessories -- Rings for spinning, doubling and twisting for ear-shaped travellers
ISO 98:2001 Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main dimensions of coverings for top rollers
ISO 100 – ISO 199[edit]
ISO 100:1984 Pulleys for flat transmission belts -- Crowns [Withdrawn: replaced with ISO 22]
ISO 102:1990 Aircraft -- Gravity filling orifices
ISO 104:2002 Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan
ISO 105 Textiles — Tests for colour fastness
ISO 105-A01:2010 Part A01: General principles of testing
ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
ISO 105-A03:1993 Part A03: Grey scale for assessing staining
ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight
ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
ISO 105-B10:2011 Part B10: Artificial weathering -- Exposure to filtered xenon-arc radiation
ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering -- Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents
ISO 105-E01:2013 Part E01: Colour fastness to water
ISO 105-E02:2013 Part E02: Colour fastness to sea water
ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 105-E04:2013 Part E04: Colour fastness to perspiration
ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
ISO 105-E08:1994 Part E08: Colour fastness to hot water
ISO 105-E09:2010 Part E09: Colour fastness to potting
ISO 105-E10:1994 Part E10: Colour fastness to decatizing
ISO 105-E11:1994 Part E11: Colour fastness to steaming
ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides
ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
ISO 105-J03:2009 Part J03: Calculation of colour differences
ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
ISO 105-N05:1993 Part N05: Colour fastness to stoving
ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
ISO 105-X08:1994 Part X08: Colour fastness to degumming
ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
ISO 105-X12:2001 Part X12: Colour fastness to rubbing
ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
ISO 105-X16:2001 Part X16: Colour fastness to rubbing -- Small areas
ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
ISO 108:1976 Textile machinery and accessories -- Weaving looms -- Definition of left and right sides
ISO 109:1982 Textile machinery -- Working widths of weaving machines
ISO 110:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
ISO 111:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
ISO 112:1983 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
ISO 113:2010 Rolling bearings -- Plummer block housings -- Boundary dimensions
ISO 114:1980 99.8 Unalloyed magnesium ingots -- Chemical composition [Withdrawn: Replaced by ISO 8287]
ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and composition
ISO 119:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method
ISO 120:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method
ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings -- Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
ISO 123:2001 Rubber latex -- Sampling
ISO 124:2011 Latex, rubber -- Determination of total solids content
ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity
ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content
ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number
ISO 128
ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and index
ISO 128-15:2013 Technical product documentation (TPD) -- General principles of presentation -- Part 15: Presentation of shipbuilding drawings
ISO 128-20:1996 Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines
ISO 128-21:1997 Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems
ISO 128-22:1999 Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines
ISO 128-23:1999 Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings
ISO 128-24:1999 Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings
ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings
ISO 128-30:2001 Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views
ISO 128-34:2001 Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings
ISO 128-40:2001 Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections
ISO 128-44:2001 Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings
ISO 128-50:2001 Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections
ISO/TS 128-71:2010 Technical product documentation (TPD) -- General principles of presentation -- Part 71: Simplified representation for mechanical engineering drawings
ISO 129
ISO 129-1:2004 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles
ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
ISO 131:1979 Acoustics -- Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
ISO 132:2011 Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia)
ISO 133:1983 Rubber, vulcanized -- Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
ISO 136:1972 Steel -- Simple torsion testing of wire [Withdrawn replaced by ISO 7800]
ISO 137:1975 Wool -- Determination of fibre diameter -- Projection microscope method
ISO 139:2005 Textiles -- Standard atmospheres for conditioning and testing
ISO 140 Acoustics -- Measurement of sound insulation in buildings and of building elements
ISO 140-2:1991 Part 2: Determination, verification and application of precision data
ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms
ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades
ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors
ISO 140-14:2004 Part 14: Guidelines for special situations in the field
ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements
ISO 141:1976 Textile machinery and accessories -- Pirn winders and cross winders -- Definition of left and right sides
ISO 142:1976 Textile machinery and accessories -- Weaving preparatory machines -- Definition of left and right sides
ISO 143:1977 Textile machinery and accessories -- Weft pirns for automatic looms [Withdrawn without replacement]
ISO 144:1973 Steel -- Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
ISO 146:1984 Metallic materials -- Hardness test -- Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
ISO 146-2:1993 Metallic materials -- Verification of Vickers hardness testing machines -- Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
ISO 148 Metallic materials -- Charpy pendulum impact test
ISO 148-1:2009 Part 1: Test method
ISO 148-2:2008 Part 2: Verification of testing machines
ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test
ISO 155:1998 Belt drives -- Pulleys -- Limiting values for adjustment of centres
ISO 156:1982 Metallic materials -- Hardness test -- Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]
ISO 157:1996 Coal -- Determination of forms of sulfur
ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
ISO 161 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures
ISO 161-1:1996 Part 1: Metric series
ISO 161-2:1996 Part 2: Inch-based series
ISO 162:1985 Cinematography -- Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture -- Positions and width dimensions
ISO 171:1980 Plastics -- Determination of bulk factor of moulding materials
ISO 172:1978 Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia
ISO 174:1974 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]
ISO 200 – ISO 999[edit]
ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction
ISO 226:2003 Acoustics – Normal equal-loudness-level contours
ISO 228 Pipe threads where pressure-tight joints are not made on the threads
ISO 228-1:2000 Dimensions, tolerances and designation
ISO 228-2:1987 Verification by means of limit gauges
ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters[Note 3]
ISO 233-2:1993 Arabic language – Simplified transliteration
ISO 233-3:1999 Persian language – Simplified transliteration
ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters[Note 3]
ISO 259-2:1994 Simplified transliteration
ISO 261 ISO general purpose metric screw threads – General plan
ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
ISO 286-1 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 1: Basis of tolerances, deviations and fits
ISO 286-2 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 361 Basic ionizing radiation symbol
ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
ISO 639 Codes for the representation of names of languages
ISO 639-1 Alpha-2 code
ISO 639-2 Alpha-3 code
ISO 639-3 Alpha-3 code for comprehensive coverage of languages
ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
ISO 639-5 Alpha-3 code for language families and groups
ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
ISO/IEC 646 Information technology – ISO 7-bit coded character set for information interchange
ISO 657 Hot-rolled steel sections
ISO 668 Series 1 freight containers – Classification, dimensions and ratings
ISO 690 Information and documentation – Guidelines for bibliographic references and citations to information resources
ISO 704 Terminology work – Principles and methods
ISO 732 Photography – 120-size and 220-size films – Dimensions
ISO 764 Horology – Magnetic resistant watches
ISO 760:1978 Determination of water - Karl Fischer method (General method)
ISO 787 General methods of test for pigments and extenders
ISO 787-9:1981 Determination of pH value of an aqueous suspension
ISO 838 Paper – Holes for general filing purposes – Specifications
ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters
ISO 860 Terminology work – Harmonization of concepts and terms
ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
ISO 898-1 Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread
ISO 898-2 Nuts with specified proof load values – Coarse thread
ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
ISO 898-6 Nuts with specified proof load values – Fine pitch thread
ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
ISO 965 ISO general purpose metric screw threads – Tolerances
ISO 965-1 Principles and basic data
ISO 965-2 Limits of sizes for general purpose external and internal screw threads – Medium quality
ISO 965-3 Deviations for constructional screw threads
ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO 999 Information and documentation – Guidelines for the content, organization, and presentation of indexes
ISO 1000 – ISO 4999[edit]
ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
ISO 1007 Photography – 135-size film and magazine – Specifications
ISO 1101 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
ISO 1222 Photography – Tripod connections
ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO/IEC 1539 Information technology – Programming languages – Fortran
ISO 1629 Rubber and latices – Nomenclature
ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties
ISO 1745 Information processing – Basic mode control procedures for data communication systems
ISO 1750 Pesticides and other agrochemicals – Common names
ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
ISO/IEC 2022 Information technology – Character code structure and extension techniques
ISO 2108 Information and documentation – International standard book number (ISBN)
ISO 2145 Documentation – Numbering of divisions and subdivisions in written documents
ISO 2162 Technical product documentation – Springs
ISO 2162-1 Simplified representation
ISO 2162-2 Presentation of data for cylindrical helical compression springs
ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
ISO 2533 Standard Atmosphere
ISO 2692 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 2709 Information and documentation – Format for information exchange
ISO 2768 General tolerances
ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
ISO 2852 Stainless steel clamp pipe couplings for the food industry
ISO 3002 Basic quantities in cutting and grinding
ISO 3082 Iron ores – Sampling and sample preparation procedures
ISO 3098 Technical product documentation – Lettering
ISO 3103 Tea – Preparation of liquor for use in sensory tests
ISO 3166 Codes for the representation of names of countries and their subdivisions
ISO 3166-1 Country codes
ISO 3166-2 Country subdivision code
ISO 3166-3 Code for formerly used names of countries
ISO 3297 Information and documentation – International standard serial number (ISSN)
ISO 3394 Dimensions of rigid rectangular packages – Transport packages
ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
ISO 3534 Statistics – Vocabulary and symbols
ISO 3534-1 General statistical terms and terms used in probability
ISO 3534-2 Applied statistics
ISO 3534-3 Design of experiments
ISO 3534-4 Survey sampling
ISO 3536 Road vehicles – Safety glazing materials – Vocabulary
ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
ISO 3601 Fluid power systems – O-rings
ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
ISO 3601-2 Housing dimensions for general applications
ISO 3601-3 Quality acceptance criteria
ISO 3601-4 Anti-extrusion rings (back-up rings)
ISO 3601-5 Suitability of elastomeric materials for industrial applications
ISO 3602 Documentation – Romanization of Japanese (kana script)
ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 3]
ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
ISO 3676 Packaging – Unit load sizes – Dimensions
ISO 3864 Graphical symbols – Safety colours and safety signs
ISO 3901 Information and documentation – International Standard Recording Code (ISRC)
ISO 3977 Gas turbines – Procurement
ISO 4074 Natural latex rubber condoms – Requirements and test methods
ISO 4157 Construction drawings – Designation systems
ISO 4157-1 Buildings and part of buildings
ISO 4157-2 Room names and numbers
ISO 4157-3 Room identifiers
ISO 4165 Road vehicles — Electrical connections — Double-pole connection
ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
ISO 4217 Codes for the representation of currencies and funds
ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
ISO 4628-1 General introduction and designation system
ISO 4628-2 Assessment of degree of blistering
ISO 4628-3 Assessment of degree of rusting
ISO 4628-4 Assessment of degree of cracking
ISO 4628-5 Assessment of degree of flaking
ISO 4628-6 Assessment of degree of chalking by tape method
ISO 4628-7 Assessment of degree of chalking by velvet method
ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
ISO 4628-10 Assessment of degree of filiform corrosion
ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
ISO 4892 Plastics – Methods of exposure to laboratory light sources
ISO 5000 – ISO 9999[edit]
ISO 5127 Information and documentation – Vocabulary
ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
ISO 5167-1 General principles and requirements
ISO 5167-2 Orifice plates
ISO 5167-3 Nozzles and Venturi nozzles
ISO 5167-4 Venturi tubes
ISO/IEC 5218 Information technology – Codes for the representation of human sexes
ISO 5455 Technical drawings – Scales
ISO 5457 Technical product documentation – Sizes and layout of drawing sheets
ISO 5458 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing
ISO 5459 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems
ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
ISO 5660-1 Heat release rate (cone calorimeter method)
ISO 5660-2 Smoke production rate (dynamic measurement)
ISO/TS 5660-3 Guidance on measurement
ISO 5725 Accuracy (trueness and precision) of measurement methods and results
ISO 5775 Bicycle tires and rims
ISO 5776 Graphic technology - Symbols for text correction
ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
ISO 5971:1981 Size designation of clothes – Pantyhose
ISO 5993 Sodium hydroxide for industrial use -- Determination of mercury content -- Flameless atomic absorption spectrometric method
ISO 6107-4:1993 Water quality -- Vocabulary
ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
ISO 6194-5 Identification of visual imperfections
ISO 6336 Calculation of load capacity of spur and helical gears
ISO 6344 Coated abrasives – Grain size analysis
ISO 6344-1 Grain size distribution test
ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220
ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500
ISO 6357 Documentation – Spine titles on books and other publications
ISO/IEC 6429 Information technology – Control functions for coded character sets
ISO 6438 Documentation – African coded character set for bibliographic information interchange
ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
ISO 6594 Cast iron drainage pipes and fittings – Spigot series
ISO 6709 Standard representation of geographic point location by coordinates
ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
ISO 7001 Graphical symbols – Public information symbols
ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
ISO 7098 Information and documentation – Romanization of Chinese
ISO 7200 Technical product documentation – Data fields in title blocks and document headers
ISO 7240 Fire detection and alarm systems
ISO 7372 Trade data interchange
ISO/IEC 7498 Information technology -- Open Systems Interconnection -- Basic Reference Model[Note 3]
ISO/IEC 7498-1 The Basic Model
ISO 7498-2 Security Architecture
ISO/IEC 7498-3 Naming and addressing
ISO/IEC 7498-4 Management framework
ISO/IEC 7501 Identification cards – Machine readable travel documents
ISO/IEC 7501-1:2008 Machine readable passport
ISO/IEC 7501-2:1997 Machine readable visa
ISO/IEC 7501-3:2005 Machine readable official travel documents
ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
ISO/IEC 7810 Identification cards – Physical characteristics
ISO/IEC 7811 Identification cards – Recording technique
ISO/IEC 7812 Identification cards – Identification of issuers
ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]
ISO/IEC 7816-1 Cards with contacts — Physical characteristics
ISO/IEC 7816-2 Cards with contacts — Dimensions and location of the contacts
ISO/IEC 7816-3 Cards with contacts — Electrical interface and transmission protocols
ISO/IEC 7816-4 Organization, security and commands for interchange
ISO/IEC 7816-5 Registration of application providers
ISO/IEC 7816-6 Interindustry data elements for interchange
ISO/IEC 7816-7 Interindustry commands for Structured Card Query Language (SCQL)
ISO/IEC 7816-8 Commands for security operations
ISO/IEC 7816-9 Commands for card management
ISO/IEC 7816-10 Electronic signals and answer to reset for synchronous cards
ISO/IEC 7816-11 Personal verification through biometric methods
ISO/IEC 7816-12 Cards with contacts — USB electrical interface and operating procedures
ISO/IEC 7816-13 Commands for application management in multi-application environment
ISO/IEC 7816-15 Cryptographic information application
ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
ISO 8000 Data quality
ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
ISO 8090 Cycles – Terminology
ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
ISO 8373 Manipulating industrial robots – Vocabulary
ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
ISO 8573 Compressed air
ISO 8573-1 Contaminants and purity classes
ISO 8573-2 Test methods for oil aerosol content
ISO 8573-3 Test methods for measurement of humidity
ISO 8573-4 Test methods for solid particle content
ISO 8573-5 Test methods for oil vapour and organic solvent content
ISO 8573-6 Test methods for gaseous contaminant content
ISO 8573-7 Test method for viable microbiological contaminant content
ISO 8573-8 Test methods for solid particle content by mass concentration
ISO 8573-9 Test methods for liquid water content
ISO 8583 Financial transaction card originated messages – Interchange message specifications
ISO 8583-1 Messages, data elements and code values
ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
ISO 8583-3 Maintenance procedures for messages, data elements and code values
ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
ISO/IEC 8632-1 Functional specification
ISO/IEC 8632-2 Character encoding
ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
ISO/IEC 8632-4 Clear text encoding
ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
ISO/IEC 8652 Information technology – Programming languages – Ada
ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
ISO/IEEC 8806-4 C
ISO 8807 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
ISO/IEC 8825 Information technology – ASN.1 encoding rules
ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
ISO/IEC 8859-1 Latin alphabet No. 1
ISO/IEC 8859-2 Latin alphabet No. 2
ISO/IEC 8859-3 Latin alphabet No. 3
ISO/IEC 8859-4 Latin alphabet No. 4
ISO/IEC 8859-5 Latin/Cyrillic alphabet
ISO/IEC 8859-6 Latin/Arabic alphabet
ISO/IEC 8859-7 Latin/Greek alphabet
ISO/IEC 8859-8 Latin/Hebrew alphabet
ISO/IEC 8859-9 Latin alphabet No. 5
ISO/IEC 8859-10 Latin alphabet No. 6
ISO/IEC 8859-11 Latin/Thai alphabet
ISO/IEC 8859-13 Latin alphabet No. 7
ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
ISO/IEC 8859-15 Latin alphabet No. 9
ISO/IEC 8859-16 Latin alphabet No. 10
ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
ISO 9000 Quality management systems – Fundamentals and vocabulary
ISO 9001 Quality management systems – Requirements
ISO 9004 Managing for the sustained success of an organization – A quality management approach
ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 9069 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
ISO/IEC 9075 Information technology – Database languages – SQL
ISO/IEC 9126 Software engineering – Product quality
ISO 9141 Road vehicles – Diagnostic systems[Note 3]
ISO 9141-2 CARB requirements for interchange of digital information
ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
ISO 9241 Ergonomics of human-system interaction
ISO/IEC 9293 Information technology – Volume and file structure of disk cartridges for information interchange
ISO 9362 Banking – Banking telecommunication messages – Business identifier code (BIC)
ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
ISO/IEC 9541 Information technology – Font information interchange
ISO/IEC 9541-1:1991 Architecture
ISO/IEC 9541-2:1991 Interchange Format
ISO/IEC 9541-3:1994 Glyph shape representation
ISO/IEC 9541-4:2009 Harmonization to Open Font Format
ISO 9564 Financial services – Personal Identification Number (PIN) management and security[Note 3]
ISO/IEC 9579 Information technology – Remote database access for SQL with security enhancement
ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
ISO/IEC 9636-1 Overview, profiles, and conformance
ISO/IEC 9636-2 Control
ISO/IEC 9636-3 Output
ISO/IEC 9636-4 Segments
ISO/IEC 9636-5 Input and echoing
ISO/IEC 9636-6 Raster
ISO 9660 Information processing – Volume and file structure of CD-ROM for information interchange
ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
ISO/IEC 9797-1 Mechanisms using a block cipher
ISO/IEC 9797-2 Mechanisms using a dedicated hash-function
ISO/IEC 9798 Information technology – Security techniques – Entity authentication
ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
ISO/IEC 9899 Programming languages – C
ISO/IEC/IEEE 9945 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
ISO 9984 Information and documentation – Transliteration of Georgian characters into Latin characters
ISO 9985 Information and documentation – Transliteration of Armenian characters into Latin characters
ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
ISO 9999 Assistive products for persons with disability – Classification and terminology
ISO 10000 – ISO 14999[edit]
ISO 10001:2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations
ISO 10002:2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations
ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
ISO 10004:2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring
ISO 10005:2005 Quality management systems – Guidelines for quality plans
ISO 10006:2003 Quality management systems – Guidelines for quality management in projects
ISO 10007:2003 Quality management systems – Guidelines for configuration management
ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
ISO/TR 10013:2001 Guidelines for quality management system documentation
ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits
ISO 10015:1999 Quality management – Guidelines for training
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
ISO 10018:2012 Quality management – Guidelines on people involvement and competence
ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
ISO/IEC 10026 Information technology – Open Systems Interconnection
ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
ISO/IEC 10089 Information technology – 130 mm rewritable optical disk cartridge for information interchange
ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
ISO/IEC 10118 Information technology – Security techniques – Hash-functions
ISO 10160 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management
ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
ISO/IEC 10206 Information technology – Programming languages – Extended Pascal
ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
ISO/IEC 10279 Information technology – Programming languages – Full BASIC
ISO 10303 Industrial automation systems and integration – Product data representation and exchange
ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
ISO 10383 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
ISO 10487 Passenger cars – Connections for car radios[Note 3]
ISO 10555 Sterile, single-use intravascular catheters
ISO 10579 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
ISO 10628 Flow diagrams for process plants
ISO/IEC 10646 Information technology – Universal Coded Character Set (UCS)
ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
ISO/IEC 10746 Information technology - Open distributed processing
ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference model: Overview
ISO/IEC 10746-2 Information technology - Open distributed processing - Reference model: Foundations
ISO/IEC 10746-3 Information technology - Open distributed processing - Reference model: Architecture
ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference Model: Architectural semantics
ISO 10957 Information and documentation – International standard music number (ISMN)
ISO 10962 Securities and related financial instruments – Classification of Financial Instruments (CFI code)
ISO 10993 Biological evaluation of medical devices
ISO 10993-1 Evaluation and testing within a risk management process
ISO 10993-2 Animal welfare requirements
ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
ISO 10993-4 Selection of tests for interactions with blood
ISO 10993-5 Tests for in vitro cytotoxicity
ISO 10993-6 Tests for local effects after implantation
ISO 10993-7 Ethylene oxide sterilization residuals
ISO 10993-9 Framework for identification and quantification of potential degradation products
ISO 10993-10 Tests for irritation and skin sensitization
ISO 10993-11 Tests for systemic toxicity
ISO 10993-12 Sample preparation and reference materials
ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices
ISO 10993-14 Identification and quantification of degradation products from ceramics
ISO 10993-15 Identification and quantification of degradation products from metals and alloys
ISO 10993-16 Toxicokinetic study design for degradation products and leachables
ISO 10993-17 Establishment of allowable limits for leachable substances
ISO 10993-18 Chemical characterization of materials
ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials
ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
ISO 11064 Ergonomic design of control centres
ISO 11064-1:2000 Principles for the design of control centres
ISO 11064-2:2000 Principles for the arrangement of control suites
ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
ISO 11064-4:2004 Layout and dimensions of workstations
ISO 11064-5:2008 Displays and controls
ISO 11064-6:2005 Environmental requirements for control centres
ISO 11064-7:2006 Principles for the evaluation of control centres
ISO 11120 Gas cylinders -- Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l -- Design construction and testing
ISO 11135:2014 Sterilization of health-care products -- Ethylene oxide -- Requirements for the development, validation and routine control of a sterilization process for medical devices
ISO 11137 Sterilization of health care products – Radiation
ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
ISO/IEC 11179 Information technology – Metadata registries (MDR)
ISO/IEC 11179-1:2004 Framework
ISO/IEC 11179-2:2005 Classification
ISO/IEC 11179-3:2003 Registry metamodel and basic attributes
ISO/IEC 11179-4:2004 Formulation of data definitions
ISO/IEC 11179-5:2005 Naming and identification principles
ISO/IEC 11179-6:2005 Registration
ISO 11357 Plastics – Differential scanning calorimetry (DSC)
ISO 11357-1:2009 General principles
ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
ISO 11357-4:2005 Determination of specific heat capacity
ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-7:2002 Determination of crystallization kinetics
ISO/IEC 11404 Information technology – General-Purpose Datatypes (GPD)
ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
ISO 11469:2000 Plastics – Generic identification and marking of plastics products
ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC)
ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
ISO/IEC 11801 Information technology – Generic cabling for customer premises
ISO 11898 Road vehicles – Controller area network (CAN)
ISO 12006 Building construction – Organization of information about construction works
ISO/IEC 12207 Systems and software engineering – Software life cycle processes
ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
ISO 12639 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
ISO 12641 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
ISO 12859/TR Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
ISO 13007 Ceramic tiles – Grouts and adhesives
ISO 13007-1:2014 Terms, definitions and specifications for adhesives
ISO 13007-2:2010 Test methods for adhesives
ISO 13007-3:2010 Terms, definitions and specifications for grouts
ISO 13007-4:2013 Test methods for grouts
ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
ISO 13239 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
ISO/IEC 13250 Information technology – Topic Maps[Note 3]
ISO 13320:2009 Particle size analysis - Laser diffraction methods
ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels – Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
ISO 13485:2003 Medical devices – Quality management systems – Requirements for regulatory purposes
ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
ISO 13567 Technical product documentation – Organization and naming of layers for CAD
ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
ISO 13577 Industrial furnaces and associated processing equipment - Safety
ISO 13577-1 General requirements
ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
ISO 13579-1 General methodology
ISO 13579-2 Reheating furnaces for steel
ISO 13579-3 Batch-type aluminium melting furnaces
ISO 13579-4 Furnaces with protective or reactive atmosphere
ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
ISO 13616 Financial services – International bank account number (IBAN)
ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
ISO 13628-1 General requirements and recommendations
ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-3 Through flowline (TFL) systems
ISO 13628-4 Subsea wellhead and tree equipment
ISO 13628-5 Subsea umbilicals
ISO 13628-6 Subsea production control systems
ISO 13628-7 Completion/workover riser systems
ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production systems
ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
ISO 13628-10 Specification for bonded flexible pipe
ISO 13628-11 Flexible pipe systems for subsea and marine applications
ISO 13715 Technical drawings—Edges of undefined shape—Vocabulary and indications
ISO 13849 Safety of machinery – Safety related parts of control systems
ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
ISO 14001:2004 Environmental management systems – Requirements with guidance for use
ISO 14004:2004 Environmental management systems – General guidelines on principles, systems and support techniques
ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
ISO 14050 Environmental management – Vocabulary
ISO 14051 Environmental management – Material flow cost accounting - General framework
ISO 14064 Greenhouse gases
ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
ISO 14223 Radiofrequency [sic] identification of animals – Advanced transponders
ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
ISO 14230-1 Physical layer
ISO 14230-2 Data link layer
ISO 14230-3 Application layer
ISO 14230-4 Requirements for emission-related systems
ISO 14405-1 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes
ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
ISO/IEC 14462 - Open-EDI Reference Model
ISO/IEC 14496 Information technology – Coding of audio-visual objects
ISO 14641 Electronic archiving
ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO 14644-1:1999 Classification of air cleanliness
ISO 14644-2:2000 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
ISO 14644-3:2005 Test methods
ISO 14644-4:2001 Design, construction and start-up
ISO 14644-5:2004 Operations
ISO 14644-6:2007 Vocabulary
ISO 14644-7:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
ISO 14644-8:2006 Classification of airborne molecular contamination
ISO/IEC 14651 Information technology – International string ordering and comparison – Method for comparing character strings and description of the common template tailorable ordering
ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
ISO 14698-1 General principles and methods
ISO 14698-2 Evaluation and interpretation of biocontamination data
ISO/IEC 14750 Information technology – Open Distributed Processing – Interface Definition Language
ISO/IEC 14755 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
ISO 14855-1:2005 General method
ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO/IEC 14882 Programming Languages – C++
ISO 14915 Software ergonomics for multimedia user interfaces
ISO 14915-1:2002 Design principles and framework
ISO 14915-2:2003 Multimedia navigation and control
ISO 14915-3:2002 Media selection and combination
ISO 14971:2007 Medical devices – Application of risk management to medical devices
ISO/IEC 14977 Information technology – Syntactic metalanguage – Extended BNF
ISO 15000 – ISO 19999[edit]
ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification (ebCPP)
ISO/TS 15000-2:2004 Message service specification (ebMS)
ISO/TS 15000-3:2004 Registry information model specification (ebRIM)
ISO/TS 15000-4:2004 Registry services specification (ebRS)
ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version 2.01(ebCCTS)
ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials
ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
ISO 15112 Natural gas – Energy determination
ISO 15189 Medical laboratories – Particular requirements for quality and competence
ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
ISO/IEC 15288 Systems and software engineering – System life cycle processes
ISO/IEC 15289 Systems and software engineering – Content of systems and software life cycle process information products (Documentation)
ISO/IEC 15291 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
ISO 15403-1 Designation of the quality
ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
ISO/IEC 15414 - Open data processing - Reference Model - Enterprise Language
ISO/IEC 15434 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
ISO/IEC 15444 Information technology – JPEG 2000 image coding system
ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
ISO 15489-1:2001 Information and documentation – Records management – Part 1: General
ISO/TR 15489-2:2001 Information and documentation – Records management – Part 2: Guidelines
ISO/IEC 15504 Information technology – Process assessment
ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
ISO 15686 Buildings and constructed assets – Service life planning
ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
ISO 15707 Information and documentation – International Standard Musical Work Code (ISWC)
ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
ISO 15836 Information and documentation – The Dublin Core metadata element set
ISO/IEC 15897 Information technology – Procedures for registration of cultural elements
ISO 15924 Information and documentation – Codes for the representation of names of scripts
ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
ISO 15930 Graphic technology – Prepress digital data exchange using PDF[Note 3]
ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques
ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
ISO 16232-8 Particle nature determination by microscopic analysis
ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
ISO 16232-10 Expression of results
ISO/IEC 16262 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
ISO/IEC 16500 Information technology – Generic digital audio-visual systems
ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
ISO 16792 Technical product documentation - Digital product definition data practices
ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design
ISO/IEC 17020:2012 Conformity assessment -- Requirements for the operation of various types of bodies performing inspection
ISO/IEC 17021:2011 Conformity assessment -- Requirements for bodies providing audit and certification of management systems
ISO/IEC TS 17021-2:2012 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 2: Competence requirements for auditing and certification of environmental management systems
ISO/IEC TS 17021-3:2013 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems
ISO/IEC TS 17021-4:2013 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 4: Competence requirements for auditing and certification of event sustainability management systems
ISO/IEC TS 17021-5:2014 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 5: Competence requirements for auditing and certification of asset management systems
ISO/IEC TS 17022:2012 Conformity assessment -- Requirements and recommendations for content of a third-party audit report on management systems
ISO/IEC TS 17023:2013 Conformity assessment -- Guidelines for determining the duration of management system certification audits
ISO/IEC 17024:2003 Conformity assessment – General requirements for bodies operating certification of persons
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 17088:2012 Specifications for compostable plastics
ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
ISO 17799 - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
ISO 17894 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
ISO/IEC 18000 Information technology – Radio frequency identification for item management
ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
ISO/IEC 18004 Information technology – Automatic identification and data capture techniques – QR Code 2005 bar code symbology specification
ISO/IEC 18009 Information technology – Programming languages – Ada: Conformity assessment of a language processor
ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
ISO/IEC 18013-1:2005 Physical characteristics and basic data set
ISO/IEC 18013-2:2008 Machine-readable technologies
ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
ISO/IEC 18023 Information technology – SEDRIS
ISO/IEC 18023-1:2006 Functional specification
ISO/IEC 18023-2:2006 Abstract transmittal format
ISO/IEC 18023-3:2006 Transmittal format binary encoding
ISO/IEC 18024-4:2006 Information technology – SEDRIS language bindings – Part 4: C
ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
ISO/IEC 18026 Information technology – Spatial Reference Model (SRM)
ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
ISO/IEC 18033-1 General
ISO/IEC 18033-2 Asymmetric ciphers
ISO/IEC 18033-3 Block ciphers
ISO/IEC 18033-4 Stream ciphers
ISO/IEC 18041-4 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings – Part 4: C
ISO/IEC 18042-4:2006 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings – Part 4: C
ISO/IEC 18092 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
ISO 18185 Freight containers – Electronic seals
ISO 18245 Retail financial services – Merchant category codes
ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
ISO 18541 Road vehicles – Standardized access to automotive repair and maintenance information (RMI)
ISO 18629 Industrial automation systems and integration – Process specification language
ISO 19005 Document management – Electronic document file format for long-term preservation
ISO 19011:2011 Guidelines for auditing management systems
ISO 19092 Financial services – Biometrics – Security framework
ISO 19101 Geographic information – Reference model
ISO/TS 19103 Geographic information – Conceptual schema language
ISO/TS 19104 Geographic information – Terminology
ISO 19105 Geographic information – Conformance and testing
ISO 19106 Geographic information – Profiles
ISO 19107 Geographic information – Spatial schema
ISO 19108 Geographic information – Temporal schema
ISO 19109 Geographic information – Rules for application schema
ISO 19110 Geographic information – Methodology for feature cataloguing
ISO 19111 Geographic information – Spatial referencing by coordinates
ISO 19112 Geographic information – Spatial referencing by geographic identifiers
ISO 19113 Geographic information – Quality principles
ISO 19114 Geographic information – Quality evaluation procedures
ISO 19115 Geographic information – Metadata
ISO 19116 Geographic information – Positioning services
ISO 19117 Geographic information – Portrayal
ISO 19118 Geographic information – Encoding
ISO 19119 Geographic information – Services
ISO/TR 19120 Geographic information – Functional standards
ISO/TR 19121 Geographic information – Imagery and gridded data
ISO/TR 19122 Geographic information / Geomatics – Qualification and certification of personnel
ISO 19123 Geographic information – Schema for coverage geometry and functions
ISO 19125 Geographic information – Simple feature access
ISO 19126 Geographic information – Feature concept dictionaries and registers
ISO/TS 19127 Geographic information – Geodetic codes and parameters
ISO 19128 Geographic information – Web map server interface
ISO/TS 19129 Geographic information – Imagery, gridded and coverage data framework
ISO/TS 19130 Geographic information – Imagery sensor models for geopositioning
ISO 19131 Geographic information – Data product specifications
ISO 19132 Geographic information – Location-based services – Reference model
ISO 19133 Geographic information – Location-based services – Tracking and navigation
ISO 19134 Geographic information – Location-based services – Multimodal routing and navigation
ISO 19135 Geographic information – Procedures for item registration
ISO 19136 Geographic information – Geography Markup Language (GML)
ISO 19137 Geographic information – Core profile of the spatial schema
ISO/TS 19138 Geographic information – Data quality measures
ISO/TS 19139 Geographic information – Metadata – XML schema implementation
ISO 19141 Geographic information – Schema for moving features
ISO 19142 Geographic information – Web Feature Service
ISO 19143 Geographic information – Filter encoding
ISO 19144 Geographic information – Classification systems
ISO 19146 Geographic information – Cross-domain vocabularies
ISO 19156 Geographic information - Observations and measurements
ISO 19439 Enterprise integration – Framework for enterprise modelling
ISO 19440 Enterprise integration – Constructs for enterprise modelling
ISO/IEC 19501 Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
ISO/IEC 19502 Information technology – Meta Object Facility (MOF)
ISO/IEC 19503 Information technology – XML Metadata Interchange (XMI)
ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
ISO/IEC 19757-2 Regular-grammar-based validation – RELAX NG
ISO/IEC 19757-3 Rule-based validation – Schematron
ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
ISO/IEC 19770 Information technology – Software asset management
ISO/IEC 19785 Information technology – Common Biometric Exchange Formats Framework
ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
ISO/IEC 19790 Information technology – Security techniques – Security requirements for cryptographic modules
ISO/IEC 19793 - Open Distributed Processing -- Use of UML for ODP system specifications
ISO/IEC 19794 Information technology – Biometric data interchange formats
ISO/IEC 19794-1:2011 Framework
ISO/IEC 19794-2:2005 Finger minutiae data
ISO/IEC 19794-3:2006 Finger pattern spectral data
ISO/IEC 19794-4:2005 Finger image data
ISO/IEC 19794-5:2005 Face image data
ISO/IEC 19794-6:2005 Iris image data
ISO/IEC 19794-7:2007 Signature/sign time series data
ISO/IEC 19794-8:2006 Finger pattern skeletal data
ISO/IEC 19794-9:2007 Vascular image data
ISO/IEC 19794-10:2007 Hand geometry silhouette data
ISO 20000 – ISO 29999[edit]
ISO/IEC 20000 Information technology – Service management
ISO 20022 Financial services – UNIversal Financial Industry message scheme
ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
ISO/IEC TR 20943-1:2003 Data elements
ISO/IEC TR 20943-3:2004 Value domains
ISO/IEC 21000 Information technology – Multimedia framework (MPEG-21)
ISO/IEC 21481 Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2)
ISO 21482 Ionizing-radiation warning – Supplementary symbol
ISO 21500 Guidance on project management
ISO 22000:2005 Food safety management systems – Requirements for any organization in the food chain
ISO/TS 22002 Prerequisite programmes on food safety
ISO/TS 22002-1:2009 Prerequisite programmes on food safety – Part 1: Food manufacturing
ISO/TS 22002-2:2013 Prerequisite programmes on food safety – Part 2: Catering
ISO/TS 22002-3:2011 Prerequisite programmes on food safety – Part 3: Farming
ISO/TS 22003:2013 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
ISO 22004:2014 Food safety management systems – Guidance on the application of ISO 22000
ISO 22005:2007 Traceability in the feed and food chain – General principles and basic requirements for system design and implementation
ISO 22093 Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
ISO 22241 Diesel engines – NOx reduction agent AUS 32
ISO 22241-1 Quality requirements
ISO 22241-2 Test methods
ISO 22241-3 Handling, transportation and storing
ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
ISO/IEC TR 22250-1:2002 RELAX Core
ISO 22301:2012 Societal security – Business continuity management systems – Requirements
ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity management
ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
ISO/IEC 23001 – Information technology – MPEG systems technologies
ISO/IEC 23001-1:2006 – Part 1: Binary MPEG format for XML
ISO/IEC 23001-2:2008 – Part 2: Fragment request units
ISO/IEC 23001-3:2008 – Part 3: XML IPMP messages
ISO/IEC 23001-4:2014 – Part 4: Codec configuration representation
ISO/IEC 23001-5:2008 – Part 5: Bitstream Syntax Description Language (BSDL)
ISO/IEC 23001-7:2015 – Part 7: Common encryption in ISO base media file format files
ISO/IEC 23001-8:2013 – Part 8: Coding-independent code points
ISO/IEC 23001-9:2014 – Part 9: Common encryption of MPEG-2 transport streams
ISO/IEC 23002 Information technology – MPEG video technologies
ISO/IEC 23003 Information technology – MPEG audio technologies
ISO/IEC 23003-1 MPEG Surround
ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)
ISO/IEC 23270 Information technology – Programming languages – C#
ISO/IEC 23271 Information technology – Common Language Infrastructure (CLI)
ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
ISO/IEC 23360-1 Generic specification
ISO/IEC 23360-2 Specification for IA32 architecture
ISO/IEC 23360-3 Specification for IA64 architecture
ISO/IEC 23360-4 Specification for AMD64 architecture
ISO/IEC 23360-5 Specification for PPC32 architecture
ISO/IEC 23360-6 Specification for PPC64 architecture
ISO/IEC 23360-7 Specification for S390 architecture
ISO/IEC 23360-8 Specification for S390X architecture
ISO 23733 Textiles – Chenille yarns – Test method for the determination of linear density
ISO 23950 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification
ISO/IEC 24707:2007 Information technology – Common Logic (CL): a framework for a family of logic-based languages
ISO/IEC 24727 Identification cards – Integrated circuit card programming interfaces
ISO/IEC 24727-1 Architecture
ISO/IEC 24727-2 Generic card interface
ISO/IEC 24727-3 Application interface
ISO/IEC 24727-4 Application programming interface (API) administration
ISO/IEC 24727-5 Testing procedures
ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability
ISO/IEC 24744:2007 Software Engineering – Metamodel for Development Methodologies
ISO/IEC TR 24748:2010 Systems and software engineering - Life cycle management
ISO/IEC 24762:2008 Information technology – Security techniques – Guidelines for information and communications technology disaster recovery services
ISO 26000 Guidance on social responsibility
ISO/IEC 26300 Information technology – Open Document Format for Office Applications (OpenDocument) v1.0
ISO/IEC 27000 Information technology – Security techniques – Information security management systems – Overview and vocabulary
ISO/IEC 27001 Information technology – Security techniques – Information security management systems – Requirements
ISO/IEC 27002 Information technology – Security techniques – Code of practice for information security management
ISO/IEC 27003 Information technology – Security techniques – Information security management system implementation guidance
ISO/IEC 27004 Information technology – Security techniques – Information security management – Measurement
ISO/IEC 27005 Information technology – Security techniques – Information security risk management
ISO/IEC 27006 Information technology – Security techniques – Requirements for bodies providing audit and certification of information security management systems
ISO/IEC 27011 Information technology – Security techniques – Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
ISO/IEC 27037:2012 Information technology – Security techniques – Guidelines for identification, collection, acquisition and preservation of digital evidence
ISO/TS 27687:2008 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate
ISO 27799:2008 Health informatics -- Information security management in health using ISO/IEC 27002
ISO 28000 Specification for security management systems for the supply chain
ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
ISO 28003 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
ISO/PAS 28007:2012 Ships and marine technology -- Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
ISO/IEC 29119 Software and systems engineering – Software testing
ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
ISO/IEC 29500-1 Fundamentals and Markup Language Reference
ISO/IEC 29500-2 Open Packaging Conventions
ISO/IEC 29500-3 Markup Compatibility and Extensibility
ISO/IEC 29500-4 Transitional Migration Features
ISO 30000 – ISO 39999[edit]
ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
ISO 31000:2009 Risk management – Principles and guidelines
ISO/IEC 31010:2009 Risk management - Risk assessment techniques
ISO 32000 Document management – Portable document format
ISO/IEC 38500:2008 Corporate governance of information technology
ISO/IEC 40500:2012 Information technology – W3C Web Content Accessibility Guidelines (WCAG) 2.0
ISO 50000 - ISO 59999[edit]
ISO 50001:2011 Energy management systems – Requirements with guidance for use
ISO 55000:2014 Asset management – Overview, principles and terminology
ISO 80000[edit]
ISO/IEC 80000 Quantities and units
ISO/TS 80004 Nanotechnologies – Vocabulary
ISO/TS 80004-1 Core terms
ISO/TS 80004-3 Carbon nano-objects
ISO/TS 80004-4 Nanostructured materials
ISO/TS 80004-5 Nano/bio interface
ISO/TS 80004-7 Diagnostics and therapeutics for healthcare