ASME B16.5-2013
(Revision of ASME B16.5-2009)
Pipe Flanges and
Flanged Fittings
NPS 1/2 Through NPS 24
Metric/Inch Standard
A N A M E R I C A N N AT I O N A L STA N DA R D
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(Revision of ASME B16.5-2009)
Pipe Flanges and
Flanged Fittings
NPS 1⁄2 Through NPS 24
Metric/Inch Standard
A N A M E R I C A N N AT I O N A L S TA N D A R D
Two Park Avenue • New York, NY • 10016 USA
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Date of Issuance: April 29, 2013
The next edition of this Standard is scheduled for publication in 2015.
ASME issues written replies to inquiries concerning interpretations of technical aspects of this
Standard. Interpretations are published on the ASME Web site under the Committee Pages at
http://cstools.asme.org/ as they are issued.
Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to
provide corrections to incorrectly published items, or to correct typographical errors in codes and
standards. Such errata shall be used on the date posted.
The Committee Pages can be found at http://cstools.asme.org/. There is an option available to
automatically receive an e-mail notification when errata are posted to a particular code or standard.
This option can be found on the appropriate Committee Page after selecting “Errata” in the “Publication
Information” section.
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the criteria for American National
Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from
competent and concerned interests have had an opportunity to participate. The proposed code or standard was made
available for public review and comment that provides an opportunity for additional public input from industry, academia,
regulatory agencies, and the public at large.
ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in connection with any
items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for
infringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expressly
advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is
entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as
government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in accordance with the established
ASME procedures and policies, which precludes the issuance of interpretations by individuals.
No part of this document may be reproduced in any form,
in an electronic retrieval system or otherwise,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers
Two Park Avenue, New York, NY 10016 5990
Copyright © 2013 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All rights reserved
Printed in U.S.A.
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
CONTENTS
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correspondence With the B16 Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi
ix
x
xi
1
Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2
Pressure–Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
Component Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
5
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
6
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
7
Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
8
Pressure Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
Bevel for Outside Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel for Inside Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel for Combined Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Straight Hub Welding Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Method of Designating Outlets of Reducing Fittings in Specifications . . . . .
End Flange Facings and Their Relationship to Flange Thickness and
Center-to-End and End-to-End Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel for Wall Thicknesses t From 5 mm to 22 mm Inclusive . . . . . . . . . . . . .
Bevel for Wall Thicknesses t Greater Than 22 mm . . . . . . . . . . . . . . . . . . . . . . . .
Inside Contour for Use With Rectangular Backing Ring . . . . . . . . . . . . . . . . . . .
Inside Contour for Use With Taper Backing Ring . . . . . . . . . . . . . . . . . . . . . . . . .
Thread Length for Connection Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Socket Welding for Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bosses for Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Butt Welding for Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Method of Designating Location of Auxiliary Connections When
Specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
15
15
16
22
List of Material Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Bolting Specifications Applicable ASTM Specifications . . . . . . . . . . . . .
Flange Bolting Dimensional Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.1 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.2 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.3 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.4 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.5 Materials . . . . . . . . . . . . . . . . . . .
4
8
12
23
24
25
26
27
Figures
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Tables
1A
1B
1C
2-1.1
2-1.2
2-1.3
2-1.4
2-1.5
iii
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
17
19
19
20
20
21
21
21
21
2-1.7
2-1.9
2-1.10
2-1.11
2-1.13
2-1.14
2-1.15
2-1.17
2-1.18
2-2.1
2-2.2
2-2.3
2-2.4
2-2.5
2-2.6
2-2.7
2-2.8
2-2.9
2-2.10
2-2.11
2-2.12
2-3.1
2-3.2
2-3.3
2-3.4
2-3.5
2-3.6
2-3.7
2-3.8
2-3.9
2-3.10
2-3.11
2-3.12
2-3.13
2-3.14
2-3.15
2-3.16
2-3.17
2-3.19
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Pressure–Temperature Ratings for Group 1.7 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.9 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.10 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.11 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.13 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.14 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.15 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.17 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 1.18 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.1 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.2 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.3 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.4 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.5 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.6 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.7 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.8 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.9 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.10 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.11 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 2.12 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.1 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.2 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.3 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.4 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.5 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.6 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.7 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.8 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.9 Materials . . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.10 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.11 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.12 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.13 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.14 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.15 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.16 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.17 Materials . . . . . . . . . . . . . . . . . .
Pressure–Temperature Ratings for Group 3.19 Materials . . . . . . . . . . . . . . . . . .
Permissible Imperfections in Flange Facing Finish for Raised Face and
Large Male and Female Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of Facings (Other Than Ring Joints, All Pressure Rating
Classes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of Ring-Joint Facings (All Pressure Rating Classes) . . . . . . . . . . .
Reducing Threaded and Slip-On Flanges for Classes 150 Through
2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Templates for Drilling Class 150 Pipe Flanges and Flanged Fittings . . . . . . .
Dimensions of Class 150 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of Class 150 Flanged Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Templates for Drilling Class 300 Pipe Flanges and Flanged Fittings . . . . . . .
Dimensions of Class 300 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of Class 300 Flanged Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Templates for Drilling Class 400 Pipe Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of Class 400 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Templates for Drilling Class 600 Pipe Flanges and Flanged Fittings . . . . . . .
Dimensions of Class 600 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
49
50
50
51
52
53
54
55
56
56
57
58
59
60
61
62
62
63
64
66
70
71
72
75
80
81
84
88
89
91
92
17
18
19
20
21
22
Templates for Drilling Class 900 Pipe Flanges and Flanged Fittings . . . . . . .
Dimensions of Class 900 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Templates for Drilling Class 1500 Pipe Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of Class 1500 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Templates for Drilling Class 2500 Pipe Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions of Class 2500 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mandatory Appendices
I
Threading of Pipe for American National Standard Threaded Flanges . . . . .
II
Pressure–Temperature Ratings and Dimensional Data for Classes 150, 300,
400, 600, 900, 1500, and 2500 Flanges and Classes 150 and 300
Flanged Fittings in U.S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
III
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nonmandatory Appendices
A
Method Used for Establishing Pressure–Temperature Ratings . . . . . . . . . . . . .
B
Limiting Dimensions of Gaskets Other Than Ring Joint Gaskets . . . . . . . . . .
C
Method for Calculating Bolt Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D
Quality System Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E
Dimensions of Classes 400, 600, 900, 1500, and 2500 Flanged Fittings in
U.S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
94
95
97
98
100
101
103
105
193
196
200
202
204
205
FOREWORD
In 1920, the American Engineering Standards Committee [later the American Standards
Associations (ASA)] organized Sectional Committee B16 to unify and further develop standards
for pipe flanges and fittings (and later for valves and gaskets). Cosponsors of the B16 Committee
were ASME, the Heating and Piping Contractors National Association [now Mechanical
Contractors Association of America (MCAA)], and the Manufacturers Standardization Society
of the Valves and Fittings Industry (MSS). Cosponsors were later designated as cosecretariat
organizations.
The Committee soon recognized the need for standardization of steel pipe flanges. In May,
1923, Subcommittee 3 was organized to develop such standards for pressures in the 250-psi to
3,200-psi range and for elevated temperatures. Active work began in October, including steel
flanged fittings. The first proposed standard was submitted to the Committee in April 1926 and
approved by letter ballot in December. After favorable review by the three sponsor organizations,
the Standard was approved as American Tentative Standard B16e in June 1927.
Experience in using the Standard showed the need for hub dimensions of companion flanges
and for other changes, including rerating of 250-lb and 1,350-lb flanges and development of
flanged fittings with integral bases. An investigation was made into the factors determining
stiffness of flanges and flange hubs. The revised edition was approved as ASA B16E-1932.
A revision was initiated in 1936, stimulated by suggestions from Committee members and
industrial users. The resulting 1939 edition contained standards for welding neck flanges (completed in March 1937), 1,500-lb flanges in the 14-in. through 24-in. range, 2,500-lb flanges and
flanged fittings in the 1⁄2-in. through 12-in. range, and dimensions for a full line of ring joint
flanges developed by the American Petroleum Institute. Pressure–temperature ratings for alloy
steel flanges and fittings, developed by Subcommittee 4, were included for the first time.
In August 1942, the War Production Board requested a review of measures to conserve vital
materials in piping components. A special War Committee of B16 was appointed and, operating
under War Standard Procedure, developed revised pressure–temperature ratings for all materials
and pressure classes. The ratings were published as American War Standard B16e5-1943. In 1945,
under normal procedures, Subcommittees 3 and 4 reviewed the 1939 standard and 1943 ratings
and recommended adoption of the wartime ratings. Their report was approved as Supplement
No. 1 to B16e-1939 and published as ASA B16e6-1949. In addition to ratings, the supplement
updated material specification references and added a table of metal wall thickness for weldingend valves.
Subcommittee 3 then began a revision of the entire standard. Technically, the 1949 Supplement
was absorbed, new materials were recognized, a general rating method was developed and
added as an appendix, and welding end preparations were expanded. Editorially, a new style of
presentation was worked out, including tables rearranged for easier use. Approval by Sectional
Committee, cosponsors, and ASA resulted in the publication of ASA B16.5-1953 (designation
changed from B16e).
Work soon began on further revisions. Class B ratings were deleted, and Class A ratings were
clarified as the standard. An appendix defined qualifications for gaskets, other than ring joint,
which would merit the ratings. Another appendix defined the method for calculating bolt lengths,
including the measurement of stud bolt length between thread ends instead of points. Pressure–
temperature ratings for several new materials were added, the table of welding end dimensions
was expanded, and the temperatures used in determining ratings were redefined. The resulting
new edition, after approval, was published as ASA B16.5-1957.
The more modest revision approved as ASA B16.5-1961 changed the text to clarify the intent
or to make requirements easier to administer. The next revision began in 1963 with nearly 100
comments and suggestions. No fundamental changes were made, but the text was further clarified,
and wall thicknesses less than 1⁄4 in. for flanged fittings were recognized in the 1968 edition.
vi
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
A new joint study of ratings between Subcommittees 3 and 4 was initiated before the next
revision. Based on the Subcommittee 4 report, the rating procedure was revised, and a rating
basis for Class 150 (150 lb) flanges was developed. New product forms, bar and plate, were added
for special applications, including fabricated flanged valves and fittings. Reference to weldingend valves was not included, because a separate standard for them was. Bolt length calculations
based on worst case tolerances led to a revision of tabulated lengths. Testing of valves subsequently
published by SC 15 closure members was added to the test requirements. Following final approval
on October 23, the Standard was published as ANSI B16.5-1973.
Subcommittee N (formerly 15) was assigned responsibility for all valve standards in late 1973.
Subcommittee C (formerly 3) continues to have responsibility for flange standards. A revision
was accordingly initiated to remove all references to valves. At the same time, comments from
users and changes in the ASME Boiler and Pressure Vessel Code led to significant revisions in
the Class 150 rating basis and in the ratings of stainless steel and certain alloy steel flanges and
flanged fittings in all rating classes. Extensive public review comments led to the addition of
considerations for bolting and gaskets for flanged joints and of marking requirements. To avoid
frequent and confusing changes in ratings as further changes in Code allowable stresses are made,
it was agreed with Subcommittee N to leave ratings alone unless the relevant Code stress values are
changed by more than 10%. After final approval by the Standards Committee, cosponsors, and
ANSI, ANSI B16.5-1977, Steel Pipe Flanges and Flanged Fittings, was published on June 16, 1977.
In 1979, work began on another new edition. Materials coverage was expanded by the addition
of nickel and nickel alloys. Bolting rules were revised to cover nickel alloy bolts. Bolt hole and
bolting were changed to provide interchangeability between inch and metric dimensions. Metric
dimensional tables were made informational rather than alternative requirements of the Standard.
Final approval was granted for ANSI B16.5-1984, Pipe Flanges and Flanged Fittings on August 14.
In 1982, American National Standards Committee B16 was reorganized as an ASME Committee
operating under procedures accredited by ANSI. The 1988 edition of the Standard extended
nickel alloy ratings to higher temperatures, clarifying flat face flange requirements, and included
other minor revisions. The Committee determined that any metric standard for flanges will stand
alone, with metric bolting and gaskets; hence, metric equivalents have been deleted. Following
approval by the Standard Committee and ASME, approval as an American National Standard
was given by ANSI on April 7, 1988, with the new designation ASME/ANSI B16.5-1988.
The 1996 Edition allowed flanges marked with more than one material grade or specification,
revised flange facing finish requirements, revised pressure–temperature ratings for several material groups, added a nonmandatory quality system annex, and included several other revisions.
The 1996 Edition was approved by ANSI on October 3, 1996, with the new designation
ASME B16.5-1996.
The 2003 Edition included metric units as the primary reference units while maintaining U.S.
Customary units in either parenthetical or separate forms. New materials were added while some
materials were shifted from one group to another, and new material groups were established.
All pressure–temperature ratings were recalculated using data from the latest edition of the
ASME Boiler and Pressure Vessel Code, Section II, Part D. Annex F was added to cover pressure–
temperature ratings and dimensional data for Class 150 through 2500 flanges and Class 150 and
300 flanged fittings in U.S. Customary units. Table and figure numbers in Annex F were prefixed
by the letter F and corresponded to table and figure numbers in the main text for the metric
version, with the exception of some table and figure numbers that were not used in Annex F. Of
note, the flange thickness designations for Class 150 and 300 were revised with reference to their
raised faces. For these classes, the flange thickness dimensional reference planes were altered;
however, required flange thickness remained unchanged. The minimum flange thickness designation was changed from C to tf, and it did not include 2.0 mm (0.06 in.) raised face for Class 150
and 300 raised face flanges and flanged fittings. Because of diminished interest, flanged end
fittings conforming to ASME Class 400 and higher were listed only with U.S. Customary units
in Annex G. In addition, straight hub welding flanges were incorporated as a new set of flanges
in Classes 150 through 2500. Also, there were numerous requirement clarifications and editorial
revisions. The 2003 Edition was approved by ANSI on July 9, 2003, with the designation
ASME B16.5-2003.
vii
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
The 2009 Edition added new materials, updated some pressure–temperature ratings, and designated the annexes as mandatory and nonmandatory appendices. The mandatory appendices
were numbered using roman numerals, and the nonmandatory appendices are referenced using
capital letters. The 2009 Edition was approved by ANSI on February 19, 2009, with the designation
ASME B16.5-2009.
The 2013 Edition includes a revision to the Materials paragraph 5.1 and includes the addition
of perpendicularity tolerances. Additional errata and clarifying revisions have also been applied.
Following approval of the Standards Committee and ASME, approval for the new edition was
granted by the American National Standards Institute on February 5, 2013.
Requests for interpretations or suggestions for revisions should be sent to the Secretary,
B16 Standards Committee, Two Park Avenue, New York, NY 10016-5990.
viii
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16 COMMITTEE
Standardization of Valves, Flanges,
Fittings, and Gaskets
(The following is the roster of the Committee at the time of approval of this Standard.)
STANDARDS COMMITTEE OFFICERS
W. B. Bedesem, Chair
M. L. Nayyar, Vice Chair
C. E. O’Brien, Secretary
STANDARDS COMMITTEE PERSONNEL
G. A. Jolly, Vogt Valves/Flowserve
M. Katcher, Haynes International
W. N. McLean, B&L Engineering
T. A. McMahon, Emerson Process Management
M. L. Nayyar, Bechtel Power Corp.
C. E. O’Brien, Secretary, The American Society of Mechanical
Engineers
W. H. Patrick, The Dow Chemical Co.
R. A. Schmidt, Canadoil
H. R. Sonderegger, Fluoroseal, Inc.
W. M. Stephan, Flexitallic LP
D. A. Williams, Southern Co. Services
A. Appleton, Alloy Stainless Products Co., Inc.
R. W. Barnes, ANRIC Enterprises, Inc.
W. B. Bedesem, Consultant
R. M. Bojarczuk, ExxonMobil Research & Engineering Co.
D. F. Buccicone, Consultant
A. M. Cheta, Shell Exploration and Production Co.
M. Clark, Nibco, Inc.
G. A. Cuccio, Capitol Manufacturing Co.
C. E. Davila, Crane Valves
D. R. Frikken, Becht Engineering Co.
R. P. Griffiths, U.S. Coast Guard
SUBCOMMITTEE C — STEEL FLANGES AND FLANGED FITTINGS
J. R. Holstrom, Val Matic Valve & Manufacturing Corp.
M. Katcher, Haynes International
W. N. McLean, B&L Engineering
M. L. Nayyar, Bechtel Power Corp.
W. H. Patrick, The Dow Chemical Co.
D. W. Rahoi, CCM 2000
T. V. Ramakrishnan, Forged Vessel Connections
R. A. Schmidt, Canadoil
D. E. Tezzo, Tyco Valves & Controls
J. P. Tucker, Flowserve
G. T. Walden, Wolseley
M. M. Zaidi, Jacobs
C. E. Davila, Chair, Crane Energy
J. P. Ellenberger, Vice Chair, Consultant
A. P. Maslowski, Secretary, The American Society of Mechanical
Engineers
A. Appleton, Alloy Stainless Products Co., Inc.
W. B. Bedesem, Consultant
W. J. Birkholz, Flowline Division, Ezeflow USA
A. M. Cheta, Shell Exploration and Production Co.
B. Dennis, Kerkau Manufacturing
D. R. Frikken, Becht Engineering Co.
E. Gulgan, International Standard Valve, Inc.
G. Hailegiorgis, Contributing Member, Ameriforge Group, Inc.
ix
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
CORRESPONDENCE WITH THE B16 COMMITTEE
General. ASME Standards are developed and maintained with the intent to represent the
consensus of concerned interests. As such, users of this Standard may interact with the Committee
by requesting interpretations, proposing revisions, and attending Committee meetings. Correspondence should be addressed to:
Secretary, B16 Standards Committee
The American Society of Mechanical Engineers
Two Park Avenue
New York, NY 10016-5990
As an alternative, inquiries may be submitted via e-mail to: SecretaryB16@asme.org.
Proposing Revisions. Revisions are made periodically to the Standard to incorporate changes
that appear necessary or desirable, as demonstrated by the experience gained from the application
of the Standard. Approved revisions will be published periodically.
The Committee welcomes proposals for revisions to this Standard. Such proposals should be
as specific as possible, citing the paragraph number(s), the proposed wording, and a detailed
description of the reasons for the proposal, including any pertinent documentation.
Proposing a Case. Cases may be issued for the purpose of providing alternative rules when
justified, to permit early implementation of an approved revision when the need is urgent, or to
provide rules not covered by existing provisions. Cases are effective immediately upon
ASME approval and shall be posted on the ASME Committee Web page.
Requests for Cases shall provide a Statement of Need and Background Information. The request
should identify the Standard, the paragraph, figure or table number(s), and be written as a
Question and Reply in the same format as existing Cases. Requests for Cases should also indicate
the applicable edition(s) of the Standard to which the proposed Case applies.
Interpretations. Upon request, the B16 Committee will render an interpretation of any requirement of the Standard. Interpretations can only be rendered in response to a written request sent
to the Secretary of the B16 Standards Committee.
The request for interpretation should be clear and unambiguous. It is further recommended
that the inquirer submit his/her request in the following format:
Subject:
Edition:
Question:
Cite the applicable paragraph number(s) and the topic of the inquiry.
Cite the applicable edition of the Standard for which the interpretation is
being requested.
Phrase the question as a request for an interpretation of a specific requirement
suitable for general understanding and use, not as a request for an approval
of a proprietary design or situation. The inquirer may also include any plans
or drawings that are necessary to explain the question; however, they should
not contain proprietary names or information.
Requests that are not in this format will be rewritten in this format by the Committee prior
to being answered, which may inadvertently change the intent of the original request.
ASME procedures provide for reconsideration of any interpretation when or if additional
information that might affect an interpretation is available. Further, persons aggrieved by an
interpretation may appeal to the cognizant ASME Committee or Subcommittee. ASME does not
“approve,” “certify,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
Attending Committee Meetings. The B16 Standards Committee regularly holds meetings, which
are open to the public. Persons wishing to attend any meeting should contact the Secretary of
the B16 Standards Committee.
x
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
SUMMARY OF CHANGES
Following approval by the ASME B16 Committee and ASME, and after public review,
ASME B16.5-2013 was approved by the American National Standards Institute on
February 5, 2013.
ASME B16.5-2013 includes the following changes identified by a margin note, (13).
Page
Location
Change
3
2.8.1
Revised
7
5.1
Revised in its entirety
10
6.4.3.5
Second table reference corrected by errata
12
Table 1C
Spelling of “coarse” corrected in four
places by errata
13
7.3
(1) First paragraph revised
(2) Second paragraph and subpara. (e)
added
7.4
U.S. Customary values under Tolerance
heading revised
15
Fig. 4
Notes corrected by errata
17, 18
Fig. 6
Revised in its entirety
25
Table 2-1.3
Note (6) revised
28
Table 2-1.7
Note (3) revised
29
Table 2-1.9
Note (3) revised
30
Table 2-1.10
Note (4) revised
32
Table 2-1.13
Note (2) revised
33
Table 2-1.14
Note (2) revised
34
Table 2-1.15
Note (1) revised
49
Table 2-3.2
Note (2) and its reference deleted
64
Table 4
In Col. 13 head, Note reference revised
66–69
Table 5
Notes revised and renumbered
70
Table 6
Graphic for Threaded revised
71
Table 7
Note (1) reference deleted from Length of
Bolts, L, column head
72
Table 8
Graphic for Threaded revised
77
Table 9
Base Drilling head corrected to span
Cols. 22 and 23 only
80
Table 10
Note (1) reference deleted from Length of
Bolts, L, column head
82
Table 11
Note references revised in Col. 3 head
xi
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Page
Location
Change
84–87
Table 12
(1) Notes in column heads revised
(2) In Col. 16, last entry revised
(3) Notes (4) and (5) transposed
102
Table 22
Note (1) revised
106, 107
Fig. II-6
Revised in its entirety
113
Table II-2-1.3
Note (6) revised
116
Table II-2-1.7
Note (3) revised
117
Table II-2-1.9
Note (3) revised
118
Table II-2-1.10
Note (4) revised
120
Table II-2-1.13
Note (2) revised
121
Table II-2-1.14
Note (2) revised
122
Table II-2-1.15
Note (1) revised
132
Table II-2-2.8
Under Working Pressures by Classes,
psig, first entry in first column
corrected by errata
137
Table II-2-3.2
Note (2) and its reference deleted
146
Table II-2.3.11
Under Forgings column, ASTM
designator corrected by errata
159
Table II-5
Tolerances revised
160
Table II-6
Graphic for Threaded revised
162
Table II-8
Graphic for Threaded revised
165, 166
Table II-9
(1) Under Col. 2, first entry corrected
(2) Under Col. 3, fifth and eighteenth
entries corrected
171
Table II-11
Note reference revised in Col. 6 head
174–177
Table II-12
(1) Notes in column heads revised
(2) Notes (4) and (5) transposed
192
Table II-22
Note (1) revised
193
Mandatory Appendix III
First paragraph revised
197
A2.4
Equation reference in subpara. (a)
corrected by errata
xii
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
PIPE FLANGES AND FLANGED FITTINGS
NPS 1⁄2 THROUGH NPS 24 METRIC/INCH STANDARD
1
SCOPE
Edition, provided that it can be demonstrated that all
requirements of this Edition have been met. Where such
components were installed in accordance with the pressure–temperature ratings of an earlier edition of this
Standard, those ratings are applicable except as may be
governed by the applicable code or regulation.
1.1 General
(a) This Standard covers pressure–temperature
ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe
flanges and flanged fittings. Included are
(1) flanges with rating class designations 150, 300,
400, 600, 900, and 1500 in sizes NPS 1⁄2 through NPS 24
and flanges with rating class designation 2500 in sizes
NPS 1⁄2 through NPS 12, with requirements given in both
metric and U.S. Customary units with diameter of bolts
and flange bolt holes expressed in inch units
(2) flanged fittings with rating class designation
150 and 300 in sizes NPS 1⁄2 through NPS 24, with requirements given in both metric and U.S. Customary units
with diameter of bolts and flange bolt holes expressed
in inch units
(3) flanged fittings with rating class designation
400, 600, 900, and 1500 in sizes NPS 1⁄2 through NPS 24
and flanged fittings with rating class designation 2500
in sizes 1⁄2 through NPS 12 that are acknowledged in
Nonmandatory Appendix E in which only U.S.
Customary units are provided
(b) This Standard is limited to
(1) flanges and flanged fittings made from cast or
forged materials
(2) blind flanges and certain reducing flanges made
from cast, forged, or plate materials
Also included in this Standard are requirements and
recommendations regarding flange bolting, gaskets, and
joints.
1.4 User Accountability
This Standard cites duties and responsibilities that are
to be assumed by the flange or flanged fitting user in the
areas of, for example, application, installation, system
hydrostatic testing, operation, and material selection.
1.5 Quality Systems
Requirements relating to the product manufacturer’s
Quality System Program are described in
Nonmandatory Appendix D.
1.6 Relevant Units
This Standard states values in both SI (Metric) and
U.S. Customary units. As an exception, diameter of bolts
and flange bolt holes are expressed in inch units only.
These systems of units are to be regarded separately as
standard. Within the text, the U.S. Customary units are
shown in parentheses or in separate tables that appear
in Mandatory Appendix II. The values stated in each
system are not exact equivalents; therefore, it is required
that each system of units be used independently of the
other. Except for diameter of bolts and flange bolt holes,
combining values from the two systems constitutes nonconformance with the Standard.
1.7 Selection of Materials
1.2 References
Codes, standards, and specifications, containing provisions to the extent referenced herein, constitute
requirements of this Standard. These reference documents are listed in Mandatory Appendix III.
Criteria for selection of materials suitable for particular fluid service are not within the scope of this Standard.
1.8 Convention
For determining conformance with this Standard, the
convention for fixing significant digits where limits
(maximum and minimum values) are specified shall be
as defined in ASTM E29. This requires that an observed
or calculated value be rounded off to the nearest unit
in the last right-hand digit used for expressing the limit.
Decimal values and tolerances do not imply a particular
method of measurement.
1.3 Time of Purchase, Manufacture, or Installation
The pressure–temperature ratings in this Standard are
applicable upon its publication to all flanges and flanged
fittings within its scope, which otherwise meet its
requirements. For unused flanges or flanged fittings
maintained in inventory, the manufacturer of the flange
or flanged fittings may certify conformance to this
1
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
1.9 Denotation
joints not conforming to these limitations is the responsibility of the user.
1.9.1 Pressure Rating Designation. Class, followed
by a dimensionless number, is the designation for
pressure–temperature ratings as follows:
Class
150
300
400
600
900
1500
2.3.2 Mixed Flanged Joints. If the two flanges in a
flanged joint do not have the same pressure–temperature
rating, the rating of the joint at any temperature is the
lower of the two flange ratings at that temperature.
2500
1.9.2 Size. NPS, followed by a dimensionless number, is the designation for nominal flange or flange fitting
size. NPS is related to the reference nominal diameter,
DN, used in international standards. The relationship
is, typically, as follows:
NPS
DN
1
15
20
25
32
40
50
65
80
100
⁄2
⁄4
1
11⁄4
11⁄2
2
21⁄2
3
4
3
2.4 Rating Temperature
The temperature shown for a corresponding pressure
rating is the temperature of the pressure-containing shell
of the component. In general, this temperature is the
same as that of the contained fluid. Use of a pressure
rating corresponding to a temperature other than that
of the contained fluid is the responsibility of the user,
subject to the requirements of applicable codes and regulations. For any temperature below −29°C (−20°F), the
rating shall be no greater than the rating shown for
−29°C (−20°F) (see also paras. 2.5.3 and 5.1.2).
2.5 Temperature Considerations
2.5.1 General. Use of flanged joints at either high
or low temperatures shall take into consideration the
risk of joint leakage due to forces and moments developed in the connected piping or equipment. Provisions
in paras. 2.5.2 and 2.5.3 are included as advisory with
the aim of lessening these risks.
GENERAL NOTE: For NPS ≥ 4, the related DN p 25 multiplied
by the NPS number.
2
PRESSURE–TEMPERATURE RATINGS
2.1 General
2.5.2 High Temperature. Application at temperatures in the creep range will result in decreasing bolt
loads as relaxation of flanges, bolts, and gaskets takes
place. Flanged joints subjected to thermal gradients may
likewise be subject to decreasing bolt loads. Decreased
bolt loads diminish the capacity of the flanged joint to
sustain loads effectively without leakage. At temperatures above 200°C (400°F) for Class 150 and above 400°C
(750°F) for other class designations, flanged joints may
develop leakage problems unless care is taken to avoid
imposing severe external loads, severe thermal gradients, or both.
Pressure–temperature ratings are maximum allowable working gage pressures in bar units at the temperatures in degrees Celsius shown in Tables 2-1.1 through
2-3.19 for the applicable material and class designation.
Tables II-2-1.1 through II-2-3.19 of Mandatory
Appendix II list pressure–temperature ratings using psi
units for pressure at the temperature in degrees
Fahrenheit. For intermediate temperatures, linear interpolation is permitted. Interpolation between class designations is not permitted.
2.2 Flanged Joints
2.5.3 Low Temperature. Some of the materials listed
in Tables 1A and 1B, notably some carbon steels, may
undergo a decrease in ductility when used at low temperatures to such an extent as to be unable to safely
resist shock loading, sudden changes of stress, or high
stress concentration. Some codes or regulations may
require impact testing for applications even where temperatures are higher than −29°C (−20°F). When such
requirements apply, it is the responsibility of the user
to ensure these requirements are communicated to the
manufacturer prior to the time of purchase.
A flanged joint is composed of separate and independent, although interrelated components: the flanges,
gasket, and bolting, which are assembled by another
influence, the assembler. Proper controls must be exercised in the selection and application for all these elements to attain a joint that has acceptable leak tightness.
Special techniques, such as controlled bolt tightening,
are described in ASME PCC-1.
2.3 Ratings of Flanged Joints
2.3.1 Basis. Pressure–temperature ratings apply to
flanged joints that conform to the limitations on bolting
in para. 5.3 and on gaskets in para. 5.4, which are made
up in accordance with good practice for alignment and
assembly (see para. 2.2). Use of these ratings for flanged
2.6 System Hydrostatic Testing
Flanged joints and flanged fittings may be subjected
to system hydrostatic tests at a pressure of 1.5 times the
38°C (100°F) rating rounded off to the next higher 1 bar
2
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
2.8.3 Bore. The bore diameter shall be equal to
B dimension of the welding neck flange. Other bores
may be furnished by agreement between the end user
and manufacturer. In no case shall the bore diameter
exceed the bore of the same size and class lapped flange.
(25 psi) increment. Testing at any higher pressure is
the responsibility of the user, taking into account the
requirements of the applicable code or regulation.
2.7 Welding Neck Flanges
Ratings for welding neck flanges covered by this
Standard are based upon their hubs at the welding end
having thickness at least equal to that calculated for pipe
having 276 MPa (40,000 psi) specified minimum yield
strength.1 In order to ensure adequate flange hub thickness for flange sizes NPS 2 and larger, the bore of a
welding neck flange, dimension B in the various dimensional tables, shall not exceed B max determined as
follows:
冢
Bmax p Ah 1 −
Copc
50,000
2.8.4 Hub End. The standard flange shall be provided with square cut end. The end user may specify
welding end preparation in accordance with para. 6.7.
2.9 Multiple Material Grades
Material for flanges and flanged fittings may meet
the requirements of more than one specification or the
requirements of more than one grade of a specification
listed in Table 1A. In either case, the pressure–
temperature ratings for any of these specifications or
grades may be used provided the material is marked in
accordance with para. 4.2.8.
冣
where
Ah p tabulated hub diameter, beginning of chamfer as listed in the dimensional tables
Bmax p maximum permissible diameter for the bore
of a welding neck flange
Co p 14.5 when pc is expressed in bar units or 1.0
when pc is expressed in psi units
pc p ceiling pressure value at 38°C (100°F),
Tables A-1 and A-2 of Nonmandatory
Appendix A
3
3.1 Nominal Pipe Size
As applied in this Standard, the use of the phrase
“nominal pipe size” or the designation NPS followed
by a dimensionless number is for the purpose of pipe,
flange, or flanged fitting end connection size identification. The number is not necessarily the same as the
flange or flanged fitting inside diameter.
The resultant units for diameter Bmax are the same as
those entered for diameter A.
The tabulated ratings for welding neck flanges are
independent of components to which they may be
attached, and the pressure rating of the flange shall
not be exceeded. Attachment welds should be made in
accordance with the applicable code or regulation. See
para. 6.7 and Figs. 1 through 3 for weld end dimensional
requirements.
(13)
COMPONENT SIZE
3.2 Reducing Fittings
Reducing fittings shall be designated by the NPS for
the openings in the sequence indicated in the sketches
of Fig. 5.
2.8 Straight Hub Welding Flanges
3.3 Reducing Flanges
2.8.1 Hub Dimensions. Straight hub welding
flanges have hubs of uniform thickness (see Fig. 4).
Except as described in paras. 2.8.2, 2.8.3, and 2.8.4, the
straight hub welding flanges shall have dimensions and
tolerances of the welding neck flanges of the same size
and class set forth in Tables 8, 11, 14, 16, 18, 20, and 22
(Tables II-8, II-11, II-14, II-16, II-18, II-20, and II-22 of
Mandatory Appendix II). In Fig. 4 the tolerances
described in para. 7 are applicable.
Reducing flanges shall be designated by the NPS for
each opening. See examples in Note (4) of Table 6
(Table II-6 of Mandatory Appendix II).
2.8.2 Length Through Hub. The length through hub
shall be 229 mm (9 in.) for NPS 4 and smaller and 305 mm
(12 in.) for larger than NPS 4. Other lengths may be
furnished by agreement between the end user and
manufacturer.
Except as modified herein, flanges and flanged fittings
shall be marked as required in MSS SP-25, except as
noted in para. 4.2.
4
MARKING
4.1 General
4.2 Identification Markings
4.2.1 Name. The manufacturer’s name or trademark shall be applied.
1
For flanges to be attached to high strength pipe with large
inside diameters resulting from thin wall sections, see MSS SP-44.
3
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 1A List of Material Specifications
Material
Group
Nominal Designation
Pressure–
Temperature
Rating Table
Applicable ASTM Specifications [Note (1)]
Forgings
Castings
Plates
1.1
C Si
C Mn Si
C Mn Si
C Mn Si V
31⁄2 Ni
2 1.1
2 1.1
2 1.1
2 1.1
2 1.1
A105
A350 Gr. LF2
...
A350 Gr. LF6 CI. 1
A350 Gr. LF3
A216 Gr. WCB
...
...
...
...
A515 Gr. 70
A516 Gr. 70
A537 Cl. 1
...
...
1.2
C Mn Si
C Mn Si
C Mn Si V
21⁄2Ni
31⁄2Ni
2 1.2
2 1.2
2 1.2
2 1.2
2 1.2
...
...
A350 Gr. LF6 Cl. 2
...
...
A216 Gr. WCC
A352 Gr. LCC
...
A352 Gr. LC2
A352 Gr. LC3
...
...
...
A203 Gr. B
A203 Gr. E
1.3
C Si
C Mn Si
21⁄2Ni
31⁄2Ni
C 1⁄2Mo
C 1⁄2Mo
2 1.3
2 1.3
2 1.3
2 1.3
2 1.3
2 1.3
A352 Gr. LCB
...
...
A515
A516
A203
A203
1.4
C Si
C Mn Si
2 1.4
2 1.4
...
A350 Gr. LF1 Cl. 1
...
...
A515 Gr. 60
A516 Gr. 60
1.5
C 1⁄2Mo
C 1⁄2Mo
2 1.5
2 1.5
A182 Gr. F1
...
...
...
A204 Gr. A
A204 Gr. B
1.7
1
⁄2Cr 1⁄2Mo
Ni 1⁄2Cr 1⁄2Mo
3
⁄4Ni 3⁄4Cr 1Mo
2 1.7
2 1.7
2 1.7
A182 Gr. F2
...
...
...
A217 Gr. WC4
A217 Gr. WC5
1.9
11⁄4Cr 1⁄2Mo
11⁄4Cr 1⁄2Mo Si
2 1.9
2 1.9
...
A182 Gr. F11 CL.2
A217 Gr. WC6
...
...
A387 Gr. 11 Cl. 2
1.10
21⁄4Cr 1Mo
2 1.10
A182 Gr. F22 Cl. 3
A 217 Gr. WC9
A387 Gr. 22 Cl. 2
1.11
1
C ⁄2Mo
1
...
...
...
...
...
...
A217 Gr. WC1
A352 Gr. LC1
Gr. 65
Gr. 65
Gr. A
Gr. D
...
...
...
...
...
2 1.11
...
...
A204 Gr. C
1.13
5Cr ⁄2Mo
2 1.13
A182 Gr. F5a
A217 Gr. C5
...
1.14
9Cr 1M0
2 1.14
A182 Gr. F9
A217 Gr. C12
...
1.15
9Cr 1M0 V
A217 Gr. C12A
2 1.15
A182 Gr. F91
1.17
1
1Cr ⁄2Mo
5Cr 1⁄2Mo
2 1.17
2 1.17
A182 Gr. F12 Cl. 2
A182 Gr. F5
...
...
...
...
1.18
9Cr 2W V
2 1.18
A182 Gr. F92
...
...
2.1
18Cr 8Ni
18Cr 8Ni
2 2.1
2 2.1
A182 Gr. F304
A182 Gr. F304H
A351 Gr. CF3
A351 Gr. CF8
A240 Gr. 304
A240 Gr. 304H
2.2
16Cr
16Cr
18Cr
19Cr
2Mo
2Mo
3Mo
3Mo
2 2.2
2 2.2
2 2.2
2 2.2
A182 Gr. F316
A182 Gr. F316H
A182 Gr. F317
...
A351 Gr. CF3M
A351 Gr. CF8M
...
A351 Gr. CG8M
A240 Gr. 316
A240 Gr. 316H
A240 Gr. 317
...
2.3
18Cr 8Ni
16Cr 12Ni 2Mo
18Cr 13Ni 3Mo
2 2.3
2 2.3
2 2.3
A182 Gr. F304L
A182 Gr. F316L
A182 Gr. F317L
12Ni
12Ni
13Ni
10Ni
...
...
...
4
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
A387 Gr. 91 Cl. 2
A240 Gr. 304L
A240 Gr. 316L
...
ASME B16.5-2013
Table 1A List of Material Specifications (Cont’d)
Material
Group
Nominal Designation
Pressure–
Temperature
Rating Table
Applicable ASTM Specifications [Note (1)]
Forgings
Castings
Plates
2.4
18Cr 10Ni Ti
18Cr 10Ni Ti
2 2.4
2 2.4
A182 Gr. F321
A182 Gr. F321H
...
...
A240 Gr. 321
A240 Gr. 321H
2.5
18Cr
18Cr
18Cr
18Cr
2 2.5
2 2.5
2 2.5
2 2.5
A182
A182
A182
A182
F347
F347H
F348
F348H
...
...
...
...
A240
A240
A240
A240
2.6
23Cr 12Ni
2 2.6
...
...
A240 Gr. 309H
2.7
25Cr 20Ni
2 2.7
A182 Gr. F310
...
A240 Gr. 310H
2.8
20Cr
22Cr
25Cr
24Cr
25Cr
25Cr
25Cr
2 2.8
2 2.8
2 2.8
2 2.8
2 2.8
2 2.8
2 2.8
A182 Gr. F44
A182 Gr. F51
A182 Gr. F53
...
...
...
A182 Gr. F55
A 351 Gr. CK3MCuN
...
...
A351 Gr. CE8MN
A995 Gr. CD4MCu
A995 Gr. CD3MWCuN
...
2.9
23Cr 12Ni
25Cr 12Ni
2 2.9
2 2.9
...
...
2.10
25Cr 12Ni
25Cr 12Ni
2 2.10
2 2.10
...
...
A351 Gr. CH8
A351 Gr. CH20
...
...
2.11
18Cr 10Ni Cb
2 2.11
...
A351 Gr. CF8C
...
2.12
25Cr 20Ni
2 2.12
...
A351 Gr. CK20
...
3.1
35Ni 35Fe 20Cr Cb
2 3.1
B462 Gr. N08020
...
B463 Gr. N08020
3.2
99.0Ni
2 3.2
B564 Gr. N02200
...
B162 Gr. N02200
3.3
99.0Ni Low C
2 3.3
...
...
B162 Gr. N02201
3.4
67Ni 30Cu
2 3.4
B564 Gr. N04400
...
B127 Gr. N04400
3.5
72Ni 15Cr 8Fe
2 3.5
B564 Gr. N06600
...
B168 Gr. N06600
3.6
33Ni 42Fe 21Cr
2 3.6
B564 Gr. N08800
...
B409 Gr. N08800
3.7
65Ni 28Mo 2Fe
64Ni 29.5Mo 2Cr 2Fe Mn W
2 3.7
2 3.7
B462 Gr. N10665
B462 Gr. N10675
...
...
B333 Gr. N10665
B333 Gr. N10675
3.8
54Ni
60Ni
62Ni
70Ni
61Ni
42Ni
55Ni
55Ni
2 3.8
2 3.8
2 3.8
2 3.8
2 3.8
2 3.8
2 3.8
2 3.8
B462 Gr. N10276
B564 Gr. N06625
...
...
...
B564 Gr. N08825
B462 Gr. N06022
B462 Gr. N06200
...
...
...
...
...
...
...
...
B575
B443
B333
B434
B575
B424
B575
B575
3.9
47Ni 22Cr 9Mo I8Fe
21Ni 30Fe 22Cr 18Co 3Mo 3W
2 3.9
2 3.9
...
B572 Gr. R30556
...
...
B435 Gr. N06002
B435 Gr. R30556
3.10
25Ni 47Fe 21Cr 5Mo
2 3.10
...
...
B599 Gr. N08700
10Ni
10Ni
10Ni
10Ni
Cb
Cb
Cb
Cb
18Ni 6Mo
5Ni 3Mo N
7Ni 4Mo N
10Ni 4Mo V
5Ni 2Mo 3Cu
7Ni 3.5Mo W Cb
7.5Ni 3.5Mo N Cu W
16Mo 15Cr
22Cr 9Mo 3.5Cb
28Mo 5Fe
16Mo 7Cr 5Fe
16Mo 16Cr
21.5Cr 3Mo 2.3Cu
21Cr 13.5Mo
23Cr 16Mo 1.6Cu
Gr.
Gr.
Gr.
Gr.
...
...
5
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Gr.
Gr.
Gr.
Gr.
347
347H
348
348H
A240 Gr. S31254
A240 Gr. S31803
A240 Gr. S32750
...
...
...
A240 Gr. S32760
A240 Gr. 309S
A240 Gr. 310S
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N10276
N06625
N10001
N10003
N06455
N08825
N06022
N06200
ASME B16.5-2013
Table 1A List of Material Specifications (Cont’d)
Material
Group
Nominal Designation
Pressure–
Temperature
Rating Table
Applicable ASTM Specifications [Note (1)]
Forgings
Castings
...
Plates
3.11
44Fe 25Ni 21Cr Mo
2 3.11
A479 Gr. N08904
3.12
26Ni 43Fe 22Cr 5Mo
47Ni 22Cr 20Fe 7Mo
46Fe 24Ni 21Cr 6Mo Cu N
2 3.12
2 3.12
2 3.12
...
...
B462 Gr. N08367
3.13
49Ni 25Cr 18Fe 6Mo
Ni Fe Cr Mo Cu Low C
2 3.13
2 3.13
...
B564 Gr. N08031
...
...
B582 Gr. N06975
B625 Gr. N08031
3.14
47Ni 22Cr 19Fe 6Mo
40Ni 29Cr 15Fe 5Mo
58Ni 33Cr 8Mo
2 3.14
2 3.14
2 3.14
...
B462 Gr. N06030
B462 Gr. N06035
...
...
...
B582 Gr. N06007
B582 Gr. N06030
B575 Gr. N06035
3.15
42Ni 42Fe 21Cr
...
...
A351 Gr. CN3MN
A240 Gr. N08904
B620 Gr. N08320
B582 Gr. N06985
B688 Gr. N08367
2 3.15
B564 Gr. N08810
...
B409 Gr. N08810
3.16
1
35Ni 19Cr 1 ⁄4Si
2 3.16
B511 Gr. N08330
...
B536 Gr. N08330
3.17
29Ni 20.5Cr 3.5Cu 2.5Mo
2 3.17
3.19
57Ni 22CR 14W 2Mo La
2 3.19
...
B564 Gr. N06230
A351 Gr. CN7M
...
...
B435 Gr. N06230
GENERAL NOTES:
(a) For temperature limitations, see notes in Tables II 2 1.1 through II 2 3.17 of Mandatory Appendix II.
(b) Plate materials are listed only for use as blind flanges and reducing flanges without hubs (see para. 5.1). Additional plate materials
listed in ASME B16.34 may also be used with corresponding B16.34, Standard Class ratings.
NOTE:
(1) ASME Boiler and Pressure Vessel Code, Section II materials may also be used, provided the requirements of the ASME specification are
identical to or more stringent than the corresponding ASTM specification for the Grade, Class, or Type listed.
4.2.2 Material. Material shall be identified in the
following way:
(a) Cast flanges and flanged fittings shall be marked
with the ASTM specification,2 grade identification symbol (letters and numbers), and the melt number or melt
identification.
(b) Plate flanges, forged flanges, and flanged fittings
shall be marked with the ASTM specification number
and grade identification symbol.2
(c) A manufacturer may supplement these mandatory
material indications with his trade designation for the
material grade, but confusion of symbols shall be
avoided.
(d) For flanges and flanged fittings manufactured
from material that meets the requirements of more than
one specification or grade of a specification listed in
Table 1A, see para. 4.2.8.
4.2.4 Conformance. The designation B16 or B16.5
shall be applied to the flange or flanged fitting, preferably located adjacent to the class designation, to indicate
conformance to this Standard. The use of the prefix
ASME is optional.
4.2.5 Temperature. Temperature markings are not
required on flanges or flanged fittings; however, if
marked, the temperature shall be shown with its corresponding tabulated pressure rating for the material.
4.2.6 Size. The NPS designation shall be marked
on flanges and flanged fittings. Reducing flanges and
reducing flanged fittings shall be marked with the applicable NPS designations as required by paras. 3.2 and 3.3.
4.2.7 Ring Joint Flanges. The edge (periphery) of
each ring joint flange shall be marked with the letter R
and the corresponding ring groove number.
4.2.3 Rating Designation. The flange or flanged fitting shall be marked with the number that corresponds
to its pressure rating class designation (i.e., 150, 300,
400, 600, 900, 1500, or 2500).
4.2.8 Multiple Material Marking. Material for components that meet the requirements for more than one
specification or grade of a specification listed in Table 1A
may, at the manufacturer’s option, be marked with more
than one of the applicable specification or grade symbols. These identification markings shall be placed so
as to avoid confusion in identification. The multiple
marking shall be in accordance with the guidelines set
2
An ASME Boiler and Pressure Vessel Code, Section II specification number may be substituted for an ASTM specification number
provided the requirements of the ASME specification are identical
to or more stringent than the ASTM specification for the Grade,
Class, or Type of material.
6
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
5.2 Mechanical Properties
out in ASME Boiler and Pressure Vessel Code, Section II,
Part D, Appendix 7.
5
(13)
Mechanical properties shall be obtained from test
specimens that represent the final heat-treated condition
of the material required by the material specification.
MATERIALS
5.1 General
5.3 Bolting
(a) Materials required for flanges and flanged fittings
are listed in Table 1A with the restriction that plate
materials shall be used only for blind flanges and reducing flanges without hubs. Flanges and flanged fittings
shall be manufactured as one piece in accordance with
the applicable material specification. Assembly of multiple pieces into the finished product by welding or other
means is not permitted by this Standard.
(b) Recommended bolting materials are listed in
Table 1B (see para. 5.3).
(c) Corresponding materials listed in Section II of the
ASME Boiler and Pressure Vessel Code may be used
provided that the requirements of the ASME specification are identical to or more stringent than the ASTM
specification for the Grade, Class, or type of material.
5.3.1 General. Bolting listed in Table 1B is recommended for use in flanged joints covered by this
Standard. Bolting of other material may be used if permitted by the applicable code or government regulation.
Bolting materials are subject to the limitations given in
paras. 5.3.2 through 5.3.5.
5.3.2 High-Strength Bolting. Bolting materials having allowable stresses not less than those for ASTM A193
Grade B7 are listed as high strength in Table 1B. These
and other materials of comparable strength may be used
in any flanged joint.
5.3.3 Intermediate Strength Bolting. Bolting materials listed as intermediate strength in Table 1B, and
other bolting of comparable strength, may be used in
any flanged joint provided the user verifies their ability
to seat the selected gasket and maintain a sealed joint
under expected operating conditions.
5.1.1 Application. Criteria for the selection of materials are not within the scope of this Standard. The possibility of material deterioration in service should be
considered by the user. Carbide phase conversion to
graphite and excessive oxidation of ferritic materials,
susceptibility to intergranular corrosion of austenitic
materials, or grain boundary attack of nickel base alloys
are among those items requiring attention. A discussion
of precautionary considerations can be found in
ASME B31.3, Appendix F; Section II, Part D,
Appendix A; and Section III, Division 1, Appendix W
of the ASME Boiler and Pressure Vessel Code.
5.3.4 Low-Strength Bolting. Bolting materials having no more than 206 MPa (30 ksi) specified minimum
yield strength are listed as low strength in Table 1B.
These materials and others of comparable strength are
to be used only in Class 150 and 300 flanged joints
and only with gaskets described in para. 5.4.2. Flanged
assemblies using low-strength carbon steel bolts should
not be used above 200°C (400°F) or below −29°C (−20°F).
5.3.5 Bolting to Gray Cast Iron Flanges. The following recommendations are made in recognition of the
low ductility of gray cast iron:
(a) Alignment of flange faces is essential, along with
control of assembly bolt torque, so as not to overstress
the cast iron flanges. Care must also be exercised to
ensure that piping loads transmitted to cast iron flanges
are controlled, taking into account its lack of ductility
and recognizing that cast iron flanges should not be used
where suddenly applied loads such as rapid pressure
fluctuation may occur.
(b) Where Class 150 steel flanges are bolted to
Class 125 cast iron flanges, the gaskets should be made
of Nonmandatory Appendix B, Table B-1, Group No. Ia
materials, the steel flanges should have flat faces, and
(1) low-strength bolting within the limitations of
para. 5.3.4 should be used with ring gaskets extending
to the bolt holes or
(2) bolting of low (para. 5.3.4), intermediate (para.
5.3.3), or high (para. 5.3.2) strength may be used with
full face gaskets extending to the outside diameters of
the flanges
5.1.2 Toughness. Some of the materials listed in
Table 1A undergo a decrease in toughness when used
at low temperatures, to the extent that Codes referencing
the Standard may require impact tests for application
even at temperatures higher than −7°C (+20°F). It is the
responsibility of the user to ensure that such testing is
performed.
5.1.3 Responsibility. When service conditions dictate the implementation of special material requirements
[e.g., using a Group 2 material above 538°C (1,000°F)],
it is the user’s responsibility to so specify to the manufacturer in order to ensure compliance with metallurgical
requirements listed in the notes in Tables 2-1.1 through
2-3.19 (Tables II-2-1.1 through II-2-3.19 of Mandatory
Appendix II).
5.1.4 Cast Surfaces. Cast surfaces of component
pressure boundaries shall be in accordance with
MSS SP-55, except that all Type I defects are unacceptable, and defects in excess of Plates “a” and “b” for
Type II through Type XII are unacceptable.
7
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 1B List of Bolting Specifications
Applicable ASTM Specifications
Bolting Materials [Note (1)]
High Strength
[Note (2)]
Intermediate Strength
[Note (3)]
Spec.
No.
Grade
Notes
A193
A193
A193
A320
A320
A320
B7
B16
B16
L7
L7A
L7B
...
...
...
(10)
(10)
(10)
A320
A320
L7C
L43
(10)
(10)
A354
A354
BC
BD
...
...
A540
A540
A540
A540
B21
B22
B23
B24
...
...
...
...
Spec.
No.
Grade
Low Strength
[Note (4)]
Notes
Spec.
No.
Grade
Nickel and Special Alloy
[Note (5)]
Notes
Spec.
No.
Grade
Notes
A193
A193
A193
A193
B5
B6
B6X
B7M
...
...
...
...
A193
A193
A193
A193
B8 Cl.1
B8C Cl.1
B8M Cl.1
B8T Cl.1
(6)
(6)
(6)
(6)
B164
...
B166
...
...
...
...
...
A193
B8 Cl.2
(11)
A193
B8A
(6)
B335
N10665
N10675
A193
A193
A193
A193
A193
B8 Cl.2B
B8C Cl.2
B8M Cl.2
B8M Cl.2B
B8T Cl.2
(11)
(11)
(11)
(11)
(11)
A193
A193
B8CA
B8MA
...
...
B408
...
(7) (9)
A193
B8TA
(6)
B473
...
(7)
A320
A320
A320
A320
A320
B8 Cl.2
B8C Cl.2
B8F Cl.2
B8M Cl.2
B8T Cl.2
(11)
(11)
(11)
(11)
(11)
A307
B
(12)
B574
...
(7)
A320
A320
A320
A320
B8 Cl.1
B8C Cl.1
B8M Cl.1
B8T Cl.1
(6)
(6)
(6)
(6)
A449
A453
A453
(7) (9)
...
(7) (9)
...
(7)
(7)
(13)
651
660
(14)
(14)
GENERAL NOTES:
(a) Bolting material shall not be used beyond temperature limits specified in the governing code.
(b) ASME Boiler and Pressure Vessel Code, Section II materials may also be used, provided the requirements of the ASME specification are
identical or more stringent than the corresponding ASTM specification for the Grade, Class, or Type listed.
NOTES:
(1) Repair welding of bolting material is prohibited.
(2) These bolting materials may be used with all listed materials and gaskets.
(3) These bolting materials may be used with all listed materials and gaskets, provided it has been verified that a sealed joint can be
maintained under rated working pressure and temperature.
(4) These bolting materials may be used with all listed materials but are limited to Class 150 and Class 300 joints. See para. 5.3.4 for
recommended gasket practices.
(5) These materials may be used as bolting with comparable nickel and special alloy parts.
(6) This austenitic stainless material has been carbide solution treated but not strain hardened. Use A194 nuts of corresponding
material.
(7) Nuts may be machined from the same material or of a compatible grade of ASTM A194.
(8) Maximum operating temperature is arbitrarily set at 260°C (500°F), unless the material has been annealed, solution annealed, or hot
finished, because hard temper adversely affects design stress in the creep rupture range.
(9) Forging quality is not permitted unless the producer last heating or working these parts tests them as required for other permitted
conditions in the same specification and certifies their final tensile, yield, and elongation properties to equal or exceed the require
ments for one of the other permitted conditions.
(10) This ferritic material is intended for low temperature service. Use A194 Gr. 4 or Gr. 7 nuts.
(11) This austenitic stainless material has been carbide solution treated and strain hardened. Use A194 nuts of corresponding material.
(12) This carbon steel fastener shall not be used above 200°C (400°F) or below 29°C ( 20°F) [see also Note (4)]. Bolts with drilled or
undersized heads shall not be used.
(13) Acceptable nuts for use with quenched and tempered bolts are A194 Gr. 2 or Gr. 2H. Mechanical property requirements for studs
shall be the same as those for bolts.
(14) This special alloy is intended for high temperature service with austenitic stainless steel.
8
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
0.35 冪dtm, where d is the tabulated fitting inside diameter, and tm is the minimum wall thickness as shown in
the tables listed in para. 6.1.1.
(b) Measured thickness is not less than 0.75tm.
(c) Enclosure circles are separated from each other by
an edge-to-edge distance of more than 1.75 冪dtm.
(c) Where Class 300 steel flanges are bolted to
Class 250 cast iron flanges, the gaskets should be made
of Nonmandatory Appendix B, Table B-1, Group No. Ia
materials
(1) low-strength bolting within the limitations of
para. 5.3.4 should be used with gaskets extending to the
bolt holes and with the flanges having either raised or
flat faces or
(2) bolting of low (para. 5.3.4), intermediate (para.
5.3.3), or high (para. 5.3.2) strength may be used with
full face gaskets extending to the outside diameters of
the flanges and with both the Class 300 steel and
Class 250 cast iron flanges having flat faces
6.2 Fitting Center-to-Contact Surface and Center-toEnd
6.2.1 Design. A principle of design in this Standard
is to maintain a fixed position for the flange edge with
reference to the body of the fitting. In case of raised face
flanged fittings, the outside edge of the flange includes
the raised face (see para. 6.4).
5.4 Gaskets
6.2.2 Standard Fittings. Center-to-contact surface,
center-to-flange edge, and center-to end (ring joint)
dimensions are shown in Tables 9 and 12 (Tables II-9
and II-12 of Mandatory Appendix II).
5.4.1 General. Ring joint gasket materials shall conform to ASME B16.20. Materials for other gaskets are
described in Nonmandatory Appendix B. The user is
responsible for selection of gasket materials that will
withstand the expected bolt loading without injurious
crushing and that are suitable for the service conditions.
Particular attention should be given to gasket selection
if a system hydrostatic test approaches or exceeds the
test pressure specified in para. 2.6.
6.2.3 Reducing Fittings. Center-to-contact surface
or center-to-flange edge dimensions for all openings
shall be the same as those of straight size fittings of the
largest opening. The contact surface-to-contact surface
or flange edge-to-flange edge dimensions for all combinations of reducers and eccentric reducers shall be as
listed for the larger opening.
5.4.2 Gaskets for Low-Strength Bolting. If bolting
listed as low strength in Table 1B is used, gaskets shown
in Nonmandatory Appendix B, Table B-1, Group No. Ia
are recommended.
6.2.4 Side Outlet Fittings. Side outlet elbows, tees,
and crosses shall have all openings on intersecting centerlines, and the center-to-contact surface dimensions of
the side outlet shall be the same as for the largest opening. Long radius elbows with one side outlet shall have
the side outlet on the radial centerline of the elbow, and
the center-to-contact surface dimension of the side outlet
shall be the same as for the regular 90-deg elbow of the
largest opening.
5.4.3 Gaskets for Class 150 Flanged Joints. It is
recommended that only Nonmandatory Appendix B,
Table B-1, Group No. I gaskets be used for Class 150
flanged joints. When the ring joint or spiral wound gasket is selected, it is recommended that line flanges be
of the welding neck or lapped joint type.
6
DIMENSIONS
6.2.5 Special Degree Elbows. Special degree elbows
ranging from 1 deg to 45 deg, inclusive, shall have the
same center-to-contact surface dimensions as 45-deg
elbows, and those over 45 deg and up to 90 deg, inclusive, shall have the same center-to-contact surface
dimensions as 90-deg elbows. The angle designation of
an elbow is its deflection from straight line flow and is
also the angle between the flange faces.
6.1 Flanged Fittings Wall Thickness
6.1.1 Minimum Wall Thickness. For inspection purposes, the minimum wall thickness, tm, of flanged fittings
at the time of manufacture shall be as shown in Tables 9
and 12 (Tables II-9 and II-12 of Mandatory Appendix II),
except as provided in para. 6.1.2. The additional metal
thickness needed to withstand installation bolt-up
assembly stresses, shapes other than circular, and stress
concentrations must be determined by the manufacturer,
since these factors vary widely. In particular, 45-deg
laterals, true Ys, and crosses may require additional reinforcement to compensate for inherent weaknesses in
these shapes.
6.3 Flat Face Flanges
6.3.1 General. This Standard permits flat face
flanges in all classes.
6.3.2 Conversion. A raised face may be removed
from a raised face flange to convert it to a flat face flange,
provided that the required dimension, tf, shown in Fig. 6
(Fig. II-6 of Mandatory Appendix II) is maintained.
6.1.2 Fitting Local Areas. Local areas having less
than minimum wall thickness are acceptable, provided
that all of the following conditions are satisfied:
(a) The area of subminimum thickness can be
enclosed by a circle whose diameter is no greater than
6.3.3 Facing. The flat face flange facing finish shall
be in conformance with para. 6.4.5 for the full width of
the seating surface for the gasket.
9
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
6.4 Flange Facings
6.4.3.5 Lap Joint Facing Outside Diameters. The
outside diameters of the lap for ring joints are shown
in Table 5 (Table II-5 of Mandatory Appendix II), dimension K. The outside diameters of laps for large female,
large tongue and groove, and small tongue and groove
are shown in Table 4 (Table II-4 of Mandatory
Appendix II). Small male and female facings for lapped
joints are not covered by this Standard.
6.4.1 General. Figure 6 (Fig. II-6 of Mandatory
Appendix II) shows dimensional relationships for various flange types and pipe lap facings to be used with
lap joints. Table 4 (Table II-4 of Mandatory Appendix II)
lists dimensions for facings other than ring joint. Table 5
(Table II-5 of Mandatory Appendix II) lists dimensions
for ring joint facings. Classes 150 and 300 pipe flanges
and companion flanges of fittings are regularly furnished with 2 mm (0.06 in.) raised face, which is in addition to the minimum flange thickness, tf. Classes 400,
600, 900, 1500, and 2500 pipe flanges and companion
flanges of fittings are regularly furnished with 7 mm
(0.25 in.) raised face, which is in addition to the minimum flange thickness, tf.
6.4.4 Blind Flanges. Blind flanges need not be faced
in the center if, when this center part is raised, its diameter is at least 25 mm (1 in.) smaller than the inside
diameter of fittings of the corresponding pressure class,
as given in Tables 9 and 12 (Tables II-9 and II-12) or
25 mm (1 in.) smaller than the mating pipe inside diameter. When the center part is depressed, its diameter shall
not be greater than the inside diameter of the corresponding pressure class fittings, as given in Tables 9 and
12 (Tables II-9 and II-12 of Mandatory Appendix II).
Machining of the depressed center is not required.
6.4.2 Other Than Lapped Joints. For joints other
than lapped joints, the requirements of paras. 6.4.2.1 and
6.4.2.2 shall apply.
6.4.2.1 Raised Face and Tongue Face. In the case
of flanges having raised face, tongue, or male face, the
minimum flange thickness, tf, shall be provided, and
then the raised face, tongue, or male face shall be added
thereto.
6.4.5 Flange Facing Finish. Flange facing finishes
shall be in accordance with paras. 6.4.5.1 through 6.4.5.3,
except that other finishes may be furnished by
agreement between the user and the manufacturer. The
finish of the gasket contact faces shall be judged by
visual comparison with Ra standards (see ASME B46.1)
and not by instruments having stylus tracers and electronic amplification.
6.4.2.2 Grooves. For flanges that have a ring joint,
groove, or female face, the minimum flange thickness
shall first be provided and then sufficient thickness
added thereto so that the bottom of the ring joint groove,
or the contact face of the groove or female face, is in the
same plane as the flange edge of a full thickness flange.
6.4.5.1 Tongue and Groove and Small Male and
Female. The gasket contact surface finish shall not
exceed 3.2 m (125 in.) roughness.
6.4.3 Lapped Joint Flanges. Lapped joint flanges
shall be furnished with flat faces as illustrated in
Tables 8, 11, 14, 16, 18, 20, and 22 (Tables II-8, II-11, II-14,
II-16, II-18, II-20, and II-22 of Mandatory Appendix II).
Lap joint stub ends shall be in accordance with Fig. 6
(Fig. II-6 of Mandatory Appendix II) and paras. 6.4.3.1
through 6.4.3.3.
6.4.5.2 Ring Joint. The side wall surface finish of
the gasket groove shall not exceed 1.6 m (63 in.)
roughness.
6.4.5.3 Other Flange Facings. Either a serrated
concentric or serrated spiral finish having a resultant
surface finish from 3.2 m to 6.3 m (125 in. to 250 in.)
average roughness shall be furnished. The cutting tool
employed should have an approximate 1.5 mm (0.06 in.)
or larger radius, and there should be from 1.8 grooves/
mm through 2.2 grooves/mm (45 grooves/in. through
55 grooves/in.).
6.4.3.1 Raised Face. The finished thickness of the
lap shall be no less than nominal pipe wall thickness.
6.4.3.2 Large Male and Female. The finished
height of the male face shall be the greater of the wall
thickness of the pipe used or 7 mm (0.25 in.). The thickness of lap that remains after machining the female face
shall be no less than the nominal wall thickness of
pipe used.
6.4.6 Flange Facing Finish Imperfections. Imperfections in the flange facing finish shall not exceed the
dimensions shown in Table 3 (Table II-3 of Mandatory
Appendix II). A distance of at least four times the maximum radial projection shall separate adjacent imperfections. A radial projection shall be measured by the
difference between an outer radius and inner radius
encompassing the imperfection where the radii are
struck from the centerline of the bore. Imperfections
less than half the depth of the serrations shall not be
considered cause for rejection. Protrusions above the
serrations are not permitted.
6.4.3.3 Tongue and Groove. The thickness of the
lap remaining after machining the tongue or groove face
shall be no less than the nominal wall thickness of the
pipe used.
6.4.3.4 Ring Joint. The thickness of the lap
remaining after machining the ring groove shall be no
less than the nominal wall thickness of pipe used.
10
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
ASME B16.5-2013
6.5 Flange Bolt Holes
Bolt holes are in multiples of four. Bolt holes shall be
equally spaced, and pairs of bolt holes shall straddle
fitting centerlines.
Appendix II), threaded flanges shall have a taper pipe
thread conforming to ASME B1.20.1. The thread shall
be concentric with the axis of the flange opening, and
variations in alignment (perpendicularity with reference
to the flange face) shall not exceed 5 mm/m (0.06 in./ft).
6.6 Bolting Bearing Surfaces
Flanges and flanged fittings shall have bearing surfaces for bolting that are parallel to the flange face within
1 deg. Any back facing or spot facing shall not reduce
the flange thickness, tf, below the dimensions given in
Tables 8, 9, 11, 12, 14, 16, 18, 20, and 22 (Tables II-8, II-9,
II-11, II-12, II-14, II-16, II-18, II-20, and II-22 of Mandatory
Appendix II). Spot facing or back facing shall be in
accordance with MSS SP-9.
6.9.2 Threads for Class 150 Flanges. Class 150
flanges are made without a counterbore. The threads
shall be chamfered approximately to the major diameter
of the thread at the back of the flange at an angle of
approximately 45 deg with the axis of the thread. The
chamfer shall be concentric with the thread and shall
be included in the measurement of the thread length.
6.9.3 Threads for Class 300 and Higher Flanges.
Class 300 and higher pressure class flanges shall be made
with a counterbore at the back of the flange. The threads
shall be chamfered to the diameter of the counterbore
at an angle of approximately 45 deg with the axis of the
threads. The counterbore and chamfer shall be concentric with the thread.
6.7 Welding End Preparation for Welding Neck
Flanges
6.7.1 Illustrations. Welding ends are illustrated in
Figs. 7 through 10 (Figs. II-7 through II-10 of Mandatory
Appendix II) and Figs. 1 through 3.
6.9.4 Reducing Flange Thread Length. The minimum length of effective thread in reducing flanges shall
be at least equal to dimension T of the corresponding
class of threaded flange as shown in Tables 8, 9, 11, 12,
14, 16, 18, 20, and 22 (Tables II-8, II-9, II-11, II-12, II-14,
II-16, II-18, II-20, and II-22 of Mandatory Appendix II).
Threads do not necessarily extend to the face of the
flange. See Table 6 (Table II-6 of Mandatory Appendix II)
for reducing threaded flanges.
6.7.2 Contours. The contours of the outside of the
welding neck beyond the welding groove are shown in
Figs. 7 and 8 (Figs. II-7 and II-8 of Mandatory
Appendix II) and Figs. 1 and 3.
6.7.3 Bores. Straight-through bores shown in Figs. 7
and 8 (Figs. II-7 and II-8 of Mandatory Appendix II) are
standard unless specifically ordered to suit the special
conditions illustrated in Figs. 9 and 10 (Figs. II-9 and
II-10 of Mandatory Appendix II) and Figs. 2 and 3.
6.9.5 Thread Gaging. The gaging notch of the working gage shall come flush with the bottom of the chamfer
in all threaded flanges and shall be considered as being
the intersection of the chamfer cone and the pitch cone
of the thread. This depth of chamfer is approximately
equal to one-half the pitch of the thread. The maximum
allowable thread variation is one turn large or small
from the gaging notch.
6.7.4 Other Welding Ends. Other welding end preparations furnished by an agreement of the purchaser
and manufacturer do not invalidate compliance with
this Standard.
6.8 Reducing Flanges
6.8.1 Drilling, Outside Diameter, Thickness, and
Facing Dimensions. Flange drilling, outside diameter,
thickness, and facing are the same as those of the standard flange of the size from which the reduction is being
made.
6.9.6 Assembly Using Power Equipment. For
ASME B1.20.1 external pipe threads, Annex A specifies
the distance and number of turns that external pipe
threads may be made longer than regular for use with
the higher pressure flanges to bring the small end of the
thread close to the face of the flange when the parts are
assembled by power equipment.
6.8.2 Hub Dimensions
6.8.2.1 Threaded, Socket Weld, and Slip-On
Flanges. The hub dimension shall be at least as large
as those of the standard flange of the size to which
the reduction is being made. The hub may be larger or
omitted as detailed in Table 6 (Table II-6 of Mandatory
Appendix II).
6.10 Flange Bolting Dimensions
6.10.1 Dimensional Standards. Stud bolts, threaded
at both ends or threaded full length, or bolts may be
used in flange joints. Dimensional recommendations for
bolts, stud bolts, and nuts are shown in Table 1C. See
para. 5.3 for bolting material recommendations.
6.8.2.2 Welding Neck Flanges. The hub dimensions shall be the same as those of the standard flange
of the size to which the reduction is being made.
6.10.2 Bolt Lengths. Stud bolt lengths, including
the height of two heavy hexagon nuts, are shown as
dimension L in Tables 7, 10, 13, 15, 17, 19, and 21
(Tables II-7, II-10, II-13, II-15, II-17, II-19, and II-21 of
6.9 Threaded Flanges
6.9.1 Thread Dimensions. Except as provided in
Notes (4) and (5) of Table 4 (Table II-4 of Mandatory
11
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 1C Flange Bolting Dimensional Recommendations
(13)
Product
Carbon Steel [Note (1)]
Alloy Steel
Stud bolts
ASME B18.2.1
ASME B18.2.1
Bolts smaller than 3⁄4 in.
ASME B18.2.1, square or heavy
hex head
ASME B18.2.1, heavy hex head
Bolts equal to or larger than 3⁄4 in.
ASME B18.2.1, square or heavy
hex head
ASME B18.2.1, heavy hex head
Nuts smaller than 3⁄4 in.
ASME B18.2.2, heavy hex
ASME B18.2.2, heavy hex
Nuts equal to or larger than 3⁄4 in.
ASME B18.2.2, hex or heavy hex
ASME B18.2.2, heavy hex
External threads
ASME B1.1, Cl. 2A coarse series
ASME B1.1, Cl. 2A coarse series
up through 1 in.; eight thread
series for larger bolts
Internal threads
ASME B1.1, Cl. 2B coarse series
ASME B1.1, Cl. 2B coarse series
up through 1 in.; eight thread
series for larger bolts
NOTE:
(1) When B18.2.1 bolting is used, it should be threaded as close to the head as applicable to continuous and double end stud bolts.
6.12 Auxiliary Connections
Mandatory Appendix II). The tabulated stud bolt length
L does not include the height of end points. An end
point is defined as an unthreaded length, such as a
chamfer, which extends beyond the thread. The method
of calculating bolt lengths is explained in
Nonmandatory Appendix C. The tabulated bolt lengths
are reference dimensions. Users may select other bolting
lengths.
6.12.1 General. Auxiliary connections or openings
for flanged fittings are not required unless specified by
the purchaser. Welding to attach auxiliary connections
to flanged fittings shall be made by a qualified welder
using a qualified weld procedure in accordance with
Section IX of the ASME Boiler and Pressure Vessel Code.
6.12.2 Pipe Thread Tapping. Holes may be tapped
in the wall of a fitting if the metal is thick enough to
allow the effective thread length specified in Fig. 11
(Fig. II-11 of Mandatory Appendix II). Where thread
length is insufficient or the tapped hole needs reinforcement, a boss shall be added.
6.10.3 Bolting Recommendations. For flange joints,
stud bolts with a nut at each end are recommended
for all applications and especially for high temperature
service.
6.11 Gaskets for Line Flanges
6.12.3 Sockets. Sockets for socket welding connections may be provided in the wall of a fitting if the
metal is thick enough to afford the depth of socket and
retaining wall specified in Fig. 12 (Fig. II-12 of
Mandatory Appendix II). Where the wall thickness is
insufficient, or the size of the connection requires opening reinforcement, a boss shall be added [see Fig. 13
(Fig. II-13 of Mandatory Appendix II)].
6.11.1 Ring Joint. Ring joint gasket dimensions shall
conform to ASME B16.20.
6.11.2 Contact Width. For flanges having large or
small tongue-and-groove faces, all gaskets, except solid
flat metal gaskets, shall cover the bottom of the groove
with minimum clearance. [See para. 7.3(a) for tolerance
applicable to groove.] Solid flat metal gaskets shall have
contact width not greater than for Nonmandatory
Appendix B, Group III gaskets.
6.12.4 Butt Welding. Connections may be attached
by butt welding directly to the wall of the fitting [see
Fig. 14 (Fig. II-14 of Mandatory Appendix II)]. Where
the size of an opening requires reinforcement, a boss
shall be added.
6.11.3 Bearing Surface. For flanges with small
male-and-female face, care must be taken to ensure that
adequate bearing surface is provided for the gaskets. In
particular, care is necessary when the joint is made on
the end of the pipe as shown in Fig. 6 (Fig. II-6 of
Mandatory Appendix II).
6.12.5 Bosses. Where bosses are required, the
diameters shall be no less than those shown in Fig. 13
12
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
7.3 Facings
(Fig. II-13 of Mandatory Appendix II), and the height
shall provide lengths as specified in Fig. 11 or 12
(Fig. II-11 or II-12 of Mandatory Appendix II).
Tolerances that apply to both flange and flanged fitting facings are as follows:
(a) Inside and outside diameter of large and small
tongue and groove and female, ±0.5 mm (±0.02 in.).
(b) Outside diameter, 2.0 mm (0.06 in.) raised face,
±1.0 mm (±0.03 in.).
(c) Outside diameter, 7.0 mm (0.25 in.) raised face,
±0.5 mm (±0.02 in.).
(d) Ring joint groove tolerances are shown in Table 5
(Table II-5 of Mandatory Appendix II).
Tolerances that apply to flanges are as follows:
(e) Perpendicularity of the face with the bore
6.12.6 Size. Unless otherwise specified, auxiliary
connections shall be of the pipe sizes given below.
Connection
Size (NPS)
Fitting Size
1
2 ≤ NPS ≤ 4
5 ≤ NPS ≤ 8
NPS ≥ 10
⁄2
⁄4
1
3
6.12.7 Designating Locations. The designation of
locations for auxiliary connections for flanged fittings
is shown in Fig. 15. A letter is used to designate each
location.
7
(13)
TOLERANCES
Size
Tolerance
NPS ≤ 5
NPS ≥ 6
1 deg
0.5 deg
7.4 Flange Thickness
7.1 General
(13)
Required tolerances for flange thickness are as follows:
For the purpose of determining conformance with
this Standard, the convention for fixing significant digits
where limits, maximum or minimum values, are specified shall be rounded as defined in ASTM Practice E 29.
This requires that an observed or calculated value shall
be rounded to the nearest unit in the last right-hand
digit used for expressing the limit. The listing of decimal
tolerances does not imply a particular method of
measurement.
Size
NPS ≤ 18
NPS ≥ 20
7.5 Welding End Flange Ends and Hubs
7.5.1 Outside Diameter. Required tolerances for the
nominal outside diameter dimension A of Figs. 7 and 8
(Figs. II-7 and II-8 of Mandatory Appendix II) of welding
ends of welding neck flanges are as follows:
Required tolerances for various flanges and flanged
fitting elements are as follows:
(a) Center-to-Contact Surfaces Other Than Ring Joint
Size
NPS ≤ 5
NPS ≥ 6
Tolerance
NPS ≤ 10
NPS ≥ 12
(b) Center-to-End (Ring Joint)
Tolerance
NPS ≤ 10
NPS ≥ 12
±1.0 mm (±0.03 in.)
±1.5 mm (±0.06 in.)
(b) For Fig. 9 (Fig. II-9 of Mandatory Appendix II),
the tolerances are
±2.0 mm (±0.06 in.)
±3.0 mm (±0.12 in.)
Size
(d) End-to-End (Ring Joint)
Size
NPS ≤ 10
NPS ≥ 12
Tolerance
NPS ≤ 10
NPS ≥ 12
Tolerance
NPS ≤ 10
±1.0 mm (±0.03 in.)
12 ≤ NPS ≤ 18
±1.5 mm (±0.06 in.)
NPS ≥ 20
+3.0, −1.5 mm (+0.12, −0.06 in.)
Tolerance
NPS ≤ 10
NPS ≥ 12
+2.0, −1.0 mm (+0.09, −0.03 in.)
+4.0, −1.0 mm (+0.16, −0.03 in.)
Size
(c) Contact Surface-to-Contact Surface Other Than Ring
Joint
Size
Tolerance
7.5.2 Inside Diameter. Required tolerances for the
nominal inside diameter of welding ends of welding
neck flanges and smaller bore of socket welding flanges
(dimension B in the referenced figures) are as follows:
(a) For Figs. 7 and 8 (Figs. II-7 and II-8 of Mandatory
Appendix II) and Fig. 4, the tolerances are
±1.0 mm (±0.03 in.)
±1.5 mm (±0.06 in.)
Size
+3.0, −0.0 mm (+0.12, −0.00 in.)
+5.0, −0.0 mm (+0.19, −0.00 in.)
The plus tolerance is applicable to bolting bearing
surfaces whether as-forged, as-cast, spot-faced, or backfaced (see para. 6.6).
7.2 Center-to-Contact Surfaces and Center-to-End
Tolerances
Size
Tolerance
Tolerance
+0.0, −1.0 mm (+0.0, −0.03 in.)
+0.0, −1.5 mm (+0.0, −0.06 in.)
7.5.3 Backing Ring Contact Surface. Required tolerances for the bore of the backing ring contact surface of
±2.0 mm (±0.06 in.)
±3.0 mm (±0.12 in.)
13
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
7.8 Drilling and Facing
welding neck flanges, dimension C of Figs. 9 and 10
(Figs. II-9 and II-10 of Mandatory Appendix II) are as
follows:
Size
2 ≤ NPS ≤ 24
7.8.1 Bolt Circle Diameter. The required tolerance
for all bolt circle diameters is as follows:
Tolerance
±1.5 mm (±0.06 in.)
+0.25, −0.0 mm (+ 0.01, −0.0 in.)
7.8.2 Bolt Hole to Bolt Hole. The required tolerance
for the center-to-center of adjacent bolt holes is as
follows:
7.5.4 Hub Thickness. Despite the tolerances specified for dimensions A and B, the thickness of the hub
at the welding end shall not be less than 871⁄2% of the
nominal thickness of the pipe, having an under-tolerance
of 12.5% for the pipe wall thickness to which the flange
is to be attached or the minimum wall thickness as specified by the purchaser.
±0.8 mm (±0.03 in.)
7.8.3 Bolt Circle Concentricity. The required tolerances for concentricity between the flange bolt circle
diameter and machined facing diameters are as follows:
Size
7.6 Length Through Hub on Welding Neck Flanges
NPS ≤ 2 ⁄2
NPS ≥ 3
The required tolerances for the length through hubs
on welding neck flanges are as follows:
Size
NPS ≤ 4
5 ≤ NPS ≤10
NPS ≥ 12
8
Tolerance
8.2 Flanged Fitting Test
8.2.1 Shell Pressure Test. Each flanged fitting shall
be given a shell pressure test.
8.2.2 Test Conditions. The shell pressure test for
flanged fittings shall be at a pressure no less than 1.5
times the 38°C (100°F) pressure rating rounded off to
the next higher 1 bar (25 psi) increment.
Tolerance
+1.0, −0.0 mm (+0.03, −0.0 in.)
+1.5, −0.0 mm (+ 0.06, −0.0 in.)
8.2.3 Test Fluid. The pressure test shall be made
using water, which may contain a corrosion inhibitor or
kerosene as the test fluid. Other suitable test fluids may
be used provided their viscosity is no greater than that
of water. The test fluid temperature shall not exceed
50°C (125°F).
7.7.2 Counterbores, Threaded Flanges. The required
tolerances for threaded flange counterbores are as
follows:
Size
NPS ≤ 10
NPS ≥ 12
Tolerance
8.2.4 Test Duration. The test duration shall be as
follows:
+1.0, −0.0 mm (+0.03, −0.0 in.)
+1.5, −0.0 mm (+0.06, −0.0 in.)
Fitting Size
7.7.3 Counterbores, Socket Welding Flanges. The
required tolerance for socket end counterbores is as
follows:
Size
1
⁄2 ≤ NPS ≤3
PRESSURE TESTING
Flanges are not required to be pressure tested.
7.7.1 Lapped and Slip-On Flange Bores. The
required tolerances for lapped and slip-on flange bore
diameters are as follows:
NPS ≤ 10
NPS ≥ 12
0.8 mm (0.03 in.)
1.5 mm (0.06 in.)
8.1 Flange Test
±1.5 mm (±0.06 in.)
+1.5, −3.0 mm (+0.06, −0.12 in.)
+3.0, −5.0 mm (+0.12, −0.18 in.)
7.7 Flange Bore Diameter
Size
Tolerance
1
NPS ≤ 2
21⁄2 ≤ NPS ≤ 8
NPS ≥ 10
Tolerance
Duration, sec
60
120
180
8.2.5 Acceptance. No visible leakage is permitted
through the pressure boundary wall.
±0.25 mm (±0.010 in.)
14
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. 1 Bevel for Outside Thickness
Fig. 3 Bevel for Combined Thickness
Welding Ends
(Welding Neck Flanges)
Additional Thickness for
Welding to Higher Strength Pipe
Welding Ends
(Welding Neck Flanges)
Additional Thickness for
Welding to Higher Strength Pipe
GENERAL NOTES:
(a) When the materials joined have equal minimum specified yield
strength, there shall be no restriction on the minimum slope.
(b) Neither t1, t2, nor their sum t1 + t2 shall exceed 0.5t.
(c) When the minimum specified yield strengths of the sections to
be joined are unequal, the value of tD shall at least equal the
mating wall thickness times the ratio of minimum specified
yield strength of the pipe to minimum specified yield strength
of the flange.
(d) Welding shall be in accordance with the applicable code.
GENERAL NOTES:
(a) When the materials joined have equal minimum specified yield
strength, there shall be no restriction on the minimum slope.
(b) Neither t1, t2, nor their sum t1 + t2 shall exceed 0.5t.
(c) When the minimum specified yield strengths of the sections to
be joined are unequal, the value of tD shall at least equal the
mating wall thickness times the ratio of minimum specified
yield strength of the pipe to minimum specified yield strength
of the flange.
(d) Welding shall be in accordance with the applicable code.
Fig. 4 Straight Hub Welding Flanges
Fig. 2 Bevel for Inside Thickness
X
Note (1)
B
Note (3)
Welding Ends
(Welding Neck Flanges)
Additional Thickness for
Welding to Higher Strength Pipe
Note (2)
Y
Note (4)
tf
GENERAL NOTES:
(a) When the materials joined have equal minimum specified yield
strength, there shall be no restriction on the minimum slope.
(b) Neither t1, t2, nor their sum t1 + t2 shall exceed 0.5t.
(c) When the minimum specified yield strengths of the sections to
be joined are unequal, the value of tD shall at least equal the
mating wall thickness times the ratio of minimum specified
yield strength of the pipe to minimum specified yield strength
of the flange.
(d) Welding shall be in accordance with the applicable code.
O
GENERAL NOTES:
(a) O p outside diameter of flange (see para. 2.8)
(b) tf p minimum thickness of flange (see para. 2.8)
NOTES:
(1) X p diameter of hub (see para. 2.8). Tolerance +3.0, 0.0 mm
(+0.12, 0.00 in.).
(2) Hub end (see para. 2.8.4)
(3) B p bore (see para. 2.8.3 and 7.5.2)
(4) Y p length through hub (see para. 2.8.2)
15
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
ASME B16.5-2013
Fig. 5 Method of Designating Outlets of Reducing Fittings in Specifications
(Flanged Fittings)
GENERAL NOTES:
(a) The largest opening establishes the basic size of a reducing fitting. The largest opening is named first, except that for bull head tees,
which are reducing on both runs, and for double branch elbows where both branches are reducing, the outlet is the largest opening
and named last in both cases.
(b) In designating the openings of reducing fittings, they should be read in the order indicated by the sequence of the letters A, B, C, and
D. In designating the outlets of side outlet reducing fittings, the side outlet is named last, and in the case of the cross, which is not
shown, the side outlet is designated by the letter E.
(c) Sketches are illustrative only and do not imply required design (see para. 3.2).
16
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. 6 End Flange Facings and Their Relationship to Flange Thickness and
Center-to-End and End-to-End Dimensions
AA, BB, CC, etc.
[Notes (1), (2)]
AA, BB, CC, etc.
[Notes (1), (2)]
tf
tf
2 mm
2-mm raised face
regularly furnished
on Classes 150 and R
300, unless otherwise
ordered
5 mm
Small female face
(on end of pipe)
X
Centerline of fitting
7-mm raised face
regularly furnished
R
on Classes 400 and
higher, unless
otherwise ordered
7 mm
Large or small
male face
[Notes (4), (5)]
S R
Small Large
male male
Large or small
tongue face
[Notes (4), (5)] T
R
Note (3)
U
Small Large Small
tongue tongue and
large
tongue
Large or small
5 mm
groove face
[Notes (4),
(5)]
K [Note (6)]
Note (3)
Y L W
Z
Small Large Small
groove groove and
large
groove
5 mm
E
Ring joint
face
K [Note (6)]
X WL
Small Large
female female
tf
Note (3)
K [Note (7)] P
7 mm
HH, JJ, KK, etc.
[Notes (1), (2)]
Small male face
(on end of pipe)
S
Note (3)
End Flange Facings
Flange Thickness and Center-to-End Dimensions
Classes 150 through 2500
t [Note (8)]
t
Raised face
R
t [Note (8)]
E
Ring joint
face
t
K [Note (9)]
P
Lap Joint Stub End
Facings and Thickness
17
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Centerline of fitting
7 mm
7 mm
Large or small
female face
[Notes (4), (5)]
(13)
ASME B16.5-2013
(13)
Fig. 6 End Flange Facings and Their Relationship to Flange Thickness and Center-to-End
and End-to-End Dimensions (Cont’d)
GENERAL NOTE:
Dimensions are in millimeters. For dimensions in inches, refer to Mandatory Appendix II, Fig. II 6.
NOTES:
(1) See paras. 6.2 and 6.4.
(2) See Tables 7 through 22.
(3) For small male and female joints, care should be taken in the use of these dimensions to ensure that the inside diameter of the pipe
fitting is small enough to permit sufficient bearing surface to prevent crushing of the gasket (see Table 4). This applies particularly on
lines where the joint is made on the end of the pipe. Threaded companion flanges for small male and female joints are furnished with
plain face and threaded with American National Standard Locknut Thread (NPSL).
(4) See Table 4 for dimensions of facings (other than ring joint) and Table 5 for ring joint facing.
(5) Large male and female faces and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
(6) See Table 4.
(7) See Table 5.
(8) See para. 6.4.3.
(9) See para. 6.4.3.5 and Table 5.
18
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. 7 Bevel for Wall Thicknesses t From 5 mm to
22 mm Inclusive
6-mm
min.
1:3 max. slope
37.5 deg ± 2.5 deg
45-deg max.
t
Fig. 8 Bevel for Wall Thicknesses t Greater Than
22 mm
2 mm ± 1 mm
A
B
X
6-mm
min.
1:3 max. slope
Welding Ends
(Welding Neck Flanges, No Backing Rings)
A
B
t
x
p
p
p
p
10 deg ± 2.5 deg
3-mm min. radius
37.5 deg ± 2.5 deg
nominal outside diameter of pipe
nominal inside diameter of pipe
nominal wall thickness of pipe
diameter of hub (see dimensional tables)
t
45-deg max.
19 mm
2 mm ± 1 mm
GENERAL NOTES:
(a) Dimensions are in millimeters. For dimensions in inches, refer
to Mandatory Appendix II, Figs. II 7 and II 8.
(b) See paras. 6.7, 6.8, and 7.4 for details and tolerances.
(c) See Figs. 9 and 10 for additional details of welding ends.
(d) When the thickness of the hub at the bevel is greater than
that of the pipe to which the flange is joined and the addi
tional thickness is provided on the outside diameter, a taper
weld having a slope not exceeding 1 to 3 may be used, or,
alternatively, the greater outside diameter may be tapered at
the same maximum slope or less, from a point on the welding
bevel equal to the outside diameter of the mating pipe. Simi
larly, when the greater thickness is provided on the inside of
the flange, it shall be taper bored from the welding end at a
slope not exceeding 1 to 3. When flanges covered by this
Standard are intended for services with light wall, higher
strength pipe, the thickness of the hub at the bevel may be
greater than that of the pipe to which the flange is joined.
Under these conditions, a single taper hub may be provided.
The additional thickness may be provided on either inside or
outside or partially on each side, but the total additional thick
ness shall not exceed one half times the nominal wall thick
ness of intended mating pipe (see Figs. 1 through 3).
(e) The hub transition from the A diameter to the X diameter shall
fall within the maximum and minimum envelope outlined by
the 1:3 max. slope and solid line.
(f) For welding end dimensions, refer to ASME B16.25.
(g) The 6 mm min. dimension applies only to the solid line
configuration.
A
B
X
Welding Ends
(Welding Neck Flanges, No Backing Rings)
A
B
t
x
p
p
p
p
nominal outside diameter of pipe
nominal inside diameter of pipe
nominal wall thickness of pipe
diameter of hub (see dimensional tables)
GENERAL NOTE:
Please see General Notes for Fig. 7.
19
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. 9 Inside Contour for Use With Rectangular
Backing Ring
Fig. 10 Inside Contour for Use With Taper Backing
Ring
30-deg max.
10 deg
C
B
3.0-mm min. radius
C
6.0-mm min.
13-mm min. [Note (1)]
Welding Ends
(Welding Neck Flanges)
Welding Ends
(Welding Neck Flanges)
nominal outside diameter of welding end, mm
nominal inside diameter of pipe (p A 2t), mm
A 0.79 1.75t 0.25, mm
nominal wall thickness of pipe, mm
minus tolerance on outside diameter of pipe to
ASTM A106, etc.
1.75t p 871⁄2% of nominal wall (permitted by ASTM A106,
etc.) multiplied by two to convert into terms of
diameter
0.25 mm p plus tolerance on diameter C, mm (see
para. 7.5.3)
A
B
C
t
0.79 mm
p
p
p
p
p
nominal outside diameter of welding end, mm
nominal inside diameter of pipe p A 2t, mm
A 0.79 1.75t 0.25, mm
nominal wall thickness of pipe, mm
minus tolerance on outside diameter of pipe to
ASTM A106, etc.
1.75t p 871⁄2% of nominal wall (permitted by ASTM A106,
etc.) multiplied by two to convert into terms of
diameter
0.25 mm p plus tolerance on diameter C, mm (see
para. 7.5.3)
A
B
C
t
0.79 mm
GENERAL NOTES:
(a) Dimensions are in millimeters. For dimensions in inches, refer
to Mandatory Appendix II, Fig. II 9.
(b) See paras. 6.7, 6.8, and 7.5 for details and tolerances.
(c) See Figs. 7 and 8 for welding end details of welding neck
flanges.
(d) For dimensions, see ASME B16.25.
p
p
p
p
p
GENERAL NOTES:
(a) Dimensions are in millimeters. For dimensions in inches, refer
to Mandatory Appendix II, Fig. II 10.
(b) See paras. 6.7, 6.8, and 7.5 for details and tolerances.
(c) See Figs. 7 and 8 for welding end details of welding neck
flanges.
(d) For dimensions, see ASME B16.25.
NOTE:
(1) 13 mm depth based on use of 19 mm wide backing ring.
20
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. 11 Thread Length for Connection Tapping
Fig. 13 Bosses for Connections
Correction
Size, NPS
Thread Length,
T, in.
3
⁄8
⁄2
3
⁄4
1
11⁄4
11⁄2
2
10.5
13.5
14.0
17.5
18.1
18.3
19.4
1
Correction
Size, NPS
Minimum Boss
Diameter, J, in.
3
GENERAL NOTE:
⁄8
⁄2
3
⁄4
1
11⁄4
11⁄2
2
1
See paras. 6.12.2, 6.12.5, and 6.12.6.
NOTE:
(1) In no case shall the effective length of thread T be less than
that shown in the table above. These lengths are equal to the
effective thread length of external pipe threads
(ASME B1.20.1).
31.8
38.1
44.5
53.8
63.5
69.8
85.8
GENERAL NOTES:
(a) See para. 6.12.5.
(b) Dimensions are in millimeters. For dimensions in inches, refer
to Mandatory Appendix II, Figs. II 11 through II 14.
Fig. 12 Socket Welding for Connections
Fig. 14 Butt Welding for Connections
Correction
Size, NPS
3
⁄8
⁄2
3
⁄4
1
11⁄4
11⁄2
2
1
GENERAL NOTE:
Minimum
Diameter
of
Socket,
A, in.
Minimum
Depth,
B, in.
17.5
21.8
26.9
33.8
42.7
48.8
61.2
4.8
4.8
6.4
6.4
6.4
6.4
7.9
GENERAL NOTE:
See paras. 6.12.4 and 6.12.5.
See paras. 6.12.3, 6.12.5, and 6.12.6.
21
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. 15 Method of Designating Location of Auxiliary Connections When Specified
(Flanged Fittings)
GENERAL NOTE: The above sketches show views of the same fitting and represent fittings with symmetrical shapes, with the exception of
the side outlet elbow and side outlet tee (straight sizes). Sketches are illustrative only and do not imply required design (see para. 6.12).
22
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.1 Pressure–Temperature Ratings for Group 1.1 Materials
Nominal Designation
Forgings
C Si
A105 (1)
C Mn Si
C Mn Si V
31⁄2Ni
A350 Gr. LF2 (1)
A350 Gr. LF6 Cl 1 (3)
A350 Gr. LF3
Castings
A216 Gr.
WCB (1)
...
...
...
Plates
A515 Gr. 70 (1)
A516 Gr. 70 (1), (2)
A537 Cl. 1 (4)
...
Working Pressure by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
19.6
19.2
17.7
15.8
13.8
51.1
50.1
46.6
45.1
43.8
68.1
66.8
62.1
60.1
58.4
102.1
100.2
93.2
90.2
87.6
153.2
150.4
139.8
135.2
131.4
255.3
250.6
233.0
225.4
219.0
425.5
417.7
388.3
375.6
365.0
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
41.9
39.8
38.7
37.6
36.4
55.9
53.1
51.6
50.1
48.5
83.9
79.6
77.4
75.1
72.7
125.8
119.5
116.1
112.7
109.1
209.7
199.1
193.6
187.8
181.8
349.5
331.8
322.6
313.0
303.1
400
425
450
475
500
538
6.5
5.5
4.6
3.7
2.8
1.4
34.7
28.8
23.0
17.4
11.8
5.9
46.3
38.4
30.7
23.2
15.7
7.9
69.4
57.5
46.0
34.9
23.5
11.8
104.2
86.3
69.0
52.3
35.3
17.7
173.6
143.8
115.0
87.2
58.8
29.5
289.3
239.7
191.7
145.3
97.9
49.2
NOTES:
(1) Upon prolonged exposure to temperatures above 425°C, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 425°C.
(2) Not to be used over 455°C.
(3) Not to be used over 260°C.
(4) Not to be used over 370°C.
23
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.2 Pressure–Temperature Ratings for Group 1.2 Materials
Nominal Designation
C Mn Si
C Mn Si
C Mn Si V
Forgings
Castings
...
...
A350 Gr. LF6 Cl.2 (3)
21⁄2Ni
1
3 ⁄2Ni
Plates
A216 Gr. WCC (1)
A352 Gr. LCC (2)
...
...
...
...
...
A352 Gr. LC2
A203 Gr. B (1)
...
A352 Gr. LC3 (2)
A203 Gr. E (1)
Working Pressure by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
19.8
19.5
17.7
15.8
51.7
51.7
51.5
50.2
68.9
68.9
68.7
66.8
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.5
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.1
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
64.8
61.7
57.0
55.0
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.2
231.8
214.4
206.6
405.4
386.2
357.1
344.3
350
375
400
425
8.4
7.4
6.5
5.5
40.0
37.8
34.7
28.8
53.4
50.4
46.3
38.4
80.0
75.7
69.4
57.5
120.1
113.5
104.2
86.3
200.1
189.2
173.6
143.8
333.5
315.3
289.3
239.7
450
475
500
538
4.6
3.7
2.8
1.4
23.0
17.1
11.6
5.9
30.7
22.8
15.4
7.9
46.0
34.2
23.2
11.8
69.0
51.3
34.7
17.7
115.0
85.4
57.9
29.5
191.7
142.4
96.5
49.2
NOTES:
(1) Upon prolonged exposure to temperatures above 425°C, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 425°C.
(2) Not to be used over 340°C.
(3) Not to be used over 260°C.
24
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.3 Pressure–Temperature Ratings for Group 1.3 Materials
Nominal Designation
Forgings
C Si
...
C Mn Si
...
Castings
Plates
A352 LCB (1)
A515 Gr. 65 (2)
...
A516 Gr. 65 (2), (3)
1
C ⁄2Mo
C 1⁄2Mo
...
...
21⁄2Ni
...
...
A203 Gr. A (2)
...
...
A203 Gr. D (2)
1
3 ⁄2Ni
(13)
A217 Gr. WC1 (4) (6)
A352 Gr. LC1 (1)
...
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
18.4
18.2
17.4
15.8
13.8
12.1
48.0
47.5
45.3
43.9
42.5
40.8
64.0
63.3
60.5
58.6
56.7
54.4
96.0
94.9
90.7
87.9
85.1
81.6
144.1
142.4
136.0
131.8
127.6
122.3
240.1
237.3
226.7
219.7
212.7
203.9
400.1
395.6
377.8
366.1
354.4
339.8
300
325
350
375
400
10.2
9.3
8.4
7.4
6.5
38.7
37.6
36.4
35.0
32.6
51.6
50.1
48.5
46.6
43.5
77.4
75.2
72.8
69.9
65.2
116.1
112.7
109.2
104.9
97.9
193.4
187.9
182.0
174.9
163.1
322.4
313.1
303.3
291.4
271.9
425
450
475
500
538
5.5
4.6
3.7
2.8
1.4
27.3
21.6
15.7
11.1
5.9
36.4
28.8
20.9
14.8
7.9
54.6
43.2
31.3
22.1
11.8
81.9
64.8
47.0
33.2
17.7
136.5
107.9
78.3
55.4
29.5
227.5
179.9
130.6
92.3
49.2
NOTES:
(1) Not to be used over 340°C.
(2) Upon prolonged exposure to temperatures above 425°C, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 425°C.
(3) Not to be used over 455°C.
(4) Upon prolonged exposure to temperatures above 465°C, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 465°C.
(5) Use normalized and tempered material only.
(6) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
25
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.4 Pressure–Temperature Ratings for Group 1.4 Materials
Nominal Designation
Forgings
Castings
...
...
A515 Gr. 60 (1)
...
A516 Gr. 60 (1), (2)
C Si
C Mn Si
A350 Gr. LF1, Cl. 1 (1)
Plates
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
16.3
16.0
14.9
14.4
13.8
42.6
41.8
38.8
37.6
36.4
56.7
55.7
51.8
50.1
48.5
85.1
83.5
77.7
75.1
72.8
127.7
125.3
116.5
112.7
109.2
212.8
208.9
194.2
187.8
182.1
354.6
348.1
323.6
313.0
303.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
34.9
33.2
32.2
31.2
30.4
46.6
44.2
43.0
41.7
40.5
69.8
66.4
64.5
62.5
60.7
104.7
99.5
96.7
93.7
91.1
174.6
165.9
161.2
156.2
151.8
291.0
276.5
268.6
260.4
253.0
400
425
450
475
500
538
6.5
5.5
4.6
3.7
2.8
1.4
29.3
25.8
21.4
14.1
10.3
5.9
39.1
34.4
28.5
18.8
13.7
7.9
58.7
51.5
42.7
28.2
20.6
11.8
88.0
77.3
64.1
42.3
30.9
17.7
146.7
128.8
106.8
70.5
51.5
29.5
244.5
214.7
178.0
117.4
85.9
49.2
NOTES:
(1) Upon prolonged exposure to temperatures above 425°C, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 425°C.
(2) Not to be used over 455°C.
26
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.5 Pressure–Temperature Ratings for Group 1.5 Materials
Nominal Designation
1
C ⁄2Mo
C 1⁄2Mo
Forgings
Castings
A182 Gr. F1 (1)
...
Plates
...
...
A204 Gr. A (1)
A204 Gr. B (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
18.4
18.4
17.7
15.8
48.0
48.0
47.9
47.3
64.0
64.0
63.9
63.1
96.0
96.0
95.9
94.7
144.1
144.1
143.8
142.0
240.1
240.1
239.7
236.7
400.1
400.1
399.5
394.5
200
250
300
325
13.8
12.1
10.2
9.3
45.8
44.5
42.9
41.4
61.1
59.3
57.0
55.0
91.6
89.0
85.7
82.6
137.4
133.5
128.6
124.0
229.0
222.5
214.4
206.6
381.7
370.9
357.1
344.3
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
53.6
51.6
48.9
46.5
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
24.1
11.3
45.1
42.3
32.1
15.1
67.7
63.4
48.1
22.7
101.4
95.1
72.2
34.0
169.0
158.2
120.3
56.7
281.8
263.9
200.5
94.6
NOTE:
(1) Upon prolonged exposure to temperatures above 465°C, the carbide phase of carbon molybdenum
steel may be converted to graphite. Permissible but not recommended for prolonged use above
465°C.
27
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.7 Pressure–Temperature Ratings for Group 1.7 Materials
(13)
Nominal Designation
1
⁄2Cr 1⁄2Mo
Forgings
Castings
Plates
...
...
A182 Gr. F2 (1)
Ni 1⁄2Cr 1⁄2Mo
...
A217 Gr. WC4 (1) (3)
...
3
...
A217 Gr. WC5 (2), (3)
...
⁄4Ni 3⁄4Cr 1Mo
Working Pressures By Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.8
19.5
17.7
15.8
13.8
12.1
51.7
51.7
51.5
50.3
48.6
46.3
68.9
68.9
68.7
66.8
64.8
61.7
103.4
103.4
103.0
100.3
97.2
92.7
155.1
155.1
154.6
150.6
145.8
139.0
258.6
258.6
257.6
250.8
243.4
231.8
430.9
430.9
429.4
418.2
405.4
386.2
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
42.9
41.4
40.3
38.9
36.5
35.2
57.0
55.0
53.6
51.6
48.9
46.5
85.7
82.6
80.4
77.6
73.3
70.0
128.6
124.0
120.7
116.5
109.8
105.1
214.4
206.6
201.1
194.1
183.1
175.1
357.1
344.3
335.3
323.2
304.9
291.6
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
33.7
31.7
26.7
13.9
12.6
7.2
45.1
42.3
35.6
18.6
16.8
9.6
67.7
63.4
53.4
27.9
25.2
14.4
101.4
95.1
80.1
41.8
37.8
21.5
169.0
158.2
133.4
69.7
63.0
35.9
281.8
263.9
222.4
116.2
105.0
59.8
NOTES:
(1) Not to be used over 538°C.
(2) Use normalized and tempered material only.
(3) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
28
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.9 Pressure–Temperature Ratings for Group 1.9 Materials
Nominal Designation
Forgings
11⁄4Cr 1⁄2Mo
Castings
...
11⁄4Cr 1⁄2Mo Si
Plates
A217 Gr. WC6
(1) (3)
A182 Gr. F11 Cl. 2
(1), (4)
...
(13)
...
A387 Gr. 11
Cl. 2 (4)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.8
19.5
17.7
15.8
13.8
12.1
51.7
51.7
51.5
49.7
48.0
46.3
68.9
68.9
68.6
66.3
63.9
61.7
103.4
103.4
103.0
99.5
95.9
92.7
155.1
155.1
154.4
149.2
143.9
139.0
258.6
258.6
257.4
248.7
239.8
231.8
430.9
430.9
429.0
414.5
399.6
386.2
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
42.9
41.4
40.3
38.9
36.5
35.2
57.0
55.0
53.6
51.6
48.9
46.5
85.7
82.6
80.4
77.6
73.3
70.0
128.6
124.0
120.7
116.5
109.8
105.1
214.4
206.6
201.1
194.1
183.1
175.1
357.1
344.3
335.3
323.2
304.9
291.6
450
475
500
538
550
575
600
625
650
4.6
3.7
2.8
1.4
...
...
...
...
...
33.7
31.7
25.7
14.9
12.7
8.8
6.1
4.3
2.8
45.1
42.3
34.3
19.9
16.9
11.7
8.1
5.7
3.8
67.7
63.4
51.5
29.8
25.4
17.6
12.2
8.5
5.7
101.4
95.1
77.2
44.7
38.1
26.4
18.3
12.8
8.5
169.0
158.2
128.6
74.5
63.5
44.0
30.5
21.3
14.2
281.8
263.9
214.4
124.1
105.9
73.4
50.9
35.5
23.6
NOTES:
(1) Use normalized and tempered material only.
(2) Not to be used over 590°C.
(3) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
(4) Permissible but not recommended for prolonged use above 590°C.
29
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table 2-1.10
Nominal Designation
21⁄4Cr 1Mo
Pressure–Temperature Ratings for Group 1.10 Materials
Forgings
Castings
A182 Gr. F22 Cl. 3 (1)
Plates
A217 Gr. WC9
(2) (4)
A387 Gr. 22 Cl. 2 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
19.8
19.5
17.7
15.8
13.8
51.7
51.7
51.5
50.3
48.6
68.9
68.9
68.7
66.8
64.8
103.4
103.4
103.0
100.3
97.2
155.1
155.1
154.6
150.6
145.8
258.6
258.6
257.6
250.8
243.4
430.9
430.9
429.4
418.2
405.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
46.3
42.9
41.4
40.3
38.9
61.7
57.0
55.0
53.6
51.6
92.7
85.7
82.6
80.4
77.6
139.0
128.6
124.0
120.7
116.5
231.8
214.4
206.6
201.1
194.1
386.2
357.1
344.3
335.3
323.2
400
425
450
475
500
6.5
5.5
4.6
3.7
2.8
36.5
35.2
33.7
31.7
28.2
48.9
46.5
45.1
42.3
37.6
73.3
70.0
67.7
63.4
56.5
109.8
105.1
101.4
95.1
84.7
183.1
175.1
169.0
158.2
140.9
304.9
291.6
281.8
263.9
235.0
538
550
575
600
625
650
1.4
...
...
...
...
...
18.4
15.6
10.5
6.9
4.5
2.8
24.6
20.8
14.0
9.2
6.0
3.8
36.9
31.3
21.1
13.8
8.9
5.7
55.3
46.9
31.6
20.7
13.4
8.5
92.2
78.2
52.6
34.4
22.3
14.2
153.7
130.3
87.7
57.4
37.2
23.6
NOTES:
(1) Permissible but not recommended for prolonged use above 590°C.
(2) Use normalized and tempered material only.
(3) Not to be used over 590°C.
(4) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
30
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.11
Pressure–Temperature Ratings for Group 1.11 Materials
Nominal Designation
1
C ⁄2Mo
Forgings
Castings
...
...
Plates
A204, Gr. C (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
20.0
19.5
17.7
15.8
13.8
51.7
51.7
51.5
50.3
48.6
68.9
68.9
68.7
66.8
64.8
103.4
103.4
103.0
100.3
97.2
155.1
155.1
154.6
150.6
145.8
258.6
258.6
257.6
250.8
243.4
430.9
430.9
429.4
418.2
405.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
46.3
42.9
41.4
40.3
38.9
61.7
57.0
55.0
53.6
51.6
92.7
85.7
82.6
80.4
77.6
139.0
128.6
124.0
120.7
116.5
231.8
214.4
206.6
201.1
194.1
386.2
357.1
344.3
335.3
323.2
400
425
450
475
500
538
6.5
5.5
4.6
3.7
2.8
1.4
36.5
35.2
33.7
31.7
23.6
11.3
48.9
46.5
45.1
42.3
31.4
15.3
73.3
70.0
67.7
63.4
47.1
22.7
109.8
105.1
101.4
95.1
70.7
34.4
183.1
175.1
169.0
158.2
117.8
56.7
304.9
291.6
281.8
263.9
196.3
94.6
550
575
600
625
650
...
...
...
...
...
11.3
10.1
7.1
5.3
3.1
15.3
13.6
9.5
7.1
4.1
22.7
20.1
14.2
10.6
6.1
34.4
30.2
21.3
15.9
9.2
56.7
50.3
35.6
26.5
15.4
94.6
83.8
59.3
44.2
25.6
NOTE:
(1) Upon prolonged exposure to temperatures above 465°C, the carbide phase of carbon molybdenum
steel may be converted to graphite. Permissible but not recommended for prolonged use above
465°C.
31
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table 2-1.13
Pressure–Temperature Ratings for Group 1.13 Materials
Nominal Designation
1
5Cr ⁄2Mo
Forgings
Castings
A182 Gr. F5a
Plates
A217 Gr. C5 (1), (2)
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
20.0
19.5
17.7
15.8
13.8
51.7
51.7
51.5
50.3
48.6
68.9
68.9
68.7
66.8
64.8
103.4
103.4
103.0
100.3
97.2
155.1
155.1
154.6
150.6
145.8
258.6
258.6
257.6
250.8
243.4
430.9
430.9
429.4
418.2
405.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
46.3
42.9
41.4
40.3
38.9
61.7
57.0
55.0
53.6
51.6
92.7
85.7
82.6
80.4
77.6
139.0
128.6
124.0
120.7
116.5
231.8
214.4
206.6
201.1
194.1
386.2
357.1
344.3
335.3
323.2
400
425
450
475
500
6.5
5.5
4.6
3.7
2.8
36.5
35.2
33.7
27.9
21.4
48.9
46.5
45.1
37.1
28.5
73.3
70.0
67.7
55.7
42.8
109.8
105.1
101.4
83.6
64.1
183.1
175.1
169.0
139.3
106.9
304.9
291.6
281.8
232.1
178.2
538
550
575
600
625
650
1.4
...
...
...
...
...
13.7
12.0
8.9
6.2
4.0
2.4
18.3
16.1
11.8
8.3
5.3
3.2
27.4
24.1
17.8
12.5
8.0
4.7
41.1
36.1
26.7
18.7
12.0
7.1
68.6
60.2
44.4
31.2
20.0
11.8
114.3
100.4
74.0
51.9
33.3
19.7
NOTES:
(1) Use normalized and tempered material only.
(2) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
32
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.14
Pressure–Temperature Ratings for Group 1.14 Materials
Nominal Designation
Forgings
Castings
9Cr 1Mo
A182 Gr. F9
(13)
Plates
A217 Gr. C12 (1), (2)
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
20.0
19.5
17.7
15.8
13.8
51.7
51.7
51.5
50.3
48.6
68.9
68.9
68.7
66.8
64.8
103.4
103.4
103.0
100.3
97.2
155.1
155.1
154.6
150.6
145.8
258.6
258.6
257.6
250.8
243.4
430.9
430.9
429.4
418.2
405.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
46.3
42.9
41.4
40.3
38.9
61.7
57.0
55.0
53.6
51.6
92.7
85.7
82.6
80.4
77.6
139.0
128.6
124.0
120.7
116.5
231.8
214.4
206.6
201.1
194.1
386.2
357.1
344.3
335.3
323.2
400
425
450
475
500
6.5
5.5
4.6
3.7
2.8
36.5
35.2
33.7
31.7
28.2
48.9
46.5
45.1
42.3
37.6
73.3
70.0
67.7
63.4
56.5
109.8
105.1
101.4
95.1
84.7
183.1
175.1
169.0
158.2
140.9
304.9
291.6
281.8
263.9
235.0
538
550
575
600
625
650
1.4
...
...
...
...
...
17.5
15.0
10.5
7.2
5.0
3.5
23.3
20.0
13.9
9.6
6.6
4.7
35.0
30.0
20.9
14.4
9.9
7.1
52.5
45.0
31.4
21.5
14.9
10.6
87.5
75.0
52.3
35.9
24.8
17.7
145.8
125.0
87.1
59.8
41.4
29.5
NOTES:
(1) Use normalized and tempered material only.
(2) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
33
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table 2-1.15
Pressure–Temperature Ratings for Group 1.15 Materials
Nominal Designation
Forgings
9Cr 1Mo V
A182 Gr. F91
Castings
Plates
A217 Gr. C12A (1)
A387 Gr. 91 Cl. 2
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
20.0
19.5
17.7
15.8
13.8
51.7
51.7
51.5
50.3
48.6
68.9
68.9
68.7
66.8
64.8
103.4
103.4
103.0
100.3
97.2
155.1
155.1
154.6
150.6
145.8
258.6
258.6
257.6
250.8
243.4
430.9
430.9
429.4
418.2
405.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
46.3
42.9
41.4
40.3
38.9
61.7
57.0
55.0
53.6
51.6
92.7
85.7
82.6
80.4
77.6
139.0
128.6
124.0
120.7
116.5
231.8
214.4
206.6
201.1
194.1
386.2
357.1
344.3
335.3
323.2
400
425
450
475
500
6.5
5.5
4.6
3.7
2.8
36.5
35.2
33.7
31.7
28.2
48.9
46.5
45.1
42.3
37.6
73.3
70.0
67.7
63.4
56.5
109.8
105.1
101.4
95.1
84.7
183.1
175.1
169.0
158.2
140.9
304.9
291.6
281.8
263.9
235.0
538
550
575
600
625
650
1.4
...
...
...
...
...
25.2
25.0
24.0
19.5
14.6
9.9
33.4
33.3
31.9
26.0
19.5
13.2
50.0
49.8
47.9
39.0
29.2
19.9
75.2
74.8
71.8
58.5
43.8
29.8
125.5
124.9
119.7
97.5
73.0
49.6
208.9
208.0
199.5
162.5
121.7
82.7
NOTE:
(1) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
34
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.17
Pressure–Temperature Ratings for Group 1.17 Materials
Nominal Designation
1
1Cr ⁄2Mo
5Cr 1⁄2Mo
Forgings
Castings
Plates
...
...
...
...
A182 Gr. F12 Cl. 2 (1), (2)
A182 Gr. F5
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.8
19.5
17.7
15.8
13.8
12.1
51.7
51.5
50.4
48.2
46.3
44.8
68.9
68.7
67.3
64.2
61.7
59.8
103.4
103.0
100.9
96.4
92.5
89.6
155.1
154.5
151.3
144.5
138.8
134.5
258.6
257.5
252.2
240.9
231.3
224.1
430.9
429.2
420.4
401.5
385.6
373.5
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
42.9
41.4
40.3
38.9
36.5
35.2
57.0
55.0
53.6
51.6
48.9
46.5
85.7
82.6
80.4
77.6
73.3
70.0
128.6
124.0
120.7
116.5
109.8
105.1
214.4
206.6
201.1
194.1
183.1
175.1
357.1
344.3
335.3
323.2
304.9
291.6
450
475
500
538
550
575
600
625
650
4.6
3.7
2.8
1.4
...
...
...
...
...
33.7
27.9
21.4
13.7
12.0
8.8
6.1
4.0
2.4
45.1
37.1
28.5
18.3
16.1
11.7
8.1
5.3
3.2
67.7
55.7
42.8
27.4
24.1
17.6
12.1
8.0
4.7
101.4
83.6
64.1
41.1
36.1
26.4
18.2
12.0
7.1
169.0
139.3
106.9
68.6
60.2
44.0
30.3
20.0
11.8
281.8
232.1
178.2
114.3
100.4
73.4
50.4
33.3
19.7
NOTES:
(1) Use normalized and tempered material only.
(2) Permissible but not recommended for prolonged use above 590°C.
35
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-1.18
Pressure–Temperature Ratings for Group 1.18 Materials
Nominal Designation
9Cr 2W V
Forgings
A 182 Gr. F92 (1)
Castings
Plates
...
...
Working Pressures by Class, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
20.0
19.5
17.7
15.8
13.8
12.1
51.7
51.7
51.5
50.3
48.6
46.3
68.9
68.9
68.7
66.8
64.8
61.7
103.4
103.4
103.0
100.3
97.2
92.7
155.1
155.1
154.6
150.6
145.8
139.0
258.6
258.6
257.6
250.8
243.4
231.8
430.9
430.9
429.4
418.2
405.4
386.2
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
42.9
41.4
40.3
38.9
36.5
35.2
57.0
55.0
53.6
51.6
48.9
46.5
85.7
82.6
80.4
77.6
73.3
70.0
128.6
124.0
120.7
116.5
109.8
105.1
214.4
206.6
201.1
194.1
183.1
175.1
357.1
344.3
335.3
323.2
304.9
291.6
450
475
500
538
550
575
4.6
3.7
2.8
1.4
1.4
1.4
33.7
31.7
28.2
25.2
25.0
24.0
45.1
42.3
37.6
33.4
33.3
31.9
67.7
63.4
56.5
50.0
49.8
47.9
101.4
95.1
84.7
75.2
74.8
71.8
169.0
158.2
140.9
125.5
124.9
119.7
281.8
263.9
235.0
208.9
208.0
199.5
600
625
650
1.4
1.4
1.4
21.6
18.3
14.1
28.6
24.3
18.9
42.9
36.6
28.1
64.2
54.9
42.5
107.0
91.2
70.7
178.5
152.0
117.7
NOTE:
(1) Applications above 620°C are limited to tubing of maximum outside diameter of 31⁄2 in.
36
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.1 Pressure–Temperature Ratings for Group 2.1 Materials
Nominal Designation
Forgings
Castings
Plates
18Cr 8Ni
A182 Gr.
F304 (1)
A351 Gr.
CF3 (2)
A240 Gr.
304 (1)
18Cr 8Ni
A182 Gr. F304H
A351 Gr.
CF8 (1)
A240 Gr. 304H
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
19.0
18.3
15.7
14.2
49.6
47.8
40.9
37.0
66.2
63.8
54.5
49.3
99.3
95.6
81.7
74.0
148.9
143.5
122.6
111.0
248.2
239.1
204.3
185.0
413.7
398.5
340.4
308.4
200
250
300
325
13.2
12.1
10.2
9.3
34.5
32.5
30.9
30.2
46.0
43.3
41.2
40.3
69.0
65.0
61.8
60.4
103.4
97.5
92.7
90.7
172.4
162.4
154.6
151.1
287.3
270.7
257.6
251.9
350
375
400
425
8.4
7.4
6.5
5.5
29.6
29.0
28.4
28.0
39.5
38.7
37.9
37.3
59.3
58.1
56.9
56.0
88.9
87.1
85.3
84.0
148.1
145.2
142.2
140.0
246.9
241.9
237.0
233.3
450
475
500
538
4.6
3.7
2.8
1.4
27.4
26.9
26.5
24.4
36.5
35.9
35.3
32.6
54.8
53.9
53.0
48.9
82.2
80.8
79.5
73.3
137.0
134.7
132.4
122.1
228.4
224.5
220.7
203.6
550
575
600
625
...
...
...
...
23.6
20.8
16.9
13.8
31.4
27.8
22.5
18.4
47.1
41.7
33.8
27.6
70.7
62.5
50.6
41.4
117.8
104.2
84.4
68.9
196.3
173.7
140.7
114.9
650
675
700
725
...
...
...
...
11.3
9.3
8.0
6.8
15.0
12.5
10.7
9.0
22.5
18.7
16.1
13.5
33.8
28.0
24.1
20.3
56.3
46.7
40.1
33.8
93.8
77.9
66.9
56.3
750
775
800
816
...
...
...
...
5.8
4.6
3.5
2.8
7.7
6.2
4.8
3.8
11.6
9.0
7.0
5.9
17.3
13.7
10.5
8.6
28.9
22.8
17.4
14.1
48.1
38.0
29.2
23.8
NOTES:
(1) At temperatures over 538°C, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 425°C.
37
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.2 Pressure–Temperature Ratings for Group 2.2 Materials
Nominal Designation
Forgings
Castings
16Cr 12Ni 2Mo
A182 Gr. F316 (1)
A182 Gr. F316H
18Cr 13Ni 3Mo
A182 Gr. F317 (1)
19Cr 10Ni 3Mo
...
Plates
A351 Gr. CF3M (2)
A351 Gr. CF8M (1)
A240 Gr. 316 (1)
A240 Gr. 316H
...
A240 Gr. 317 (1)
A351 Gr. CG8M (3)
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
19.0
18.4
16.2
14.8
49.6
48.1
42.2
38.5
66.2
64.2
56.3
51.3
99.3
96.2
84.4
77.0
148.9
144.3
126.6
115.5
248.2
240.6
211.0
192.5
413.7
400.9
351.6
320.8
200
250
300
325
13.7
12.1
10.2
9.3
35.7
33.4
31.6
30.9
47.6
44.5
42.2
41.2
71.3
66.8
63.2
61.8
107.0
100.1
94.9
92.7
178.3
166.9
158.1
154.4
297.2
278.1
263.5
257.4
350
375
400
425
8.4
7.4
6.5
5.5
30.3
29.9
29.4
29.1
40.4
39.8
39.3
38.9
60.7
59.8
58.9
58.3
91.0
89.6
88.3
87.4
151.6
149.4
147.2
145.7
252.7
249.0
245.3
242.9
450
475
500
538
4.6
3.7
2.8
1.4
28.8
28.7
28.2
25.2
38.5
38.2
37.6
33.4
57.7
57.3
56.5
50.0
86.5
86.0
84.7
75.2
144.2
143.4
140.9
125.5
240.4
238.9
235.0
208.9
550
575
600
625
...
...
...
...
25.0
24.0
19.9
15.8
33.3
31.9
26.5
21.1
49.8
47.9
39.8
31.6
74.8
71.8
59.7
47.4
124.9
119.7
99.5
79.1
208.0
199.5
165.9
131.8
650
675
700
725
...
...
...
...
12.7
10.3
8.4
7.0
16.9
13.8
11.2
9.3
25.3
20.6
16.8
14.0
38.0
31.0
25.1
21.0
63.3
51.6
41.9
34.9
105.5
86.0
69.8
58.2
750
775
800
816
...
...
...
...
5.9
4.6
3.5
2.8
7.8
6.2
4.8
3.8
11.7
9.0
7.0
5.9
17.6
13.7
10.5
8.6
29.3
22.8
17.4
14.1
48.9
38.0
29.2
23.8
NOTES:
(1) At temperatures over 538°C, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 455°C.
(3) Not to be used over 538°C.
38
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.3 Pressure–Temperature Ratings for Group 2.3 Materials
Nominal Designation
16Cr 12Ni 2Mo
18Cr 13Ni 3Mo
18Cr 8Ni
Forgings
Castings
A182 Gr. F316L
A182 Gr. F317L
A182 Gr. F304L (1)
Plates
...
...
...
A240 Gr. 316L
...
A240 Gr. 304L (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
15.9
15.3
13.3
12.0
41.4
40.0
34.8
31.4
55.2
53.4
46.4
41.9
82.7
80.0
69.6
62.8
124.1
120.1
104.4
94.2
206.8
200.1
173.9
157.0
344.7
333.5
289.9
261.6
200
250
300
325
11.2
10.5
10.0
9.3
29.2
27.5
26.1
25.5
38.9
36.6
34.8
34.0
58.3
54.9
52.1
51.0
87.5
82.4
78.2
76.4
145.8
137.3
130.3
127.4
243.0
228.9
217.2
212.3
350
375
400
425
450
8.4
7.4
6.5
5.5
4.6
25.1
24.8
24.3
23.9
23.4
33.4
33.0
32.4
31.8
31.2
50.1
49.5
48.6
47.7
46.8
75.2
74.3
72.9
71.6
70.2
125.4
123.8
121.5
119.3
117.1
208.9
206.3
202.5
198.8
195.1
NOTE:
(1) Not to be used over 425°C.
39
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.4 Pressure–Temperature Ratings for Group 2.4 Materials
Nominal Designation
18Cr 10Ni Ti
18Cr 10Ni Ti
Forgings
Castings
A182 Gr. F321 (1)
A182 Gr. F321H (2)
Plates
...
...
A240 Gr. 321 (1)
A240 Gr. 321H (2)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
19.0
18.6
17.0
15.7
49.6
48.6
44.2
41.0
66.2
64.7
59.0
54.6
99.3
97.1
88.5
82.0
148.9
145.7
132.7
122.9
248.2
242.8
221.2
204.9
413.7
404.6
368.7
341.5
200
250
300
325
13.8
12.1
10.2
9.3
38.3
36.0
34.1
33.3
51.1
48.0
45.5
44.4
76.6
72.0
68.3
66.6
114.9
108.1
102.4
99.9
191.5
180.1
170.7
166.5
319.1
300.2
284.6
277.6
350
375
400
425
8.4
7.4
6.5
5.5
32.6
32.0
31.6
31.1
43.5
42.7
42.1
41.5
65.2
64.1
63.2
62.3
97.8
96.1
94.8
93.4
163.0
160.2
157.9
155.7
271.7
266.9
263.2
259.5
450
475
500
538
4.6
3.7
2.8
1.4
30.8
30.5
28.2
25.2
41.1
40.7
37.6
33.4
61.7
61.1
56.5
50.0
92.5
91.6
84.7
75.2
154.2
152.7
140.9
125.5
256.9
254.4
235.0
208.9
550
575
600
625
...
...
...
...
25.0
24.0
20.3
15.8
33.3
31.9
27.0
21.1
49.8
47.9
40.5
31.6
74.8
71.8
60.8
47.4
124.9
119.7
101.3
79.1
208.0
199.5
168.9
131.8
650
675
700
725
...
...
...
...
12.6
9.9
7.9
6.3
16.9
13.2
10.5
8.5
25.3
19.8
15.8
12.7
37.9
29.6
23.7
19.0
63.2
49.4
39.5
31.7
105.4
82.3
65.9
52.8
750
775
800
816
...
...
...
...
5.0
4.0
3.1
2.6
6.7
5.3
4.2
3.5
10.0
8.0
6.3
5.2
15.0
11.9
9.4
7.8
25.0
19.9
15.6
13.0
41.7
33.2
26.1
21.7
NOTES:
(1) Not to be used over 538°C.
(2) At temperatures over 538°C, use only if the material is heat treated by heating to a minimum tem
perature of 1 095°C.
40
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.5 Pressure–Temperature Ratings for Group 2.5 Materials
Nominal Designation
18Cr
18Cr
18Cr
18Cr
10Ni
10Ni
10Ni
10Ni
Cb
Cb
Cb
Cb
Forgings
A182
A182
A182
A182
Gr.
Gr.
Gr.
Gr.
Castings
F347 (1)
F347H (2)
F348 (1)
F348H (2)
Plates
...
...
...
...
A240
A240
A240
A240
Gr.
Gr.
Gr.
Gr.
347 (1)
347H (2)
348 (1)
348H (2)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
19.0
18.7
17.4
15.8
49.6
48.8
45.3
42.5
66.2
65.0
60.4
56.6
99.3
97.5
90.6
84.9
148.9
146.3
135.9
127.4
248.2
243.8
226.5
212.4
413.7
406.4
377.4
353.9
200
250
300
325
13.8
12.1
10.2
9.3
39.9
37.8
36.1
35.4
53.3
50.4
48.1
47.1
79.9
75.6
72.2
70.7
119.8
113.4
108.3
106.1
199.7
189.1
180.4
176.8
332.8
315.1
300.7
294.6
350
375
400
425
8.4
7.4
6.5
5.5
34.8
34.2
33.9
33.6
46.3
45.6
45.2
44.8
69.5
68.4
67.8
67.2
104.3
102.6
101.7
100.8
173.8
171.0
169.5
168.1
289.6
285.1
282.6
280.1
450
475
500
538
4.6
3.7
2.8
1.4
33.5
31.7
28.2
25.2
44.6
42.3
37.6
33.4
66.9
63.4
56.5
50.0
100.4
95.1
84.7
75.2
167.3
158.2
140.9
125.5
278.8
263.9
235.0
208.9
550
575
600
625
...
...
...
...
25.0
24.0
21.6
18.3
33.3
31.9
28.6
24.3
49.8
47.9
42.9
36.6
74.8
71.8
64.2
54.9
124.9
119.7
107.0
91.2
208.0
199.5
178.5
152.0
650
675
700
725
750
775
800
816
...
...
...
...
...
...
...
...
14.1
12.4
10.1
7.9
5.9
4.6
3.5
2.8
18.9
16.9
13.4
10.5
7.9
6.2
4.8
3.8
28.1
25.2
20.0
15.4
11.7
9.0
7.0
5.9
42.5
37.6
29.8
23.2
17.6
13.7
10.5
8.6
70.7
62.7
49.7
38.6
29.6
22.8
17.4
14.1
117.7
104.5
83.0
64.4
49.1
38.0
29.2
23.8
NOTES:
(1) Not to be used over 538°C.
(2) For temperatures over 538°C, use only if the material is heat treated by heating to a minimum tem
perature of 1 095°C.
41
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.6 Pressure–Temperature Ratings for Group 2.6 Materials
Nominal Designation
Forgings
Castings
Plates
23Cr 12Ni
...
...
A240 Gr. 309H
Working Pressures by Classes, bar
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.0
18.5
16.5
15.3
13.8
12.1
49.6
48.3
43.1
40.0
37.8
36.1
66.2
64.4
57.5
53.3
50.3
48.1
99.3
96.6
86.2
80.0
75.5
72.1
148.9
144.9
129.3
120.0
113.3
108.2
248.2
241.5
215.5
200.0
188.8
180.4
413.7
402.5
359.2
333.3
314.7
300.6
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
34.8
34.2
33.8
33.4
33.1
32.6
46.4
45.7
45.1
44.5
44.1
43.5
69.6
68.5
67.6
66.8
66.1
65.3
104.4
102.7
101.4
100.1
99.2
97.9
173.9
171.2
169.0
166.9
165.4
163.1
289.9
285.4
281.7
278.2
275.6
271.9
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
32.2
31.7
28.2
25.2
25.0
22.2
42.9
42.3
37.6
33.4
33.3
29.6
64.4
63.4
56.5
50.0
49.8
44.4
96.5
95.1
84.7
75.2
74.8
66.5
160.9
158.2
140.9
125.5
124.9
110.9
268.2
263.9
235.0
208.9
208.0
184.8
600
625
650
675
700
...
...
...
...
...
16.8
12.5
9.4
7.2
5.5
22.4
16.7
12.5
9.6
7.3
33.5
25.0
18.7
14.5
11.0
50.3
37.5
28.1
21.7
16.5
83.9
62.5
46.8
36.2
27.5
139.8
104.2
78.0
60.3
45.9
725
750
775
800
816
...
...
...
...
...
4.3
3.4
2.7
2.1
1.8
5.8
4.6
3.6
2.8
2.4
8.7
6.8
5.4
4.2
3.5
13.0
10.2
8.1
6.3
5.3
21.6
17.1
13.5
10.5
8.9
36.0
28.4
22.4
17.5
14.8
42
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.7 Pressure–Temperature Ratings for Group 2.7 Materials
Nominal Designation
25Cr 20Ni
Forgings
A182 Gr. F310 (1), (2)
Castings
Plates
...
A240 Gr. 310H
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.0
18.5
16.6
15.3
13.8
12.1
49.6
48.4
43.4
40.0
37.6
35.8
66.2
64.5
57.9
53.3
50.1
47.7
99.3
96.7
86.8
80.0
75.2
71.5
148.9
145.1
130.2
120.0
112.8
107.3
248.2
241.8
217.0
200.0
188.0
178.8
413.7
403.1
361.6
333.3
313.4
298.1
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
34.5
33.9
33.3
32.9
32.4
32.1
45.9
45.2
44.4
43.8
43.2
42.8
68.9
67.7
66.6
65.7
64.8
64.2
103.4
101.6
99.9
98.6
97.3
96.4
172.3
169.3
166.5
164.3
162.1
160.6
287.2
282.2
277.6
273.8
270.2
267.7
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
31.7
31.2
28.2
25.2
25.0
22.2
42.2
41.7
37.6
33.4
33.3
29.6
63.4
62.5
56.5
50.0
49.8
44.4
95.1
93.7
84.7
75.2
74.8
66.5
158.4
156.2
140.9
125.5
124.9
110.9
264.0
260.3
235.0
208.9
208.0
184.8
600
625
650
675
700
...
...
...
...
...
16.8
12.5
9.4
7.2
5.5
22.4
16.7
12.5
9.6
7.3
33.5
25.0
18.7
14.5
11.0
50.3
37.5
28.1
21.7
16.5
83.9
62.5
46.8
36.2
27.5
139.8
104.2
78.0
60.3
45.9
725
750
775
800
816
...
...
...
...
...
4.3
3.4
2.7
2.1
1.8
5.8
4.6
3.5
2.8
2.4
8.7
6.8
5.3
4.1
3.5
13.0
10.2
8.0
6.2
5.3
21.6
17.1
13.3
10.3
8.9
36.0
28.4
22.1
17.2
14.8
NOTES:
(1) At temperatures over 538°C, use only when the carbon content is 0.04% or higher.
(2) Service temperatures of 565°C and above should be used only when assurance is provided that
grain size is not finer than ASTM 6.
43
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.8 Pressure–Temperature Ratings for Group 2.8 Materials
Nominal Designation
Forgings
Castings
20Cr 18Ni 6Mo
A182 Gr. F44
22Cr 5Ni 3Mo N
A182 Gr. F51 (1)
...
A240 Gr.
S31803 (1)
25Cr 7Ni 4Mo N
A182 Gr. F53 (1)
...
A240 Gr.
S32750 (1)
24Cr 10Ni 4Mo V
...
A351 Gr. CE8MN (1)
...
25Cr 5Ni 2Mo 3Cu
...
A351 Gr.
CD4MCu (1)
...
25Cr 7Ni 3.5Mo W Cb
...
A351 Gr.
CD3MWCuN (1)
...
25Cr 7Ni 3.5Mo N Cu W
A351 Gr. CK3MCuN
Plates
A182 Gr. F55 (1)
...
A240 Gr. S31254
A240 Gr.
S32760 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
375
400
20.0
19.5
17.7
15.8
13.8
12.1
10.2
9.3
8.4
7.4
6.5
51.7
51.7
50.7
45.9
42.7
40.5
38.9
38.2
37.6
37.4
36.5
68.9
68.9
67.5
61.2
56.9
53.9
51.8
50.9
50.2
49.8
48.9
103.4
103.4
101.3
91.9
85.3
80.9
77.7
76.3
75.3
74.7
73.3
155.1
155.1
152.0
137.8
128.0
121.4
116.6
114.5
112.9
112.1
109.8
258.6
258.6
253.3
229.6
213.3
202.3
194.3
190.8
188.2
186.8
183.1
430.9
430.9
422.2
382.7
355.4
337.2
323.8
318.0
313.7
311.3
304.9
NOTE:
(1) This steel may become brittle after service at moderately elevated temperatures. Not to be used
over 315°C.
44
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.9 Pressure–Temperature Ratings for Group 2.9 Materials
Nominal Designation
Forgings
Castings
23Cr 12Ni
25Cr 20Ni
...
...
...
...
Plates
A240 Gr. 309S (1) (3)
A240 Gr. 310S (1) (3)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.0
18.5
16.5
15.3
13.8
12.1
49.6
48.3
43.1
40.0
37.6
35.8
66.2
64.4
57.5
53.3
50.1
47.7
99.3
96.6
86.2
80.0
75.2
71.5
148.9
144.9
129.3
120.0
112.8
107.3
248.2
241.5
215.5
200.0
188.0
178.8
413.7
402.5
359.2
333.3
313.4
298.1
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
34.5
33.9
33.3
32.9
32.4
32.1
45.9
45.2
44.4
43.8
43.2
42.8
68.9
67.7
66.6
65.7
64.8
64.2
103.4
101.6
99.9
98.6
97.3
96.4
172.3
169.3
166.5
164.3
162.1
160.6
287.2
282.2
277.6
273.8
270.2
267.7
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
31.7
31.2
28.2
23.4
20.5
15.1
42.2
41.7
37.6
31.2
27.3
20.1
63.4
62.5
56.5
46.8
41.0
30.2
95.1
93.7
84.7
70.2
61.5
45.3
158.4
156.2
140.9
117.0
102.5
75.5
264.0
260.3
235.0
195.0
170.8
125.8
600
625
650
675
700
...
...
...
...
...
11.0
8.1
5.8
3.7
2.2
14.7
10.9
7.8
4.9
2.9
22.1
16.3
11.6
7.4
4.3
33.1
24.4
17.4
11.1
6.5
55.1
40.7
29.1
18.4
10.8
91.9
67.9
48.5
30.7
18.0
725
750
775
800
816
...
...
...
...
...
1.4
1.0
0.8
0.6
0.5
1.8
1.4
1.1
0.8
0.6
2.7
2.1
1.6
1.2
0.9
4.1
3.1
2.5
1.8
1.4
6.8
5.2
4.1
3.0
2.4
11.4
8.6
6.8
5.0
3.9
NOTES:
(1) At temperatures over 538°C, use only when the carbon content is 0.04% or higher.
(2) At temperatures above 538°C, use only if the material is solution heat treated to the minimum tem
perature specified in the specification but not lower than 1 035°C, and quenching in water or rap
idly cooling by other means.
(3) This material should be used for service temperatures 565°C and above only when assurance is
provided that grain size is not finer than ASTM 6.
45
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.10
Pressure–Temperature Ratings for Group 2.10 Materials
Nominal Designation
Forgings
25Cr 12Ni
25Cr 12Ni
...
...
Castings
Plates
A351 Gr. CH8 (1)
A351 Gr. CH20 (1)
...
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
17.8
17.0
14.4
13.4
12.9
12.1
46.3
44.5
37.5
34.9
33.5
32.6
61.8
59.3
50.0
46.5
44.7
43.5
92.7
89.0
75.1
69.8
67.1
65.2
139.0
133.4
112.6
104.7
100.6
97.8
231.7
222.4
187.7
174.4
167.7
163.1
386.1
370.6
312.8
290.7
279.5
271.8
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
31.7
31.2
30.6
29.8
29.1
28.3
42.3
41.6
40.8
39.8
38.8
37.8
63.4
62.4
61.2
59.7
58.2
56.7
95.2
93.6
91.7
89.5
87.3
85.0
158.6
156.1
152.9
149.2
145.5
141.7
264.3
260.1
254.8
248.6
242.4
236.2
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
27.6
26.7
25.8
23.3
21.9
18.5
36.8
35.6
34.5
31.1
29.2
24.6
55.2
53.5
51.7
46.6
43.8
37.0
82.8
80.2
77.5
70.0
65.7
55.5
138.0
133.7
129.2
116.6
109.5
92.4
230.0
222.8
215.3
194.4
182.5
154.0
600
625
650
675
700
...
...
...
...
...
14.5
11.4
8.9
7.0
5.7
19.4
15.2
11.9
9.3
7.6
29.0
22.8
17.8
14.0
11.3
43.5
34.3
26.7
20.9
17.0
72.6
57.1
44.5
34.9
28.3
121.0
95.2
74.1
58.2
47.2
725
750
775
800
816
...
...
...
...
...
4.6
3.5
2.6
2.0
1.9
6.1
4.7
3.4
2.7
2.5
9.1
7.0
5.1
4.0
3.8
13.7
10.5
7.7
6.1
5.7
22.8
17.5
12.8
10.1
9.5
38.0
29.2
21.4
16.9
15.8
NOTE:
(1) At temperatures over 538°C, use only when the carbon content is 0.04% or higher.
46
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.11
Pressure–Temperature Ratings for Group 2.11 Materials
Nominal Designation
Forgings
18Cr 10Ni Cb
...
Castings
Plates
A351 Gr. CF8C (1)
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.0
18.7
17.4
15.8
13.8
12.1
49.6
48.8
45.3
42.5
39.9
37.8
66.2
65.0
60.4
56.6
53.3
50.4
99.3
97.5
90.6
84.9
79.9
75.6
148.9
146.3
135.9
127.4
119.8
113.4
248.2
243.8
226.5
212.4
199.7
189.1
413.7
406.4
377.4
353.9
332.8
315.1
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
36.1
35.4
34.8
34.2
33.9
33.6
48.1
47.1
46.3
45.6
45.2
44.8
72.2
70.7
69.5
68.4
67.8
67.2
108.3
106.1
104.3
102.6
101.7
100.8
180.4
176.8
173.8
171.0
169.5
168.1
300.7
294.6
289.6
285.1
282.6
280.1
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
33.5
31.7
28.2
25.2
25.0
24.0
44.6
42.3
37.6
33.4
33.3
31.9
66.9
63.4
56.5
50.0
49.8
47.9
100.4
95.1
84.7
75.2
74.8
71.8
167.3
158.2
140.9
125.5
124.9
119.7
278.8
263.9
235.0
208.9
208.0
199.5
600
625
650
675
700
...
...
...
...
...
19.8
13.9
10.3
8.0
5.6
26.4
18.5
13.7
10.6
7.5
39.6
27.7
20.6
15.9
11.2
59.4
41.6
30.9
23.9
16.8
99.0
69.3
51.5
39.8
28.1
165.1
115.5
85.8
66.3
46.8
725
750
775
800
816
...
...
...
...
...
4.0
3.1
2.5
2.0
1.9
5.3
4.1
3.3
2.7
2.5
8.0
6.2
4.9
4.0
3.8
11.9
9.3
7.4
6.1
5.7
19.9
15.5
12.3
10.1
9.5
33.1
25.8
20.4
16.9
15.8
NOTE:
(1) At temperatures over 538°C, use only when the carbon content is 0.04% or higher.
47
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-2.12
Pressure–Temperature Ratings for Group 2.12 Materials
Nominal Designation
Forgings
25Cr 20Ni
...
Castings
Plates
A351 Gr. CK20 (1)
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
17.8
17.0
14.4
13.4
12.9
12.1
46.3
44.5
37.5
34.9
33.5
32.6
61.8
59.3
50.0
46.5
44.7
43.5
92.7
89.0
75.1
69.8
67.1
65.2
139.0
133.4
112.6
104.7
100.6
97.8
231.7
222.4
187.7
174.4
167.7
163.1
386.1
370.6
312.8
290.7
279.5
271.8
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
31.7
31.2
30.6
29.8
29.1
28.3
42.3
41.6
40.8
39.8
38.8
37.8
63.4
62.4
61.2
59.7
58.2
56.7
95.2
93.6
91.7
89.5
87.3
85.0
158.6
156.1
152.9
149.2
145.5
141.7
264.3
260.1
254.8
248.6
242.4
236.2
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
27.6
26.7
25.8
23.3
22.9
21.7
36.8
35.6
34.5
31.1
30.6
28.9
55.2
53.5
51.7
46.6
45.9
43.3
82.8
80.2
77.5
70.0
68.8
65.0
138.0
133.7
129.2
116.6
114.7
108.3
230.0
222.8
215.3
194.4
191.2
180.4
600
625
650
675
700
...
...
...
...
...
19.4
16.8
14.1
11.5
8.8
25.9
22.4
18.8
15.4
11.7
38.8
33.7
28.1
23.0
17.5
58.2
50.5
42.2
34.6
26.3
97.1
84.1
70.4
57.6
43.8
161.8
140.2
117.3
96.0
73.0
725
750
775
800
816
...
...
...
...
...
6.3
4.5
3.1
2.3
1.9
8.5
6.0
4.2
3.1
2.5
12.7
8.9
6.3
4.6
3.8
19.0
13.4
9.4
6.9
5.7
31.7
22.3
15.7
11.4
9.5
52.9
37.2
26.2
19.1
15.8
NOTE:
(1) At temperatures over 538°C, use only when the carbon content is 0.04% or higher.
48
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.1 Pressure–Temperature Ratings for Group 3.1 Materials
Nominal Designation
35Ni 35Fe 20Cr Cb
Forgings
Castings
B462 Gr. N08020 (1)
Plates
...
B463 Gr. N08020 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
375
400
425
20.0
19.5
17.7
15.8
13.8
12.1
10.2
9.3
8.4
7.4
6.5
5.5
51.7
51.7
50.9
48.9
47.2
45.5
42.9
41.4
40.3
38.9
36.5
35.2
68.9
68.9
67.8
65.3
62.9
60.7
57.0
55.0
53.6
51.6
48.9
46.5
103.4
103.4
101.7
97.9
94.3
91.0
85.7
82.6
80.4
77.6
73.3
70.0
155.1
155.1
152.6
146.8
141.5
136.5
128.6
124.0
120.7
116.5
109.8
105.1
258.6
258.6
254.4
244.7
235.8
227.5
214.4
206.6
201.1
194.1
183.1
175.1
430.9
430.9
423.9
407.8
392.9
379.2
357.1
344.3
335.3
323.2
304.9
291.6
NOTE:
(1) Use annealed material only.
Table 2-3.2 Pressure–Temperature Ratings for Group 3.2 Materials
(13)
Nominal Designation
Forgings
Castings
Plates
99.0Ni
B564 Gr. N02200 (1)
...
B162 Gr. N02200 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
12.7
12.7
12.7
12.7
12.7
12.1
10.2
7.2
33.1
33.1
33.1
33.1
33.1
31.6
29.2
18.8
44.1
44.1
44.1
44.1
44.1
42.1
39.0
25.0
66.2
66.2
66.2
66.2
66.2
63.2
58.5
37.6
99.3
99.3
99.3
99.3
99.3
94.8
87.7
56.4
165.5
165.5
165.5
165.5
165.5
158.0
146.2
93.9
275.8
275.8
275.8
275.8
275.8
263.4
243.7
156.5
NOTE:
(1) Use annealed material only.
49
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.3 Pressure–Temperature Ratings for Group 3.3 Materials
Nominal Designation
Forgings
Castings
99.0Ni Low C
...
...
Plates
B162 Gr. N02201 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
6.3
6.3
6.1
6.0
16.5
16.4
15.8
15.6
22.1
21.9
21.1
20.7
33.1
32.8
31.7
31.1
49.6
49.2
47.5
46.7
82.7
82.0
79.2
77.8
137.9
136.7
132.0
129.6
200
250
300
325
350
375
6.0
6.0
6.0
5.9
5.9
5.9
15.6
15.6
15.6
15.5
15.4
15.4
20.7
20.7
20.7
20.7
20.5
20.5
31.1
31.1
31.1
31.0
30.8
30.7
46.7
46.7
46.7
46.5
46.2
46.1
77.8
77.8
77.8
77.5
76.9
76.8
129.6
129.6
129.6
129.2
128.2
128.0
400
425
450
475
500
5.8
5.5
4.6
3.7
2.8
15.2
14.9
14.6
14.3
13.8
20.3
19.9
19.5
19.1
18.4
30.4
29.8
29.2
28.6
27.6
45.6
44.7
43.8
43.0
41.4
76.1
74.6
73.1
71.6
69.0
126.8
124.3
121.8
119.3
115.1
538
550
575
600
625
650
1.4
...
...
...
...
...
13.1
9.8
5.4
4.4
3.4
2.8
17.4
13.1
7.1
5.9
4.6
3.8
26.1
19.6
10.7
8.9
6.9
5.7
39.2
29.5
16.1
13.3
10.3
8.5
65.4
49.1
26.8
22.2
17.2
14.2
108.9
81.8
44.6
37.0
28.7
23.6
NOTE:
(1) Use annealed material only.
Table 2-3.4 Pressure–Temperature Ratings for Group 3.4 Materials
Nominal Designation
67Ni 30Cu
Forgings
Castings
B564 Gr. N04400 (1)
Plates
...
B127 Gr. N04400 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
375
400
425
450
475
15.9
15.4
13.8
12.9
12.5
12.1
10.2
9.3
8.4
7.4
6.5
5.5
4.6
3.7
41.4
40.2
35.9
33.7
32.7
32.6
32.6
32.6
32.6
32.4
32.1
31.6
26.9
20.8
55.2
53.7
47.9
45.0
43.6
43.5
43.5
43.5
43.4
43.2
42.8
42.2
35.9
27.7
82.7
80.5
71.9
67.5
65.4
65.2
65.2
65.2
65.1
64.8
64.2
63.3
53.8
41.5
124.1
120.7
107.8
101.2
98.1
97.8
97.8
97.8
97.7
97.2
96.2
94.9
80.7
62.3
206.8
201.2
179.7
168.7
163.5
163.0
163.0
163.0
162.8
161.9
160.4
158.2
134.5
103.8
344.7
335.3
299.5
281.1
272.4
271.7
271.7
271.7
271.3
269.9
267.4
263.6
224.2
173.0
NOTE:
(1) Use annealed material only.
50
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.5 Pressure–Temperature Ratings for Group 3.5 Materials
Nominal Designation
Forgings
Castings
72Ni 15Cr 8Fe
B564 Gr. N06600 (1)
...
Plates
B168 Gr.
N06600 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
20.0
19.5
17.7
15.8
13.8
51.7
51.7
51.5
50.3
48.6
68.9
68.9
68.7
66.8
64.8
103.4
103.4
103.0
100.3
97.2
155.1
155.1
154.6
150.6
145.8
258.6
258.6
257.6
250.8
243.4
430.9
430.9
429.4
418.2
405.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
46.3
42.9
41.4
40.3
38.9
61.7
57.0
55.0
53.6
51.6
92.7
85.7
82.6
80.4
77.6
139.0
128.6
124.0
120.7
116.5
231.8
214.4
206.6
201.1
194.1
386.2
357.1
344.3
335.3
323.2
400
425
450
475
500
6.5
5.5
4.6
3.7
2.8
36.5
35.2
33.7
31.7
28.2
48.9
46.5
45.1
42.3
37.6
73.3
70.0
67.7
63.4
56.5
109.8
105.1
101.4
95.1
84.7
183.1
175.1
169.0
158.2
140.9
304.9
291.6
281.8
263.9
235.0
538
550
575
600
625
650
1.4
...
...
...
...
...
16.5
13.9
9.4
6.6
5.1
4.7
22.1
18.6
12.6
8.9
6.8
6.3
33.1
27.9
18.9
13.3
10.3
9.5
49.6
41.8
28.3
19.9
15.4
14.2
82.7
69.7
47.2
33.2
25.7
23.6
137.9
116.2
78.6
55.3
42.8
39.4
NOTE:
(1) Use annealed material only.
51
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.6 Pressure–Temperature Ratings for Group 3.6 Materials
Nominal Designation
Forgings
33Ni 42Fe 21Cr
Castings
B564 Gr.
N08800 (1)
...
Plates
B409 Gr.
N08800 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.0
18.7
17.5
15.8
13.8
12.1
49.6
48.8
45.6
44.0
42.8
41.7
66.2
65.1
60.8
58.7
57.1
55.7
99.3
97.6
91.2
88.0
85.6
83.5
148.9
146.4
136.9
132.0
128.4
125.2
248.2
244.0
228.1
219.9
214.0
208.7
413.7
406.7
380.1
366.6
356.7
347.9
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
40.8
40.3
39.8
38.9
36.5
35.2
54.4
53.8
53.0
51.6
48.9
46.5
81.6
80.6
79.5
77.6
73.3
70.0
122.5
120.9
119.3
116.5
109.8
105.1
204.1
201.6
198.8
194.1
183.1
175.1
340.2
336.0
331.3
323.2
304.9
291.6
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
33.7
31.7
28.2
25.2
25.0
24.0
45.1
42.3
37.6
33.4
33.3
31.9
67.7
63.4
56.5
50.0
49.8
47.9
101.4
95.1
84.7
75.2
74.8
71.8
169.0
158.2
140.9
125.5
124.9
119.7
281.8
263.9
235.0
208.9
208.0
199.5
600
625
650
675
700
...
...
...
...
...
21.6
18.3
14.1
10.3
5.6
28.6
24.3
18.9
13.7
7.4
42.9
36.6
28.1
20.5
11.1
64.2
54.9
42.5
30.8
16.7
107.0
91.2
70.7
51.3
27.8
178.5
152.0
117.7
85.6
46.3
725
750
775
800
816
...
...
...
...
...
4.0
3.0
2.5
2.2
1.9
5.4
4.0
3.3
2.9
2.5
8.1
6.1
4.9
4.3
3.8
12.1
9.1
7.4
6.5
5.7
20.1
15.1
12.4
10.8
9.5
33.6
25.2
20.6
18.0
15.8
NOTE:
(1) Use annealed material only.
52
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.7 Pressure–Temperature Ratings for Group 3.7 Materials
Nominal Designation
Forgings
65Ni 28Mo 2Fe
Castings
B462 Gr.
N10665 (1)
B462 Gr.
N10675 (1)
64Ni 29.5Mo 2Cr 2Fe Mn W
...
...
Plates
B333 Gr.
N10665 (1)
B333 Gr.
N10675 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
375
400
425
20.0
19.5
17.7
15.8
13.8
12.1
10.2
9.3
8.4
7.4
6.5
5.5
51.7
51.7
51.5
50.3
48.6
46.3
42.9
41.4
40.3
38.9
36.5
35.2
68.9
68.9
68.7
66.8
64.8
61.7
57.0
55.0
53.6
51.6
48.9
46.5
103.4
103.4
103.0
100.3
97.2
92.7
85.7
82.6
80.4
77.6
73.3
70.0
155.1
155.1
154.6
150.6
145.8
139.0
128.6
124.0
120.7
116.5
109.8
105.1
258.6
258.6
257.6
250.8
243.4
231.8
214.4
206.6
201.1
194.1
183.1
175.1
430.9
430.9
429.4
418.2
405.4
386.2
357.1
344.3
335.3
323.2
304.9
291.6
NOTE:
(1) Use solution annealed material only.
53
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.8 Pressure–Temperature Ratings for Group 3.8 Materials
Nominal Designation
Forgings
Castings
Plates
54Ni 16Mo 15Cr
B462 Gr. N10276
(1), (2)
...
B575 Gr. N10276 (1), (2)
60Ni 22Cr 9Mo 3.5Cb
B564 Gr. N06625
(3) (5)
...
B443 Gr. N06625 (3) (5)
62Ni 28Mo 5Fe
...
...
B333 Gr. N10001 (1), (6)
70Ni 16Mo 7Cr 5Fe
...
...
B434 Gr. N10003 (3)
61Ni 16Mo 16Cr
...
...
B575 Gr. N06455 (1), (6)
42Ni 21.5Cr 3Mo 2.3Cu
B564 Gr. N08825
(3), (7)
...
B424 Gr. N08825 (3), (7)
55Ni 21Cr 13.5Mo
B462 Gr. N06022
(1), (2), (8)
...
B575 Gr. N06022 (1), (2), (8)
55Ni 23Cr 16Mo 1.6Cu
B462 Gr. N06200
(1), (6)
...
B575 Gr. N06200 (1), (6)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
20.0
19.5
17.7
15.8
13.8
12.1
51.7
51.7
51.5
50.3
48.3
46.3
68.9
68.9
68.7
66.8
64.5
61.7
103.4
103.4
103.0
100.3
96.7
92.7
155.1
155.1
154.6
150.6
145.0
139.0
258.6
258.6
257.6
250.8
241.7
231.8
430.9
430.9
429.4
418.2
402.8
386.2
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
42.9
41.4
40.3
38.9
36.5
35.2
57.0
55.0
53.6
51.6
48.9
46.5
85.7
82.6
80.4
77.6
73.3
70.0
128.6
124.0
120.7
116.5
109.8
105.1
214.4
206.6
201.1
194.1
183.1
175.1
357.1
344.3
335.3
323.2
304.9
291.6
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
33.7
31.7
28.2
25.2
25.0
24.0
45.1
42.3
37.6
33.4
33.3
31.9
67.7
63.4
56.5
50.0
49.8
47.9
101.4
95.1
84.7
75.2
74.8
71.8
169.0
158.2
140.9
125.5
124.9
119.7
281.8
263.9
235.0
208.9
208.0
199.5
600
625
650
675
700
...
...
...
...
...
21.6
18.3
14.1
11.5
8.8
28.6
24.3
18.8
15.4
11.7
42.9
36.6
28.1
23.0
17.5
64.2
54.9
42.2
34.6
26.3
107.0
91.2
70.4
57.6
43.8
178.5
152.0
117.3
96.0
73.0
NOTES:
(1) Use solution annealed material only.
(2) Not to be used over 675°C.
(3) Use annealed material only.
(4) Not to be used over 645°C. Alloy N06625 in the annealed condition is subject to severe loss of
impact strength at room temperatures after exposure in the range of 538°C to 760°C.
(5) Grade 1.
(6) Not to be used over 425°C.
(7) Not to be used over 538°C.
(8) Alloy N06022 in the solution annealed condition is subject to severe loss of impact strength at
room temperature after exposure to temperatures in the range of 538°C to 675°C.
54
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.9 Pressure–Temperature Ratings for Group 3.9 Materials
Nominal Designation
47Ni 22Cr 9Mo 18Fe
21Ni 30Fe 22Cr 18Co 3Mo 3W
Forgings
Castings
B572 Gr. N06002
(1), (2)
B572 Gr. R30556
(1), (2)
...
...
Plates
B435 Gr.
N06002 (1)
B435 Gr.
R30556 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
20.0
19.5
17.7
15.8
13.8
12.1
51.7
51.7
51.5
47.6
44.3
41.6
68.9
68.9
68.7
63.4
59.1
55.4
103.4
103.4
103.0
95.2
88.6
83.1
155.1
155.1
154.6
142.8
132.9
124.7
258.6
258.6
257.6
237.9
221.5
207.9
430.9
430.9
429.4
396.5
369.2
346.4
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
39.5
38.6
37.9
37.3
36.5
35.2
52.7
51.5
50.5
49.8
48.9
46.5
79.0
77.2
75.8
74.7
73.3
70.0
118.5
115.8
113.7
112.0
109.8
105.1
197.4
193.0
189.5
186.6
183.1
175.1
329.1
321.7
315.8
311.1
304.9
291.6
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
33.7
31.7
28.2
25.2
25.0
24.0
45.1
42.3
37.6
33.4
33.3
31.9
67.7
63.4
56.5
50.0
49.8
47.9
101.4
95.1
84.7
75.2
74.8
71.8
169.0
158.2
140.9
125.5
124.9
119.7
281.8
263.9
235.0
208.9
208.0
199.5
600
625
650
675
700
...
...
...
...
...
21.6
18.3
14.1
12.4
10.1
28.6
24.3
18.9
16.9
13.4
42.9
36.6
28.1
25.2
20.0
64.2
54.9
42.5
37.6
29.8
107.0
91.2
70.7
62.7
49.7
178.5
152.0
117.7
104.5
83.0
725
750
775
800
816
...
...
...
...
...
7.9
5.9
4.6
3.5
2.8
10.5
7.9
6.2
4.8
3.8
15.4
11.7
9.0
7.0
5.9
23.2
17.6
13.7
10.5
8.6
38.6
29.6
22.8
17.4
14.1
64.4
49.1
38.0
29.2
23.8
NOTES:
(1) Use solution annealed material only.
(2) The chemical composition, mechanical properties, heat treating requirements, and grain size
requirements shall conform to the applicable ASTM specification. The manufacturing procedures,
tolerances, tests, certification, and markings shall be in accordance with ASTM B564.
55
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.10
Pressure–Temperature Ratings for Group 3.10 Materials
Nominal Designation
Forgings
Castings
25Ni 47Fe 21Cr 5Mo
...
...
Plates
B599 Gr. N08700 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
20.0
19.5
17.7
15.8
13.8
12.1
10.2
9.3
8.4
51.7
51.7
51.5
47.1
44.3
42.8
41.3
40.4
38.9
68.9
68.9
68.7
62.8
59.0
57.1
55.1
53.8
51.9
103.4
103.4
103.0
94.2
88.5
85.6
82.7
80.7
77.8
155.1
155.1
154.6
141.3
132.8
128.4
124.0
121.1
116.7
258.6
258.6
257.6
235.5
221.3
214.0
206.7
201.8
194.5
430.9
430.9
429.4
392.5
368.9
356.6
344.5
336.4
324.2
NOTE:
(1) Use solution annealed material only.
Table 2-3.11
Pressure–Temperature Ratings for Group 3.11 Materials
Nominal Designation
Forgings
Castings
44Fe 25Ni 21Cr Mo
A479 Gr. N08904
(1), (2)
...
Plates
A240 Gr.
N08904 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
375
19.7
18.8
15.7
14.4
13.3
12.1
10.2
9.3
8.4
7.4
51.3
49.1
41.1
37.5
34.7
32.0
30.0
29.2
28.7
28.2
68.4
65.5
54.7
50.0
46.2
42.6
40.0
39.0
38.2
37.7
102.6
98.3
82.1
75.0
69.3
64.0
60.0
58.5
57.3
56.5
153.9
147.4
123.2
112.5
104.0
95.9
90.0
87.7
86.0
84.7
256.5
245.7
205.3
187.5
173.4
159.9
150.1
146.1
143.4
141.2
427.5
409.6
342.1
312.5
288.9
266.5
250.1
243.6
238.9
235.4
NOTES:
(1) Use annealed materiel only.
(2) The chemical composition, mechanical properties, heat treating requirements, and grain size
requirements shall conform to the applicable ASTM specification. The manufacturing procedures,
tolerances, tests, certification, and markings shall be in accordance with ASTM B564.
56
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.12
Pressure–Temperature Ratings for Group 3.12 Materials
Nominal Designation
Forgings
Castings
26Ni 43Fe 22Cr 5Mo
...
...
B620 Gr.
N08320 (1)
47Ni 22Cr 20Fe 7Mo
...
...
B582 Gr.
N06985 (1)
46Fe 24Ni 21Cr 6Mo Cu N
B462 Gr.
N08367 (1)
A351 Gr.
CN3MN (1)
Plates
B688 Gr.
N08367 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
375
400
425
17.8
17.5
16.3
15.4
13.8
12.1
10.2
9.3
8.4
7.4
6.5
5.5
46.3
45.6
42.5
40.1
37.3
34.9
33.1
32.3
31.6
31.0
30.4
29.8
61.8
60.8
56.7
53.5
49.8
46.5
44.1
43.1
42.1
41.4
40.6
39.8
92.7
91.1
85.1
80.3
74.6
69.8
66.2
64.6
63.2
62.0
60.8
59.7
139.0
136.7
127.6
120.4
112.0
104.7
99.3
97.0
94.8
93.0
91.3
89.5
231.7
227.8
212.7
200.7
186.6
174.5
165.5
161.6
158.1
155.1
152.1
149.1
386.1
379.7
354.5
334.6
311.0
290.8
275.9
269.3
263.4
258.5
253.5
248.5
NOTE:
(1) Use solution annealed material only.
57
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.13
Pressure–Temperature Ratings for Group 3.13 Materials
Nominal Designation
Forgings
Castings
...
...
B582 Gr.
N06975 (1)
...
B625 Gr.
N08031 (2)
49Ni 25Cr 18Fe 6Mo
Ni Fe Cr Mo Cu Low C
B564 Gr.
N08031 (2)
Plates
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
350
375
400
425
20.0
19.5
17.7
15.8
13.8
12.1
10.2
9.3
8.4
7.4
6.5
5.5
51.7
51.7
48.2
45.8
43.6
41.5
39.4
38.4
37.7
37.2
36.5
35.2
68.9
68.9
64.2
61.0
58.1
55.3
52.5
51.3
50.3
49.5
48.9
46.5
103.4
103.4
96.3
91.6
87.1
82.9
78.7
76.9
75.5
74.3
73.3
70.0
155.1
155.1
144.5
137.4
130.7
124.4
118.1
115.3
113.2
111.5
109.8
105.1
258.6
258.6
240.8
228.9
217.8
207.3
196.8
192.2
188.7
185.8
183.1
175.1
430.9
430.9
401.4
381.6
362.9
345.5
328.1
320.3
314.5
309.7
304.9
291.6
NOTES:
(1) Use solution annealed material only.
(2) Use annealed material only.
58
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.14
Pressure–Temperature Ratings for Group 3.14 Materials
Nominal Designation
Forgings
47Ni 22Cr 19Fe 6Mo
Castings
Plates
...
...
B582 Gr. N06007 (1)
58Ni 33Cr 8Mo
B462 Gr. N06035 (1), (2)
...
B575 Gr. N06035 (1), (2)
40Ni 29Cr 15Fe 5Mo
B462 Gr. N06030 (1), (2)
...
B582 Gr. N06030 (1), (2)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
19.0
18.6
17.0
15.8
13.8
49.6
48.6
44.3
41.3
39.1
66.2
64.7
59.0
55.1
52.1
99.3
97.1
88.6
82.6
78.2
148.9
145.7
132.8
124.0
117.3
248.2
242.8
221.4
206.6
195.4
413.7
404.6
369.0
344.3
325.7
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
37.4
36.1
35.6
35.2
34.9
49.9
48.2
47.4
46.9
46.5
74.8
72.2
71.1
70.3
69.7
112.2
108.3
106.7
105.5
104.6
187.0
180.6
177.9
175.8
174.3
311.6
300.9
296.4
293.1
290.6
400
425
450
475
500
538
6.5
5.5
4.6
3.7
2.8
1.4
34.6
34.4
33.7
31.7
28.2
25.2
46.1
45.9
45.1
42.3
37.6
33.4
69.2
68.9
67.7
63.4
56.5
50.0
103.7
103.3
101.4
95.1
84.7
75.2
172.9
172.1
169.0
158.2
140.9
125.5
288.1
286.9
281.8
263.9
235.0
208.9
NOTES:
(1) Use solution annealed material only.
(2) Not to be used over 425°C.
59
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.15
Pressure–Temperature Ratings for Group 3.15 Materials
Nominal Designation
33Ni 42Fe 21Cr
Forgings
Castings
B564 Gr. N08810 (1)
Plates
...
B409 Gr. N08810 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
15.9
15.6
14.5
13.7
13.0
12.1
41.4
40.6
37.8
35.9
33.9
32.3
55.2
54.2
50.4
47.8
45.2
43.0
82.7
81.3
75.6
71.7
67.9
64.5
124.1
121.9
113.4
107.6
101.8
96.8
206.8
203.2
189.0
179.3
169.6
161.3
344.7
338.7
315.0
298.9
282.7
268.9
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
30.7
30.1
29.4
28.7
28.3
27.7
41.0
40.1
39.2
38.3
37.7
36.9
61.5
60.1
58.8
57.4
56.5
55.3
92.2
90.2
88.3
86.2
84.8
83.0
153.7
150.3
147.1
143.6
141.3
138.4
256.2
250.5
245.2
239.4
235.6
230.6
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
27.2
26.8
26.3
25.2
25.0
24.0
36.3
35.7
35.1
33.4
33.3
31.9
54.4
53.5
52.6
50.0
49.8
47.9
81.7
80.3
79.0
75.2
74.8
71.8
136.1
133.9
131.6
125.5
124.9
119.7
226.8
223.1
219.4
208.9
208.0
199.5
600
625
650
675
700
...
...
...
...
...
21.6
18.3
14.1
12.4
10.1
28.6
24.3
18.9
16.9
13.4
42.9
36.6
28.1
25.2
20.0
64.2
54.9
42.5
37.6
29.8
107.0
91.2
70.7
62.7
49.7
178.5
152.0
117.7
104.5
83.0
725
750
775
800
816
...
...
...
...
...
7.9
5.9
4.6
3.5
2.8
10.5
7.9
6.2
4.8
3.8
15.4
11.7
9.0
7.0
5.9
23.2
17.6
13.7
10.5
8.6
38.6
29.6
22.8
17.4
14.1
64.4
49.1
38.0
29.2
23.8
NOTE:
(1) Use solution annealed material only.
60
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.16
Pressure–Temperature Ratings for Group 3.16 Materials
Nominal Designation
35Ni 19Cr 11⁄4Si
Forgings
Castings
...
...
Plates
B536 Gr. N08330 (1)
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
19.0
18.5
16.7
15.6
13.8
12.1
49.6
48.4
43.5
40.8
38.6
36.8
66.2
64.5
58.0
54.4
51.5
49.0
99.3
96.7
87.0
81.6
77.2
73.5
148.9
145.1
130.5
122.5
115.8
110.3
248.2
241.8
217.5
204.1
192.9
183.8
413.7
403.1
362.4
340.2
321.6
306.3
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
35.2
34.5
33.9
33.2
32.6
32.0
47.0
46.0
45.2
44.2
43.4
42.6
70.4
69.0
67.8
66.3
65.1
64.0
105.6
103.6
101.7
99.5
97.7
95.9
176.1
172.6
169.4
165.8
162.9
159.9
293.4
287.7
282.4
276.4
271.4
266.5
450
475
500
538
550
575
4.6
3.7
2.8
1.4
...
...
31.4
30.8
28.2
25.2
25.0
21.9
41.8
41.0
37.6
33.4
33.3
29.2
62.8
61.6
56.5
50.0
49.8
43.7
94.1
92.4
84.7
75.2
74.8
65.6
156.9
153.9
140.9
125.5
124.9
109.4
261.5
256.5
235.0
208.9
208.0
182.3
600
625
650
675
700
725
...
...
...
...
...
...
17.4
13.8
11.0
9.1
7.6
6.1
23.2
18.3
14.7
12.1
10.1
8.1
34.8
27.5
22.1
18.2
15.2
12.2
52.3
41.3
33.1
27.3
22.8
18.3
87.1
68.8
55.1
45.6
38.0
30.5
145.1
114.6
91.9
75.9
63.3
50.9
750
775
800
816
...
...
...
...
4.8
3.9
3.1
2.6
6.4
5.2
4.2
3.5
9.5
7.7
6.3
5.2
14.3
11.6
9.4
7.8
23.8
19.4
15.6
13.0
39.7
32.3
26.1
21.7
NOTE:
(1) Use solution annealed material only.
61
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 2-3.17
Pressure–Temperature Ratings for Group 3.17 Materials
Nominal Designation
Forgings
29Ni 20.5Cr 3.5Cu 2.5Mo
...
Castings
Plates
A351 Gr. CN7M (1)
...
Working Pressures by Classes, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
300
325
15.9
15.4
13.5
12.3
11.3
10.4
9.7
9.3
41.4
40.1
35.3
32.0
29.4
27.2
25.4
24.4
55.2
53.5
47.1
42.7
39.1
36.3
33.8
32.6
82.7
80.3
70.6
64.1
58.7
54.4
50.8
48.8
124.1
120.4
105.9
96.1
88.1
81.7
76.1
73.3
206.8
200.7
176.5
160.2
146.8
136.1
126.9
122.1
344.7
334.4
294.2
267.0
244.7
226.9
211.5
203.5
NOTE:
(1) Use solution annealed material only.
Table 2-3.19
Pressure–Temperature Ratings for Group 3.19 Materials
Nominal Designation
Forgings
Castings
Plates
57Ni 22Cr 14W 2Mo La
B564 Gr. N06230
...
B435 Gr. N06230
Working Pressures by Class, bar
Class
Temp., °C
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
250
20.0
19.5
17.7
15.8
13.8
12.1
51.7
51.7
51.5
50.3
48.6
46.3
68.9
68.9
68.7
66.8
64.8
61.7
103.4
103.4
103.0
100.3
97.2
92.7
155.1
155.1
154.6
150.6
145.8
139.0
258.6
258.6
257.6
250.8
243.4
231.8
430.9
430.9
429.4
418.2
405.4
386.2
300
325
350
375
400
425
10.2
9.3
8.4
7.4
6.5
5.5
42.9
41.4
40.3
38.9
36.5
35.2
57.0
55.0
53.6
51.6
48.9
46.5
85.7
82.6
80.4
77.6
73.3
70.0
128.6
124.0
120.7
116.5
109.8
105.1
214.4
206.6
201.1
194.1
183.1
175.1
357.1
344.3
335.3
323.2
304.9
291.6
450
475
500
538
550
575
4.6
3.7
2.8
1.4
1.4
1.4
33.7
31.7
28.2
25.2
25.0
24.0
45.1
42.3
37.6
33.4
33.3
31.9
67.7
63.4
56.5
50.0
49.8
47.9
101.4
95.1
84.7
75.2
74.8
71.8
169.0
158.2
140.9
125.5
124.9
119.7
281.8
263.9
235.0
208.9
208.0
199.5
600
625
650
675
700
725
1.4
1.4
1.4
1.4
1.4
1.4
21.6
18.3
14.1
12.4
10.1
7.9
28.6
24.3
18.9
16.9
13.4
10.5
42.9
36.6
28.1
25.2
20.0
15.4
64.2
54.9
42.5
37.6
29.8
23.2
107.0
91.2
70.7
62.7
49.7
38.6
178.5
152.0
117.7
104.5
83.0
64.4
750
775
800
816
1.4
1.4
1.4
1.4
5.9
4.6
3.5
2.8
7.9
6.2
4.8
3.8
11.5
9.0
7.0
5.9
17.6
13.7
10.5
8.6
29.6
22.8
17.4
14.1
49.1
38.0
29.2
23.8
62
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 3 Permissible Imperfections in Flange Facing Finish for Raised Face
and Large Male and Female Flanges
Maximum Radial Projection of Imperfections
That Are No Deeper Than the Bottom of the
Serrations, mm
Maximum Depth and Radial Projection of
Imperfections That Are Deeper Than the
Bottom of the Serrations, mm
⁄2
⁄4
1
11⁄4
11⁄2
3.0
3.0
3.0
3.0
3.0
1.5
1.5
1.5
1.5
1.5
2
21⁄2
3
31⁄2
4
3.0
3.0
4.5
6.0
6.0
1.5
1.5
1.5
3.0
3.0
5
6
8
10
12
6.0
6.0
8.0
8.0
8.0
3.0
3.0
4.5
4.5
4.5
14
16
18
20
24
8.0
10.0
12.0
12.0
12.0
4.5
4.5
6.0
6.0
6.0
NPS
1
3
GENERAL NOTE:
For permissible imperfections in inch units, refer to Mandatory Appendix II, Table II 3.
63
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
Table 4
1
2
3
4
Dimensions of Facings (Other Than Ring Joints, All Pressure Rating Classes)
5
6
7
8
9
10
11
12
13
Small
Male,
S
[Note (1)]
⁄2
⁄4
1
11⁄4
11⁄2
34.9
42.9
50.8
63.5
73.0
2
21⁄2
3
31⁄2
4
Outside Diameter
Small
Groove,
Y
Inside
Diameter
of Large
and
Small
Groove,
Z
19.9
25.4
31.8
39.7
46.0
36.5
44.4
49.2
58.7
65.1
93.7
106.4
128.6
141.3
158.8
58.8
69.8
85.7
98.4
111.1
...
...
...
...
...
187.3
217.5
271.5
325.4
382.6
...
...
...
...
...
414.3
471.5
535.0
585.8
693.7
Small
Tongue,
T
Inside
Diameter
of Large
and
Small
Tongue,
U
Inside
Diameter
of Small
Tongue
[Note
(1)]
Large
Female
and
Large
Groove,
W
Small
Female,
X
[Note (1)]
18.3
23.8
30.2
38.1
44.4
35.1
42.9
47.8
57.2
63.5
25.4
33.3
38.1
47.6
54.0
...
...
...
...
...
36.5
44.4
52.4
65.1
74.6
92.1
104.8
127.0
139.7
157.2
57.2
68.3
84.1
96.8
109.5
82.6
95.2
117.5
130.2
144.5
73.0
85.7
108.0
120.6
131.8
...
...
...
...
...
5
6
8
10
12
185.7
215.9
269.9
323.8
381.0
136.5
161.9
212.7
266.7
317.5
173.0
203.2
254.0
304.8
362.0
160.3
190.5
238.1
285.8
342.9
14
16
18
20
24
412.8
469.9
533.4
584.2
692.2
349.2
400.0
450.8
501.6
603.2
393.7
447.5
511.2
558.8
666.8
374.6
425.4
489.0
533.4
641.4
1
3
Height
15
1
Minimum
Outside Diameter
of Raised Portion
[Notes (6), (7)]
Raised
Face
[Notes
(2), (3)]
Large
and Small
Male and
Tongue
[Notes
(2), (4)]
Depth of
Groove
or
Female
[Notes
(2), (5)]
Small
Female
and
Groove,
K
23.8
31.8
36.5
46.0
52.4
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
44
52
57
67
73
46
54
62
75
84
⁄2
⁄4
1
11⁄4
11⁄2
84.1
96.8
119.1
131.8
146.0
71.4
84.1
106.4
119.1
130.2
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
92
105
127
140
157
103
116
138
151
168
2
21⁄2
3
31⁄2
4
138.1
163.5
214.3
268.3
319.1
174.6
204.8
255.6
306.4
363.5
158.8
188.9
236.5
284.2
341.3
...
...
...
...
...
...
...
...
...
...
...
...
186
216
270
324
381
197
227
281
335
392
5
6
8
10
12
350.8
401.6
452.4
503.2
604.8
395.3
449.3
512.8
560.4
668.3
373.1
423.9
487.4
531.8
639.8
...
...
...
...
...
...
...
...
...
413
470
533
584
692
424
481
544
595
703
14
16
18
20
24
Large
Female
and
Groove,
L
Nominal
Size,
NPS
1
3
ASME B16.5-2013
Raised
Face
Large
Male
and
Large
Tongue,
R
Nominal
Size,
NPS
64
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Outside Diameter
14
Dimensions of Facings (Other Than Ring Joints, All Pressure Rating Classes) (Cont’d)
GENERAL NOTES:
(a) Dimensions are in millimeters. For dimensions in inch units, refer to Table -4 of Mandatory Appendix .
(b) For facing requirements for flanges and flanged fittings, see paras. 6.3 and 6.4 and Fig. 6.
(c) For facing requirements for lapped joints, see para. 6.4.3 and Fig. 6.
(d) For facing tolerances, see para. 7.3.
NOTES:
(1) For small male and female joints, care should be taken in the use of these dimensions to ensure that the inside diameter of the fitting or pipe is small enough to permit sufficient
bearing surface to prevent the crushing of the gasket. This applies particularly on lines where the joint is made on the end of the pipe. The inside diameter of the fitting should
match the inside diameter of the pipe as specified by the purchaser. Threaded companion flanges for small male and female joints are furnished with plain face and are threaded
with American National Standard Locknut Thread (NPSL).
(2) See para. 6.4.3 and Fig. 6 for thickness and outside diameters of laps.
(3) The height of the raised face is either 2 mm or 7 mm (see para. 6.4.1).
(4) The height of the large and small male and tongue is 7 mm.
(5) The depth of the groove or female is 5 mm.
(6) The raised portion of the full face may be furnished unless otherwise specified on order.
(7) Large male and female faces and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
ASME B16.5-2013
65
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 4
ASME B16.5-2013
Table 5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes)
(13)
1
2
3
4
5
6
7
8
Nominal Size
9
10
11
12
Groove Dimensions
Groove
Number
Pitch
Diameter,
P
Depth, E
[Note (1)]
Width,
F
Radius
at
Bottom,
R
...
...
1
⁄2
...
...
R11
12
13
14
15
34.14
39.67
42.88
44.45
47.63
5.54
6.35
6.35
6.35
6.35
7.14
8.74
8.74
8.74
8.74
0.8
0.8
0.8
0.8
0.8
1
...
11⁄4
...
11⁄2
3
⁄4
...
1
...
...
16
17
18
19
20
50.80
57.15
60.33
65.07
68.27
6.35
6.35
6.35
6.35
6.35
8.74
8.74
8.74
8.74
8.74
0.8
0.8
0.8
0.8
0.8
...
...
...
...
...
...
...
...
2
...
11⁄4
...
11⁄2
...
...
21
22
23
24
25
72.23
82.55
82.55
95.25
101.60
7.92
6.35
7.92
7.92
6.35
11.91
8.74
11.91
11.91
8.74
0.8
0.8
0.8
0.8
0.8
21⁄2
...
...
...
[Note (4)]
...
...
...
...
...
...
21⁄2
...
...
...
2
...
21⁄2
...
...
26
27
28
29
30
101.60
107.95
111.13
114.30
117.48
7.92
7.92
9.53
6.35
7.92
11.91
11.91
13.49
8.74
11.91
0.8
0.8
1.5
0.8
0.8
...
...
...
...
...
3 [Note (4)]
...
...
31⁄2
...
3
...
...
...
...
...
...
...
...
3
...
3
...
...
...
31
32
33
34
35
123.83
127.00
131.78
131.78
136.53
7.92
9.53
6.35
7.92
7.92
11.91
13.49
8.74
11.91
11.91
0.8
1.5
0.8
0.8
0.8
...
4
...
...
...
...
4
...
...
...
...
4
...
...
...
...
4
...
...
...
...
...
...
4
...
...
...
4
...
...
36
37
38
39
40
149.23
149.23
157.18
161.93
171.45
6.35
7.92
11.13
7.92
6.35
8.74
11.91
16.66
11.91
8.74
0.8
0.8
1.5
0.8
0.8
...
...
6
...
...
5
...
...
...
6
5
...
...
...
6
5
...
...
...
6
5
...
...
...
6
...
...
...
5
...
...
5
...
...
...
41
42
43
44
45
180.98
190.50
193.68
193.68
211.12
7.92
12.70
6.35
7.92
7.92
11.91
19.84
8.74
11.91
11.91
0.8
1.5
0.8
0.8
0.8
...
...
8
...
...
...
...
8
...
...
...
8
...
...
...
8
...
...
...
8
6
...
...
...
...
6
...
...
46
47
48
49
211.14
228.60
247.65
269.88
9.53
12.70
6.35
7.92
13.49
19.84
8.74
11.91
1.5
1.5
0.8
0.8
Class
150
NPS
Class 300
NPS
Class 400
NPS
[Note (2)]
Class 600
NPS
Class 900
NPS
[Note (3)]
Class
1500
NPS
Class
2500
NPS
...
...
...
...
1
1
⁄2
...
3
⁄4
...
...
...
...
...
...
...
1
⁄2
...
3
⁄4
...
...
...
...
...
...
...
...
1
⁄2
...
3
⁄4
...
...
11⁄4
...
11⁄2
...
1
...
11⁄4
...
11⁄2
...
...
...
...
...
1
...
11⁄4
...
11⁄2
...
...
...
...
...
...
2
...
...
21⁄2
...
...
2
...
...
...
...
...
...
...
...
...
2
...
...
...
...
...
3
...
21⁄2
...
...
...
[Note (4)]
...
...
...
...
...
...
...
31⁄2
...
...
3 [Note (4)]
...
...
31⁄2
...
4
...
...
...
5
66
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes) (Cont’d)
13
14
15
16
17
18
19
Diameter of Raised Portion, K
20
21
22
(13)
23
24
Approximate Distance Between Flanges
Class
150
Class
300
400
600
Class
900
Class
1500
Class
2500
Class
150
Class
300
Class
400
Class
600
Class
900
Class
1500
Class
2500
...
...
...
...
63.5
51.0
...
63.5
...
...
...
...
...
...
...
...
60.5
...
66.5
...
...
...
65.0
...
...
...
...
...
...
4
3
...
4
...
...
...
...
...
...
...
3
...
4
...
...
...
...
...
...
...
...
4
...
4
...
...
...
4
...
...
...
73.0
...
82.5
...
70.0
...
79.5
...
90.5
...
...
...
...
...
71.5
...
81.0
...
92.0
73.0
...
82.5
...
...
...
4
...
4
...
4
...
4
...
4
...
...
...
...
...
4
...
4
...
4
...
...
...
...
...
4
...
4
...
4
4
...
4
...
...
...
102
...
...
121
...
...
108
...
...
...
...
...
...
...
...
...
...
124
...
102
...
114
...
...
...
4
...
...
4
...
...
6
...
...
...
...
...
...
...
...
...
5
...
...
...
...
...
...
...
...
...
...
3
...
3
...
3
...
...
...
...
...
133
...
127
...
...
...
...
...
...
...
...
...
...
137
...
...
...
133
...
149
...
...
...
...
...
4
...
6
...
...
...
...
...
...
...
...
...
5
...
...
...
...
...
...
...
...
...
...
3
...
...
...
3
...
3
...
...
...
...
154
...
...
146
...
...
159
...
156
...
...
...
...
...
...
...
...
168
...
168
...
...
...
...
...
4
...
...
6
...
...
6
...
...
...
...
...
...
5
...
...
5
...
4
...
...
...
...
...
...
...
...
3
...
3
...
...
...
171
...
...
...
194
...
175
...
...
...
...
181
...
...
...
...
...
...
194
...
...
...
203
...
...
4
...
...
...
4
...
6
...
...
...
...
6
...
...
...
...
5
...
...
...
...
4
...
...
...
...
...
...
3
...
...
...
4
...
...
...
...
219
...
...
210
...
...
...
241
216
...
...
...
241
...
...
...
229
...
...
241
...
...
...
...
...
4
...
...
6
...
...
...
6
6
...
...
...
6
5
...
...
...
5
4
...
...
...
4
...
...
...
3
...
...
4
...
...
...
...
...
273
...
...
...
...
302
...
...
...
308
248
...
...
...
...
279
...
...
...
...
4
...
...
...
...
6
...
...
...
6
...
...
...
5
...
...
...
4
3
...
...
...
...
4
...
...
67
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes) (Cont’d)
(13)
1
2
3
4
5
6
7
8
Nominal Size
Class
150
NPS
9
10
11
12
Groove Dimensions
Groove
Number
Pitch
Diameter,
P
Depth, E
[Note
(1)]
Width,
F
Radius
at
Bottom,
R
...
8
...
...
...
10
50
51
52
53
54
55
269.88
279.40
304.80
323.85
323.85
342.90
11.13
14.27
6.35
7.92
11.13
17.48
16.66
23.01
8.74
11.91
16.66
30.18
1.5
1.5
0.8
0.8
1.5
2.4
...
...
12
...
...
...
...
...
...
12
56
57
58
59
60
381.00
381.00
381.00
396.88
406.40
6.35
7.92
14.27
6.35
17.48
8.74
11.91
23.01
8.74
33.32
0.8
0.8
1.5
0.8
2.4
...
14
...
...
...
...
...
14
...
...
...
...
...
...
...
61
62
63
64
65
419.10
419.10
419.10
454.03
469.90
7.92
11.13
15.88
6.35
7.92
11.91
16.66
26.97
8.74
11.91
0.8
1.5
2.4
0.8
0.8
...
...
...
18
...
16
...
...
...
18
...
16
...
...
...
...
...
...
...
...
66
67
68
69
70
469.90
469.90
517.53
533.40
533.40
11.13
17.48
6.35
7.92
12.70
16.66
30.18
8.74
11.91
19.84
1.5
2.4
0.8
0.8
1.5
...
...
20
...
...
...
...
20
...
...
...
...
...
20
...
18
...
...
...
20
...
...
...
...
...
71
72
73
74
75
533.40
558.80
584.20
584.20
584.20
17.48
6.35
9.53
12.70
17.48
30.18
8.74
13.49
19.84
33.32
2.4
0.8
1.5
1.5
2.4
...
24
...
...
...
24
...
...
...
...
24
...
...
...
...
24
...
...
...
...
76
77
78
79
673.10
692.15
692.15
692.15
6.35
11.13
15.88
20.62
8.74
16.66
26.97
36.53
0.8
1.5
2.4
2.4
Class 300
NPS
Class 400
NPS
[Note (2)]
Class 600
NPS
Class 900
NPS
[Note (3)]
Class
1500
NPS
Class
2500
NPS
...
...
10
...
...
...
...
...
...
10
...
...
...
...
...
10
...
...
...
...
...
10
...
...
...
...
...
10
...
...
8
...
...
...
10
...
12
...
...
14
...
...
12
...
...
...
...
12
...
...
...
...
12
...
...
...
...
12
...
...
...
...
...
...
16
...
14
...
...
...
16
14
...
...
...
16
14
...
...
...
16
...
...
18
...
...
...
...
...
18
...
...
...
...
18
...
...
20
...
...
...
...
...
20
...
...
24
...
...
...
...
24
...
...
68
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes) (Cont’d)
13
14
15
16
17
18
19
Diameter of Raised Portion, K
20
21
22
(13)
23
24
Approximate Distance Between Flanges
Class
150
Class
300
400
600
Class
900
Class
1500
Class
2500
Class
150
Class
300
Class
400
Class
600
Class
900
Class
1500
Class
2500
...
...
330
...
...
...
...
...
...
356
...
...
...
...
...
362
...
...
318
...
...
...
371
...
...
340
...
...
...
425
...
...
4
...
...
...
...
...
...
6
...
...
...
...
...
6
...
...
...
...
...
5
...
...
...
...
...
4
...
...
4
...
...
...
4
...
...
5
...
...
...
6
406
...
...
425
...
...
413
...
...
...
...
419
...
...
...
...
...
438
...
...
...
...
...
...
495
4
...
...
3
...
...
6
...
...
...
...
6
...
...
...
...
5
...
...
...
...
4
...
...
...
...
...
5
...
...
...
...
...
...
8
...
...
...
483
...
457
...
...
...
508
...
467
...
...
...
...
...
489
...
...
...
...
...
...
...
...
...
...
3
...
6
...
...
...
6
6
...
...
...
6
5
...
...
...
5
...
4
...
...
...
...
...
6
...
...
...
...
...
...
...
...
...
546
...
...
...
...
...
575
...
524
...
...
...
594
...
546
...
...
...
...
...
...
...
...
...
...
3
...
...
...
...
...
6
...
...
...
...
6
...
...
...
...
5
...
4
...
...
...
5
...
8
...
...
...
...
...
...
...
...
...
597
...
...
...
...
...
635
...
...
...
...
...
648
...
613
...
...
...
673
...
...
...
...
...
...
3
...
...
...
...
...
6
...
...
...
...
6
...
...
...
...
5
...
...
...
...
...
5
...
8
...
...
...
10
...
...
...
...
...
711
...
...
...
...
749
...
...
...
...
772
...
...
...
...
794
...
...
...
...
3
...
...
...
...
6
...
...
...
6
...
...
...
6
...
...
...
...
6
...
...
...
...
11
...
...
...
...
GENERAL NOTES:
(a) Dimensions are in millimeters. For dimensions in inch units, refer to Table II 5 of Mandatory Appendix II.
(b) For facing requirements for flanges and flanged fitting, see para. 6.4.1 and Fig. 6.
(c) For facing requirements for lapped joints, see para. 6.4.3 and Fig. 6.
(d) See para. 4.2.7 for marking requirements.
NOTES:
(1) The height of the raised portion is equal to the depth of the groove dimension, E, but is not subjected to the tolerances for E. Former
full face contour may be used.
(2) Use Class 600 sizes NPS 1⁄2 to NPS 31⁄2 for Class 400.
(3) Use Class 1500 in sizes NPS 1⁄2 to NPS 21⁄2 for Class 900.
(4) For ring joints with lapped flanges in Classes 300 and 600, ring and groove number R30 is used instead of R31.
TOLERANCES:
E (depth) +0.40, 0.00
F (width) ±0.20
P (pitch diameter) ±0.13
R (radius at bottom)
R ≤ 2 + 0.8, 0.00
R > 2 ± 0.8
23 deg (angle) ± 1⁄2 deg
69
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 6 Reducing Threaded and Slip-On Pipe Flanges for Classes 150 Through 2500
(13)
Note (1)
Note (2)
Note (1)
Note (2)
Note (3)
Note (3)
Threaded
Blind Flange
X [Note (1)]
Slip-On Welding
1
2
3
4
Nominal
Pipe Size
[Note (4)]
Smallest Size
of Reducing
Outlet
Requiring Hub
Flanges
[Note (1)]
Nominal
Pipe Size
[Note (4)]
Smallest Size
of Reducing
Outlet
Requiring Hub
Flanges
[Note (1)]
NPS
NPS
NPS
NPS
NPS
NPS
31⁄2
4
5
6
8
10
11⁄2
11⁄2
11⁄2
21⁄2
3
31⁄2
12
14
16
18
20
24
31⁄2
31⁄2
4
4
4
4
1
11⁄4
11⁄2
2
21⁄2
3
1
⁄2
⁄2
1
⁄2
1
11⁄4
11⁄4
1
5
6
Nominal
Pipe Size
[Note (4)]
Smallest Size
of Reducing
Outlet
Requiring Hub
Flanges
[Note (1)]
GENERAL NOTE: Dimensions are in millimeters. For dimensions in inches, refer to Mandatory Appendix II, Table II 6.
NOTES:
(1) The hub dimensions shall be at least as large as those of the standard flanges of the size to which the reduction is being machined,
except flanges reducing to a size smaller than those of Columns 2, 4, and 6 may be made from blind flanges (see Example).
(2) Class 150 flanges do not have a counterbore. Class 300 and higher pressure flanges will have depth of counterbore Q of 7 mm for
NPS 2 and smaller tapping and 9.50 mm for NPS 21⁄2 and larger. The diameter Q of counterbore is the same as that given in the tables
of threaded flanges for the corresponding tapping.
(3) Minimum length of effective threads shall be at least equal dimension T of the corresponding pressure class threaded flange as shown
in tables but does not necessarily extend for the face of the flange. For thread of threaded flanges, see para. 6.9.
(4) For method of designating reducing threaded and reducing slip on flanges, see para. 3.3 and Examples below.
EXAMPLES:
(1) The size designation is NPS 6 ⴛ 21⁄2 Class 300 reducing threaded flange. This flange has the following dimensions:
NPS 21⁄2 p taper pipe thread tapping (ASME B1.20.1)
320 mm p diameter of regular NPS 6 Class 300 threaded flange
35 mm p thickness of regular NPS 6 Class 300 threaded flange
178 mm p diameter of hub for regular NPS 5 Class 300 threaded flange. Hub diameter may be one size small to reduce machin
ing. In this example, a hub diameter of NPS 21⁄2 would be the smallest acceptable.
15.5 mm p height of hub for regular NPS 5 Class 300 threaded flange
(2) The size designation is NPS 6 ⴛ 2 Class 300 reducing threaded flange. Use regular NPS 6 Class 300 blind flange tapped with NPS 2
taper pipe thread (ASME B1.20.1).
70
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 7 Templates for Drilling Class 150 Pipe Flanges and Flanged Fittings
(13)
L
O
W
Machine Bolt With Nuts
L
Flange
Point height [Note (1)]
Stud Bolt With Nuts
1
2
3
4
5
6
7
8
9
Length of Bolts,
L
[Note (4)]
Drilling [Notes (2), (3)]
Stud Bolts
[Note (1)]
Outside
Diameter
of
Flange,
O
Diameter
of Bolt
Circle,
W
⁄2
⁄4
1
11⁄4
11⁄2
90
100
110
115
125
60.3
69.9
79.4
88.9
98.4
5
⁄8
⁄8
5
⁄8
5
⁄8
5
⁄8
4
4
4
4
4
1
2
21⁄2
3
31⁄2
4
150
180
190
215
230
120.7
139.7
152.4
177.8
190.5
3
5
6
8
10
12
255
280
345
405
485
215.9
241.3
298.5
362.0
431.8
7
14
16
18
20
24
535
595
635
700
815
476.3
539.8
577.9
635.0
749.3
Nominal
Pipe
Size,
NPS
1
3
Diameter
of Bolt
Holes,
in.
Number
of
Bolts
2-mm
Raised
Face
Ring
Joint
2-mm
Raised
Face
⁄2
⁄2
1
⁄2
1
⁄2
1
⁄2
55
65
65
70
70
...
...
75
85
85
50
50
55
55
65
4
4
4
8
8
5
85
90
90
90
90
95
100
100
100
100
70
75
75
75
75
⁄8
⁄8
7
⁄8
1
1
8
8
8
12
12
3
⁄4
⁄4
3
⁄4
7
⁄8
7
⁄8
95
100
110
115
120
110
115
120
125
135
85
85
90
100
100
11⁄8
11⁄8
11⁄4
11⁄4
13⁄8
12
16
16
20
20
1
1
11⁄8
11⁄8
11⁄4
135
135
145
160
170
145
145
160
170
185
115
115
125
140
150
5
⁄4
⁄4
3
⁄4
3
⁄4
3
⁄4
3
7
Diameter
of Bolts,
in.
Machine
Bolts
1
⁄8
⁄8
5
⁄8
5
⁄8
5
⁄8
5
3
GENERAL NOTES:
(a) Dimensions of Table 7 are in millimeters, except for diameters of bolts and bolt holes, which are in inch units. For dimensions in inch
units, refer to Mandatory Appendix II, Table II 7.
(b) For other dimensions, see Tables 8 and 9.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
71
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
Blind
O
Socket Welding (NPS 1/2 to 3 Only)
O
B
Col. 13
D
X [Note (1)]
B
Col. 11
tf
tf
Y
72
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
B
X
Ah
Lapped
O
Y
Welding Neck
r
X [Note (1)]
B
O
Slip-On Welding
Y
O
tf
Threaded
T
X [Note (1)]
B
Table 8 Dimensions of Class 150 Flanges
X [Note (1)]
tf
tf
tf
Y
Y
ASME B16.5-2013
1
2
3
4
Dimensions of Class 150 Flanges (Cont’d)
5
6
7
8
Threaded/
Slip-on/
Socket
Welding,
Y
Lapped,
Y
Minimum
Thickness
of Flange,
tf
[Notes (2)-(4)]
Minimum
Thickness
Lap Joint,
tf
Diameter
of Hub,
X
⁄2
⁄4
1
11⁄4
11⁄2
90
100
110
115
125
9.6
11.2
12.7
14.3
15.9
11.2
12.7
14.3
15.9
17.5
30
38
49
59
65
21.3
26.7
33.4
42.2
48.3
14
14
16
19
21
2
21⁄2
3
31⁄2
4
150
180
190
215
230
17.5
20.7
22.3
22.3
22.3
19.1
22.3
23.9
23.9
23.9
78
90
108
122
135
60.3
73.0
88.9
101.6
114.3
5
6
8
10
12
255
280
345
405
485
22.3
23.9
27.0
28.6
30.2
23.9
25.4
28.6
30.2
31.8
164
192
246
305
365
14
16
18
20
24
535
595
635
700
815
33.4
35.0
38.1
41.3
46.1
35.0
36.6
39.7
42.9
47.7
400
457
505
559
663
1
3
9
10
11
12
13
14
15
Corner
Bore
Radius
of
Lapped
Flange
and
Pipe,
r
Depth of
Socket,
D
Bore
Length Through Hub
Welding
Neck,
Y
Minimum
Thread
Length
Threaded,
T
[Note (6)]
Minimum
Slip-on/
Socket
Welding,
B
Minimum
Lapped,
B
Welding
Neck/
Socket
Welding,
B
[Note (7)]
16
16
17
21
22
46
51
54
56
60
16
16
17
21
22
22.2
27.7
34.5
43.2
49.5
22.9
28.2
34.9
43.7
50.0
15.8
20.9
26.6
35.1
40.9
3
3
3
5
6
10
11
13
14
16
24
27
29
30
32
25
29
30
32
33
62
68
68
70
75
25
29
30
32
33
61.9
74.6
90.7
103.4
116.1
62.5
75.4
91.4
104.1
116.8
52.5
62.7
77.9
90.1
102.3
8
8
10
10
11
17
19
21
...
...
141.3
168.3
219.1
273.0
323.8
35
38
43
48
54
36
40
44
49
56
87
87
100
100
113
36
40
44
49
56
143.8
170.7
221.5
276.2
327.0
144.4
171.4
222.2
277.4
328.2
128.2
154.1
202.7
254.6
304.8
11
13
13
13
13
...
...
...
...
...
355.6
406.4
457.0
508.0
610.0
56
62
67
71
81
79
87
97
103
111
125
125
138
143
151
57
64
68
73
83
359.2
410.5
461.8
513.1
616.0
360.2
411.2
462.3
514.4
616.0
13
13
13
13
13
...
...
...
...
...
Note
Note
Note
Note
Note
(8)
(8)
(8)
(8)
(8)
ASME B16.5-2013
Outside
Diameter
of
Flange,
O
Hub
Diameter
Beginning
of
Chamfer
Welding
Neck,
Ah
[Note (5)]
Nominal
Pipe
Size,
NPS
73
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 8
Dimensions of Class 150 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions of Table 8 are in millimeters. For dimensions in inches, refer to Table -8 of Mandatory Appendix .
(b) For tolerance, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 7.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for large end of hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This dimension is
defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) The minimum thickness of these loose flanges, in sizes NPS 31⁄2 and smaller, is slightly greater than the thickness of flanges on fittings, Table 9, which are reinforced by being cast
integral with the body of the fitting.
(3) These flanges may be supplied with a flat face. The flat face may be either the full tf dimension of thickness plus 2 mm or the tf dimension thickness without the raised face height.
See para 6.3.2 for additional restrictions.
(4) The flange dimensions illustrated are for regularly furnished 2-mm raised face (except lapped); for requirements of other facings, see Fig. 6.
(5) For welding end bevel (see para. 6.7).
(6) For thread of threaded flanges, see para. 6.9.
(7) Dimensions in Column 13 correspond to the inside diameters of pipe as given in ASME B36.10M for standard wall pipe. Thickness of standard wall is the same as Schedule 40 in
sizes NPS 10 and smaller. Tolerances in para. 7.5.2 apply. These bore sizes are furnished unless otherwise specified by the Purchaser.
(8) To be specified by the Purchaser.
ASME B16.5-2013
74
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 8
Table 9
Dimensions of Class 150 Flanged Fittings
BB
JJ
AA
HH
AA
HH
CC K
K
Long Radius
Elbow
45-deg Elbow
GG
NN
AA
HH
AA
HH
AA
HH
AA
HH
Tee
Cross
A
HH A
A
HH A
Elbow
CC
KK
GG
NN
EE L
L
AA
HH
FF
MM
FF
MM
45-deg Lateral
Reducer
True “Y”
1
2
3
4
5
6
7
8
9
10
11
12
Short
Center-toContact
Surface of
Raised
Face
Lateral and
True “Y,”
FF
Contact
Surface-toContact
Surface of
Raised
Face
Reducer,
GG
[Note (5)]
Center-to-End
Elbow, Tee,
Cross, and
True “Y,”
HH
[Note (6)]
2-mm Raised Face [Note (4)]
Outside
Diameter
of
Flange,
O
Minimum
Thickness of
Flange,
tf
[Notes (1)–(3)]
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter
of
Fitting,
d
⁄2
⁄4
1
11⁄4
11⁄2
90
100
110
115
125
8.0
8.9
9.6
11.2
12.7
2.8
3.2
4.0
4.8
4.8
13
19
25
32
38
...
...
89
95
102
...
...
127
140
152
...
...
44
51
57
...
...
146
159
178
...
...
44
44
51
...
...
114
114
114
...
...
95
102
108
2
21⁄2
3
31⁄2
4
150
180
190
215
230
14.3
15.9
17.5
19.1
22.3
5.6
5.6
5.6
6.4
6.4
51
64
76
89
102
114
127
140
152
165
165
178
197
216
229
64
76
76
89
102
203
241
254
292
305
64
64
76
76
76
127
140
152
165
178
121
133
146
159
171
Nominal
Pipe
Size,
NPS
1
3
Center-toContact
Surface of
Raised Face
Long
Radius
Elbow,
BB
Center-toContact
Surface of
Raised Face
45-deg
Elbow,
CC
Long
Center-toContact
Surface of
Raised
Face
Lateral,
EE
Ring Joint
[Note (4)]
Center-toContact
Surface of
Raised Face
Elbow, Tee,
Cross, and
True “Y,”
AA
ASME B16.5-2013
90 deg
Eccentric
Reducer
75
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
BB
JJ
AA
HH
EE
LL
AA
HH
1
2
3
4
Dimensions of Class 150 Flanged Fittings (Cont’d)
5
6
7
8
9
10
11
12
Contact
Surface-toContact
Surface of
Raised
Face
Reducer,
GG
[Note (5)]
Center-to-End
Elbow, Tee,
Cross, and
True “Y,”
HH
[Note (6)]
2-mm Raised Face [Note (4)]
Center-toContact
Surface of
Raised Face
Long Radius
Elbow,
BB
Center-toContact
Surface of
Raised Face
45-deg
Elbow,
CC
Long
Center-toContact
Surface of
Raised Face
Lateral,
EE
Short
Center-toContact
Surface of
Raised Face
Lateral and
True “Y,”
FF
Ring Joint
[Note (4)]
Nominal
Pipe
Size,
NPS
Outside
Diameter
of
Flange,
O
Minimum
Thickness of
Flange,
tf
[Notes (1)–(3)]
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter
of
Fitting,
d
Center-toContact
Surface of
Raised Face
Elbow, Tee,
Cross, and
True “Y,”
AA
5
6
8
10
12
255
280
345
405
485
22.3
23.9
27.0
28.6
30.2
7.1
7.1
7.9
8.7
9.5
127
152
203
254
305
190
203
229
279
305
260
292
356
419
483
114
127
140
165
190
343
368
444
521
622
89
89
114
127
140
203
229
279
305
356
197
210
235
286
311
14
16
18
20
24
535
595
635
700
815
33.4
35.0
38.1
41.3
46.1
10.3
11.1
11.9
12.7
14.5
337
387
438
489
591
356
381
419
457
559
546
610
673
737
864
190
203
216
241
279
686
762
813
889
1029
152
165
178
203
229
406
457
483
508
610
362
387
425
464
565
ASME B16.5-2013
76
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 9
Table 9
(13)
O
Dimensions of Class 150 Flanged Fittings (Cont’d)
d
tf
S
S
Flanged Fitting
R
T
S
Base Elbow
14
15
16
17
R
U
S
Base Tee
18
19
20
Thickness of
Base, T
[Notes (7)–(10)]
21
22
23
1
Ring Joint [Note (4)]
Long
Centerto-End
Lateral,
LL
[Note (6)]
Short
Centerto-End
Lateral
and
True “Y,”
MM
[Note (6)]
End-to-End
Reducer, NN
[Notes (5), (6)]
Center-to-Base,
R
[Notes (7)–(9)]
Diameter
of Round
Base or
Width of
Square
Base, S
[Note (7)]
...
...
51
57
64
...
...
152
165
184
...
...
51
51
57
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
70
83
83
95
108
210
248
260
298
311
70
70
70
83
83
...
...
...
...
...
105
114
124
133
140
117
117
127
127
152
Centerto-End
Long
Radius
Elbow,
JJ
[Note (6)]
Centerto-End
45-deg
Elbow,
KK
[Note (6)]
...
...
133
146
159
171
184
203
222
235
Base Drilling
[Note (11)]
Thickness
of Ribs, U
[Note (7)]
Bolt
Circle or
Bolt
Spacing,
W
Diameter
of
Drilled
Holes
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
⁄2
⁄4
1
11⁄4
11⁄2
13
13
14
14
16
13
13
14
14
16
88.9
88.9
98.4
98.4
120.6
5
2
21⁄2
3
31⁄2
4
⁄8
⁄8
5
⁄8
5
⁄8
3
⁄4
5
Nominal
Pipe
Size,
NPS
1
3
ASME B16.5-2013
T
13
S
Square Base
Four bolt holes
Round Base
U
77
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
t
13
14
15
16
Dimensions of Class 150 Flanged Fittings (Cont’d)
17
18
19
20
Thickness of
Base,
T
[Notes (7)–(10)]
21
22
23
1
Ring Joint [Note (4)]
Long
Centerto-End
Lateral,
LL
[Note (6)]
Short
Centerto-End
Lateral
And
True “Y,”
MM
[Note (6)]
End-to-End
Reducer,
NN
[Notes (5), (6)]
Center-toBase,
R
[Notes (7)–(9)]
Diameter
of Round
Base or
Width of
Square
Base, S
[Note (7)]
121
133
146
171
197
349
375
451
527
629
95
95
121
133
146
...
...
...
...
...
159
178
213
248
286
178
178
229
229
279
197
210
222
248
286
692
768
819
895
1035
159
171
184
210
235
...
...
...
...
...
318
349
381
406
470
279
279
343
343
343
Centerto-End
Long
Radius
Elbow,
JJ
[Note (6)]
Centerto-End
45-deg
Elbow,
KK
[Note (6)]
267
298
362
425
489
552
616
679
743
870
Base Drilling
[Note (11)]
Thickness
of Ribs, U
[Note (7)]
Bolt
Circle or
Bolt
Spacing,
W
Diameter
of
Drilled
Holes
17
17
24
24
25
17
17
24
24
25
139.7
139.7
190.5
190.5
241.3
⁄4
⁄4
3
⁄4
3
⁄4
7
⁄8
5
6
8
10
12
25
25
29
29
29
25
25
29
29
29
241.3
241.3
298.4
298.4
298.4
7
⁄8
⁄8
7
⁄8
7
⁄8
7
⁄8
14
16
18
20
24
3
3
7
Nominal
Pipe
Size,
NPS
ASME B16.5-2013
78
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 9
Dimensions of Class 150 Flanged Fittings (Cont’d)
NOTES:
(1) The thickness of flange minimum dimensions for loose flanges, Table 9 sizes NPS 31⁄2 and smaller, are slightly heavier than for flanges on these fittings, which are reinforced by
being cast integral with the body of fitting.
(2) These fittings may be supplied with a flat face flange. The flat face may be either the full tf dimension thickness plus 2 mm or the tf dimension thickness without the raised face
height. See para. 6.3.2 for additional restrictions.
(3) The thickness of the flange dimension illustrated is for regularly furnished 2-mm raised face (except lapped); for thickness requirements of other facings, see Fig. 6.
(4) For center-to-contact surface and center-to-end dimensioins of reducing fittings, see para. 6.2.3.
(5) For contact surface-to-contact surface and end-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(6) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use center-tocontact surface or contact surface-to-contact surface dimensions of 2 mm raised face (flange edge) for largest opening, and add the proper height to provide for ring joint groove
applying to each flange. See Table 5 for ring joint facing dimensions.
(7) The base dimensions apply to all straight and reducing sizes.
(8) For reducing fittings, the size and center-to-face dimension of base are determined by the size of the largest opening of fittings. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(9) Bases shall be plain faced unless otherwise specified, and the center-to-base dimension R shall be the finished dimension.
(10) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(11) The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
ASME B16.5-2013
GENERAL NOTES:
(a) Dimensions of Table 9 are in millimeters. For dimensions in inch units, refer to Mandatory Appendix , Table -9.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 8.
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.
(i) For drains, see para. 6.12.
79
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 9
ASME B16.5-2013
Table 10 Templates for Drilling Class 300 Pipe Flanges and Flanged Fittings
(13)
L
O
W
Machine Bolt With Nuts
L
Flange
Point height [Note (1)]
Stud Bolt With Nuts
1
2
3
4
5
6
7
8
Length of Bolts,
L
[Note (4)]
Drilling [Notes (2), (3)]
Stud Bolts
[Note (1)]
Outside
Diameter
of
Flange,
O
Diameter
of Bolt
Circle,
W
⁄2
⁄4
1
11⁄4
11⁄2
95
115
125
135
155
66.7
82.6
88.9
98.4
114.3
5
⁄8
⁄4
3
⁄4
3
⁄4
7
⁄8
4
4
4
4
4
1
2
21⁄2
3
31⁄2
4
165
190
210
230
255
127.0
149.2
168.3
184.2
200.0
3
8
8
8
8
8
5
5
6
8
10
12
280
320
380
445
520
235.0
269.9
330.2
387.4
450.8
7
⁄8
⁄8
1
11⁄8
11⁄4
8
12
12
16
16
14
16
18
20
24
585
650
710
775
915
514.4
571.5
628.6
685.8
812.8
11⁄4
13⁄8
13⁄8
13⁄8
15⁄8
20
20
24
24
24
Nominal
Pipe
Size,
NPS
1
3
Diameter
of Bolt
Holes,
in.
Number
of
Bolts
3
⁄4
⁄8
7
⁄8
7
⁄8
7
⁄8
7
7
9
Diameter
of Bolts,
in.
Machine
Bolts
2-mm
Raised
Face
Ring
Joint
2-mm
Raised
Face
65
75
75
85
90
75
90
90
95
100
55
65
65
70
75
⁄8
⁄4
3
⁄4
3
⁄4
3
⁄4
90
100
110
110
115
100
115
120
125
125
75
85
90
95
95
3
⁄4
⁄4
7
⁄8
1
11⁄8
120
120
140
160
170
135
140
150
170
185
110
110
120
140
145
11⁄8
11⁄4
11⁄4
11⁄4
11⁄2
180
190
195
205
230
190
205
210
220
255
160
165
170
185
205
⁄2
⁄8
5
⁄8
5
⁄8
3
⁄4
5
3
3
GENERAL NOTES:
(a) Dimensions of Table 10 are in millimeters, except for diameters of bolts and bolt holes, which are in inch units. For dimensions in inch
units, refer to Mandatory Appendix II, Table II 10.
(b) For other dimensions, see Tables 11 and 12.
NOTES:
(1) Length of stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
80
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
81
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Blind
O
Socket Welding (NPS 1/2 to 3 Only)
O
B
Col. 13
D
X [Note (1)]
B
Col. 11
tf
tf
Y
O
B
X
Ah
Lapped
O
Y
Welding Neck
r
X [Note (1)]
B
Slip-On Welding
Threaded
Y
O
tf
O
T
X [Note (1)]
B
Table 11 Dimensions of Class 300 Flanges
X [Note (1)]
tf
tf
tf
Y
Y
ASME B16.5-2013
Table 11
(13)
1
2
3
4
5
1
Hub
Diameter
Beginning
of
Chamfer
Welding,
Neck,
Ah
[Note (4)]
7
8
9
10
11
12
13
14
15
16
Welding
Neck/
Socket
Welding,
B
[Note (6)]
Corner
Radius
of Bore
of
Lapped
Flange
and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Depth
of
Socket,
D
Bore
Length Through Hub
Threaded/
Slip-On/
Socket
Welding
Welding, Lapped, Neck,
Y
Y
Y
Minimum
Thread
Length
Threaded,
T
[Note (5)]
Minimum
Slip-On/
Socket
Minimum
Welding, Lapped,
B
B
95
115
125
135
155
12.7
14.3
15.9
17.5
19.1
14.3
15.9
17.5
19.1
20.7
38
48
54
64
70
21.3
26.7
33.4
42.2
48.3
21
24
25
25
29
22
25
27
27
30
51
56
60
64
67
16
16
18
21
23
22.2
27.7
34.5
43.2
49.5
22.9
28.2
34.9
43.7
50.0
15.8
20.9
26.6
35.1
40.9
3
3
3
5
6
23.6
29.0
35.8
44.4
50.3
10
11
13
14
16
2
21⁄2
3
31⁄2
4
165
190
210
230
255
20.7
23.9
27.0
28.6
30.2
22.3
25.4
28.6
30.2
31.8
84
100
117
133
146
60.3
73.0
88.9
101.6
114.3
32
37
41
43
46
33
38
43
44
48
68
75
78
79
84
29
32
32
37
37
61.9
74.6
90.7
103.4
116.1
62.5
75.4
91.4
104.1
116.8
52.5
62.7
77.9
90.1
102.3
8
8
10
10
11
63.5
76.2
92.2
104.9
117.6
17
19
21
...
...
5
6
8
10
12
280
320
380
445
520
33.4
35.0
39.7
46.1
49.3
35.0
36.6
41.3
47.7
50.8
178
206
260
321
375
141.3
168.3
219.1
273.0
323.8
49
51
60
65
71
51
52
62
95
102
97
97
110
116
129
43
47
51
56
61
143.8
170.7
221.5
276.2
327.0
144.4
171.4
222.2
277.4
328.2
128.2
154.1
202.7
254.6
304.8
11
13
13
13
13
144.4
171.4
222.2
276.2
328.6
...
...
...
...
...
14
16
18
20
24
585
650
710
775
915
52.4
55.6
58.8
62.0
68.3
54.0
57.2
60.4
63.5
69.9
425
483
533
587
702
355.6
406.4
457.0
508.0
610.0
75
81
87
94
105
111
121
130
140
152
141
144
157
160
167
64
69
70
74
83
359.2
410.5
461.8
513.1
616.0
360.2
411.2
462.3
514.4
616.0
13
13
13
13
13
360.4
411.2
462.0
512.8
614.4
...
...
...
...
...
Note
Note
Note
Note
Note
(7)
(7)
(7)
(7)
(7)
ASME B16.5-2013
⁄2
⁄4
1
11⁄4
11⁄2
3
82
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Outside
Minimum
Nominal Diameter
Thickness
Minimum
Pipe
of
of Flange,
Thickness Diameter
Lap Joint, of Hub,
Size,
Flange,
tf
X
NPS
O
[Notes (2)–(4)]
tf
6
Dimensions of Class 300 Flanges (Cont’d)
Dimensions of Class 300 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions of Table 11 are in millimeters. For dimensions in inch units, refer to Mandatory Appendix , Table -11.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 10.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This
dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) These flanges may be supplied with a flat face. The flat face may be either the full tf dimension thickness plus 2-mm or the tf dimension thickness without the raised face height.
See para. 6.3.2 for additional restrictions.
(3) The flange dimensions illustrated are for regularly furnished 2-mm raised face (except lapped); for requirements of other facings, see Fig. 6.
(4) For welding end bevel, see para. 6.7.
(5) For thread of threaded flanges, see para. 6.9.
(6) Dimensions in Column 13 correspond to the inside diameters of pipe as given in ASME B36.10M for standard wall pipe. Standard wall dimensions are the same as Schedule 40 in
sizes NPS 10 and smaller. Tolerances in para. 7.5.2 apply. These bore sizes are furnished unless otherwise specified by the purchaser.
(7) To be specified by the Purchaser.
ASME B16.5-2013
83
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 11
Table 12
(13)
Dimensions of Class 300 Flanged Fittings
BB
JJ
AA
HH
AA
HH
CC K
K
BB
JJ
CC
KK
Long Radius
Elbow
45-deg Elbow
AA
HH
AA
HH
AA
HH
AA
HH
Tee
GG
NN
AA
HH
Cross
A
HH A
A
HH A
Elbow
GG
NN
EE L
L
FF
MM
FF
MM
1
2
45-deg Lateral
3
4
Eccentric
Reducer
Reducer
5
6
7
8
True “Y”
9
10
11
12
Short
Center-toContact
Surface of
Raised
Face
Lateral and
True “Y,”
FF
Contact
SurfacetoContact
Surface of
Raised
Face
Reducer,
GG
[Note (5)]
Center-to-End
Elbow, Tee,
Cross, and
True “Y,”
HH
[Note (6)]
2-mm Raised Face (Flange Edge) [Note (4)]
Center-toContact
Surface of
Raised Face
Long
Radius
Elbow,
BB
Center-toContact
Surface of
Raised Face
45-deg
Elbow,
CC
Long
CentertoContact
Surface of
Raised
Face
Lateral,
EE
Ring Joint
[Note (4)]
Nominal
Pipe
Size,
NPS
Outside
Diameter
of
Flange,
O
Minimum
Thickness of
Flange,
tf
[Notes (1)–(4)]
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter
of
Fitting,
d
Center-toContact
Surface of
Raised Face
Elbow, Tee,
Cross, and
True “Y,”
AA
1
11⁄4
11⁄2
125
135
155
15.9
17.5
19.1
4.8
4.8
4.8
25
32
38
102
108
114
127
140
152
57
64
70
165
184
216
51
57
64
114
114
114
108
114
121
2
21⁄2
3
31⁄2
4
165
190
210
230
255
20.7
23.9
27.0
28.6
30.2
6.4
6.4
7.1
7.4
7.9
51
64
76
89
102
127
140
152
165
178
165
178
197
216
229
76
89
89
102
114
229
267
279
318
343
64
64
76
76
76
127
140
152
165
178
135
148
160
173
186
ASME B16.5-2013
90 deg
84
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
AA
HH
EE
LL
AA
HH
1
2
3
4
Dimensions of Class 300 Flanged Fittings (Cont’d)
5
6
7
8
9
10
11
12
Short
Center-toContact
Surface of
Raised
Face
Lateral and
True “Y,”
FF
Contact
SurfacetoContact
Surface of
Raised
Face
Reducer,
GG
[Note (5)]
Center-to-End
Elbow, Tee,
Cross, and
True “Y,”
HH
[Note (6)]
2-mm Raised Face (Flange Edge) [Note (4)]
Center-toContact
Surface of
Raised Face
Long
Radius
Elbow,
BB
Center-toContact
Surface of
Raised Face
45-deg
Elbow,
CC
Long
CentertoContact
Surface of
Raised
Face
Lateral,
EE
Ring Joint
[Note (4)]
Nominal
Pipe
Size,
NPS
Outside
Diameter
of
Flange,
O
Minimum
Thickness of
Flange,
tf
[Notes (1)–(4)]
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter
of
Fitting,
d
Center-toContact
Surface of
Raised Face
Elbow, Tee,
Cross, and
True “Y,”
AA
5
6
8
10
12
280
320
380
445
520
33.4
35.0
39.7
46.1
49.3
9.5
9.5
11.1
12.7
14.3
127
152
203
254
305
203
216
254
292
330
260
292
356
419
483
127
140
152
178
203
381
445
521
610
698
89
102
127
140
152
203
229
279
305
356
211
224
262
300
338
14
16
18
20
24
585
650
710
775
915
52.4
55.6
58.8
62.0
68.3
15.9
17.5
19.0
20.6
23.8
337
387
432
483
584
381
419
457
495
572
546
610
673
737
864
216
241
254
267
305
787
876
952
1029
1206
165
190
203
216
254
406
457
483
508
610
389
427
465
505
583
ASME B16.5-2013
85
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 12
(13)
Table 12
(13)
O
Dimensions of Class 300 Flanged Fittings (Cont’d)
d
tf
S
t
S
Flanged Fitting
R
U
T
13
14
15
16
17
R
S
Base Tee
18
19
Thickness of
Base,
T
[Notes (7)–(10)]
Thickness
of Ribs,
U
[Note (7)]
Ring Joint [Note (5)]
20
21
22
23
1
Diameter
of
Drilled
Holes
Nominal
Pipe
Size,
NPS
...
...
...
1
11⁄4
11⁄2
Center-to-End
45-deg Elbow,
KK
[Note (7)]
Long
Center-to-End
Lateral,
LL
[Note (7)]
Short
Center-to-End
Lateral and
True “Y,”
MM
[Note (7)]
End-to-End
Reducer,
NN
Center-to-Base,
R
[Notes (7)–(9)]
Diameter
of Round
Base or
Width of
Square
Base,
S
Note (7)]
133
146
159
64
70
76
171
191
222
57
64
70
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
173
186
205
224
237
84
97
97
110
124
237
275
287
325
351
71
71
84
84
84
...
...
...
...
...
114
121
133
143
152
133
133
156
156
165
19
19
21
21
22
13
13
16
16
16
98.4
98.4
114.3
114.3
127.0
3
⁄4
⁄4
7
⁄8
7
⁄8
3
⁄4
2
21⁄2
3
31⁄2
4
268
300
364
427
491
135
148
160
186
211
389
452
529
618
706
97
110
135
148
160
...
...
...
...
...
171
190
229
267
305
190
190
254
254
318
25
25
32
32
36
19
19
22
22
25
149.2
149.2
200.0
200.0
269.9
7
5
6
8
10
12
Center-to-End
Long Radius
Elbow,
JJ
[Note (7)]
Base Drilling [Note (11)]
Bolt
Circle or
Bolt
Spacing,
W
3
⁄8
⁄8
7
⁄8
7
⁄8
7
⁄8
7
ASME B16.5-2013
S
Base Elbow
86
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
U
T
S
Square Base
Four bolt holes
Round Base
Table 12
(13)
13
14
15
16
Dimensions of Class 300 Flanged Fittings (Cont’d)
17
18
19
Ring Joint [Note (5)]
Center-to-End
45-deg
Elbow,
KK
[Note (7)]
Long
Center-to-End
Lateral,
LL
[Note (7)]
Short
Center-to-End
Lateral and
True “Y,”
MM
[Note (7)]
End-to-End
Reducer,
NN
Center-to-Base,
R
[Notes (7)–(9)]
554
618
681
746
875
224
249
262
276
316
795
884
960
1038
1218
173
198
211
225
265
...
...
...
...
...
343
375
413
454
527
318
318
381
381
444
21
22
23
1
Diameter
of
Drilled
Holes
Nominal
Pipe
Size,
NPS
Base Drilling [Note (11)]
Thickness of
Base,
T
[Notes (7)–(10)]
36
36
41
41
48
Thickness
of Ribs,
U
[Note (7)]
Bolt
Circle or
Bolt
Spacing,
W
25
29
29
32
32
269.9
269.9
330.2
330.2
387.4
7
⁄8
⁄8
1
1
11⁄8
7
14
16
18
20
24
GENERAL NOTES:
(a) Dimensions of Table 12 are in millimeters. For dimensions in inch units, refer to Mandatory Appendix , Table -12.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 8.
(e) For spot facing, see para. 6.6
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.1.
(i) For drains, see para. 6.12.
NOTES:
(1) These fittings may be supplied with a flat face flange. The flat face may be either the full tf dimension thickness plus 2 mm or the tf dimension thickness without the raised face
height. See para. 6.3.2 for additional restrictions.
(2) The thickness of the flange dimension illustrated is for regularly furnished 2-mm raised face (except lapped); for thickness requirements of other facings, see Fig. 6.
(3) The thickness of flange minimum dimensions for loose flanges, Table 9, size NPS 31⁄2 and smaller, are slightly heavier than for flanges on these fittings that are reinforced by being
cast integral with the body of fitting.
(4) For center-to-contact surface and center-to-end dimensions of reducing fittings, see para. 6.2.3.
(5) For contact surface-to-contact surface and end-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(6) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use center-tocontact surface or contact surface-to-contact surface dimensions of 2-mm raised face (flange edge) for the largest opening, and add the proper height to provide for the ring joint
groove applying to each flange. See Table 5 for ring joint facing dimensions.
(7) The base dimensions apply to all straight and reducing sizes.
(8) For reducing fittings, the size and center-to-face dimension of base are determined by the size of the largest opening of fittings. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(9) Bases shall be plain faced unless otherwise specified, and the center-to-base dimension R shall be the finished dimension.
(10) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(11) The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
ASME B16.5-2013
87
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Center-to-End
Long Radius
Elbow,
JJ
[Note (7)]
Diameter
of Round
Base or
Width of
Square
Base,
S
[Note (7)]
20
ASME B16.5-2013
Table 13 Templates for Drilling Class 400 Pipe Flanges
O
L
Point height [Note (1)]
Flange
1
2
3
Stud Bolt With Nuts
4
5
6
7
Outside
Diameter
of Flange,
O
Diameter
of Bolt
Circle,
W
Diameter
of Bolt
Holes,
in.
Number
of
Bolts
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Nominal
Pipe
Size,
NPS
8
Diameter
of Bolts,
in.
7-mm
Raised
Face
Male and
Female/
Tongue
and Groove
Ring
Joint
1
⁄2
⁄4
1
11⁄4
11⁄2
3
Use Class 600 dimensions in these sizes
2
21⁄2
3
31⁄2
7
4
5
6
8
10
12
255
280
320
380
445
520
200.0
235.0
269.9
330.0
387.4
450.8
1
1
1
11⁄8
11⁄4
13⁄8
8
8
12
12
16
16
⁄8
⁄8
7
⁄8
1
11⁄8
11⁄4
140
145
150
170
190
205
135
135
145
165
185
195
140
145
150
170
190
205
14
16
18
20
24
585
650
710
775
915
514.4
571.5
628.6
685.8
812.8
1 3⁄8
1 1⁄2
11⁄2
15⁄8
17⁄8
20
20
24
24
24
11⁄4
13⁄8
13⁄8
11⁄2
13⁄4
210
220
230
240
265
205
215
220
235
260
210
220
230
250
280
7
GENERAL NOTES:
(a) Dimensions of Table 13 are in millimeters, except for the diameter of bolts and bolt holes, which are in inch units. For dimensions in
inch units, refer to Mandatory Appendix II, Table II 13.
(b) For other dimensions, see Table 14.
NOTES:
(1) The length of the stud bolt does not include the height of the points. See para. 6.10.2.
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
88
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 14 Dimensions of Class 400 Flanges
X [Note (1)]
X [Note (1)]
B
Q
T
Y
tf
tf
O
O
Threaded
Slip-On Welding
Y
X [Note (1)]
B
Y
r
tf
O
Lapped
X
Ah
O
Y
B
tf
tf
O
Blind
Welding Neck
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Hub Diam.
Minimum
Corner
Beginning
Thread
Bore
Outside
Min.
of Chamfer
Length
Radius of Minimum
Length Through Hub
Bore
Nom. Diam. Thickness Diam. Welding
Threaded
Lapped Counterbore
Pipe
of
of
of
Neck,
Threaded/
Welding Flange,
Min.
Min. Welding Flange
Threaded
Slip-On, Lapped, Neck,
T
Slip-On, Lapped, Neck, and Pipe,
Flange,
Size, Flange, Flange, Hub,
Ah
X
[Note (2)]
Y
Y
Y
[Note (3)]
B
B
B
r
Q
NPS
O
tf
1
⁄2
⁄4
1
1
1 ⁄4
11⁄2
2
21⁄2
3
31⁄2
3
Use Class 600 dimensions in these sizes [Note (4)]
4
5
6
8
10
12
255
280
320
380
445
520
35.0
38.1
41.3
47.7
54.0
57.2
146
178
206
260
321
375
114.3
141.3
168.3
219.1
273.0
323.8
51
54
57
68
73
79
51
54
57
68
102
108
89
102
103
117
124
137
37
43
46
51
56
61
116.1
143.8
170.7
221.5
276.2
327.0
116.8
144.5
171.4
222.2
277.4
328.2
Note
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
(5)
11
11
13
13
13
13
117.6
144.4
171.4
222.2
276.2
328.6
14
16
18
20
24
585
650
710
775
915
60.4
63.5
66.7
69.9
76.2
425
483
533
587
702
355.6
406.4
457.0
508.0
610.0
84
94
98
102
114
117
127
137
146
159
149
152
165
168
175
64
69
70
74
83
359.2
410.5
461.8
513.1
616.0
360.2
411.2
462.3
514.4
616.0
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
13
13
13
13
13
360.4
411.2
462.0
512.8
614.4
89
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 14 Dimensions of Class 400 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions of Table 14 are in millimeters, except for the diameter of bolts and bolt holes, which are in inch units. For dimensions in inch units, refer to
Mandatory Appendix II, Table II 7.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 13.
(e) For spot facing, see para 6.6.
(f) For reducing threaded and slip on flanges, see Table 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip on, socket welding, and
lapped flanges. This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) For welding end bevel, see para. 6.7.
(3) For thread of threaded flanges, see para. 6.9.
(4) Socket welding flanges may be provided in NPS 1⁄2 through NPS 21⁄2, using Class 600 dimensions.
(5) To be specified by the Purchaser.
90
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 15 Templates for Drilling Class 600 Pipe Flanges and Flanged Fittings
O
L
Point height [Note (1)]
Flange
1
2
3
Stud Bolt With Nuts
4
5
6
7
Outside
Diameter
of Flange,
O
Diameter
of Bolt
Circle,
W
⁄2
⁄4
1
11⁄4
11⁄2
95
115
125
135
155
66.7
82.6
88.9
98.4
114.3
5
⁄8
⁄4
3
⁄4
3
⁄4
7
⁄8
4
4
4
4
4
1
2
21⁄2
3
31⁄2
4
165
190
210
230
275
127.0
149.2
168.3
184.2
215.9
3
⁄4
⁄8
7
⁄8
1
1
8
8
8
8
8
5
6
8
10
12
330
355
420
510
560
266.7
292.1
349.2
431.8
489.0
11⁄8
11⁄8
11⁄4
13⁄8
13⁄8
14
16
18
20
24
605
685
745
815
940
527.0
603.2
654.0
723.9
838.2
11⁄2
15⁄8
13⁄4
13⁄4
2
1
3
Diameter
of Bolt
Holes,
in.
7-mm
Raised
Face
Male and
Female/
Tongue
and Groove
Ring
Joint
⁄2
⁄8
5
⁄8
5
⁄8
3
⁄4
75
90
90
95
110
70
85
85
90
100
75
90
90
95
110
5
⁄8
⁄4
3
⁄4
7
⁄8
7
⁄8
110
120
125
140
145
100
115
120
135
140
110
120
125
140
145
8
12
12
16
20
1
1
11⁄8
11⁄4
11⁄4
165
170
190
215
220
160
165
185
210
215
165
170
195
215
220
20
20
20
24
24
13⁄8
11⁄2
15⁄8
15⁄8
17⁄8
235
255
275
285
330
230
250
265
280
325
235
255
275
290
335
Number
of
Bolts
3
7
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Nominal
Pipe
Size,
NPS
8
Diameter
of Bolts,
in.
5
3
GENERAL NOTES:
(a) Dimensions of Table 15 are in millimeters, except for the diameters of the bolts and bolt holes, which are expressed in inch units. For
dimensions in inch units, refer to Mandatory Appendix II, Table II 15.
(b) For other dimensions, see Table 16.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para 6.6.
(4) Bolt lengths not shown in the table may be in accordance with Nonmandatory Appendix C (see para. 6.10.2).
91
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 16
Dimensions of Class 600 Flanges
X [Note (1)]
B
X [Note (1)]
Q
tf
T
Y
Y
tf
O
Threaded
Slip-On Welding
X [Note (1)]
B
X [Note (1)]
B
Col. 10
r
D
tf
Y
tf
Y
O
B
Col. 12
O
Socket Welding (NPS 1/2 to 3 Only)
Lapped
ASME B16.5-2013
X
Ah
92
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
O
Y
B
tf
tf
O
Blind
Welding Neck
1
2
3
4
5
6
Threaded/
Slip-On/
Socket
Welding,
Y
22
25
27
29
32
7
8
9
Lapped,
Y
Welding
Neck,
Y
Minimum
Thread
Length
Threaded
Flange,
T
[Note (3)]
Minimum
Slip-On/
Socket
Welding,
B
Minimum
Lapped,
B
22
25
27
29
32
52
57
62
67
70
16
16
18
21
23
22.2
27.7
34.5
43.2
49.5
22.9
28.2
34.9
43.7
50.0
Length Through Hub
Nominal
Pipe
Size,
NPS
1
⁄2
⁄4
1
11⁄4
11⁄2
3
Outside
Diameter
of
Flange,
O
Minimum
Thickness
of Flange,
tf
Diameter
of Hub,
X
Hub Diameter
Beginning of
Chamfer
Welding Neck,
Ah
[Note (2)]
95
115
125
135
155
14.3
15.9
17.5
20.7
22.3
38
48
54
64
70
21.3
26.7
33.4
42.2
48.3
10
11
12
13
14
15
Welding
Neck/
Socket
Welding,
B
Corner
Bore
Radius of
Lapped
Flange and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Depth of
Socket,
D
3
3
3
5
6
23.6
29.0
35.8
44.4
50.6
Bore
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
10
11
13
14
16
Table 16
1
2
3
Dimensions of Class 600 Flanges (Cont’d)
4
5
6
Threaded/
Slip-On/
Socket
Welding,
Y
7
8
9
Lapped,
Y
Welding
Neck,
Y
Minimum
Thread
Length
Threaded
Flange,
T
[Note (3)]
Minimum
Slip-On/
Socket
Welding,
B
Minimum
Lapped,
B
Length Through Hub
10
11
13
14
15
Welding
Neck/
Socket
Welding,
B
Corner
Bore
Radius of
Lapped
Flange and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Depth of
Socket,
D
Bore
Nominal
Pipe
Size,
NPS
Outside
Diameter
of
Flange,
O
Minimum
Thickness
of Flange,
tf
Diameter
of Hub,
X
Hub Diameter
Beginning of
Chamfer
Welding Neck,
Ah
[Note (2)]
2
21⁄2
3
31⁄2
4
165
190
210
230
275
25.4
28.6
31.8
35.0
38.1
84
100
117
133
152
60.3
73.0
88.9
101.6
114.3
37
41
46
49
54
37
41
46
49
54
73
79
83
86
102
29
32
35
40
42
61.9
74.6
90.7
103.4
116.1
62.5
75.4
91.4
104.1
116.8
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
8
8
10
10
11
63.5
76.2
92.2
104.9
117.6
17
19
21
...
...
5
6
8
10
12
330
355
420
510
560
44.5
47.7
55.6
63.5
66.7
189
222
273
343
400
141.3
168.3
219.1
273.0
323.8
60
67
76
86
92
60
67
76
111
117
114
117
133
152
156
48
51
58
66
70
143.8
170.7
221.5
276.2
327.0
144.4
171.4
222.2
277.4
328.2
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
11
13
13
13
13
144.4
171.4
222.2
276.2
328.6
...
...
...
...
...
14
16
18
20
24
605
685
745
815
940
69.9
76.2
82.6
88.9
101.6
432
495
546
610
718
355.6
406.4
457.0
508.0
610.0
94
106
117
127
140
127
140
152
165
184
165
178
184
190
203
74
78
80
83
93
359.2
410.5
461.8
513.1
616.0
360.2
411.2
462.3
514.4
616.0
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
13
13
13
13
13
360.4
411.2
462.0
512.8
614.4
...
...
...
...
...
GENERAL NOTES:
(a) Dimensions of Table 16 are in millimeters, except for the diameter of the bolts and bolt holes, which are in inch units. For dimensions in inch units, refer to Mandatory Appendix ,
Table -16.
(b) For tolerance, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 15.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This
dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) For welding end bevel, see para. 6.7.
(3) For thread of threaded flanges, see para. 6.9.
(4) To be specified by the Purchaser.
ASME B16.5-2013
93
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
12
ASME B16.5-2013
Table 17 Templates for Drilling Class 900 Pipe Flanges and Flanged Fittings
O
L
Point height [Note (1)]
Flange
1
Nominal
Pipe
Size,
NPS
2
Outside
Diameter
of Flange,
O
3
Stud Bolt With Nuts
4
5
6
7
Diameter of
Bolt Holes,
in.
Number of
Bolts
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Diameter of
Bolt Circle,
W
8
Diameter of
Bolts, in.
7-mm
Raised Face
Male and Female/
Tongue and Groove
Ring Joint
1
⁄2
⁄4
1
3
Use Class 1500 dimensions in these sizes
11⁄4
11⁄2
2
21⁄2
7
3
4
5
6
240
290
350
380
190.5
235.0
279.4
317.5
1
11⁄4
13⁄8
11⁄4
8
8
8
12
⁄8
11⁄8
11⁄4
11⁄8
145
170
190
190
140
165
185
185
145
170
190
195
8
10
12
14
470
545
610
640
393.7
469.9
533.4
558.8
11⁄2
11⁄2
11⁄2
15⁄8
12
16
20
20
13⁄8
13⁄8
13⁄8
11⁄2
220
235
255
275
215
230
250
265
220
235
255
280
16
18
20
24
705
785
855
1,040
616.0
685.8
749.3
901.7
13⁄4
2
21⁄8
25⁄8
20
20
20
20
15⁄8
17⁄8
2
21⁄2
285
325
350
440
280
320
345
430
290
335
360
455
GENERAL NOTES:
(a) Dimensions of Table 17 are in millimeters, except for diameters of bolts and bolt holes, which are in inch units. For dimensions in inch
units, refer to Mandatory Appendix II, Table II 17.
(b) For other dimensions, see Tables 18 and 19.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
94
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 18 Dimensions of Class 900 Flanges
X [Note (1)]
X [Note (1)]
B
Q
T
Y
tf
tf
O
O
Threaded
Slip-On Welding
Y
X [Note (1)]
B
Y
r
tf
O
Lapped
X
Ah
O
Y
B
tf
tf
O
Blind
Welding Neck
1
Nom.
Pipe
Size,
NPS
2
Outside
Diam.
of
Flange,
O
3
Min.
Thickness
of Flange,
tf
4
5
Diam.
of
Hub,
X
Hub Diam.
Beginning
of Chamfer
Welding
Neck,
Ah
[Note (2)]
6
7
8
9
Welding
Neck,
Y
Minimum
Thread
Length
Threaded
Flange,
T
[Note (3)]
Length Through Hub
Threaded/
Slip On,
Y
Lapped,
Y
10
11
12
13
Min.
Lapped,
B
Welding
Neck,
B
Corner
Bore
Radius of
Lapped
Flange
and Pipe,
r
Bore
Min.
Slip On,
B
14
Minimum
Counterbore
Threaded
Flange,
Q
1
⁄2
⁄4
1
11⁄4
11⁄2
2
21⁄2
3
Use Class 1500 dimensions in these sizes [Note (4)]
3
4
240
290
38.1
44.5
127
159
88.9
114.3
54
70
54
70
102
114
42
48
90.7
116.1
91.4
116.8
Note (5)
Note (5)
10
11
92.2
117.6
5
6
8
10
12
350
380
470
545
610
50.8
55.6
63.5
69.9
79.4
190
235
298
368
419
141.3
168.3
219.1
273.0
323.8
79
86
102
108
117
79
86
114
127
143
127
140
162
184
200
54
58
64
72
77
143.8
170.7
221.5
276.2
327.0
144.4
171.4
222.2
277.4
328.2
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
11
13
13
13
13
144.4
171.4
222.2
276.2
328.6
14
16
18
20
24
640
705
785
855
1,040
85.8
88.9
101.6
108.0
139.7
451
508
565
622
749
355.6
406.4
457.0
508.0
610.0
130
133
152
159
203
156
165
190
210
267
213
216
229
248
292
83
86
89
93
102
359.2
410.5
461.8
513.1
616.0
360.2
411.2
462.3
514.4
616.0
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
13
13
13
13
13
360.4
411.2
462.0
512.8
614.4
95
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 18 Dimensions of Class 900 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions of Table 18 are in millimeters. For dimensions in inch units, refer to Mandatory Appendix II, Table II 18.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 17.
(e) For spot facing, see para 6.6.
(f) For reducing threaded and slip on flanges, see Table 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip on, socket welding, and
lapped flanges. This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) For welding end bevel, see para. 6.7.
(3) For thread of threaded flanges, see para. 6.9.
(4) Socket welding flanges may be provided in NPS 1⁄2 through NPS 21⁄2, using Class 1500 dimensions.
(5) To be specified by the Purchaser.
96
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 19 Templates for Drilling Class 1500 Pipe Flanges
O
L
Point height [Note (1)]
Flange
1
Nominal
Pipe Size,
NPS
1
2
3
Outside
Diameter
of Flange,
O
4
5
6
7
120
130
150
160
82.6
88.9
101.6
111.1
11⁄2
2
21⁄2
3
4
180
215
245
265
310
5
6
8
10
12
14
16
18
20
24
Diameter of
Bolt Holes,
in.
7
8
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Diameter of
Bolt Circle,
W
⁄2
⁄4
1
11⁄4
3
Stud Bolt With Nuts
Number of
Bolts
Diameter of
Bolts,
in.
7-mm
Raised Face
Male and Female/
Tongue and Groove
Ring Joint
⁄4
⁄4
7
⁄8
7
⁄8
110
115
125
125
100
110
120
120
110
115
125
125
3
⁄8
⁄8
1
1
4
4
4
4
123.8
165.1
190.5
203.2
241.3
11⁄8
1
11⁄8
11⁄4
13⁄8
4
8
8
8
8
1
⁄8
1
11⁄8
11⁄4
140
145
160
180
195
135
140
150
170
190
140
145
160
180
195
375
395
485
585
675
292.1
317.5
393.7
482.6
571.5
15⁄8
11⁄2
13⁄4
2
21⁄8
8
12
12
12
16
11⁄2
13⁄8
15⁄8
17⁄8
2
250
260
290
335
375
240
255
285
330
370
250
265
300
345
385
750
825
915
985
1 170
635.0
704.8
774.7
831.8
990.6
23⁄8
25⁄8
27⁄8
31⁄8
35⁄8
16
16
16
16
16
21⁄4
21⁄2
23⁄4
3
31⁄2
405
445
495
540
615
400
440
490
535
610
425
470
525
565
650
7
3
7
GENERAL NOTES:
(a) Dimensions of Table 19 are in millimeters, except for the diameters of the bolts and bolt holes, which are in inch units. For dimensions
in inch units, refer to Mandatory Appendix II, Table II 19.
(b) For other dimensions, see Table 20.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
97
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table 20
Dimensions of Class 1500 Flanges
X [Note (1)]
B
X [Note (1)]
Q
tf
T
Y
Y
tf
O
Threaded (NPS 1/2 to 21/2 Only)
Slip-On Welding (NPS 1/2 to 21/2 Only)
X [Note (1)]
B
X [Note (1)]
B
Col. 10
r
D
tf
Y
tf
Y
O
B
Col. 12
O
Socket Welding (NPS 1/2 to 21/2 Only)
X
Ah
O
B
ASME B16.5-2013
Lapped
98
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
Y
tf
tf
O
Blind
Welding Neck
1
2
3
4
Outside
Diameter Minimum
Nominal
of
Thickness Diameter
Pipe Size, Flange, of Flange, of Hub,
X
NPS
O
tf
1
⁄2
⁄4
1
11⁄4
3
120
130
150
160
22.3
25.4
28.6
28.6
38
44
52
64
5
Hub Diameter
Beginning of
Chamfer
Welding Neck,
Ah
[Note (2)]
21.3
26.7
33.4
42.2
6
7
8
9
10
11
Bore
Minimum
Threaded/
Thread Length Minimum
Slip-On/
Threaded
Slip-On/
Socket
Welding
Flange,
Socket Minimum
Welding, Lapped, Neck,
T
Welding, Lapped,
Y
Y
Y
[Note (3)]
B
B
12
13
14
15
Length Through Hub
32
35
41
41
32
35
41
41
60
70
73
73
23
26
29
31
22.2
27.7
34.5
43.2
22.9
28.2
34.9
43.7
Welding
Neck/
Socket
Welding,
B
Note
Note
Note
Note
(4)
(4)
(4)
(4)
Corner Bore
Minimum
Radius of
Counterbore
Lapped Flange
Threaded Depth of
and Pipe,
Flange,
Socket,
r
Q
D
3
3
3
5
23.6
29.0
35.8
44.4
10
11
13
14
Table 20
1
2
3
4
Hub Diameter
Beginning of
Chamfer
Welding Neck,
Ah
[Note (2)]
6
7
8
9
10
11
Length Through Hub
Bore
Minimum
Threaded/
Thread Length Minimum
Slip-On/
Threaded
Slip-On/
Socket
Welding
Flange,
Socket Minimum
Welding, Lapped, Neck,
T
Welding, Lapped,
Y
Y
Y
[Note (3)]
B
B
12
Welding
Neck/
Socket
Welding,
B
13
14
15
Corner Bore
Minimum
Radius of
Counterbore
Lapped Flange
Threaded Depth of
and Pipe,
Flange,
Socket,
r
Q
D
11⁄2
2
21⁄2
3
4
180
215
245
265
310
31.8
38.1
41.3
47.7
54.0
70
105
124
133
162
48.3
60.3
73.0
88.9
114.3
44
57
64
...
...
44
57
64
73
90
83
102
105
117
124
32
39
48
...
...
49.5
61.9
74.6
...
...
50.0
62.5
75.4
91.4
116.8
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
6
8
8
10
11
50.6
63.5
76.2
...
...
16
17
19
...
...
5
6
8
10
12
375
395
485
585
675
73.1
82.6
92.1
108.0
123.9
197
229
292
368
451
141.3
168.3
219.1
273.0
323.8
...
...
...
...
...
105
119
143
178
219
156
171
213
254
283
...
...
...
...
...
...
...
...
...
...
144.4
171.4
222.2
277.4
328.2
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
11
13
13
13
13
...
...
...
...
...
...
...
...
...
...
14
16
18
20
24
750
825
915
985
1 170
133.4
146.1
162.0
177.8
203.2
495
552
597
641
762
355.6
406.4
457.0
508.0
610.0
...
...
...
...
...
241
260
276
292
330
298
311
327
356
406
...
...
...
...
...
...
...
...
...
...
360.2
411.2
462.3
514.4
616.0
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
13
13
13
13
13
...
...
...
...
...
...
...
...
...
GENERAL NOTES:
(a) Dimensions of Table 20 are in millimeters. For dimensions in inch units, refer to Mandatory Appendix , Table -20.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 19.
(e) For spot facing, see para 6.6.
(f) For reducing threaded and slip-on flanges, see Table 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) For welding end bevel, see para. 6.7.
(3) For thread of threaded flanges, see para. 6.9.
(4) To be specified by the Purchaser.
ASME B16.5-2013
99
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Outside
Diameter Minimum
Nominal
of
Thickness Diameter
Pipe Size, Flange, of Flange, of Hub,
NPS
O
tf
X
5
Dimensions of Class 1500 Flanges (Cont’d)
ASME B16.5-2013
Table 21 Templates for Drilling Class 2500 Pipe Flanges
O
L
Point height [Note (1)]
Flange
1
2
3
Stud Bolt With Nuts
4
5
Diameter of
Bolt Circle,
W
⁄2
⁄4
1
11⁄4
11⁄2
135
140
160
185
205
88.9
95.2
108.0
130.2
146.0
⁄8
⁄8
1
11⁄8
11⁄4
4
4
4
4
4
2
21⁄2
3
4
235
265
305
355
171.4
196.8
228.6
273.0
11⁄8
11⁄4
13⁄8
15⁄8
5
6
8
10
12
420
485
550
675
760
323.8
368.3
438.2
539.8
619.1
17⁄8
21⁄8
21⁄8
25⁄8
27⁄8
1
3
7
Diameter of
Bolt Holes,
in.
7
7
8
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Outside
Diameter
of Flange,
O
Nominal
Pipe Size,
NPS
6
7-mm
Raised
Face
Male and Female/
Tongue and Groove
Ring Joint
⁄4
⁄4
7
⁄8
1
11⁄8
120
125
140
150
170
115
120
135
145
165
120
125
140
150
170
8
8
8
8
1
11⁄8
11⁄4
11⁄2
180
195
220
255
170
190
215
250
180
205
230
260
8
8
12
12
12
13⁄4
2
2
21⁄2
23⁄4
300
345
380
490
540
290
335
375
485
535
310
355
395
510
560
Number of
Bolts
Diameter
of Bolts,
in.
3
3
GENERAL NOTES:
(a) Dimensions of Table 21 are in millimeters, except for the diameters of the bolts and bolt holes, which are in inch units. For dimensions
in inch units, refer to Mandatory Appendix II, Table II 21.
(b) For other dimensions, see Table 22.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined with Nonmandatory Appendix C (see para. 6.10.2).
100
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table 22 Dimensions of Class 2500 Flanges
X [Note (1)]
B
X [Note (1)]
Q
tf
T
Y
r
Y
tf
O
O
Threaded
(NPS 1/2 to 21/2 Only)
Lapped
X
Ah
O
Y
B
tf
tf
O
Blind
Welding Neck
1
Nom.
Pipe
Size,
NPS
1
2
3
4
5
6
7
8
9
10
11
Hub Diam.
Minimum
Beginning
Thread
Outside
of Chamfer
Length
Length Through Hub
Bore
Diam.
Min.
Welding
Threaded
of
Thickness Diam.
Neck,
Welding Flange,
Min.
Welding
Threaded, Lapped, Neck,
T
Lapped,
Neck,
Flange, of Flange, of Hub,
Ah
O
tf
X
[Note (2)]
Y
Y
Y
[Note (3)]
B
B
12
13
Corner
Bore
Radius of
Lapped
Minimum
Flange
Counterbore
and
Threaded
Pipe,
Flange,
r
Q
⁄2
⁄4
1
11⁄4
11⁄2
135
140
160
185
205
30.2
31.8
35.0
38.1
44.5
43
51
57
73
79
21.3
26.7
33.4
42.2
48.3
40
43
48
52
60
40
43
48
52
60
73
79
89
95
111
29
32
35
39
45
22.9
28.2
34.9
43.7
50.0
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
3
3
3
5
6
23.6
29.0
35.8
44.4
50.6
2
21⁄2
3
4
235
265
305
355
50.9
57.2
66.7
76.2
95
114
133
165
60.3
73.0
88.9
114.3
70
79
...
...
70
79
92
108
127
143
168
190
51
58
...
...
62.5
75.4
91.4
116.8
Note
Note
Note
Note
(4)
(4)
(4)
(4)
8
8
10
11
63.5
76.2
...
...
5
6
8
10
12
420
485
550
675
760
92.1
108.0
127.0
165.1
184.2
203
235
305
375
441
141.3
168.3
219.1
273.0
323.8
...
...
...
...
...
130
152
178
229
254
229
273
318
419
464
...
...
...
...
...
144.4
171.4
222.2
277.4
328.2
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
11
13
13
13
13
...
...
...
...
...
3
101
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table 22 Dimensions of Class 2500 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions of Table 22 are in millimeters, except for the diameter of the bolts and bolt holes, which are in inch units. For dimensions
in inch units, refer to Mandatory Appendix II, Table II 22.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table 21.
(e) For spot facing, see para 6.6.
(f) For reducing threaded and slip on flanges, see Table 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded and
lapped flanges. This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) For welding end bevel, see para. 6.7.
(3) For thread of threaded flanges, see para. 6.9.
(4) To be specified by the Purchaser.
102
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
MANDATORY APPENDIX I
THREADING OF PIPE FOR AMERICAN
NATIONAL STANDARD THREADED FLANGES
The length of external taper threads in ASME B1.20.1
is sufficient to provide a satisfactory joint when assembled with corresponding internal taper threads in couplings and fittings. In this Standard, the length of
internal thread in Classes 150, 300, and 400 flanges also
conforms to ASME B1.20.1.
In Class 600 and higher rated flanges, the length
through the hub may exceed the length for internal
threads in ASME B1.20.1. Where this occurs, the
extended length of internal threads follows the taper of
the standard taper threads. Therefore, the diameters of
the extra threads are smaller than those shown in
ASME B1.20.1.
When threaded flanges conforming to this Standard
are assembled with threaded-end pipe, it is intended
that the end of the pipe be reasonably close to the mating
surface of the flange. To meet this intent, the following
requirements are imposed on the mating pipe and external thread:
(a) Pipe to be threaded into flanges of Class 600 or
higher rating shall be Schedule 80 or heavier in wall
thickness.
(b) The length of external effective thread on the pipe
end shall be greater than specified in ASME B1.20.1.
When tested with the standard ring gage, the pipe end
shall project beyond the gage by the distance specified
in Table I-1, subject to a tolerance of one thread pitch
as provided in ASME B1.20.1.
(c) The extra threads shall continue the taper specified
in ASME B1.20.1, so that the pitch diameter of the thread
at the pipe end is less than specified therein.
(d) It is recommended that power equipment be used
to assemble threaded joints having longer than standard
taper threads, in order to bring the pipe end close to
the flange face.
103
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table I-1 Projection of Threaded Pipe End Through a Ring Gage
Class
150, 300, 400
Class 600
Number
of
Turns
Number
of
Turns
mm
⁄2
⁄4
1
11⁄4
11⁄2
...
...
...
...
...
(1)
(1)
(1)
(1)
(1)
2
21⁄2
3
31⁄2
4
...
...
...
...
(1)
5
6
8
10
12
14
16
18
20
24
NPS
1
3
Class 900
in.
Number
0f
Turns
mm
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
(1)
...
1
1
11⁄2
...
...
3.2
3.2
4.8
...
...
0.12
0.12
0.19
(1)
(1)
(1)
(1)
(1)
11⁄2
11⁄2
2
3
3
4.8
4.8
6.4
9.5
9.5
(1)
(1)
(1)
(1)
(1)
3
3
3
3
3
9.5
9.5
9.5
9.5
9.5
Class 1500
in.
Number
of
Turns
mm
...
...
...
...
...
...
...
...
...
...
31⁄2
5
5
5
5
...
...
3
...
31⁄2
...
...
9.5
...
11.1
11.1
...
0.38
...
0.44
0.19
0.19
0.25
0.38
0.38
31⁄2
31⁄2
4
5
5
11.1
11.1
12.7
15.9
15.9
0.38
0.38
0.38
0.38
0.38
6
6
6
6
6
19.0
19.0
19.0
19.0
19.0
Projection
Class 2500
in.
Number
of
Turns
mm
in.
6.4
9.5
11.1
11.1
11.1
0.25
0.38
0.44
0.44
0.44
7
7
71⁄2
71⁄2
71⁄2
12.7
12.7
16.5
16.5
16.5
0.50
0.50
0.65
0.65
0.65
5
5
...
...
...
11.1
15.9
...
...
...
0.44
0.62
...
...
...
71⁄2
8
...
...
...
16.5
25.4
...
...
...
0.65
1.00
...
...
...
0.44
0.44
0.50
0.62
0.62
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
0.75
0.75
0.75
0.75
0.75
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Projection
Projection
NOTE:
(1) Use taper pipe thread per ASME B1.20.1 for these sizes.
104
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Projection
ASME B16.5-2013
MANDATORY APPENDIX II
PRESSURE–TEMPERATURE RATINGS AND DIMENSIONAL DATA
FOR CLASSES 150, 300, 400, 600, 900, 1500, AND 2500
FLANGES AND CLASSES 150 AND 300 FLANGED FITTINGS IN
U.S. CUSTOMARY UNITS
The pressure–temperature ratings for the materials
listed in Table 1A and covered by this Standard are as
listed in Tables 2-1.1 through 2-3.19 and Tables II-2-1.1
through II-2-3.19 of of this Mandatory Appendix.
Tables 2-1.1 through 2-3.19 have pressure–
temperature ratings using bar units for pressure (1 bar p
100 kPa) and degrees Celsius units for temperature.
Tables II-2-1.1 through II-2-3.19 of this Mandatory
Appendix have coterminous pressure–temperature ratings using psi units for pressure and degrees Fahrenheit
units for temperature.
All tabulated pressures are gage pressures. Other
tables and figures included in this Mandatory Appendix
provide dimensional data in U.S. Customary units for
the following:
(a) Classes 150, 300, 400, 600, 900, 1500, and 2500
flanges
(b) Classes 150 and 300 flanged fittings
Nonmandatory Appendix E includes dimensional
data for Classes 400, 600, 900, 1500, and 2500 flanged
fittings for information.
105
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. II-6 End Flange Facings and Their Relationship to Flange Thickness and Center-to-End and
End-to-End Dimensions
AA, BB, CC, etc.
[Notes (1), (2)]
AA, BB, CC, etc.
[Notes (1), (2)]
tf
tf
2 mm
2-mm raised face
regularly furnished
on Classes 150 and R
300, unless otherwise
ordered
5 mm
Small female face
(on end of pipe)
X
7-mm raised face
regularly furnished
R
on Classes 400 and
higher, unless
otherwise ordered
7 mm
Large or small
male face
[Notes (4), (5)]
S R
Small Large
male male
Large or small
female face
[Notes (4), (5)]
Large or small
tongue face
[Notes (4), (5)] T
R
Note (3)
U
Small Large Small
tongue tongue and
large
tongue
Large or small
5 mm
groove face
[Notes (4),
(5)]
K [Note (6)]
Note (3)
Y L W
Z
Small Large Small
groove groove and
large
groove
5 mm
E
Ring joint
face
K [Note (6)]
X WL
Small Large
female female
tf
Note (3)
K [Note (7)] P
7 mm
HH, JJ, KK, etc.
[Notes (1), (2)]
Small male face
(on end of pipe)
S
Note (3)
End Flange Facings
Flange Thickness and Center-to-End Dimensions
Classes 150 through 2500
t [Note (8)]
t
Raised face
R
t [Note (8)]
E
Ring joint
face
t
K [Note (9)]
P
Lap Joint Stub End
Facings and Thickness
106
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Centerline of fitting
7 mm
7 mm
Centerline of fitting
(13)
ASME B16.5-2013
Fig. II-6 End Flange Facings and Their Relationship to Flange Thickness and Center-to-End and
End-to-End Dimensions (Cont’d)
GENERAL NOTE:
Dimensions are in inches. For dimensions in millimeters, refer to Fig. 6.
NOTES:
(1) See paras. 6.2 and 6.4.
(2) See Tables II 7 through II 22.
(3) For small male and female joints, care should be taken in the use of these dimensions to ensure that the inside diameter of the pipe
fitting is small enough to permit sufficient bearing surface to prevent crushing of the gasket (see Table II 4). This applies particularly
on lines where the joint is made on the end of the pipe. Threaded companion flanges for small male and female joints are furnished
with plain face and are threaded with American National Standard Locknut Thread (NPSL).
(4) See Table II 4 for dimensions of facings (other than ring joint) and Table II 5 for ring joint facing.
(5) Large male and female faces and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
(6) See Table II 4.
(7) See Table II 5.
(8) See para. 6.4.3.
(9) See para. 6.4.3.5 and Table II 5.
107
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
ASME B16.5-2013
Fig. II-7 Bevel for Wall Thicknesses t from 0.19 in.
to 0.88 in. Inclusive
0.25-in
min.
1:3 max. slope
37.5 deg
± 2.5 deg
45-deg max.
t
Fig. II-8 Bevel for Wall Thicknesses t Greater Than
0.88 in.
0.06 in. ± 0.03 in.
B
A
X
0.25-in.
min.
1:3 max. slope
10 deg ± 2.5 deg
Welding Ends
(Welding Neck Flanges, No Backing Rings)
A
B
t
x
p
p
p
p
0.12 R min. radius
37.5 deg ± 2.5 deg
nominal outside diameter of pipe
nominal inside diameter of pipe
nominal wall thickness of pipe
diameter of hub (see dimensional tables)
t
45-deg max.
3/
4
in.
0.06 in. ± 0.03 in.
GENERAL NOTES:
(a) Dimensions are in inches. For dimensions in millimeters, refer
to Figs. 7 and 8.
(b) See paras. 6.7, 6.8, and 7.4 for details and tolerances.
(c) See Figs. II 9 and II 10 for additional details of welding ends.
(d) When the thickness of the hub at the bevel is greater than
that of the pipe to which the flange is joined and the addi
tional thickness is provided on the outside diameter, a taper
weld having a slope not exceeding 1 to 3 may be used, or,
alternatively, the greater outside diameter may be tapered at
the same maximum slope or less, from a point on the welding
bevel equal to the outside diameter of the mating pipe. Simi
larly, when the greater thickness is provided on the inside of
the flange, it shall be taper bored from the welding end at a
slope not exceeding 1 to 3. When flanges covered by this Stan
dard are intended for services with light wall, higher strength
pipe, the thickness of the hub at the bevel may be greater
than that of the pipe to which the flange is joined. Under
these conditions, a single taper hub may be provided, and the
outside diameter of the hub at the base (dimension X ) may
also be modified. The additional thickness may be provided
on either inside or outside or partially on each side, but the
total additional thickness shall not exceed one half times the
nominal wall thickness of intended mating pipe (see Figs. 1
through 3).
(e) The hub transition from the A diameter to the X diameter shall
fall within the maximum and minimum envelope outlined by
the 1:3 max. slope and solid line.
(f) For welding end dimensions, refer to ASME B16.25.
(g) The 0.25 in. min. dimension applies only to the solid line
configuration.
A
B
X
Welding Ends
(Welding Neck Flanges, No Backing Rings)
A
B
t
x
p
p
p
p
nominal outside diameter of pipe
nominal inside diameter of pipe
nominal wall thickness of pipe
diameter of hub (see dimensional tables)
GENERAL NOTE:
Please see Fig. II 7 General Notes.
108
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. II-9 Inside Contour for Use With Rectangular
Backing Ring
Fig. II-10 Inside Contour for Use With Taper Backing
Ring
30-deg max.
10 deg
C
B
C
0.12-in., 1-min. radius
0.22-in. min.
0.5-in. min. [Note (1)]
Welding Ends
(Welding Neck Flanges)
Welding Ends
(Welding Neck Flanges)
nominal outside diameter of welding end, in.
nominal inside diameter of pipe ( A 2t), in.
A 0.031 1.75t 0.010 in.
nominal wall thickness of pipe
minus tolerance on outside diameter of pipe to
ASTM A106, etc.
1.75t p 871⁄2% of nominal wall (permitted by ASTM A106,
etc.) multiplied by 2 to convert into terms of
diameter
0.010 in. p plus tolerance on diameter C (see para. 7.5.3)
A
B
C
T
0.031 in.
nominal outside diameter of welding end, in.
nominal inside diameter of pipe ( A 2t), in.
A 0.031 1.75t 0.010 in.
nominal wall thickness of pipe
minus tolerance on outside diameter of pipe to
ASTM A106, etc.
1.75t p 871⁄2% of nominal wall (permitted by ASTM A106,
etc.) multiplied by 2 to convert into terms of
diameter
0.010 in. p plus tolerance on diameter C (see para. 7.5.3)
A
B
C
T
0.031 in.
p
p
p
p
p
p
p
p
p
p
GENERAL NOTES:
(a) Dimensions are in inches. For dimensions in millimeters, refer
to Figs. 9 and 10.
(b) 0.5 in. depth based on use of 0.75 in. wide backing ring.
(c) See paras. 6.7, 6.8, and 7.5 for details and tolerances.
(d) See Figs. II 7 and II 8 for welding end details of welding neck
flanges.
(e) For dimensions, see ASME B16.25.
GENERAL NOTES:
(a) Dimensions are in inches. For dimensions in millimeters, refer
to Figs. 9 and 10.
(b) See paras. 6.7, 6.8, and 7.5 for details and tolerances.
(c) See Figs. II 7 and II 8 for welding end details of welding neck
flanges.
(d) For dimensions, see ASME B16.25.
NOTE:
(1) 0.5 in. depth based on use of 0.75 in. wide backing ring.
109
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. II-11 Thread for Connection Tapping
Fig. II-13 Bosses for Connections
Correction
Size, NPS
Thread Length,
T, in.
3
⁄8
⁄2
3
⁄4
1
11⁄4
11⁄2
2
0.41
0.53
0.55
0.68
0.71
0.72
0.76
1
GENERAL NOTE:
Correction
Size, NPS
Minimum Boss
Diameter, J, in.
3
⁄8
⁄2
3
⁄4
1
11⁄4
11⁄2
2
See paras. 6.12.2, 6.12.5, and 6.12.6.
1
NOTE:
(1) In no case shall the effective length of thread T be less than
that shown in the table above. These lengths are equal to the
effective thread length of external pipe threads
(ASME B1.20.1).
GENERAL NOTE:
Fig. II-12 Socket Welding for Connections
1.25
1.50
1.75
2.12
2.50
2.75
3.38
See para. 6.12.5.
Fig. II-14 Butt Welding for Connections
Correction
Size, NPS
3
⁄8
1
⁄2
3
⁄4
1
11⁄4
11⁄2
2
GENERAL NOTE:
Minimum
Diameter
of
Socket,
A, in.
Minimum
Depth,
B, in.
0.69
0.86
1.06
1.33
1.68
1.92
2.41
0.19
0.19
0.25
0.25
0.25
0.25
0.31
GENERAL NOTE:
See paras. 6.12.4 and 6.12.5.
See paras. 6.12.3, 6.12.5, and 6.12.6.
110
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.1 Pressure–Temperature Ratings for Group 1.1 Materials
Nominal
Designation
Forgings
Castings
Plates
C Si
A105 (1)
C Mn Si
A350 Gr. LF2 (1)
...
C Mn Si V
A350 Gr. LF6 Cl. 1 (3)
...
...
A350 Gr. LF 3
...
...
1
3 ⁄2Ni
A216 Gr. WCB (1)
A515 Gr. 70 (1)
A516 Gr. 70 (1), (2)
A537 Cl. 1 (4)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
285
260
230
200
170
740
680
655
635
605
985
905
870
845
805
1,480
1,360
1,310
1,265
1,205
2,220
2,035
1,965
1,900
1,810
3,705
3,395
3,270
3,170
3,015
6,170
5,655
5,450
5,280
5,025
600
650
700
750
800
140
125
110
95
80
570
550
530
505
410
755
730
710
675
550
1,135
1,100
1,060
1,015
825
1,705
1,650
1,590
1,520
1,235
2,840
2,745
2,655
2,535
2,055
4,730
4,575
4,425
4,230
3,430
850
900
950
1,000
65
50
35
20
320
230
135
85
425
305
185
115
640
460
275
170
955
690
410
255
1,595
1,150
685
430
2,655
1,915
1,145
715
NOTES:
(1) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 800°F.
(2) Not to be used over 850°F.
(3) Not to be used over 500°F.
(4) Not to be used over 700°F.
111
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.2 Pressure–Temperature Ratings for Group 1.2 Materials
Nominal
Designation
Forgings
C Mn Si
C Mn Si
C Mn Si V
Castings
...
...
Plates
A216 Gr. WCC (1)
A352 Gr. LCC (2)
A350 Gr. LF6 Cl. 2 (3)
...
...
...
...
1
...
A352 Gr. LC2
A203 Gr. B (1)
1
...
A352 Gr. LC3 (2)
A203 Gr. E (1)
2 ⁄2Ni
3 ⁄2Ni
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,000
1,000
970
940
885
1,500
1,500
1,455
1,405
1,330
2,250
2,250
2,185
2,110
1,995
3,750
3,750
3,640
3,520
3,325
6,250
6,250
6,070
5,865
5,540
600
650
700
750
800
140
125
110
95
80
605
590
555
505
410
805
785
740
675
550
1,210
1,175
1,110
1,015
825
1,815
1,765
1,665
1,520
1,235
3,025
2,940
2,775
2,535
2,055
5,040
4,905
4,630
4,230
3,430
850
900
950
1,000
65
50
35
20
320
225
135
85
425
295
185
115
640
445
275
170
955
670
410
255
1,595
1,115
685
430
2,655
1,855
1,145
715
NOTES:
(1) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 800°F.
(2) Not to be used over 650°F
(3) Not to be used over 500°F.
112
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.3 Pressure–Temperature Ratings for Group 1.3 Materials
Nominal
Designation
Forgings
Castings
C Si
...
A352 Gr. LCB (1)
C Mn Si
...
...
Plates
A515 Gr. 65 (2)
A516 Gr. 65 (2), (3)
1
...
A217 Gr. WC1 (4) (6)
...
1
...
A352 Gr. LC1 (1)
...
1
2 ⁄2Ni
...
...
A203 Gr. A (2)
1
...
...
A203 Gr. D (2)
C ⁄2Mo
C ⁄2Mo
3 ⁄2Ni
(13)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
265
255
230
200
170
695
660
640
615
585
930
880
850
820
780
1,395
1,320
1,275
1,230
1,175
2,090
1,980
1,915
1,845
1,760
3,480
3,300
3,190
3,075
2,930
5,805
5,505
5,315
5,125
4,885
600
650
700
750
800
140
125
110
95
80
550
535
510
475
390
735
710
685
635
520
1,105
1,065
1,025
955
780
1,655
1,600
1,535
1,430
1,175
2,755
2,665
2,560
2,385
1,955
4,595
4,440
4,270
3,970
3,255
850
900
950
1,000
65
50
35
20
300
200
135
85
400
270
185
115
595
405
275
170
895
605
410
255
1,490
1,010
685
430
2,485
1,685
1,145
715
NOTES:
(1) Not to be used over 650°F.
(2) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 800°F.
(3) Not to be used over 850°F
(4) Upon prolonged exposure to temperatures above 875°F, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 875°F.
(5) Use normalized and tempered material only.
(6) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
113
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.4 Pressure–Temperature Ratings for Group 1.4 Materials
Nominal
Designation
C Si
C Mn Si
Forgings
Castings
Plates
...
...
A515 Gr. 60 (1)
A350 Gr. LF1, Cl.1 (1)
...
A516 Gr. 60 (1), (2)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
235
215
210
200
170
615
565
545
525
500
825
755
725
700
670
1,235
1,130
1,090
1,055
1,005
1,850
1,695
1,635
1,580
1,505
3,085
2,830
2,725
2,635
2,510
5,145
4,715
4,545
4,390
4,185
600
650
700
750
800
140
125
110
95
80
475
455
440
430
370
630
610
590
570
495
945
915
885
855
740
1,420
1,370
1,325
1,285
1,110
2,365
2,285
2,210
2,140
1,850
3,945
3,805
3,685
3,565
3,085
850
900
950
1,000
65
50
35
20
300
170
135
85
400
230
185
115
595
345
275
170
895
515
410
255
1,490
855
685
430
2,485
1,430
1,145
715
NOTES:
(1) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be con
verted to graphite. Permissible but not recommended for prolonged use above 800°F.
(2) Not to be used over 850°F.
114
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.5 Pressure–Temperature Ratings for Group 1.5 Materials
Nominal
Designation
Forgings
Castings
Plates
C 1⁄2Mo
C 1⁄2Mo
A182 Gr. F1 (1)
...
...
...
A204 Gr. A (1)
A204 Gr. B (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
265
260
230
200
695
695
685
660
930
930
915
885
1,395
1,395
1,375
1,325
2,090
2,090
2,060
1,985
3,480
3,480
3,435
3,310
5,805
5,805
5,725
5,520
500
600
650
700
750
170
140
125
110
95
640
605
590
570
530
855
805
785
755
710
1,285
1,210
1,175
1,135
1,065
1,925
1,815
1,765
1,705
1,595
3,210
3,025
2,940
2,840
2,660
5,350
5,040
4,905
4,730
4,430
800
850
900
950
1,000
80
65
50
35
20
510
485
450
280
165
675
650
600
375
220
1,015
975
900
560
330
1,525
1,460
1,350
845
495
2,540
2,435
2,245
1,405
825
4,230
4,060
3,745
2,345
1,370
NOTE:
(1) Upon prolonged exposure to temperatures above 875°F, the carbide phase of carbon molybdenum
steel may be converted to graphite. Permissible but not recommended for prolonged use above
875°F.
115
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.7 Pressure–Temperature Ratings for Group 1.7 Materials
(13)
Nominal
Designation
Forgings
1
⁄2Cr 1⁄2Mo
Castings
Plates
...
...
A182 Gr. F2 (1)
Ni 1⁄2Cr 1⁄2Mo
...
A217 Gr. WC4 (1) (3)
...
3
...
A217 Gr. WC5 (2), (3)
...
⁄4Ni 3⁄4Cr 1Mo
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,000
1,000
970
940
885
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
805
785
755
710
675
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
850
900
950
1,000
1,050
65
50
35
20
...
485
450
315
200
160
650
600
420
270
210
975
900
630
405
315
1,460
1,350
945
605
475
2,435
2,245
1,575
1,010
790
4,060
3,745
2,630
1,685
1,315
NOTES:
(1) Not to be used over 1,000°F.
(2) Use normalized and tempered material only.
(3) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
116
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.9 Pressure–Temperature Ratings for Group 1.9 Materials
Nominal Designation
Forgings
11⁄4Cr 1⁄2Mo
Castings
...
11⁄4Cr 1⁄2Mo Si
Plates
A217 Gr. WC6
(1) (3)
A182 Gr. F11 Cl. 2
(1), (4)
(13)
...
...
A387 Gr. 11
Cl. 2 (4)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
290
260
230
200
750
750
720
695
1,000
1,000
965
925
1,500
1,500
1,445
1,385
2,250
2,250
2,165
2,080
3,750
3,750
3,610
3,465
6,250
6,250
6,015
5,775
500
600
650
700
170
140
125
110
665
605
590
570
885
805
785
755
1,330
1,210
1,175
1,135
1,995
1,815
1,765
1,705
3,325
3,025
2,940
2,840
5,540
5,040
4,905
4,730
750
800
850
900
95
80
65
50
530
510
485
450
710
675
650
600
1,065
1,015
975
900
1,595
1,525
1,460
1,350
2,660
2,540
2,435
2,245
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
320
215
145
95
65
40
425
290
190
130
85
55
640
430
290
190
130
80
955
650
430
290
195
125
1,595
1,080
720
480
325
205
2,655
1,800
1,200
800
545
345
NOTES:
(1) Use normalized and tempered material only.
(2) Not to be used over 1,100°F.
(3) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
(4) Permissible but not recommended for prolonged use above 1,100°F.
117
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table II-2-1.10 Pressure–Temperature Ratings for Group 1.10 Materials
Nominal Designation
21⁄4Cr 1Mo
Forgings
Castings
Plates
A182 Gr. F22 Cl. 3 (1)
A217 Gr. WC9 (2) (4)
A387 Gr. 22 Cl. 2 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
290
260
230
200
750
750
730
705
1,000
1,000
970
940
1,500
1,500
1,455
1,410
2,250
2,250
2,185
2,115
3,750
3,750
3,640
3,530
6,250
6,250
6,070
5,880
500
600
650
700
170
140
125
110
665
605
590
570
885
805
785
755
1,330
1,210
1,175
1,135
1,995
1,815
1,765
1,705
3,325
3,025
2,940
2,840
5,540
5,040
4,905
4,730
750
800
850
900
95
80
65
50
530
510
485
450
710
675
650
600
1,065
1,015
975
900
1,595
1,525
1,460
1,350
2,660
2,540
2,435
2,245
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
265
175
110
70
40
515
355
235
145
90
55
775
535
350
220
135
80
1,160
800
525
330
205
125
1,930
1,335
875
550
345
205
3,220
2,230
1,455
915
570
345
NOTES:
(1) Permissible but not recommended for prolonged use above 1,100°F.
(2) Use normalized and tempered material only.
(3) Not to be used over 1,100°F.
(4) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
118
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.11 Pressure–Temperature Ratings for Group 1.11 Materials
Nominal Designation
Forgings
Castings
...
...
1
C ⁄2Mo
Plates
A204, Gr. C (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
290
260
230
200
750
750
730
705
1,000
1,000
970
940
1,500
1,500
1,455
1,410
2,250
2,250
2,185
2,115
3,750
3,750
3,640
3,530
6,250
6,250
6,070
5,880
500
600
650
700
170
140
125
110
665
605
590
570
885
805
785
755
1,330
1,210
1,175
1,135
1,995
1,815
1,765
1,705
3,325
3,025
2,940
2,840
5,540
5,040
4,905
4,730
750
800
850
900
95
80
65
50
530
510
485
450
710
675
650
600
1,065
1,015
975
900
1,595
1,525
1,460
1,345
2,660
2,540
2,435
2,245
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
280
165
165
110
80
45
375
220
220
145
110
60
560
330
330
220
165
90
845
495
495
330
245
135
1,405
825
825
550
410
225
2,345
1,370
1,370
915
685
370
NOTE:
(1) Upon prolonged exposure to temperatures above 875°F, the carbide phase of carbon molybdenum
steel may be converted to graphite. Permissible but not recommended for prolonged use above
875°F.
119
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table II-2-1.13 Pressure–Temperature Ratings for Group 1.13 Materials
Nominal Designation
5Cr 1⁄2Mo
Forgings
Castings
A182 Gr. F5a
Plates
A217 Gr. C5 (1), (2)
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
750
730
705
665
605
1,000
1,000
970
940
885
805
1,500
1,500
1,455
1,410
1,330
1,210
2,250
2,250
2,185
2,115
1,995
1,815
3,750
3,750
3,640
3,530
3,325
3,025
6,250
6,250
6,070
5,880
5,540
5,040
650
700
750
800
850
900
125
110
95
80
65
50
590
570
530
510
485
375
785
755
710
675
650
500
1,175
1,135
1,065
1,015
975
745
1,765
1,705
1,595
1,525
1,460
1,120
2,940
2,840
2,660
2,540
2,435
1,870
4,905
4,730
4,430
4,230
4,060
3,115
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
275
200
145
100
60
35
365
265
190
135
80
45
550
400
290
200
125
70
825
595
430
300
185
105
1,370
995
720
495
310
170
2,285
1,655
1,200
830
515
285
NOTES:
(1) Use normalized and tempered material only.
(2) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
120
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.14 Pressure–Temperature Ratings for Group 1.14 Materials
Nominal Designation
9Cr 1Mo
Forgings
Castings
A182 Gr. F9
Plates
A217 Gr. C12 (1), (2)
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
750
730
705
665
605
1,000
1,000
970
940
885
805
1,500
1,500
1,455
1,410
1,330
1,210
2,250
2,250
2,185
2,115
1,995
1,815
3,750
3,750
3,640
3,530
3,325
3,025
6,250
6,250
6,070
5,880
5,540
5,040
650
700
750
800
850
900
125
110
95
80
65
50
590
570
530
510
485
450
785
755
710
675
650
600
1,175
1,135
1,065
1,015
975
900
1,765
1,705
1,595
1,525
1,460
1,350
2,940
2,840
2,660
2,540
2,435
2,245
4,905
4,730
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
375
255
170
115
75
50
505
340
230
150
100
70
755
505
345
225
150
105
1,130
760
515
340
225
155
1,885
1,270
855
565
375
255
3,145
2,115
1,430
945
630
430
NOTES:
(1) Use normalized and tempered material only.
(2) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
121
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
ASME B16.5-2013
(13)
Table II-2-1.15 Pressure–Temperature Ratings for Group 1.15 Materials
Nominal Designation
9Cr 1Mo V
Forgings
Castings
A182 Gr. F91
Plates
A217 Gr. C12 A (1)
A387 Gr. 91 Cl. 2
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
750
730
705
665
605
1,000
1,000
970
940
885
805
1,500
1,500
1,455
1,410
1,330
1,210
2,250
2,250
2,185
2,115
1,995
1,815
3,750
3,750
3,640
3,530
3,325
3,025
6,250
6,250
6,070
5,880
5,540
5,040
650
700
750
800
850
900
125
110
95
80
65
50
590
570
530
510
485
450
785
755
710
675
650
600
1,175
1,135
1,065
1,015
975
900
1,765
1,705
1,595
1,525
1,460
1,350
2,940
2,840
2,660
2,540
2,435
2,245
4,905
4,730
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
360
300
225
145
515
485
480
400
295
190
775
725
720
605
445
290
1,160
1,090
1,080
905
670
430
1,930
1,820
1,800
1,510
1,115
720
3,220
3,030
3,000
2,515
1,855
1,200
NOTE:
(1) The deliberate addition of any element not listed in ASTM A217, Table 1 is prohibited, except that
calcium (Ca) and manganese (Mn) may be added for deoxidation.
122
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.17 Pressure–Temperature Ratings for Group 1.17 Materials
Nominal Designation
1Cr 1⁄2Mo
5Cr 1⁄2Mo
Forgings
A182 Gr. F12 Cl. 2 (1), (2)
A182 Gr. F5
Castings
Plates
...
...
...
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
735
700
670
645
605
1,000
980
935
890
860
805
1,500
1,470
1,400
1,335
1,290
1,210
2,250
2,210
2,100
2,005
1,940
1,815
3,750
3,680
3,495
3,345
3,230
3,025
6,250
6,135
5,830
5,570
5,385
5,040
650
700
750
800
850
900
125
110
95
80
65
50
590
570
530
510
485
375
785
755
710
675
650
500
1,175
1,135
1,065
1,015
975
745
1,765
1,705
1,595
1,525
1,460
1,120
2,940
2,840
2,660
2,540
2,435
1,870
4,905
4,730
4,430
4,230
4,060
3,115
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
275
200
145
95
60
35
365
265
190
130
80
45
550
400
290
190
125
70
825
595
430
290
185
105
1,370
995
720
480
310
170
2,285
1,655
1,200
800
515
285
NOTES:
(1) Use normalized and tempered material only.
(2) Permissible but not recommended for prolonged use above 1,100°F.
123
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-1.18 Pressure–Temperature Ratings for Group 1.18 Materials
Nominal Designation
9Cr 2W V
Forgings
A182 Gr. F92 (1)
Castings
Plates
...
...
Working Pressures by Class, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
750
730
705
665
605
1,000
1,000
970
940
885
805
1,500
1,500
1,455
1,410
1,330
1,210
2,250
2,250
2,185
2,115
1,995
1,815
3,750
3,750
3,640
3,530
3,325
3,025
6,250
6,250
6,070
5,880
5,540
5,040
650
700
750
800
850
900
125
110
95
80
65
50
590
570
530
510
485
450
785
755
710
675
650
600
1,175
1,135
1,065
1,015
975
900
1,765
1,705
1,595
1,525
1,460
1,350
2,940
2,840
2,660
2,540
2,435
2,245
4,905
4,730
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
20
20
20
20
385
365
360
325
275
205
515
485
480
430
365
275
775
725
720
645
550
410
1,160
1,090
1,080
965
825
620
1,930
1,820
1,800
1,610
1,370
1,030
3,220
3,030
3,000
2,685
2,285
1,715
NOTE:
(1) Application above 1,150°F is limited to tubing of maximum outside diameter of 31⁄2 in.
124
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.1 Pressure–Temperature Ratings for Group 2.1 Materials
Nominal
Designation
Forgings
Castings
Plates
18Cr 8Ni
A182 Gr. F304 (1)
A351 Gr. CF3 (2)
A240 Gr. 304 (1)
18Cr 8Ni
A182 Gr. F304H
A351 Gr. CF8 (1)
A240 Gr. 304H
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
230
205
190
170
140
720
600
540
495
465
440
960
800
715
660
620
590
1,440
1,200
1,075
995
930
885
2,160
1,800
1,615
1,490
1,395
1,325
3,600
3,000
2,690
2,485
2,330
2,210
6,000
5,000
4,480
4,140
3,880
3,680
650
700
750
800
850
900
125
110
95
80
65
50
430
420
415
405
395
390
575
565
550
540
530
520
865
845
825
810
790
780
1,295
1,265
1,240
1,215
1,190
1,165
2,160
2,110
2,065
2,030
1,980
1,945
3,600
3,520
3,440
3,380
3,300
3,240
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
380
355
325
255
205
165
510
470
435
345
275
220
765
710
650
515
410
330
1,145
1,065
975
770
615
495
1,910
1,770
1,630
1,285
1,030
825
3,180
2,950
2,715
2,145
1,715
1,370
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
135
115
95
75
60
40
180
150
125
100
80
55
265
225
185
150
115
85
400
340
280
225
175
125
670
565
465
380
290
205
1,115
945
770
630
485
345
NOTES:
(1) At temperatures over 1,000°F, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 800°F.
125
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.2 Pressure–Temperature Ratings for Group 2.2 Materials
Nominal
Designation
Forgings
Castings
Plates
16Cr 12Ni 2Mo
16Cr 12Ni 2Mo
A182 Gr. F316 (1)
A182 Gr. F316H
A351 Gr. CF3M (2)
A351 Gr. CF8M (1)
A240 Gr. 316 (1)
A240 Gr. 316H
18Cr 13Ni 3Mo
A182 Gr. F317 (1)
...
A240 Gr. 317 (1)
19Cr 10Ni 3Mo
...
A351 Gr. CG8M (3)
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
235
215
195
170
140
720
620
560
515
480
450
960
825
745
685
635
600
1,440
1,240
1,120
1,025
955
900
2,160
1,860
1,680
1,540
1,435
1,355
3,600
3,095
2,795
2,570
2,390
2,255
6,000
5,160
4,660
4,280
3,980
3,760
650
700
750
800
850
900
125
110
95
80
65
50
440
435
425
420
420
415
590
580
570
565
555
555
885
870
855
845
835
830
1,325
1,305
1,280
1,265
1,255
1,245
2,210
2,170
2,135
2,110
2,090
2,075
3,680
3,620
3,560
3,520
3,480
3,460
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
360
305
235
185
515
485
480
405
315
245
775
725
720
610
475
370
1,160
1,090
1,080
915
710
555
1,930
1,820
1,800
1,525
1,185
925
3,220
3,030
3,000
2,545
1,970
1,545
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
145
115
95
75
60
40
195
155
130
100
80
55
295
235
190
150
115
85
440
350
290
225
175
125
735
585
480
380
290
205
1,230
970
800
630
485
345
NOTES:
(1) At temperatures over 1,000°F, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 850°F.
(3) Not to be used over 1,000°F.
126
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.3 Pressure–Temperature Ratings for Group 2.3 Materials
Nominal
Designation
Forgings
16Cr 12Ni 2Mo
18Cr 13Ni 3Mo
18Cr 8Ni
Castings
A182 Gr. F316L
A182 Gr. F317L
A182 Gr. F304L (1)
Plates
...
...
...
A240 Gr. 316L
...
A240 Gr. 304L (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
230
195
175
160
150
600
510
455
420
395
800
680
610
560
525
1,200
1,020
910
840
785
1,800
1,535
1,370
1,260
1,180
3,000
2,555
2,280
2,100
1,970
5,000
4,260
3,800
3,500
3,280
600
650
700
750
800
850
140
125
110
95
80
65
370
365
360
355
345
340
495
485
480
470
460
450
745
730
720
705
690
675
1,115
1,095
1,080
1,060
1,035
1,015
1,860
1,825
1,800
1,765
1,730
1,690
3,100
3,040
3,000
2,940
2,880
2,820
NOTE:
(1) Not to be used over 800°F.
127
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.4 Pressure–Temperature Ratings for Group 2.4 Materials
Nominal
Designation
Forgings
18Cr 10Ni Ti
18Cr 10Ni Ti
Castings
A182 Gr. F321 (1)
A182 Gr. F321H (2)
Plates
...
...
A240 Gr. 321 (1)
A240 Gr. 321H (2)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
250
230
200
170
140
720
650
595
550
515
485
960
865
795
735
690
650
1,440
1,295
1,190
1,105
1,030
975
2,160
1,945
1,785
1,655
1,550
1,460
3,600
3,240
2,975
2,760
2,580
2,435
6,000
5,400
4,960
4,600
4,300
4,060
650
700
750
800
850
900
125
110
95
80
65
50
475
465
460
450
445
440
635
620
610
600
595
590
950
930
915
900
895
885
1,425
1,395
1,375
1,355
1,340
1,325
2,375
2,330
2,290
2,255
2,230
2,210
3,960
3,880
3,820
3,760
3,720
3,680
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
360
310
235
185
515
485
480
415
315
245
775
725
720
625
475
370
1,160
1,090
1,080
935
710
555
1,930
1,820
1,800
1,560
1,185
925
3,220
3,030
3,000
2,600
1,970
1,545
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
140
110
85
65
50
40
185
145
115
85
70
50
280
220
170
130
105
75
420
330
255
195
155
115
705
550
430
325
255
190
1,170
915
715
545
430
315
NOTES:
(1) Not to be used over 1,000°F.
(2) At temperatures over 1,000°F, use only if the material is heat treated by heating to a minimum
temperature of 2,000°F.
128
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.5 Pressure–Temperature Ratings for Group 2.5 Materials
Nominal Designation
18Cr
18Cr
18Cr
18Cr
10Ni
10Ni
10Ni
10Ni
Cb
Cb
Cb
Cb
Forgings
A182
A182
A182
A182
Gr.
Gr.
Gr.
Gr.
Castings
F347 (1)
F347H (2)
F348 (1)
F348H (2)
Plates
...
...
...
...
A240
A240
A240
A240
Gr.
Gr.
Gr.
Gr.
347 (1)
347H (2)
348 (1)
348H (2)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
255
230
200
170
140
720
660
615
575
540
515
960
885
820
770
725
690
1,440
1,325
1,235
1,150
1,085
1,030
2,160
1,985
1,850
1,730
1,625
1,550
3,600
3,310
3,085
2,880
2,710
2,580
6,000
5,520
5,140
4,800
4,520
4,300
650
700
750
800
850
900
125
110
95
80
65
50
505
495
490
485
485
450
675
660
655
650
645
600
1,015
995
985
975
970
900
1,520
1,490
1,475
1,460
1,455
1,350
2,530
2,485
2,460
2,435
2,425
2,245
4,220
4,140
4,100
4,060
4,040
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
360
325
275
205
515
485
480
430
365
275
775
725
720
645
550
410
1,160
1,090
1,080
965
825
620
1,930
1,820
1,800
1,610
1,370
1,030
3,220
3,030
3,000
2,685
2,285
1,715
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
180
140
105
75
60
40
245
185
140
100
80
55
365
275
205
150
115
85
545
410
310
225
175
125
910
685
515
380
290
205
1,515
1,145
860
630
485
345
NOTES:
(1) Not to be used over 1,000°F.
(2) For temperatures over 1,000°F use only if the material is heat treated by heating to a minimum
temperature of 2,000°F.
129
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.6 Pressure–Temperature Ratings for Group 2.6 Materials
Nominal Designation
Forgings
Castings
...
...
23Cr 12Ni
Plates
A240 Gr. 309H
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
240
225
200
170
140
720
630
580
545
520
500
960
840
775
725
690
665
1,440
1,260
1,160
1,090
1,035
1,000
2,160
1,895
1,740
1,635
1,555
1,500
3,600
3,155
2,905
2,725
2,590
2,495
6,000
5,260
4,840
4,540
4,320
4,160
650
700
750
800
850
900
125
110
95
80
65
50
490
485
480
475
465
450
655
645
640
630
620
600
985
970
960
945
930
900
1,475
1,455
1,440
1,420
1,395
1,350
2,460
2,425
2,400
2,365
2,330
2,245
4,100
4,040
4,000
3,940
3,880
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
355
260
190
135
515
485
470
345
250
185
775
725
705
520
375
275
1,160
1,090
1,060
780
565
410
1,930
1,820
1,765
1,305
945
685
3,220
3,030
2,945
2,170
1,570
1,145
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
105
75
60
45
35
25
135
100
80
60
45
35
205
150
115
90
70
50
310
225
175
135
105
75
515
375
290
225
170
130
855
630
485
370
285
215
130
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.7 Pressure–Temperature Ratings for Group 2.7 Materials
Nominal
Designation
Forgings
25Cr 20Ni
Castings
Plates
...
A240 Gr. 310H
A182 Gr. F310 (1), (2)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
245
225
200
170
140
720
635
580
540
515
495
960
850
775
725
685
660
1,440
1,270
1,160
1,085
1,025
990
2,160
1,910
1,740
1,625
1,540
1,485
3,600
3,180
2,905
2,710
2,570
2,470
6,000
5,300
4,840
4,520
4,280
4,120
650
700
750
800
850
900
125
110
95
80
65
50
485
480
470
465
460
450
645
635
625
620
610
600
970
955
940
930
915
900
1,455
1,435
1,410
1,395
1,375
1,350
2,425
2,390
2,350
2,330
2,290
2,245
4,040
3,980
3,920
3,880
3,820
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
355
260
190
135
515
485
470
345
250
185
775
725
705
520
375
275
1,160
1,090
1,060
780
565
410
1,930
1,820
1,765
1,305
945
685
3,220
3,030
2,945
2,170
1,570
1,145
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
105
75
60
45
35
25
135
100
80
60
45
35
205
150
115
90
65
50
310
225
175
135
100
75
515
375
290
225
165
130
855
630
485
370
275
215
NOTES:
(1) At temperatures over 1,000°F, use only when the carbon content is 0.04% or higher.
(2) Service temperatures of 1,050°F and above should be used only when assurance is provided that
grain size is not finer than ASTM 6.
131
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table II-2-2.8 Pressure–Temperature Ratings for Group 2.8 Materials
Nominal Designation
Forgings
Castings
Plates
20Cr 18Ni 6Mo
A182 Gr. F44
A351 Gr. CK3MCuN
A240 Gr. S31254
22Cr 5Ni 3Mo N
A182 Gr.
F51 (1)
...
A240 Gr.
S31803 (1)
25Cr 7Ni 4Mo N
A182 Gr.
F53 (1)
...
A240 Gr.
S32750 (1)
24Cr 10Ni 4Mo V
...
A351 Gr. CE8MN (1)
...
25Cr 5Ni 2Mo 3Cu
...
A351 Gr.
CD4MCu (1)
...
25Cr 7Ni 3.5Mo W Cb
...
A351 Gr.
CD3MWCuN (1)
...
25Cr 7Ni 3.5Mo N Cu W
A182 Gr.
F55 (1)
...
A240 Gr.
S32760 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
290
260
230
750
745
665
1,000
990
890
1,500
1,490
1,335
2,250
2,230
2,000
3,750
3,720
3,335
6,250
6,200
5,560
400
500
600
200
170
140
615
580
555
820
775
740
1,230
1,160
1,115
1,845
1,740
1,670
3,070
2,905
2,785
5,120
4,840
4,640
650
700
750
125
110
95
545
540
530
730
725
710
1,095
1,085
1,065
1,640
1,625
1,595
2,735
2,710
2,660
4,560
4,520
4,430
NOTE:
(1) This steel may become brittle after service at moderately elevated temperatures. Not to be used
over 600°F.
132
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.9 Pressure–Temperature Ratings for Group 2.9 Materials
Nominal
Designation
Forgings
Castings
23Cr 12Ni
25Cr 20Ni
...
...
...
...
Plates
A240 Gr. 309S (1) (3)
A240 Gr. 310S (1) (3)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
240
225
200
170
140
720
630
580
540
515
495
960
840
775
725
685
660
1,440
1,260
1,160
1,085
1,025
990
2,160
1,895
1,740
1,625
1,540
1,485
3,600
3,155
2,905
2,710
2,570
2,470
6,000
5,260
4,840
4,520
4,280
4,120
650
700
750
800
850
900
125
110
95
80
65
50
485
480
470
465
460
450
645
635
625
620
610
600
970
955
940
930
915
900
1,455
1,435
1,410
1,395
1,375
1,350
2,425
2,390
2,350
2,330
2,290
2,245
4,040
3,980
3,920
3,880
3,820
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
340
245
170
125
85
515
455
325
230
165
115
775
680
485
345
245
170
1,160
1,020
730
515
370
255
1,930
1,695
1,215
855
615
430
3,220
2,830
2,030
1,430
1,030
715
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
50
25
15
15
10
5
70
35
25
20
15
10
105
55
35
25
20
15
155
80
50
40
30
20
255
135
85
70
50
35
430
230
145
115
85
55
NOTES:
(1) At temperatures over 1,000°F, use only when the carbon content is 0.04% or higher.
(2) At temperatures above 1,000°F, use only if the material is solution heat treated to the minimum
temperature specified in the specification, but not lower than 1,900°F, and quenching in water or
rapidly cooling by other means.
(3) This material should be used for service temperatures 1,050°F and above only when assurance is
provided that grain size is not finer than ASTM 6.
133
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.10 Pressure–Temperature Ratings for Group 2.10 Materials
Nominal Designation
25Cr 12Ni
25Cr 12Ni
Forgings
Castings
...
...
Plates
A351 Gr. CH8 (1)
A351 Gr. CH20 (1)
...
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
260
210
195
185
170
140
670
550
505
485
470
455
895
735
675
645
625
610
1,345
1,100
1,015
970
940
910
2,015
1,650
1,520
1,455
1,410
1,370
3,360
2,750
2,530
2,425
2,350
2,280
5,600
4,580
4,220
4,040
3,920
3,800
650
700
750
800
850
900
125
110
95
80
65
50
445
435
420
410
400
385
595
580
565
545
530
510
895
870
845
820
795
770
1,340
1,305
1,265
1,230
1,195
1,150
2,230
2,170
2,110
2,050
1,990
1,920
3,720
3,620
3,520
3,420
3,320
3,200
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
370
340
290
225
170
130
495
450
390
295
230
175
740
675
585
445
345
260
1,110
1,015
875
670
515
390
1,850
1,690
1,455
1,115
855
650
3,080
2,820
2,430
1,855
1,430
1,085
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
100
80
60
45
30
25
135
105
80
60
40
35
200
160
125
90
60
55
300
235
185
135
95
80
495
395
310
225
155
135
830
655
515
370
255
230
NOTE:
(1) At temperatures over 1,000°F, use only when the carbon content is 0.04% or higher.
134
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.11 Pressure–Temperature Ratings for Group 2.11 Materials
Nominal Designation
Forgings
18Cr 10Ni Cb
Castings
...
Plates
A351 Gr. CF8C (1)
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
255
230
200
170
140
720
660
615
575
540
515
960
885
820
770
725
690
1,440
1,325
1,235
1,150
1,085
1,030
2,160
1,985
1,850
1,730
1,625
1,550
3,600
3,310
3,085
2,880
2,710
2,580
6,000
5,520
5,140
4,800
4,520
4,300
650
700
750
800
850
900
125
110
95
80
65
50
505
495
490
485
485
450
675
660
655
650
645
600
1,015
995
985
975
970
900
1,520
1,490
1,475
1,460
1,455
1,350
2,530
2,485
2,460
2,435
2,425
2,245
4,220
4,140
4,100
4,060
4,040
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
360
310
210
150
515
485
480
415
280
200
775
725
720
625
420
300
1,160
1,090
1,080
935
625
455
1,930
1,820
1,800
1,560
1,045
755
3,220
3,030
3,000
2,600
1,745
1,255
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
115
75
50
40
30
25
150
100
70
55
40
35
225
150
105
80
60
55
340
225
155
125
95
80
565
375
255
205
155
135
945
630
430
345
255
230
NOTE:
(1) At temperatures over 1,000°F, use only when the carbon content is 0.04% or higher.
135
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-2.12 Pressure–Temperature Ratings for Group 2.12 Materials
Nominal Designation
25Cr 20Ni
Forgings
Castings
...
Plates
A351 Gr. CK20 (1)
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
260
210
195
185
170
140
670
550
505
485
470
455
895
735
675
645
625
610
1,345
1,100
1,015
970
940
910
2,015
1,650
1,520
1,455
1,410
1,370
3,360
2,750
2,530
2,425
2,350
2,280
5,600
4,580
4,220
4,040
3,920
3,800
650
700
750
800
850
900
125
110
95
80
65
50
445
435
420
410
400
385
595
580
565
545
530
510
895
870
845
820
795
770
1,340
1,305
1,265
1,230
1,195
1,150
2,230
2,170
2,110
2,050
1,990
1,920
3,720
3,620
3,520
3,420
3,320
3,200
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
370
340
325
290
250
205
495
450
435
390
335
275
740
675
650
585
500
410
1,110
1,015
975
875
750
615
1,850
1,690
1,630
1,455
1,250
1,030
3,080
2,820
2,715
2,430
2,085
1,715
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
165
120
80
55
40
25
220
160
110
75
50
35
330
240
165
110
75
55
495
360
245
165
115
80
825
600
410
275
190
135
1,370
1,000
685
455
315
230
NOTE:
(1) At temperatures over 1,000°F, use only when the carbon content is 0.04% or higher.
136
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.1 Pressure–Temperature Ratings for Group 3.1 Materials
Nominal
Designation
Forgings
Castings
Plates
35Ni 35Fe 20Cr Cb
B462 Gr. N08020 (1)
...
B463 Gr. N08020 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
290
260
230
200
170
750
740
710
680
655
1,000
990
945
910
875
1,500
1,485
1,420
1,365
1,310
2,250
2,225
2,130
2,045
1,965
3,750
3,710
3,550
3,410
3,275
6,250
6,180
5,920
5,680
5,460
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
805
785
755
710
675
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
NOTE:
(1) Use annealed material only.
Table II-2-3.2 Pressure–Temperature Ratings for Group 3.2 Materials
(13)
Nominal
Designation
Forgings
Castings
Plates
99.0Ni
B564 Gr. N02200 (1)
...
B162 Gr. N02200 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
185
185
185
480
480
480
640
640
640
960
960
960
1,440
1,440
1,440
2,400
2,400
2,400
4,000
4,000
4,000
400
500
600
185
170
140
480
455
415
640
605
550
960
905
825
1,440
1,360
1,240
2,400
2,270
2,065
4,000
3,780
3,440
NOTE:
(1) Use annealed material only.
137
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.3 Pressure–Temperature Ratings for Group 3.3 Materials
Nominal Designation
99.0Ni Low C
Forgings
Castings
...
...
Plates
B162 Gr. N02201 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
20 to 100
200
300
400
500
90
90
85
85
85
240
230
225
225
225
320
305
300
300
300
480
460
450
450
450
600
650
700
750
800
85
85
85
85
80
225
225
225
220
215
300
300
300
295
290
850
900
950
1,000
1,050
65
50
35
20
...
210
205
195
190
80
1,100
1,150
1,200
...
...
...
70
50
40
900
1500
2500
720
690
675
675
675
1,200
1,150
1,130
1,130
1,130
2,000
1,920
1,880
1,880
1,880
450
445
445
440
430
675
670
670
660
650
1,130
1,115
1,115
1,105
1,080
1,880
1,860
1,860
1,840
1,800
280
275
260
255
110
420
415
395
380
165
635
620
590
570
245
1,055
1,030
985
950
410
1,760
1,720
1,640
1,580
685
90
70
55
135
105
80
205
155
125
345
255
205
570
430
345
NOTE:
(1) Use annealed material only.
138
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.4 Pressure–Temperature Ratings for Group 3.4 Materials
Nominal Designation
67Ni 30Cu
Forgings
Castings
B564 Gr. N04400 (1)
Plates
...
B127 Gr. N04400 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
230
200
190
180
600
525
490
475
800
700
655
630
1,200
1,050
980
945
1,800
1,575
1,470
1,420
3,000
2,630
2,450
2,365
5,000
4,380
4,080
3,940
500
600
650
700
170
140
125
110
475
475
475
470
630
630
630
625
945
945
945
940
1,420
1,420
1,420
1,410
2,365
2,365
2,365
2,350
3,940
3,940
3,940
3,920
750
800
850
900
95
80
65
50
465
460
375
275
620
610
505
365
930
915
755
550
1,395
1,375
1,130
825
2,330
2,290
1,885
1,370
3,880
3,820
3,145
2,285
NOTE:
(1) Use annealed material only.
139
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.5 Pressure–Temperature Ratings for Group 3.5 Materials
Nominal
Designation
Forgings
72Ni 15Cr 8Fe
Castings
B564 Gr. N06600 (1)
Plates
...
B168 Gr. N06600 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
750
730
705
665
605
1,000
1,000
970
940
885
805
1,500
1,500
1,455
1,410
1,330
1,210
2,250
2,250
2,185
2,115
1,995
1,815
3,750
3,750
3,640
3,530
3,325
3,025
6,250
6,250
6,070
5,880
5,540
5,040
650
700
750
800
850
900
125
110
95
80
65
50
590
570
530
510
485
450
785
755
710
675
650
600
1,175
1,135
1,065
1,015
975
900
1,765
1,705
1,595
1,525
1,460
1,350
2,940
2,840
2,660
2,540
2,435
2,245
4,905
4,730
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
365
240
155
105
75
70
485
320
205
135
100
90
725
480
310
205
150
135
1,090
720
465
310
225
205
1,815
1,200
770
515
375
345
3,030
2,000
1,285
855
630
570
NOTE:
(1) Use annealed material only.
140
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.6 Pressure–Temperature Ratings for Group 3.6 Materials
Nominal Designation
33Ni 42Fe 21Cr
Forgings
Castings
B564 Gr. N08800 (1)
Plates
...
B409 Gr. N08800 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
255
230
200
170
140
720
665
640
620
600
590
960
885
850
825
805
785
1,440
1,330
1,275
1,240
1,205
1,175
2,160
1,995
1,915
1,860
1,805
1,765
3,600
3,325
3,190
3,095
3,010
2,940
6,000
5,540
5,320
5,160
5,020
4,900
650
700
750
800
850
900
125
110
95
80
65
50
580
570
530
510
485
450
770
755
710
675
650
600
1,155
1,135
1,065
1,015
975
900
1,735
1,705
1,595
1,525
1,460
1,350
2,890
2,840
2,660
2,540
2,435
2,245
4,820
4,730
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
360
325
275
205
515
485
480
430
365
275
775
725
720
645
550
410
1,160
1,090
1,080
965
825
620
1,930
1,820
1,800
1,610
1,370
1,030
3,220
3,030
3,000
2,685
2,285
1,715
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
145
70
55
40
35
25
190
90
75
50
45
35
290
135
110
75
70
55
430
205
165
115
105
80
720
345
275
190
170
135
1,200
570
455
315
285
230
NOTE:
(1) Use annealed material only.
141
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.7 Pressure–Temperature Ratings for Group 3.7 Materials
Nominal Designation
Forgings
Castings
Plates
65Ni 28Mo 2Fe
B462 Gr. N10665 (1)
...
B333 Gr. N10665 (1)
64Ni 29.5Mo 2Cr 2Fe Mn W
B462 Gr. N10675 (1)
...
B333 Gr. N10675 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,000
1,000
970
940
885
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
805
785
755
710
675
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
NOTE:
(1) Use solution annealed material only.
142
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.8 Pressure–Temperature Ratings for Group 3.8 Materials
Nominal Designation
Forgings
Castings
Plates
54Ni 16Mo 15Cr
B462 Gr. N10276
(1), (2)
...
B575 Gr. N10276 (1), (2)
60Ni 22Cr 9Mo 3.5Cb
B564 Gr. N06625
(3) (5)
...
B443 Gr. N06625 (3) (5)
62Ni 28Mo 5Fe
...
...
B333 Gr. N10001 (1), (6)
70Ni 16Mo 7Cr 5Fe
...
...
B434 Gr. N10003 (3)
61Ni 16Mo 16Cr
...
...
B575 Gr. N06455 (1), (6)
42Ni 21.5Cr 3Mo 2.3Cu
B564 Gr. N08825
(3), (7)
...
B424 Gr. N08825 (3), (7)
55Ni 21Cr 13.5Mo
B462 Gr. N06022
(1), (2), (8)
...
B575 Gr. N06022
(1), (2), (8)
55Ni 23Cr 16Mo 1.6Cu
B462 Gr. N06200
(1), (6)
...
B575 Gr. N06200 (1), (6)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
700
665
1,000
1,000
970
930
885
1,500
1,500
1,455
1,395
1,330
2,250
2,250
2,185
2,095
1,995
3,750
3,750
3,640
3,490
3,325
6,250
6,250
6,070
5,820
5,540
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
805
785
755
710
675
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
850
900
950
1,000
1,050
65
50
35
20
...
485
450
385
365
360
650
600
515
485
480
975
900
775
725
720
1,460
1,350
1,160
1,090
1,080
2,435
2,245
1,930
1,820
1,800
4,060
3,745
3,220
3,030
3,000
1,100
1,150
1,200
1,250
1,300
...
...
...
...
...
325
275
205
165
120
430
365
275
220
160
645
550
410
330
240
965
825
615
495
360
1,610
1,370
1,030
825
600
2,685
2,285
1,715
1,370
1,000
NOTES:
(1) Use solution annealed material only.
(2) Not to be used over 1,250°F.
(3) Use annealed material only.
(4) Not to be used over 1,200°F. Alloy N06625 in the annealed condition is subject to severe loss of
impact strength at room temperatures after exposure in the range of 1,000°F to 1,400°F.
(5) Grade 1.
(6) Not to be used over 800°F.
(7) Not to be used over 1,000°F.
(8) Alloy N06022 in the solution annealed condition is subject to severe loss of impact strength at
room temperature after exposure to temperatures in the range of 1,000°F to 1,250°F.
143
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.9 Pressure–Temperature Ratings for Group 3.9 Materials
Nominal Designation
Forgings
Castings
...
...
B435 Gr. N06002 (1)
B572 Gr. R30556 (1)
...
B435 Gr. R30556 (1)
47Ni 22Cr 9Mo 18Fe
21Ni 30Fe 22Cr 18Co 3Mo 3W
Plates
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
750
690
640
595
565
1,000
1,000
920
850
795
750
1,500
1,500
1,380
1,275
1,190
1,130
2,250
2,250
2,075
1,915
1,785
1,690
3,750
3,750
3,455
3,190
2,975
2,820
6,250
6,250
5,760
5,320
4,960
4,700
650
700
750
800
850
900
125
110
95
80
65
50
550
540
530
510
485
450
735
725
710
675
650
600
1,105
1,085
1,065
1,015
975
900
1,655
1,625
1,595
1,525
1,460
1,350
2,760
2,710
2,660
2,540
2,435
2,245
4,600
4,520
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
360
325
275
205
515
485
480
430
365
275
775
725
720
645
550
410
1,160
1,090
1,080
965
825
620
1,930
1,820
1,800
1,610
1,370
1,030
3,220
3,030
3,000
2,685
2,285
1,715
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
180
140
105
75
60
40
245
185
140
100
80
55
365
275
205
150
115
85
545
410
310
225
175
125
910
685
515
380
290
205
1,515
1,145
860
630
485
345
NOTE:
(1) Use solution annealed material only.
144
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.10 Pressure–Temperature Ratings for Group 3.10 Materials
Nominal Designation
Forgings
Castings
25Ni 47Fe 21Cr 5Mo
...
...
Plates
B599 Gr. N08700 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
650
290
260
230
200
170
140
125
750
750
685
640
615
595
570
1,000
1,000
910
850
820
790
760
1,500
1,500
1,370
1,275
1,235
1,185
1,140
2,250
2,250
2,050
1,915
1,850
1,780
1,715
3,750
3,750
3,420
3,190
3,085
2,965
2,855
6,250
6,250
5,700
5,320
5,140
4,940
4,760
NOTE:
(1) Use solution annealed material only.
145
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
(13)
Table II-2-3.11 Pressure–Temperature Ratings for Group 3.11 Materials
Nominal
Designation
Forgings
44Fe 25Ni 21Cr Mo
Castings
A479 Gr. N08904 (1), (2)
...
Plates
A240 Gr. N08904 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
285
230
210
190
745
600
545
500
990
805
725
665
1,490
1,205
1,090
1,000
2,230
1,805
1,635
1,500
3,720
3,010
2,725
2,495
6,200
5,020
4,540
4,160
500
600
650
700
170
140
125
110
455
425
420
410
610
570
555
545
910
855
835
820
1,370
1,280
1,255
1,230
2,280
2,135
2,090
2,050
3,800
3,560
3,480
3,420
NOTES:
(1) Use annealed material only.
(2) The chemical composition, mechanical properties, heat treating requirements, and grain size
requirements shall conform to the applicable ASTM specification. The manufacturing procedures,
tolerances, tests, certification, and markings shall be in accordance with ASTM B564.
146
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.12 Pressure–Temperature Ratings for Group 3.12 Materials
Nominal Designation
Forgings
Castings
26Ni 43Fe 22Cr 5Mo
...
...
B620 Gr.
N08320 (1)
47Ni 22Cr 20Fe 7Mo
...
...
B582 Gr.
N06985 (1)
46Fe 24Ni 21Cr 6Mo Cu N
B462 Gr.
N08367 (1)
A351 Gr.
CN3MN (1)
Plates
B688 Gr.
N08367 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
260
240
225
200
170
670
620
585
540
500
895
830
780
715
665
1,345
1,245
1,165
1,075
1,000
2,015
1,865
1,750
1,615
1,500
3,360
3,110
2,915
2,690
2,495
5,600
5,180
4,860
4,480
4,160
600
650
700
750
800
140
125
110
95
80
475
460
450
440
430
630
615
600
590
575
945
920
900
885
865
1,420
1,380
1,355
1,325
1,295
2,365
2,305
2,255
2,210
2,160
3,940
3,840
3,760
3,680
3,600
NOTE:
(1) Use solution annealed material only.
147
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.13 Pressure–Temperature Ratings for Group 3.13 Materials
Nominal Designation
Forgings
Castings
Plates
...
...
B582 Gr. N06975 (1)
B564 Gr. N08031 (2)
...
B625 Gr. N08031 (2)
49Ni 25Cr 18Fe 6Mo
Ni Fe Cr Mo Cu Low C
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
290
260
230
200
170
750
705
665
630
595
1,000
940
885
840
795
1,500
1,405
1,330
1,260
1,190
2,250
2,110
1,995
1,885
1,785
3,750
3,515
3,325
3,145
2,975
6,250
5,860
5,540
5,240
4,960
600
650
700
750
800
140
125
110
95
80
560
550
540
530
510
750
735
720
710
675
1,125
1,100
1,080
1,065
1,015
1,685
1,650
1,620
1,595
1,525
2,810
2,750
2,700
2,660
2,540
4,680
4,580
4,500
4,430
4,230
NOTES:
(1) Use solution annealed material only.
(2) Use annealed material only.
148
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.14 Pressure–Temperature Ratings for Group 3.14 Materials
Nominal Designation
Forgings
Castings
Plates
47Ni 22Cr 19Fe 6Mo
...
...
B582 Gr. N06007 (1)
40Ni 29Cr 15Fe 5Mo
B462 Gr. N06030 (1), (2)
...
B582 Gr. N06030 (1), (2)
58Ni 33Cr 8Mo
B462 Gr. N06035 (1), (2)
...
B575 Gr. N06035 (1), (2)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
275
250
230
200
720
650
600
565
960
865
800
750
1,440
1,295
1,200
1,130
2,160
1,945
1,800
1,690
3,600
3,240
3,000
2,820
6,000
5,400
5,000
4,700
500
600
650
700
170
140
125
110
540
520
510
505
715
690
680
675
1,075
1,035
1,020
1,015
1,615
1,555
1,535
1,520
2,690
2,590
2,555
2,530
4,480
4,320
4,260
4,220
750
800
850
900
95
80
65
50
500
500
485
450
670
665
650
600
1,005
1,000
975
900
1,505
1,500
1,460
1,350
2,510
2,495
2,435
2,245
4,180
4,160
4,060
3,745
950
1000
35
20
385
365
515
485
775
725
1,160
1,090
1,930
1,820
3,220
3,030
NOTES:
(1) Use solution annealed material only.
(2) Not to be used over 800°F.
149
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.15 Pressure–Temperature Ratings for Group 3.15 Materials
Nominal Designation
33Ni 42Fe 21Cr
Forgings
Castings
B564 Gr. N08810 (1)
Plates
...
B409 Gr. N08810 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
230
210
200
190
170
140
600
550
520
490
465
440
800
735
695
655
620
585
1,200
1,105
1,040
980
925
880
1,800
1,655
1,560
1,470
1,390
1,320
3,000
2,760
2,605
2,450
2,315
2,195
5,000
4,600
4,340
4,080
3,860
3,660
650
700
750
800
850
900
125
110
95
80
65
50
430
420
410
400
395
385
575
555
545
535
525
515
860
835
820
800
785
775
1,290
1,255
1,230
1,200
1,180
1,160
2,150
2,090
2,050
2,005
1,970
1,930
3,580
3,480
3,420
3,340
3,280
3,220
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
380
365
350
325
275
205
505
485
465
430
365
275
760
725
700
645
550
410
1,140
1,090
1,050
965
825
620
1,895
1,820
1,750
1,610
1,370
1,030
3,160
3,030
2,915
2,685
2,285
1,715
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
180
140
105
75
60
40
245
185
140
100
80
55
365
275
205
150
115
85
545
410
310
225
175
125
910
685
515
380
290
205
1,515
1,145
860
630
485
345
NOTE:
(1) Use solution annealed material only.
150
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.16 Pressure–Temperature Ratings for Group 3.16 Materials
Nominal Designation
Forgings
Castings
...
...
1
35Ni 19Cr 1 ⁄4Si
Plates
B536 Gr. N08330 (1)
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
275
245
225
200
170
140
720
635
595
555
530
505
960
850
790
740
705
670
1,440
1,270
1,185
1,115
1,055
1,010
2,160
1,910
1,780
1,670
1,585
1,510
3,600
3,180
2,965
2,785
2,640
2,520
6,000
5,300
4,940
4,640
4,400
4,200
650
700
750
800
850
900
125
110
95
80
65
50
495
480
475
465
455
445
660
645
630
620
605
590
990
965
945
925
905
890
1,485
1,445
1,420
1,390
1,360
1,330
2,470
2,410
2,365
2,315
2,270
2,220
4,120
4,020
3,940
3,860
3,780
3,700
950
1,000
1,050
1,100
1,150
1,200
35
20
...
...
...
...
385
365
345
265
205
160
515
485
455
355
275
215
775
725
685
535
410
320
1,160
1,090
1,030
800
615
485
1,930
1,820
1,715
1,335
1,030
805
3,220
3,030
2,855
2,230
1,715
1,345
1,250
1,300
1,350
1,400
1,450
1,500
...
...
...
...
...
...
130
105
80
60
50
40
175
140
110
80
70
50
260
215
165
125
105
75
390
320
245
185
155
115
650
530
410
310
255
190
1,085
885
685
515
430
315
NOTE:
(1) Use solution annealed material only.
151
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.17 Pressure–Temperature Ratings for Group 3.17 Materials
Nominal Designation
Forgings
29Ni 20.5Cr 3.5Cu 2.5Mo
...
Castings
Plates
A351 Gr. CN7M (1)
...
Working Pressures by Classes, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
230
200
180
160
150
140
600
520
465
420
390
360
800
690
620
565
520
480
1,200
1,035
930
845
780
720
1,800
1,555
1,395
1,265
1,165
1,080
3,000
2,590
2,330
2,110
1,945
1,800
5,000
4,320
3,880
3,520
3,240
3,000
NOTE:
(1) Use solution annealed material only.
152
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-2-3.19 Pressure–Temperature Ratings for Group 3.19 Materials
Nominal Designation
Forgings
Castings
Plates
57Ni 22Cr 14W 2Mo La
B564 Gr. N06230
...
B435 Gr. N06230
Working Pressures by Class, psig
Class
Temp., °F
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
600
290
260
230
200
170
140
750
750
730
705
665
605
1,000
1,000
970
940
885
805
1,500
1,500
1,455
1,410
1,330
1,210
2,250
2,250
2,185
2,115
1,995
1,815
3,750
3,750
3,640
3,530
3,325
3,025
6,250
6,250
6,070
5,880
5,540
5,040
650
700
750
800
850
900
125
110
95
80
65
50
590
570
530
510
485
450
785
755
710
675
650
600
1,175
1,135
1,065
1,015
975
900
1,765
1,705
1,595
1,525
1,460
1,350
2,940
2,840
2,660
2,540
2,435
2,245
4,905
4,730
4,430
4,230
4,060
3,745
950
1,000
1,050
1,100
1,150
1,200
35
20
20
20
20
20
385
365
360
325
275
205
515
485
480
430
365
275
775
725
720
645
550
410
1,160
1,090
1,080
965
825
620
1,930
1,820
1,800
1,610
1,370
1,030
3,220
3,030
3,000
2,685
2,285
1,715
1,250
1,300
1,350
1,400
1,450
1,500
20
20
20
20
20
20
180
140
105
75
60
40
245
185
140
100
80
55
365
275
205
150
115
85
545
410
310
225
175
125
910
685
515
380
290
205
1,515
1,145
860
630
485
345
153
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-3 Permissible Imperfections in Flange
Facing Finish for Raised Face and Large Male and
Female Flanges
Maximum Radial
Projection of
Imperfections That
Are No Deeper Than
the Bottom of the
Serrations, in.
Maximum Depth and
Radial Projection of
Imperfections That
Are Deeper Than the
Bottom of the
Serrations, in.
⁄2
⁄4
1
11⁄4
11⁄2
0.12
0.12
0.12
0.12
0.12
0.06
0.06
0.06
0.06
0.06
2
21⁄2
3
31⁄2
4
0.12
0.12
0.18
0.25
0.25
0.06
0.06
0.06
0.12
0.12
5
6
8
10
12
0.25
0.25
0.31
0.31
0.31
0.12
0.12
0.18
0.18
0.18
14
16
18
20
24
0.31
0.38
0.50
0.50
0.50
0.18
0.18
0.25
0.25
0.25
NPS
1
3
154
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-4
1
2
3
4
Dimensions of Facings (Other Than Ring Joints, All Pressure Rating Classes)
5
6
7
8
9
10
11
12
13
14
15
1
Height
Outside Diameter
1
Outside Diameter
Inside
Large
Diameter of
Female
Small
Large and
and Large Female,
Small
Small
Groove,
X
Groove,
Groove,
W
[Note (1)]
Y
Z
Raised
Face
[Notes
(2), (3)]
Minimum Outside Diameter
Large and Depth of
of Raised Portion
Small
Groove
[Notes (6), (7)]
Male and
or
Tongue
Female Small Female Large Female Nominal
[Notes
[Notes
and Groove, and Groove,
Pipe
(2), (4)]
(2), (5)]
K
L
Size
1
⁄2
⁄4
1
11⁄4
11⁄2
1.38
1.69
2.00
2.50
2.88
0.72
0.94
1.19
1.50
1.75
1.38
1.69
1.88
2.25
2.50
1.00
1.31
1.50
1.88
2.12
...
...
...
...
...
1.44
1.75
2.06
2.56
2.94
0.78
1.00
1.25
1.56
1.81
1.44
1.75
1.94
2.31
2.56
0.94
1.25
1.44
1.81
2.06
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1.75
2.06
2.25
2.62
2.88
1.81
2.12
2.44
2.94
3.31
⁄2
⁄4
1
11⁄4
11⁄2
2
21⁄2
3
31⁄2
4
3.62
4.12
5.00
5.50
6.19
2.25
2.69
3.31
3.81
4.31
3.25
3.75
4.62
5.12
5.69
2.88
3.38
4.25
4.75
5.19
...
...
...
...
...
3.69
4.19
5.06
5.56
6.25
2.31
2.75
3.38
3.88
4.38
3.31
3.81
4.69
5.19
5.75
2.81
3.31
4.19
4.69
5.12
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
3.62
4.12
5.00
5.50
6.19
4.06
4.56
5.44
5.94
6.62
2
21⁄2
3
31⁄2
4
5
6
8
10
12
7.31
8.50
10.62
12.75
15.00
5.38
6.38
8.38
10.50
12.50
6.81
8.00
10.00
12.00
14.25
6.31
7.50
9.38
11.25
13.50
...
...
...
...
...
7.38
8.56
10.69
12.81
15.06
5.44
6.44
8.44
10.56
12.56
6.88
8.06
10.06
12.06
14.31
6.25
7.44
9.31
11.19
13.44
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
7.31
8.50
10.62
12.75
15.00
7.75
8.94
11.06
13.19
15.44
5
6
8
10
12
14
16
18
20
24
16.25
18.50
21.00
23.00
27.25
13.75
15.75
17.75
19.75
23.75
15.50
17.62
20.12
22.00
26.25
14.75
16.75
19.25
21.00
25.25
...
...
...
...
...
16.31
18.56
21.06
23.06
27.31
13.81
15.81
17.81
19.81
23.81
15.56
17.69
20.19
22.06
26.31
14.69
16.69
19.19
20.94
25.19
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
16.25
18.50
21.00
23.00
27.25
16.69
18.94
21.44
23.44
27.69
14
16
18
20
24
3
3
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For facing requirements for flanges and flanged fittings, see paras. 6.3 and 6.4 and Fig. -6.
(c) For facing requirements for lapped Joints, see para. 6.4.3 and Fig. -6.
(d) For facing tolerances, see para. 7.3.
NOTES:
(1) For small male and female joints, care should be taken in the use of these dimensions to ensure that the inside diameter of fitting or pipe is small enough to permit sufficient bearing surface to prevent the crushing of the gasket. This applies particularly where the joint is made on the end of the pipe. The inside diameter of the fitting should match the inside diameter of
the pipe as specified by the Purchaser. Threaded companion flanges for small male and female joints are furnished with plain face and are threaded with American National Standard
Locknut Thread (NPSL).
(2) See para. 6.4.3 and Fig. -6 for thickness and outside diameters of laps.
(3) The height of the raised face is either 0.06 in. or 0.25 in. (see para. 6.4.1).
(4) The height of the large and small male and tongue is 0.25 in.
(5) The depth of the groove or female is 0.19 in.
(6) The raised portion of the full face may be furnished unless otherwise specified on order.
(7) Large male and female faces and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
ASME B16.5-2013
155
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Inside
Inside
Raised Face
Diameter of Diameter
Large Male
Small
Large and of Small
Nominal and Large
Male,
Small
Small
Male
Pipe
Tongue,
S
Tongue,
Tongue,
[Note
Size
R
[Note (1)]
T
U
(1)]
ASME B16.5-2013
Table II-5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes)
1
2
3
4
5
6
7
8
9
Nominal Pipe Size
Class 300
Class
400
[Note (2)]
...
...
...
...
1
1
⁄2
...
3
⁄4
...
...
...
11⁄4
...
11⁄2
...
10
11
12
Groove Dimensions
Class 600
Class
900
[Note (3)]
Class
1500
Class
2500
Groove
Number
Pitch
Diameter,
P
Depth,
E
[Note (1)]
Width,
F
Radius at
Bottom,
R
...
...
...
...
...
1
⁄2
...
3
⁄4
...
...
...
...
...
...
...
...
1
⁄2
...
3
⁄4
...
...
...
1
⁄2
...
...
R11
12
13
14
15
1.344
1.562
1.688
1.750
1.875
0.219
0.250
0.250
0.250
0.250
0.281
0.344
0.344
0.344
0.344
0.03
0.03
0.03
0.03
0.03
1
...
11⁄4
...
11⁄2
...
...
...
...
...
1
...
11⁄4
...
11⁄2
...
...
...
...
...
1
...
11⁄4
...
11⁄2
3
⁄4
...
1
...
...
16
17
18
19
20
2.000
2.250
2.375
2.562
2.688
0.250
0.250
0.250
0.250
0.250
0.344
0.344
0.344
0.344
0.344
0.03
0.03
0.03
0.03
0.03
...
2
...
...
21⁄2
...
...
2
...
...
...
...
...
...
...
...
...
2
...
...
...
...
...
...
...
...
...
...
2
...
11⁄4
...
11⁄2
...
...
21
22
23
24
25
2.844
3.250
3.250
3.750
4.000
0.312
0.250
0.312
0.312
0.250
0.469
0.344
0.469
0.469
0.344
0.03
0.03
0.03
0.03
0.03
...
...
...
3
...
21⁄2
...
...
...
[Note (4)]
...
...
...
...
...
21⁄2
...
...
...
[Note (4)]
...
...
...
...
...
...
21⁄2
...
...
...
2
...
21⁄2
...
...
26
27
28
29
30
4.000
4.250
4.375
4.500
4.625
0.312
0.312
0.375
0.250
0.312
0.469
0.469
0.531
0.344
0.469
0.03
0.03
0.06
0.03
0.03
...
...
31⁄2
...
...
3 [Note (4)]
...
...
31⁄2
...
...
...
...
...
...
3 [Note (4)]
...
...
31⁄2
...
3
...
...
...
...
...
...
...
...
3
...
3
...
...
...
31
32
33
34
35
4.875
5.000
5.188
5.188
5.375
0.312
0.375
0.250
0.312
0.312
0.469
0.531
0.344
0.469
0.469
0.03
0.06
0.03
0.03
0.03
4
...
...
...
5
...
4
...
...
...
...
4
...
...
...
...
4
...
...
...
...
4
...
...
...
...
...
...
4
...
...
...
4
...
...
36
37
38
39
40
5.875
5.875
6.188
6.375
6.750
0.250
0.312
0.438
0.312
0.250
0.344
0.469
0.656
0.469
0.344
0.03
0.03
0.06
0.03
0.03
...
...
6
...
...
5
...
...
...
6
5
...
...
...
6
5
...
...
...
6
5
...
...
...
6
...
...
...
5
...
...
5
...
...
...
41
42
43
44
45
7.125
7.500
7.625
7.625
8.312
0.312
0.500
0.250
0.312
0.312
0.469
0.781
0.344
0.469
0.469
0.03
0.06
0.03
0.03
0.03
...
...
8
...
...
...
...
...
8
...
...
...
...
8
...
...
...
...
8
...
...
...
...
8
...
6
...
...
...
8
...
6
...
...
...
46
47
48
49
50
8.312
9.000
9.750
10.625
10.625
0.375
0.500
0.250
0.312
0.438
0.531
0.781
0.344
0.469
0.656
0.06
0.06
0.03
0.03
0.06
Class
150
156
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes) (Cont’d)
13
14
15
16
17
18
19
Diameter of Raised Portion, K
20
21
22
23
24
Approximate Distance Between Flanges
Class
150
Class
300
400
600
Class
900
Class
1500
Class
2500
Class
150
Class
300
Class
400
Class
600
Class
900
Class
1500
Class
2500
...
...
...
...
2.50
2.00
...
2.50
...
...
...
...
...
...
...
...
2.38
...
2.62
...
...
...
2.56
...
...
...
...
...
...
0.16
0.12
...
0.16
...
...
...
...
...
...
...
0.12
...
0.16
...
...
...
...
...
...
...
...
0.16
...
0.16
...
...
...
0.16
...
...
...
2.88
...
3.25
...
2.75
...
3.12
...
3.56
...
...
...
...
...
2.81
...
3.19
...
3.62
2.88
...
3.25
...
...
...
0.16
...
0.16
...
0.16
...
0.16
...
0.16
...
...
...
...
...
0.16
...
0.16
...
0.16
...
...
...
...
...
0.16
...
0.16
...
0.16
0.16
...
0.16
...
...
...
4.00
...
...
4.75
...
...
4.25
...
...
...
...
...
...
...
...
...
...
4.88
...
4.00
...
4.50
...
...
...
0.16
...
...
0.16
...
...
0.22
...
...
...
...
...
...
...
...
...
0.19
...
...
...
...
...
...
...
...
...
...
0.12
...
0.12
...
0.12
...
...
...
...
...
5.25
...
5.00
...
...
...
...
...
...
...
...
...
...
5.38
...
...
...
5.25
...
5.88
...
...
...
...
...
0.16
...
0.22
...
...
...
...
...
...
...
...
...
0.19
...
...
...
...
...
...
...
...
...
...
0.12
...
...
...
0.12
...
0.12
...
...
...
...
6.06
...
...
5.75
...
...
6.25
...
6.12
...
...
...
...
...
...
...
...
6.62
...
6.62
...
...
...
...
...
0.16
...
...
0.22
...
...
0.22
...
...
...
...
...
...
0.19
...
...
0.19
...
0.16
...
...
...
...
...
...
...
...
0.12
...
0.12
...
...
...
6.75
...
...
...
7.62
...
6.88
...
...
...
...
7.12
...
...
...
...
...
...
7.62
...
...
...
8.00
...
...
0.16
...
...
...
0.16
...
0.22
...
...
...
...
0.22
...
...
...
...
0.19
...
...
...
...
0.16
...
...
...
...
...
...
0.12
...
...
...
0.16
...
...
...
...
8.62
...
...
8.25
...
...
...
9.50
8.50
...
...
...
9.50
...
...
...
9.00
...
...
9.50
...
...
...
...
...
0.16
...
...
0.22
...
...
...
0.22
0.22
...
...
...
0.22
0.19
...
...
...
0.19
0.16
...
...
...
0.16
...
...
...
0.12
...
...
0.16
...
...
...
...
...
10.75
...
...
...
...
...
11.88
...
...
...
...
12.12
...
9.75
...
...
...
12.50
...
11.00
...
...
...
...
...
0.16
...
...
...
...
...
0.22
...
...
...
...
0.22
...
...
...
...
0.19
...
...
...
...
0.16
...
0.12
...
...
...
0.16
...
0.16
157
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
...
...
ASME B16.5-2013
Table II-5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes) (Cont’d)
1
2
3
4
5
6
7
8
9
Nominal Pipe Size
Class 300
Class
400
[Note (2)]
...
10
...
...
...
...
...
10
...
...
12
...
...
14
...
11
12
Groove Dimensions
Class 600
Class
900
[Note (3)]
Class
1500
Class
2500
Groove
Number
Pitch
Diameter,
P
...
...
10
...
...
...
...
10
...
...
...
...
10
...
...
...
...
...
10
...
8
...
...
...
10
51
52
53
54
55
11.000
12.000
12.750
12.750
13.500
...
12
...
...
...
...
12
...
...
...
...
12
...
...
...
...
12
...
...
...
...
...
12
...
...
...
...
...
...
12
56
57
58
59
60
...
...
...
16
...
14
...
...
...
16
14
...
...
...
16
14
...
...
...
16
...
14
...
...
...
...
...
14
...
...
...
...
...
...
...
...
...
18
...
...
...
...
...
18
...
...
...
...
18
...
...
...
...
18
...
16
...
...
...
18
...
16
...
...
...
...
20
...
...
...
...
...
20
...
...
...
...
20
...
...
...
...
20
...
...
...
...
...
20
...
24
...
...
...
...
24
...
...
...
24
...
...
...
24
...
...
...
...
24
...
Class
150
10
Depth,
E
[Note (1)]
Width,
F
Radius at
Bottom,
R
0.562
0.250
0.312
0.438
0.688
0.906
0.344
0.469
0.656
1.188
0.06
0.03
0.03
0.06
0.09
15.000
15.000
15.000
15.625
16.000
0.250
0.312
0.562
0.250
0.688
0.344
0.469
0.906
0.344
1.312
0.03
0.03
0.06
0.03
0.09
61
62
63
64
65
16.500
16.500
16.500
17.875
18.500
0.312
0.438
0.625
0.250
0.312
0.469
0.656
1.062
0.344
0.469
0.03
0.06
0.09
0.03
0.03
...
...
...
...
...
66
67
68
69
70
18.500
18.500
20.375
21.000
21.000
0.438
0.688
0.250
0.312
0.500
0.656
1.188
0.344
0.469
0.781
0.06
0.09
0.03
0.03
0.06
18
...
...
...
20
...
...
...
...
...
71
72
73
74
75
21.000
22.000
23.000
23.000
23.000
0.688
0.250
0.375
0.500
0.688
1.188
0.344
0.531
0.781
1.312
0.09
0.03
0.06
0.06
0.09
...
...
...
24
...
...
...
...
76
77
78
79
26.500
27.250
27.250
27.250
0.250
0.438
0.625
0.812
0.344
0.656
1.062
1.438
0.03
0.06
0.09
0.09
158
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-5 Dimensions of Ring-Joint Facings (All Pressure Rating Classes) (Cont’d)
13
14
15
16
17
18
19
23
24
Class
150
Class
300
400
600
Class
900
Class
1500
Class
2500
Class
150
Class
300
Class
400
Class
600
Class
900
Class
1500
Class
2500
...
13.00
...
...
...
...
...
14.00
...
...
...
...
14.25
...
...
...
...
...
14.62
...
13.38
...
...
...
16.75
...
0.16
...
...
...
...
...
0.22
...
...
...
...
0.22
...
...
...
...
0.19
...
...
...
...
0.16
...
...
...
...
...
0.16
...
0.19
...
...
...
0.25
16.00
...
...
16.75
...
...
16.25
...
...
...
...
16.50
...
...
...
...
...
17.25
...
...
...
...
...
...
19.50
0.16
...
...
0.12
...
...
0.22
...
...
...
...
0.22
...
...
...
...
0.19
...
...
...
...
0.16
...
...
...
...
...
0.19
...
...
...
...
...
...
0.31
...
...
...
19.00
...
18.00
...
...
...
20.00
...
18.38
...
...
...
...
...
19.25
...
...
...
...
...
...
...
...
...
...
0.12
...
0.22
...
...
...
0.22
0.22
...
...
...
0.22
0.19
...
...
...
0.19
...
0.16
...
...
...
...
...
0.22
...
...
...
...
...
...
...
...
...
21.50
...
...
...
...
...
22.62
...
20.62
...
...
...
23.38
...
21.50
...
...
...
...
...
...
...
...
...
...
0.12
...
...
...
...
...
0.22
...
...
...
...
0.22
...
...
...
...
0.19
...
0.16
...
...
...
0.19
...
0.31
...
...
...
...
...
...
...
...
...
23.50
...
...
...
...
...
25.00
...
...
...
...
...
25.50
...
24.12
...
...
...
26.50
...
...
...
...
...
...
0.12
...
...
...
...
...
0.22
...
...
...
...
0.22
...
...
...
...
0.19
...
...
...
...
...
0.19
...
0.31
...
...
...
0.38
...
...
...
...
...
28.00
...
...
...
...
29.50
...
...
...
...
30.38
...
...
...
...
31.25
...
...
...
...
0.12
...
...
...
...
0.25
...
...
...
0.25
...
...
...
0.22
...
...
...
...
0.22
...
...
...
...
0.44
...
...
...
...
Diameter of Raised Portion, K
20
21
22
(13)
Approximate Distance Between Flanges
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For facing requirements for flanges and flanged fittings, see para. 6.4.1 and Fig. II 6.
(c) For facing requirements for lapped joints, see para. 6.4.3 and Fig. II 6.
(d) See para 4.2.7 for marking requirements.
NOTES:
(1) The height of the raised portion is equal to the depth of groove dimension E, but is not subjected to the tolerances for E. Former full
face contour may be used.
(2) Use Class 600 in sizes NPS 1⁄2 to NPS 31⁄2 for Class 400.
(3) Use Class 1500 in sizes NPS 1⁄2 to NPS 21⁄2 for Class 900.
(4) For ring joints with lapped flanges in Classes 300 and 600, ring and groove number R30 are used instead of R31.
TOLERANCES:
E
(depth) +0.016, 0.00 in.
F
(width) ±0.008
P
(pitch diameter) ±0.005
R
(radius at bottom)
R ≤ 0.06 +0.03, 0.00 in.
R > 0.06 ± 0.03
23 deg (angle) ± 1⁄2 deg
159
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-6 Reducing Threaded and Slip-On Flanges for Classes 150 Through 2500 Pipe Flanges
(13)
Note (1)
Note (2)
Note (1)
Note (2)
Note (3)
Note (3)
Threaded
Blind Flange
X [Note (1)]
Slip-On Welding
1
2
3
4
5
6
Nominal
Pipe Size
[Note (4)]
Smallest Size of Reducing
Outlet Requiring Hub Flanges
[Note (1)]
Nominal
Pipe Size
[Note (4)]
Smallest Size of Reducing
Outlet Requiring Hub Flanges
[Note (1)]
Nominal
Pipe Size
[Note (4)]
Smallest Size of Reducing
Outlet Requiring Hub Flanges
[Note (1)]
31⁄2
4
5
6
8
10
11⁄2
11⁄2
11⁄2
21⁄2
3
31⁄2
12
14
16
18
20
24
31⁄2
31⁄2
4
4
4
4
1
11⁄4
11⁄2
2
21⁄2
3
1
⁄2
⁄2
1
⁄2
1
11⁄4
11⁄4
1
NOTES:
(1) The hub dimensions shall be at least as large as those of the standard flanges of the size to which the reduction is being made,
except flanges reducing to a size smaller than those of Columns 2, 4, and 6 may be made from blind flanges (see Example B).
(2) Class 150 flanges do not have a counterbore. Class 300 and higher pressure flanges will have a depth of counterbore of 0.25 in. for
NPS 2 and smaller tapping and 0.38 in. for NPS 21⁄2 and larger. The diameter Q of counterbore is the same as that given in the tables
of the threaded flanges for the corresponding tapping.
(3) The minimum length of effective threads shall be at least equal to dimension T of the corresponding pressure class threaded flange as
shown in the tables but does not necessarily extend for the face of the flange. For thread of threaded flanges, see para. 6.9.
(4) For the method of designating reducing threaded and reducing slip on flanges, see para. 3.3 and the example below.
EXAMPLES:
(1) The size designation is NPS 6 ⴛ 21⁄2 Class 300 reducing threaded flange. This flange has the following dimensions:
NPS 21⁄2 p taper pipe thread tapping (ASME B1.20.1)
12.5 in. p diameter of regular NPS 6 Class 300 threaded flange
1.44 in. p thickness of regular NPS 6 Class 300 threaded flange
7.0 in. p diameter of hub for regular NPS 5 Class 300 threaded flange. Hub diameter may be one size smaller to reduce machin
ing. In this example, a hub diameter of NPS 21⁄2 would be the smallest acceptable.
0.62 in. p height of hub for regular NPS 5 Class 300 threaded flange
Other dimensions the same as for regular NPS 6 Class 300 threaded flange, Table II 12.
(2) The size designation is NPS 6 x 2 Class 300 reducing threaded flange. Use regular NPS 6 Class 300 blind flange tapped with NPS 2
taper pipe thread (ASME B1.20.1).
160
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-7 Templates for Drilling Class 150 Pipe Flanges and Flanged Fittings
L
O
W
Machine Bolt With Nuts
L
Flange
Point height [Note (1)]
Stud Bolt With Nuts
1
2
3
4
5
6
7
8
9
Length of Bolts,
L
[Note (4)]
Nominal
Pipe
Size,
NPS
Drilling [Notes (2), (3)]
Stud Bolts
[Note (1)]
Outside
Diameter
of Flange,
O
Diameter of
Bolt Circle,
W
⁄2
⁄4
1
11⁄4
11⁄2
3.50
3.88
4.25
4.62
5.00
2.38
2.75
3.12
3.50
3.88
5
⁄8
⁄8
5
⁄8
5
⁄8
5
⁄8
4
4
4
4
4
1
2
21⁄2
3
31⁄2
4
6.00
7.00
7.50
8.50
9.00
4.75
5.50
6.00
7.00
7.50
3
5
6
8
10
12
10.00
11.00
13.50
16.00
19.00
8.50
9.50
11.75
14.25
17.00
7
14
16
18
20
24
21.00
23.50
25.00
27.50
32.00
18.75
21.25
22.75
25.00
29.50
1
3
Diameter of
Bolt Holes
Raised Face
0.06 in.
Ring
Joint
Raised Face
0.06 in.
⁄2
⁄2
1
⁄2
1
⁄2
1
⁄2
2.25
2.50
2.50
2.75
2.75
...
...
3.00
3.25
3.25
2.00
2.00
2.25
2.25
2.50
4
4
4
8
8
5
⁄8
⁄8
5
⁄8
5
⁄8
5
⁄8
3.25
3.50
3.50
3.50
3.50
3.75
4.00
4.00
4.00
4.00
2.75
3.00
3.00
3.00
3.00
⁄8
⁄8
7
⁄8
1
1
8
8
8
12
12
3
⁄4
⁄4
3
⁄4
7
⁄8
7
⁄8
3.75
4.00
4.25
4.50
4.75
4.25
4.50
4.75
5.00
5.25
3.25
3.25
3.50
4.00
4.00
11⁄8
11⁄8
11⁄4
11⁄4
13⁄8
12
16
16
20
20
1
1
11⁄8
11⁄8
11⁄4
5.25
5.25
5.75
6.25
6.75
5.75
5.75
6.25
6.75
7.25
4.50
4.50
5.00
5.50
6.00
5
⁄4
⁄4
3
⁄4
3
⁄4
3
⁄4
3
7
Number
of Bolts
Diameter
of Bolts
Machine
Bolts
1
5
3
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For other dimensions, see Tables II 8 and II 9.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
161
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
Table II-8
Dimensions of Class 150 Flanges
X [Note (1)]
X [Note (1)]
B
tf
T
Y
O
Threaded
Slip-On Welding
X [Note (1)]
B
X [Note (1)]
B
Col. 11
r
D
tf
Y
tf
Y
O
B
Col. 13
Lapped
X
Ah
O
B
ASME B16.5-2013
Socket Welding (NPS 1/2 to 3 Only)
162
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
O
Y
tf
Y
tf
tf
O
Blind
Welding Neck
1
Nominal
Pipe Size
1
⁄2
⁄4
1
11⁄4
11⁄2
3
2
Outside
Diameter
of Flange,
O
3.50
3.88
4.25
4.62
5.00
3
4
5
Minimum
Thickness of
Flange,
Minimum Diameter
tf
Thickness of Hub,
[Notes (2)–(4)] Lap Joint
X
0.38
0.44
0.50
0.56
0.62
0.44
0.50
0.56
0.62
0.69
1.19
1.50
1.94
2.31
2.56
6
7
8
9
10
11
Length Through Hub
Diameter
Beginning
of Chamfer
Welding
Neck,
Ah
[Note (5)]
Threaded
Slip-On
Socket
Welding,
Y
0.84
1.05
1.32
1.66
1.90
0.56
0.56
0.62
0.75
0.81
Welding
Lapped,
Neck,
Y
Y
0.62
0.62
0.69
0.81
0.88
1.81
2.00
2.12
2.19
2.38
12
13
14
15
Welding
Neck/
Socket
Welding,
B
[Note (7)]
Corner Bore
Radius of
Lapped Flange
and Pipe,
r
Depth
of
Socket,
D
0.62
0.82
1.05
1.38
1.61
0.12
0.12
0.12
0.19
0.25
0.38
0.44
0.50
0.56
0.62
Bore
Minimum
Thread
Length
Threaded,
T
[Note (6)]
0.62
0.62
0.69
0.81
0.88
Minimum
Slip-On
Socket
Minimum
Welding, Lapped,
B
B
0.88
1.09
1.36
1.70
1.95
0.90
1.11
1.38
1.72
1.97
1
2
3
4
5
Minimum
Thickness of
Flange,
Minimum Diameter
Thickness of Hub,
tf
[Notes (2)–(4)] Lap Joint
X
Dimensions of Class 150 Flanges (Cont’d)
6
7
8
9
10
11
Length Through Hub
Diameter
Beginning
of Chamfer
Welding
Neck,
Ah
[Note (5)]
Threaded
Slip-On
Socket
Welding,
Y
12
13
14
15
Welding
Neck/
Socket
Welding,
B
[Note (7)]
Corner Bore
Radius of
Lapped Flange
and Pipe,
r
Depth
of
Socket,
D
Bore
Minimum
Thread
Length
Threaded,
T
[Note (6)]
Minimum
Slip-On
Socket
Minimum
Welding, Lapped,
B
B
Nominal
Pipe Size
Outside
Diameter
of Flange,
O
2
21⁄2
3
31⁄2
4
6.00
7.00
7.50
8.50
9.00
0.69
0.81
0.88
0.88
0.88
0.75
0.88
0.94
0.94
0.94
3.06
3.56
4.25
4.81
5.31
2.38
2.88
3.50
4.00
4.50
0.94
1.06
1.12
1.19
1.25
1.00
1.12
1.19
1.25
1.31
2.44
2.69
2.69
2.75
2.94
1.00
1.12
1.19
1.25
1.31
2.44
2.94
3.57
4.07
4.57
2.46
2.97
3.60
4.10
4.60
2.07
2.47
3.07
3.55
4.03
0.31
0.31
0.38
0.38
0.44
0.69
0.75
0.81
...
...
5
6
8
10
12
10.00
11.00
13.50
16.00
19.00
0.88
0.94
1.06
1.12
1.19
0.94
1.00
1.12
1.19
1.25
6.44
7.56
9.69
12.00
14.38
5.56
6.63
8.63
10.75
12.75
1.38
1.50
1.69
1.88
2.12
1.44
1.56
1.75
1.94
2.19
3.44
3.44
3.94
3.94
4.44
1.44
1.56
1.75
1.94
2.19
5.66
6.72
8.72
10.88
12.88
5.69
6.75
8.75
10.92
12.92
5.05
6.07
7.98
10.02
12.00
0.44
0.50
0.50
0.50
0.50
...
...
...
...
...
14
16
18
20
24
21.00
23.50
25.00
27.50
32.00
1.31
1.38
1.50
1.62
1.81
1.38
1.44
1.56
1.69
1.88
15.75
18.00
19.88
22.00
26.12
14.00
16.00
18.00
20.00
24.00
2.19
2.44
2.62
2.81
3.19
3.12
3.44
3.81
4.06
4.38
4.94
4.94
5.44
5.62
5.94
2.25
2.50
2.69
2.88
3.25
14.14
16.16
18.18
20.20
24.25
14.18
16.19
18.20
20.25
24.25
0.50
0.50
0.50
0.50
0.50
...
...
...
...
...
Welding
Lapped,
Neck,
Y
Y
Note
Note
Note
Note
Note
(8)
(8)
(8)
(8)
(8)
ASME B16.5-2013
163
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-8
Dimensions of Class 150 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -7.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table -6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges.
(2) The minimum thickness of these loose flanges, in sizes NPS 31⁄2 and smaller, is slightly greater than the thickness of flanges on fittings, Table -9, which are reinforced by being cast
integral with the body of the fitting.
(3) When these flanges are required with flat face, the flat face may be either the full tf dimension thickness plus 0.06 in. or the tf dimension thickness without the raised face height.
See para. 6.3.2 for additional restrictions.
(4) The flange dimensions illustrated are for regularly furnished 0.06-in. raised face (except lapped); for requirements of other facings, see Fig. -6.
(5) For welding end bevel, see para. 6.7.
(6) For thread of threaded flanges, see para. 6.9.
(7) Dimensions in Column 13 correspond to the inside diameters of pipe as given in ASME B36.10M for standard wall pipe. The thickness of standard wall is the same as Schedule 40
in sizes NPS 10 and smaller. Tolerances in para. 7.5.2 apply. These bore sizes are furnished unless otherwise specked by the Purchaser.
(8) To be specified by the Purchaser.
ASME B16.5-2013
164
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-8
(13)
Table II-9
Dimensions of Class 150 Flanged Fittings
BB
JJ
AA
HH
AA
HH
CC K
K
CC
KK
Long Radius
Elbow
45-deg Elbow
AA
HH
AA
HH
AA
HH
Tee
GG
NN
EE
LL
AA
HH
Cross
A
HH A
A
HH A
Elbow
GG
NN
EE L
L
FF
MM
FF
MM
1
2
45-deg Lateral
3
4
Eccentric
Reducer
Reducer
5
6
7
True “Y”
8
9
10
11
12
Short
Center-toContact
Surface of
Raised
Face
Lateral and
True “Y,”
FF
Contact
Surface-toContact
Surface of
Raised
Face
Reducer,
GG
[Note (5)]
Center-to-End
Elbow Tee,
Cross, and
True “Y,”
HH
[Note (6)]
0.06-in. Raised Face (Flange Edge)
[Note (4)]
Outside
Diameter
of Flange,
O
Minimum
Thickness of
Flange,
tf
[Notes (1)–(3)]
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter
of Fitting,
d
⁄2
⁄4
1
11⁄4
11⁄2
3.50
3.88
4.25
4.62
5.00
0.31
0.34
0.38
0.44
0.50
0.11
0.12
0.16
0.19
0.19
0.50
0.75
1.00
1.25
1.50
...
...
3.50
3.75
4.00
...
...
5.00
5.50
6.00
...
...
1.75
2.00
2.25
...
...
5.75
6.25
7.00
...
...
1.75
1.75
2.00
...
...
4.50
4.50
4.50
...
...
3.75
4.00
4.25
2
21⁄2
3
31⁄2
4
6.00
7.00
7.50
8.50
9.00
0.56
0.62
0.69
0.75
0.88
0.22
0.22
0.22
0.25
0.25
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
6.50
7.00
7.75
8.50
9.00
2.50
3.00
3.00
3.50
4.00
8.00
9.50
10.00
11.50
12.00
2.50
2.50
3.00
3.00
3.00
5.00
5.50
6.00
6.50
7.00
4.75
5.25
5.75
6.25
6.75
Nominal
Pipe
Size,
NPS
1
3
Center-toContact
Surface of
Raised Face
Long
Radius
Elbow,
BB
Center-toContact
Surface of
Raised Face
45-deg
Elbow,
CC
Long
Center-toContact
Surface of
Raised
Face
Lateral,
EE
Ring Joint
[Note (4)]
Center-toContact
Surface of
Raised Face
Elbow, Tee,
Cross, and
True “Y,”
AA
ASME B16.5-2013
90 deg
165
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
BB
JJ
AA
HH
AA
HH
AA
HH
1
2
3
4
Dimensions of Class 150 Flanged Fittings (Cont’d)
5
6
7
8
9
10
11
12
Contact
Surface-toContact
Surface of
Raised Face
Reducer,
GG
[Note (5)]
Ring Joint
[Note (4)]
Center-to-End
Elbow Tee,
Cross, and
True “Y,”
HH
[Note (6)]
0.06-in. Raised Face (Flange Edge)
[Note (4)]
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter of
Fitting,
d
Center-toContact
Surface of
Raised Face
Elbow, Tee,
Cross, and
True “Y,”
AA
Center-toContact
Surface of
Raised Face
Long Radius
Elbow,
BB
Center-toContact
Surface of
Raised Face
45-deg
Elbow,
CC
Long
Center-toContact
Surface of
Raised Face
Lateral,
EE
Short
Center-toContact
Surface of
Raised Face
Lateral and
True “Y,”
FF
Nominal
Pipe
Size,
NPS
Outside
Diameter
of Flange,
O
Minimum
Thickness of
Flange,
tf
[Notes (1)–(3)]
5
6
8
10
12
10.00
11.00
13.50
16.00
19.00
0.88
0.94
1.06
1.12
1.19
0.28
0.28
0.31
0.34
0.38
5.00
6.00
8.00
10.00
12.00
7.50
8.00
9.00
11.00
12.00
10.25
11.50
14.00
16.50
19.00
4.50
5.00
5.50
6.50
7.50
13.50
14.50
17.50
20.50
24.50
3.50
3.50
4.50
5.00
6.50
8.00
9.00
11.00
12.00
14.00
7.75
8.25
9.25
11.25
12.25
14
16
18
20
24
21.00
23.50
25.00
27.50
32.00
1.31
1.38
1.50
1.62
1.81
0.41
0.44
0.47
0.50
0.57
13.25
15.25
17.25
19.25
23.25
14.00
15.00
16.50
18.00
22.00
21.50
24.00
26.50
29.00
34.00
7.50
8.00
8.50
9.50
11.00
27.00
30.00
32.00
35.00
40.50
6.00
6.50
7.00
8.00
9.00
16.00
18.00
19.00
20.00
24.00
14.25
15.25
16.75
18.25
22.25
ASME B16.5-2013
166
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-9
(13)
Table II-9
O
Dimensions of Class 150 Flanged Fittings (Cont’d)
d
tf
t
S
Flanged Fitting
R
T
S
Base Elbow
14
15
16
17
R
U
S
Base Tee
18
19
Center-toBase,
R
[Notes (7)–(9)]
Diameter of
Round Base
or Width of
Square
Base,
S
[Note (7)]
Thickness of
Base,
T
[Notes (7)–(10)]
Thickness
of Ribs,
U
[Note (7)]
Bolt Circle
or Bolt
Spacing,
W
Ring Joint [Note (4)]
20
21
22
Center-to-End
Long Radius
Elbow,
JJ
[Note (6)]
Center-to-End
45-deg
Elbow,
KK
[Note (6)]
Long Centerto-End
Lateral,
LL
[Note (6)]
Short Centerto-End
Lateral and
True “Y,”
MM
[Note (6)]
...
...
5.25
5.75
6.25
...
...
2.00
2.25
2.50
...
...
6.00
6.50
7.25
...
...
2.00
2.00
2.25
Notes
Notes
Notes
Notes
Notes
(5),
(5),
(5),
(5),
(5),
(6)
(6)
(6)
(6)
(6)
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
6.75
7.25
8.00
8.75
9.25
2.75
3.25
3.25
3.75
4.25
8.25
9.75
10.25
11.75
12.25
2.75
2.75
3.25
3.25
3.25
Notes
Notes
Notes
Notes
Notes
(5),
(5),
(5),
(5),
(5),
(6)
(6)
(6)
(6)
(6)
4.12
4.50
4.88
5.25
5.50
4.62
4.62
5.00
5.00
6.00
0.50
0.50
0.56
0.56
0.62
0.50
0.50
0.56
0.56
0.62
3.50
3.50
3.88
3.88
4.75
End-to-End
Reducer,
NN
23
1
Base Drilling [Note (11)]
Diameter of
Drilled
Holes
Nominal
Pipe
Size,
NPS
1
...
...
...
⁄2
⁄4
1
11⁄4
11⁄2
5
2
21⁄2
3
31⁄2
4
⁄8
⁄8
5
⁄8
5
⁄8
3
⁄4
5
3
ASME B16.5-2013
T
13
S
Square Base
Four bolt holes
Round Base
U
167
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
S
Table II-9
13
14
15
16
Dimensions of Class 150 Flanged Fittings (Cont’d)
17
18
19
Center-toBase,
R
[Notes (7)–(9)]
Diameter of
Round Base
or Width of
Square
Base,
S
[Note (7)]
Thickness of
Base,
T
[Notes (7)–(10)]
Thickness
of Ribs,
U
[Note (7)]
Bolt Circle
or Bolt
Spacing,
W
Ring Joint [Note (4)]
20
21
22
23
1
Center-to-End
45-deg
Elbow,
KK
[Note (6)]
Long Centerto-End
Lateral,
LL
[Note (6)]
10.50
11.75
14.25
16.75
19.25
4.75
5.25
5.75
6.75
7.75
13.75
14.75
17.75
20.75
24.75
3.75
3.75
4.75
5.25
5.75
Notes
Notes
Notes
Notes
Notes
(5),
(5),
(5),
(5),
(5),
(6)
(6)
(6)
(6)
(6)
6.25
7.00
8.38
9.75
11.25
7.00
7.00
9.00
9.00
11.00
0.69
0.69
0.94
0.94
1.00
0.65
0.65
0.94
0.94
1.00
5.50
5.50
7.50
7.50
9.50
3
⁄4
⁄4
3
⁄4
3
⁄4
7
⁄8
5
6
8
10
12
21.75
24.25
26.75
29.25
34.25
7.75
8.25
8.75
9.75
11.25
27.25
30.25
32.25
35.25
40.75
6.25
6.75
7.25
8.25
9.25
Notes
Notes
Notes
Notes
Notes
(5),
(5),
(5),
(5),
(5),
(6)
(6)
(6)
(6)
(6)
12.50
13.75
15.00
16.00
18.50
11.00
11.00
13.50
13.50
13.50
1.00
1.00
1.12
1.12
1.12
1.00
1.00
1.12
1.12
1.12
9.50
9.50
11.75
11.75
11.75
7
14
16
18
20
24
End-to-End
Reducer,
NN
Base Drilling [Note (11)]
Diameter of
Drilled
Holes
3
⁄8
⁄8
7
⁄8
7
⁄8
7
⁄8
7
Nominal
Pipe
Size,
NPS
GENERAL NOTE:
(a) Dimensions of Table -9 are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -7.
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.
(i) For drains, see para. 6.12.
NOTES:
(1) The thickness of flange minimum dimensions for loose flanges, Table -9, sizes NPS 31⁄2 and smaller, are slightly heavier than for flanges on these fittings, which are reinforced by
being cast integral with the body of the fitting.
(2) These fittings may be supplied with a flat face flange. The flat face may be either the full tf dimension thickness plus 0.06 in. or the tf dimension thickness without the raised face
height. See para. 6.3.2 for additional restrictions.
(3) The thickness of the flange dimension illustrated is for regularly furnished 0.06-in. raised face (except lapped); for thickness requirements of other facings, see Fig. -6.
(4) For center-to-contact surface and center-to-end dimensions of reducing fittings, see para. 6.2.3.
(5) For contact surface-to-contact surface and end-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(6) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use center-tocontact surface or contact surface-to-contact surface dimensions of 0.06-in. raised face (flange edge) for the largest opening, and add the proper height to provide for ring joint
groove applying to each flange. See Table -5 for ring joint facing dimensions.
ASME B16.5-2013
168
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Center-to-End
Long Radius
Elbow,
JJ
[Note (6)]
Short Centerto-End
Lateral and
True “Y,”
MM
[Note (6)]
(7)
(8)
The base dimensions apply to all straight and reducing sizes.
For reducing fittings, the size, and center-to-face dimension of base are determined by the size of the largest opening of fittings. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(9) Bases shall be plain faced, unless otherwise specified, and the center-to-base dimension R shall be the finished dimension.
(10) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(11) The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
ASME B16.5-2013
Dimensions of Class 150 Flanged Fittings (Cont’d)
NOTES (CONT’D):
169
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-9
ASME B16.5-2013
Table II-10 Templates for Drilling Class 300 Flanges
L
O
W
Machine Bolt With Nuts
L
Flange
Point height [Note (1)]
Stud Bolt With Nuts
1
2
3
4
5
6
Drilling [Notes (2), (3)]
Diameter of
Bolt Circle,
W
⁄2
⁄4
1
11⁄4
11⁄2
3.75
4.62
4.88
5.25
6.12
2.62
3.25
3.50
3.88
4.50
5
⁄8
⁄4
3
⁄4
3
⁄4
7
⁄8
4
4
4
4
4
1
2
21⁄2
3
31⁄2
4
6.50
7.50
8.25
9.00
10.00
5.00
5.88
6.62
7.25
7.88
3
5
6
8
10
12
11.00
12.50
15.00
17.50
20.50
9.25
10.62
13.00
15.25
17.75
7
14
16
18
20
24
23.00
25.50
28.00
30.50
36.00
20.25
22.50
24.75
27.00
32.00
1
3
8
Stud Bolts [Note (1)]
Diameter of
Bolt Holes
Ring Joint
Raised Face
0.06 in.
⁄2
⁄8
5
⁄8
5
⁄8
3
⁄4
2.50
3.00
3.00
3.25
3.50
3.00
3.50
3.50
3.75
4.00
2.25
2.50
2.50
2.75
3.00
8
8
8
8
8
5
⁄8
⁄4
3
⁄4
3
⁄4
3
⁄4
3.50
4.00
4.25
4.25
4.50
4.00
4.50
4.75
5.00
5.00
3.00
3.25
3.50
3.75
3.75
⁄8
⁄8
1
11⁄8
11⁄4
8
12
12
16
16
3
⁄4
⁄4
7
⁄8
1
11⁄8
4.75
4.75
5.50
6.25
6.75
5.25
5.50
6.00
6.75
7.25
4.25
4.25
4.75
5.50
5.75
11⁄4
13⁄8
13⁄8
13⁄8
15⁄8
20
20
24
24
24
11⁄8
11⁄4
11⁄4
11⁄4
11⁄2
7.00
7.50
7.75
8.00
9.00
7.50
8.00
8.25
8.75
10.00
6.25
6.50
6.75
7.25
8.00
⁄4
⁄8
7
⁄8
7
⁄8
7
⁄8
7
7
Diameter of
Bolts
Machine Bolts
Raised Face
0.06 in.
3
Number of
Bolts
9
Length of Bolts,
L
[Note (4)]
Outside
Diameter of
Flange,
O
Nominal
Pipe Size
7
5
3
3
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For other dimensions see, Tables II 11 and II 12.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
170
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
Table II-11
Dimensions of Class 300 Flanges
X [Note (1)]
X [Note (1)]
B
tf
T
Y
O
Threaded
Slip-On Welding
X [Note (1)]
B
X [Note (1)]
B
Col. 11
Y
r
D
tf
tf
Y
O
B
Col. 13
Lapped
X
Ah
O
B
ASME B16.5-2013
Socket Welding (NPS 1/2 to 3 Only)
171
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
O
Y
tf
Y
tf
tf
O
Blind
Welding Neck
1
2
Outside
Diamter
of
Nominal Flange,
Pipe Size
O
1
⁄2
⁄4
1
11⁄4
11⁄2
3
3.75
4.62
4.88
5.25
6.12
3
4
5
6
7
8
9
10
Length Through Hub
Diameter
Beginning of
Minimum
Minimum
Chamfer
Threaded
Thread
Thickness of Thickness
Welding
Slip-On
Length
Flange,
of Lap
Diameter
Neck,
Socket
Welding Threaded,
Joint,
of Hub,
Ah
Welding, Lapped,
Neck,
T
tf
X
[Note (4)]
Y
Y
Y
[Note (5)]
[Notes (2)–(4)]
tf
0.50
0.56
0.62
0.69
0.75
0.56
0.62
0.69
0.75
0.81
1.50
1.88
2.12
2.50
2.75
0.84
1.05
1.32
1.66
1.90
0.81
0.94
1.00
1.00
1.13
0.88
1.00
1.06
1.06
1.19
2.00
2.19
2.38
2.50
2.63
0.62
0.62
0.69
0.81
0.88
11
12
13
Bore
Welding
Minimum
Neck/
Slip-On
Socket
Socket
Minimum Welding,
Welding, Lapped,
B
B
B
[Note (6)]
0.88
1.09
1.36
1.70
1.95
0.90
1.11
1.38
1.72
1.97
0.62
0.82
1.05
1.38
1.61
14
15
16
Corner
Bore
Minimum
Radius of CounterLapped
bore
Depth
Flange
Threaded
of
and Pipe, Flange, Socket,
r
Q
D
0.12
0.12
0.12
0.19
0.25
0.93
1.14
1.41
1.75
1.98
0.38
0.44
0.50
0.56
0.62
Table II-11
1
2
4
5
6
7
8
9
10
Length Through Hub
Diameter
Beginning of
Minimum
Minimum
Minimum
Chamfer
Threaded
Thread
Thickness of Thickness
Welding
Slip-On
Length
Flange,
of Lap
Diameter
Neck,
Socket
Welding Threaded,
tf
Joint,
of Hub,
Ah
Welding, Lapped,
Neck,
T
[Notes (2)–(4)]
tf
X
[Note (4)]
Y
Y
Y
[Note (5)]
11
12
13
Bore
Welding
Minimum
Neck/
Slip-On
Socket
Socket
Minimum Welding,
Welding, Lapped,
B
B
B
[Note (6)]
14
15
16
Corner
Bore
Minimum
Radius of CounterLapped
bore
Depth
Flange
Threaded
of
and Pipe, Flange, Socket,
r
Q
D
2
21⁄2
3
31⁄2
4
6.50
7.50
8.25
9.00
10.00
0.81
0.94
1.06
1.12
1.19
0.88
1.00
1.12
1.19
1.25
3.31
3.94
4.62
5.25
5.75
2.38
2.88
3.50
4.00
4.50
1.25
1.44
1.63
1.69
1.82
1.31
1.50
1.69
1.75
1.88
2.69
2.94
3.06
3.13
3.32
1.12
1.25
1.25
1.44
1.44
2.44
2.94
3.57
4.07
4.57
2.46
2.97
3.60
4.10
4.60
2.07
2.47
3.07
3.55
4.03
0.31
0.31
0.38
0.38
0.44
2.50
3.00
3.63
4.13
4.63
0.69
0.75
0.81
...
...
5
6
8
10
12
11.00
12.50
15.00
17.50
20.50
1.31
1.38
1.56
1.81
1.94
1.38
1.44
1.62
1.88
2.00
7.00
8.12
10.25
12.62
14.75
5.56
6.63
8.63
10.75
12.75
1.94
2.00
2.38
2.56
2.82
2.00
2.06
2.44
3.75
4.00
3.82
3.82
4.32
4.56
5.06
1.69
1.81
2.00
2.19
2.38
5.66
6.72
8.72
10.88
12.88
5.69
6.75
8.75
10.92
12.92
5.05
6.07
7.98
10.02
12.00
0.44
0.50
0.50
0.50
0.50
5.69
6.75
8.75
10.88
12.94
...
...
...
...
...
14
16
18
20
24
23.00
25.50
28.00
30.50
36.00
2.06
2.19
2.31
2.44
2.69
2.12
2.25
2.38
2.50
2.75
16.75
19.00
21.00
23.12
27.62
14.00
16.00
18.00
20.00
24.00
2.94
3.19
3.44
3.69
4.13
4.38
4.75
5.12
5.50
6.00
5.56
5.69
6.19
6.32
6.56
2.50
2.69
2.75
2.88
3.25
14.14
16.16
18.18
20.20
24.25
14.18
16.19
18.20
20.25
24.25
0.50
0.50
0.50
0.50
0.50
14.19
16.19
18.19
20.19
24.19
...
...
...
...
...
GENERAL NOTES:
(a) Dimensions of Table -11 are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -10.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table -6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
Note
Note
Note
Note
Note
(7)
(7)
(7)
(7)
(7)
ASME B16.5-2013
172
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Outside
Diamter
of
Nominal Flange,
Pipe Size
O
3
Dimensions of Class 300 Flanges (Cont’d)
Dimensions of Class 300 Flanges (Cont’d)
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This
dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.
(2) These flanges may be supplied with a flat face. The flat face may be either the full tf dimension thickness plus 0.06 in. or the tf dimension thickness without the raised face height.
See para. 6.3.2 for additional restrictions.
(3) The flange dimensions illustrated are for regularly furnished 0.06-in. raised face (except lapped); for requirements of other facings, see Fig. -6.
(4) For welding end bevel, see para. 6.7.
(5) For thread of threaded flanges, see para. 6.9.
(6) Dimensions in Column 13 correspond to the inside diameters of pipe as given in ASME B36.10M for standard wall pipe. Standard wall dimensions are the same as Schedule 40 in
sizes NPS 10 and smaller. Tolerances in para. 7.5.2 apply. These bore sizes are furnished unless otherwise specified by the Purchaser.
(7) To be specified by the Purchaser.
ASME B16.5-2013
173
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-11
Dimensions of Class 300 Flanged Fittings
BB
JJ
AA
HH
AA
HH
CC K
K
Elbow
CC
KK
Long Radius
Elbow
45-deg Elbow
GG
NN
AA
HH
AA
HH
AA
HH
AA
HH
Tee
Cross
GG
NN
EE L
L
AA
HH
A
HH A
FF
MM
FF
MM
1
2
3
45-deg Lateral
4
5
Reducer
6
7
Eccentric
Reducer
8
True “Y”
9
10
11
12
Ring Joint
[Note (4)]
0.06-in. Raised Face (Flange Edge) [Note (4)]
Center-toCenter-to-Contact
Short
Contact
End Elbow
Outside
Minimum
Minimum Inside Surface of Raised Center-to-Contact Center-to-Contact
Long
Center-to-Contact Surface-to-Contact
Tee,
Nominal Diameter
Thickness
Wall
Diameter Face Elbow, Tee, Surface of Raised Surface of Raised Center-to-Contact Surface of Raised Surface of Raised Cross, and
Pipe
of
of Flange,
Thickness
of
Cross, and
Face Long Radius
Face
Surface of Raised Face Lateral and
Face Reducer,
True “Y,”
of Fitting, Fitting,
True “Y,”
Elbow,
45-deg Elbow,
Face Lateral,
True “Y,”
GG
HH
Size,
Flange,
tf
NPS
O
[Notes (1)–(4)]
tm
d
AA
BB
CC
EE
FF
[Note (5)]
[Note (6)]
1
11⁄4
11⁄2
4.88
5.25
6.12
0.62
0.69
0.75
0.19
0.19
0.19
1.00
1.25
1.50
4.00
4.25
4.50
5.00
5.50
6.00
2.25
2.50
2.75
6.50
7.25
8.50
2.00
2.25
2.50
4.50
4.50
4.50
4.25
4.50
4.75
2
21⁄2
3
31⁄2
4
6.50
7.50
8.25
9.00
10.00
0.81
0.94
1.06
1.12
1.19
0.25
0.25
0.28
0.29
0.31
2.00
2.50
3.00
3.50
4.00
5.00
5.50
6.00
6.50
7.00
6.50
7.00
7.75
8.50
9.00
3.00
3.50
3.50
4.00
4.50
9.00
10.50
11.00
12.50
13.50
2.50
2.50
3.00
3.00
3.00
5.00
5.50
6.00
6.50
7.00
5.31
5.81
6.31
6.81
7.31
ASME B16.5-2013
90 deg
174
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
BB
JJ
AA
HH
EE
LL
AA
HH
A
HH A
Table II-12
(13)
1
2
3
4
5
Dimensions of Class 300 Flanged Fittings (Cont’d)
6
7
8
9
10
11
12
Ring Joint
[Note (4)]
0.06-in. Raised Face (Flange Edge) [Note (4)]
Center-toCenter-to-Contact
Short
Contact
End Elbow
Outside
Minimum
Minimum Inside Surface of Raised Center-to-Contact Center-to-Contact
Long
Center-to-Contact Surface-to-Contact
Tee,
Nominal Diameter
Thickness
Wall
Diameter Face Elbow, Tee, Surface of Raised Surface of Raised Center-to-Contact Surface of Raised Surface of Raised Cross, and
Pipe
of
of Flange,
Thickness
of
Cross, and
Face Long Radius
Face
Surface of Raised Face Lateral and
Face Reducer,
True “Y,”
Size,
Flange,
tf
of Fitting, Fitting,
True “Y,”
Elbow,
45-deg Elbow,
Face Lateral,
True “Y,”
GG
HH
NPS
O
[Notes (1)–(4)]
tm
d
AA
BB
CC
EE
FF
[Note (5)]
[Note (6)]
5
6
8
10
12
11.00
12.50
15.00
17.50
20.50
1.31
1.38
1.56
1.81
1.94
0.38
0.38
0.44
0.50
0.56
5.00
6.00
8.00
10.00
12.00
8.00
8.50
10.00
11.50
13.00
10.25
11.50
14.00
16.50
19.00
5.00
5.50
6.00
7.00
8.00
15.00
17.50
20.50
24.00
27.50
3.50
4.00
5.00
5.50
6.00
8.00
9.00
11.00
12.00
14.00
8.31
8.81
10.31
11.81
13.31
14
16
18
20
24
23.00
25.50
28.00
30.50
36.00
2.06
2.19
2.31
2.44
2.69
0.62
0.69
0.75
0.81
0.94
13.25
15.25
17.00
19.00
23.00
15.00
16.50
18.00
19.50
22.50
21.50
24.00
26.50
29.00
34.00
8.50
9.50
10.00
10.50
12.00
31.00
34.50
37.50
40.50
47.50
6.50
7.50
8.00
8.50
10.00
16.00
18.00
19.00
20.00
24.00
15.31
10.81
18.31
19.89
22.94
ASME B16.5-2013
175
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-12
(13)
Table II-12
(13)
O
Dimensions of Class 300 Flanged Fittings (Cont’d)
d
tf
S
t
S
T
R
U
T
14
15
16
17
R
S
Base Tee
18
19
20
21
22
23
1
Thickness of
Base,
T
[Notes (7)–(10)]
Thickness
of Ribs,
U
[Note (7)]
Bolt Circle
or Bolt
Spacing,
W
Diameter
of
Drilled
Holes
Nominal
Pipe
Size,
NPS
...
...
...
1
11⁄4
11⁄2
Ring Joint [Note (5)]
Base Drilling
[Note (11)]
Center-to-End
Long Radius
Elbow,
JJ
[Note (7)]
Center-to-End
45-deg
Elbow,
KK
[Note (7)]
Long
Center-to-End
Lateral,
LL
[Note (7)]
Short
Center-to-End
Lateral and
True “Y,”
MM
[Note (7)]
End-toEnd
Reducer,
NN
Center-toBase,
R
[Notes (7)–(9)]
Diameter of
Round Base
or Width of
Square Base,
S
[Note (7)]
5.25
5.75
6.25
2.50
2.75
3.00
6.75
7.50
8.75
2.25
2.50
2.75
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
6.81
7.31
8.06
8.81
9.31
3.31
3.81
3.81
4.31
4.88
9.31
10.81
11.31
12.81
13.81
2.81
2.81
3.31
3.31
3.31
...
...
...
...
...
4.50
4.75
5.25
5.62
6.00
5.25
5.25
6.12
6.12
6.50
0.75
0.75
0.81
0.81
0.88
0.50
0.50
0.62
0.62
0.62
3.88
3.88
4.50
4.50
5.00
3
⁄4
⁄4
7
⁄8
7
⁄8
3
⁄4
2
21⁄2
3
31⁄2
4
10.56
11.81
14.31
16.81
19.31
5.31
5.81
6.31
7.31
8.31
15.31
17.81
20.81
24.31
27.81
3.81
4.31
5.31
5.81
6.31
...
...
...
...
...
6.75
7.50
9.00
10.50
12.00
7.50
7.50
10.00
10.00
12.50
1.00
1.00
1.25
1.25
1.44
0.75
0.75
0.88
0.88
1.00
5.88
5.88
7.88
7.88
10.62
7
5
6
8
10
12
3
⁄8
⁄8
7
⁄8
7
⁄8
7
⁄8
7
ASME B16.5-2013
S
Base Elbow
13
S
Square Base
Four bolt holes
Round Base
U
176
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Flanged Fitting
Table II-12
(13)
13
14
15
16
Dimensions of Class 300 Flanged Fittings (Cont’d)
17
18
19
20
21
22
23
1
Ring Joint [Note (5)]
Center-to-End
45-deg
Elbow,
KK
[Note (7)]
Long
Center-to-End
Lateral,
LL
[Note (7)]
21.81
24.31
26.81
29.38
34.44
8.81
9.81
10.31
10.88
12.44
31.31
34.81
37.81
40.88
47.94
6.81
7.81
8.31
8.88
10.44
End-toEnd
Reducer,
NN
Center-toBase,
R
[Notes (7)–(9)]
Diameter of
Round Base
or Width of
Square Base,
S
[Note (7)]
...
...
...
...
...
13.50
14.75
16.25
17.88
20.75
12.50
12.50
15.00
15.00
17.50
Base Drilling
[Note (11)]
Thickness of
Base,
T
[Notes (7)–(10)]
1.44
1.44
1.62
1.62
1.88
Thickness
of Ribs,
U
[Note (7)]
1.00
1.12
1.12
1.25
1.25
Bolt Circle
or Bolt
Spacing,
W
10.62
10.62
13.00
13.00
15.25
Diameter
of
Drilled
Holes
7
⁄8
⁄8
1
1
11⁄8
7
Nominal
Pipe
Size,
NPS
14
16
18
20
24
GENERAL NOTES:
(a) Dimensions of Table -12 are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -10.
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.1.
(i) For drains, see para. 6.12.
NOTES:
(1) These fittings may be supplied with a flat face flange. The flat face may be either the full tf dimension thickness plus 0.06 in. or the tf dimension thickness without the raised face
height. See para. 6.3.2 for additional restrictions.
(2) The thickness of the flange dimension illustrated is for regularly furnished 0.06-in. raised face (except lapped); for thickness requirements of other facings, see Fig. -6.
(3) The thickness of flange minimum dimensions for loose flanges, Table 9, size NPS 31⁄2 and smaller are slightly heavier than for flanges on these fittings that are reinforced by being
cast integral with the body of fitting.
(4) For center-to-contact surface and center-to-end dimensioins of reducing fittings, see para. 6.2.3.
(5) For contact surface-to-contact surface and end-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(6) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use center-tocontact surface or contact surface-to-contact surface dimensions of 0.06-in. raised face (flange edge) for the largest opening, and add the proper height to provide for the ring joint
groove applying to each flange. See Table -5 for ring joint facing dimensions.
(7) The base dimensions apply to all straight and reducing sizes.
(8) The reducing fittings, the size, and center-to-face dimension of base are determined by the size of the largest opening of fittings. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(9) Bases shall be plain faced unless otherwise specified, and the center-to-base dimension R shall be the finished dimension.
(10) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(11) The bolt hole template for round base is the same as for Class 300 flanges (Table 11) of corresponding outside diameter, except using only four holes in all cases so placed as to
straddle centerlines. The bases of these fittings are intended for support in compression and are not for anchors or supports in tension or shear.
ASME B16.5-2013
177
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Center-to-End
Long Radius
Elbow,
JJ
[Note (7)]
Short
Center-to-End
Lateral and
True “Y,”
MM
[Note (7)]
ASME B16.5-2013
Table II-13 Templates for Drilling Class 400 Flanges
O
L
Point height [Note (1)]
Flange
1
Nominal
Pipe
Size
2
Outside
Diameter
of
Flange,
O
3
Stud Bolt With Nuts
4
5
6
7
Diameter of
Bolt Holes
Number
of Bolts
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Diameter of
Bolt Circle,
W
8
Diameter
of Bolts
Raised
Face
0.25 in.
Male and
Female/
Tongue
and Groove
Ring
Joint
1
⁄2
⁄4
1
11⁄4
11⁄2
3
Use Class 600 dimensions in these sizes
2
21⁄2
3
31⁄2
7
4
5
6
8
10
12
10.00
11.00
12.50
15.00
17.50
20.50
7.88
9.25
10.62
13.00
15.25
17.75
1
1
1
11⁄8
11⁄4
13⁄8
8
8
12
12
16
16
⁄8
⁄8
7
⁄8
1
11⁄8
11⁄4
5.50
5.75
6.00
6.75
7.50
8.00
5.25
5.25
5.75
6.50
7.25
7.75
5.50
5.75
6.00
6.75
7.50
8.00
14
16
18
20
24
23.00
25.50
28.00
30.50
36.00
20.25
22.50
24.75
27.00
32.00
13⁄8
11⁄2
11⁄2
15⁄8
17⁄8
20
20
24
24
24
11⁄4
13⁄8
13⁄8
11⁄2
13⁄4
8.25
8.75
9.00
9.50
10.50
8.00
8.50
8.75
9.25
10.25
8.25
8.75
9.00
9.75
11.00
7
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For other dimensions, see Table II 14.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
178
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-14 Dimensions of Class 400 Flanges
X [Note (1)]
X [Note (1)]
B
Q
T
Y
tf
tf
O
O
Threaded
Slip-On Welding
Y
X [Note (1)]
B
Y
r
tf
O
Lapped
X
Ah
O
Y
B
tf
tf
O
Blind
Welding Neck
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Hub Diam.
Minimum
Corner
Beginning
Thread
Bore
Outside
Min.
of Chamfer
Length
Radius of Minimum
Length Through Hub
Bore
Diam. Thickness Diam. Welding
Threaded
Lapped Counterbore
Nom.
of
of
of
Neck,
Threaded
Welding Flange,
Min.
Min. Welding Flange
Threaded
Slip-On, Lapped, Neck,
T
Slip-On, Lapped, Neck, and Pipe,
Flange,
Pipe Flange, Flange, Hub,
Ah
Size
O
tf
X
[Note (2)]
Y
Y
Y
[Note (3)]
B
B
B
r
Q
1
⁄2
⁄4
1
11⁄4
11⁄2
2
21⁄2
3
31⁄2
3
Use Class 600 dimensions in these sizes [Note (4)]
4
5
6
8
10
12
10.00
11.00
12.50
15.00
17.50
20.50
1.38
1.50
1.62
1.88
2.12
2.25
5.75
7.00
8.12
10.25
12.62
14.75
4.50
5.56
6.63
8.63
10.75
12.75
2.00
2.12
2.25
2.69
2.88
3.12
2.00
2.12
2.25
2.69
4.00
4.25
3.50
4.00
4.06
4.62
4.88
5.38
1.44
1.69
1.81
2.00
2.19
2.38
4.57
5.66
6.72
8.72
10.88
12.88
4.60
5.69
6.75
8.75
10.92
12.92
Note
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
(5)
0.44
0.44
0.50
0.50
0.50
0.50
4.63
5.69
6.75
8.75
10.88
12.94
14
16
18
20
24
23.00
25.50
28.00
30.50
36.00
2.38
2.50
2.62
2.75
3.00
16.75
19.00
21.00
23.12
27.62
14.00
16.00
18.00
20.00
24.00
3.31
3.69
3.88
4.00
4.50
4.62
5.00
5.38
5.75
6.25
5.88
6.00
6.50
6.62
6.88
2.50
2.69
2.75
2.88
3.25
14.14
16.16
18.18
20.20
24.25
14.18
16.19
18.20
20.25
24.25
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
0.50
0.50
0.50
0.50
0.50
14.19
16.19
18.19
20.19
24.19
179
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-14 Dimensions of Class 400 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table II 13.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip on flanges, see Table II 6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip on,
and lapped flanges.
(2) For welding end bevel, see para. 6.7.
(3) For thread in threaded flanges, see para. 6.9.
(4) Socket welding flanges may be provided in NPS 1⁄2 through 21⁄2 using Class 600 dimensions.
(5) To be specified by the Purchaser.
180
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table II-15 Templates for Drilling Class 600 Pipe Flanges and Flanged Fittings
O
L
Point height [Note (1)]
Flange
1
2
3
Stud Bolt With Nuts
4
5
6
7
Drilling [Notes (2), (3)]
Diameter of
Bolt Circle,
W
⁄2
⁄4
1
11⁄4
11⁄2
3.75
4.62
4.88
5.25
6.12
2.62
3.25
3.50
3.88
4.50
5
⁄8
⁄4
3
⁄4
3
⁄4
7
⁄8
4
4
4
4
4
1
2
21⁄2
3
31⁄2
4
6.50
7.50
8.25
9.00
10.75
5.00
5.88
6.62
7.25
8.50
3
⁄4
⁄8
7
⁄8
1
1
8
8
8
8
8
5
6
8
10
12
13.00
14.00
16.50
20.00
22.00
10.50
11.50
13.75
17.00
19.25
11⁄8
11⁄8
11⁄4
13⁄8
13⁄8
14
16
18
20
24
23.75
27.00
29.25
32.00
37.00
20.75
23.75
25.75
28.50
33.00
11⁄2
15⁄8
13⁄4
13⁄4
2
1
3
Diameter of
Bolt Holes
3
7
Number of
Bolts
9
Length of Bolts,
L
[Notes (1), (4)]
Outside
Diameter
of Flange,
O
Nominal
Pipe Size
8
Diameter of
Bolts
Raised Face
0.25 in.
Male and Female/
Tongue and Groove
Ring Joint
⁄2
⁄8
5
⁄8
5
⁄8
3
⁄4
3.00
3.50
3.50
3.75
4.25
2.75
3.25
3.25
3.50
4.00
3.00
3.50
3.50
3.75
4.25
5
⁄8
⁄4
3
⁄4
7
⁄8
7
⁄8
4.25
4.75
5.00
5.50
5.75
4.00
4.50
4.75
5.25
5.50
4.25
4.75
5.00
5.50
5.75
8
12
12
16
20
1
1
11⁄8
11⁄4
11⁄4
6.50
6.75
7.50
8.50
8.75
6.25
6.50
7.25
8.25
8.50
6.50
6.75
7.75
8.50
8.75
20
20
20
24
24
13⁄8
11⁄2
15⁄8
15⁄8
17⁄8
9.25
10.00
10.75
11.25
13.00
9.00
9.75
10.50
11.00
12.75
9.25
10.00
10.75
11.50
13.25
5
3
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For other dimensions, see Table II 16.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
181
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-16
Dimensions of Class 600 Flanges
X [Note (1)]
B
X [Note (1)]
Q
tf
T
Y
tf
O
Threaded
Slip-On Welding
X [Note (1)]
B
X [Note (1)]
B
Col. 10
r
D
tf
Y
tf
Y
O
B
Col. 12
O
Socket Welding (NPS 1/2 to 3 Only)
Lapped
ASME B16.5-2013
X
Ah
182
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
Y
O
Y
B
tf
tf
O
Blind
Welding Neck
1
Nominal
Pipe Size
1
⁄2
⁄4
1
11⁄4
11⁄2
3
2
3
4
5
Threaded
Slip-On
Socket
Welding,
Y
0.88
1.00
1.06
1.12
1.25
Outside
Diameter
of Flange,
O
Minimum
Thickness
of Flange,
tf
Diameter
of Hub,
X
Hub
Diameter
Beginning of
Chamfer
Welding
Neck,
Ah
[Note (2)]
3.75
4.62
4.88
5.25
6.12
0.56
0.62
0.69
0.81
0.88
1.50
1.88
2.12
2.50
2.75
0.84
1.05
1.32
1.66
1.90
6
7
8
9
Lapped,
Y
Welding
Neck,
Y
Minimum
Thread
Length
Threaded
Flange,
T
[Note (3)]
Minimum
Slip-On
Socket
Welding,
B
Minimum
Lapped,
B
0.88
1.00
1.06
1.12
1.25
2.06
2.25
2.44
2.62
2.75
0.62
0.62
0.69
0.81
0.88
0.88
1.09
1.36
1.70
1.95
0.90
1.11
1.38
1.72
1.97
Length Through Hub
10
11
12
13
14
15
Welding
Neck/
Socket
Welding,
B
Corner
Bore
Radius of
Lapped
Flange
and Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Depth
of
Socket,
D
0.12
0.12
0.12
0.19
0.25
0.93
1.14
1.41
1.75
1.99
0.38
0.44
0.50
0.56
0.62
Bore
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
Table II-16
1
2
3
Dimensions of Class 600 Flanges (Cont’d)
5
6
7
Threaded
Slip-On
Socket
Welding,
Y
8
9
10
11
Lapped,
Y
Welding
Neck,
Y
Minimum
Thread
Length
Threaded
Flange,
T
[Note (3)]
Minimum
Slip-On
Socket
Welding,
B
Minimum
Lapped,
B
12
13
14
15
Welding
Neck/
Socket
Welding,
B
Corner
Bore
Radius of
Lapped
Flange
and Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Depth
of
Socket,
D
Nominal
Pipe Size
Outside
Diameter
of Flange,
O
Minimum
Thickness
of Flange,
tf
Diameter
of Hub,
X
Hub
Diameter
Beginning of
Chamfer
Welding
Neck,
Ah
[Note (2)]
2
21⁄2
3
31⁄2
4
6.50
7.50
8.25
9.00
10.75
1.00
1.12
1.25
1.38
1.50
3.31
3.94
4.62
5.25
6.00
2.38
2.88
3.50
4.00
4.50
1.44
1.62
1.81
1.94
2.12
1.44
1.62
1.81
1.94
2.12
2.88
3.12
3.25
3.38
4.00
1.12
1.25
1.38
1.56
1.62
2.44
2.94
3.57
4.07
4.57
2.46
2.97
3.60
4.10
4.60
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.31
0.31
0.38
0.38
0.44
2.50
3.00
3.63
4.13
4.63
0.69
0.75
0.81
...
...
5
6
8
10
12
13.00
14.00
16.50
20.00
22.00
1.75
1.88
2.19
2.50
2.62
7.44
8.75
10.75
13.50
15.75
5.56
6.63
8.63
10.75
12.75
2.38
2.62
3.00
3.38
3.62
2.38
2.62
3.00
4.38
4.62
4.50
4.62
5.25
6.00
6.12
1.88
2.00
2.25
2.56
2.75
5.66
6.72
8.72
10.88
12.88
5.69
6.75
8.75
10.92
12.92
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.44
0.50
0.50
0.50
0.50
5.69
6.75
8.75
10.88
12.94
...
...
...
...
...
14
16
18
20
24
23.75
27.00
29.25
32.00
37.00
2.75
3.00
3.25
3.50
4.00
17.00
19.50
21.50
24.00
28.25
14.00
16.00
18.00
20.00
24.00
3.69
4.19
4.62
5.00
5.50
5.00
5.50
6.00
6.50
7.25
6.50
7.00
7.25
7.50
8.00
2.88
3.06
3.12
3.25
3.62
14.14
16.16
18.18
20.20
24.25
14.18
16.19
18.20
20.25
24.25
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.50
0.50
0.50
0.50
0.50
14.19
16.19
18.19
20.19
24.19
...
...
...
...
...
Length Through Hub
Bore
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -15.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table -6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges.
(2) For welding end bevel, see para. 6.7.
(3) For threads in threaded flanges, see para. 6.9.
(4) To be specified by the Purchaser.
ASME B16.5-2013
183
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
4
ASME B16.5-2013
Table II-17 Templates for Drilling Class 900 Pipe Flanges and Flanged Fittings
O
L
Point height [Note (1)]
Flange
1
Nominal
Pipe Size
2
Outside
Diameter of
Flange,
O
3
Stud Bolt With Nuts
4
5
6
7
Diameter of
Bolt Holes
Number of
Bolts
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Diameter of
Bolt Circle,
W
8
Diameter of
Bolts
Raised Face
0.25 in.
Male and Female/
Tongue and Groove
Ring
Joint
1
⁄2
⁄4
3
1
11⁄4
11⁄2
2
21⁄2
Use Class 1500 dimensions in these sizes
7
3
4
9.50
11.50
7.50
9.25
1
11⁄4
8
8
⁄8
11⁄8
5.75
6.75
5.50
6.50
5.75
6.75
5
6
8
10
12
13.75
15.00
18.50
21.50
24.00
11.00
12.50
15.50
18.50
21.00
13⁄8
11⁄4
11⁄2
11⁄2
11⁄2
8
12
12
16
20
11⁄4
11⁄8
13⁄8
13⁄8
13⁄8
7.50
7.50
8.75
9.25
10.00
7.25
7.25
8.50
9.00
9.75
7.50
7.75
8.75
9.25
10.00
14
16
18
20
24
25.25
27.75
31.00
33.75
41.00
22.00
24.25
27.00
29.50
35.50
15⁄8
13⁄4
2
21⁄8
25⁄8
20
20
20
20
20
11⁄2
15⁄8
17⁄8
2
21⁄2
10.75
11.25
12.75
13.75
17.25
10.50
11.00
12.50
13.50
17.00
11.00
11.50
13.25
14.25
18.00
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For other dimensions, see Table II 18 and II 19.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
184
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-18
Dimensions of Class 900 Flanges
X [Note (1)]
X [Note (1)]
B
Q
T
Y
tf
tf
O
Threaded
Slip-On Welding
X [Note (1)]
B
Y
r
tf
O
Lapped
ASME B16.5-2013
X
Ah
185
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
Y
O
Y
B
tf
tf
O
Blind
Welding Neck
1
2
Nominal
Pipe Size
Outside
Diameter
of
Flange,
O
3
Minimum
Thickness
of Flange,
tf
4
5
Diameter
of Hub,
X
Hub Diameter
Beginning of
Chamfer
Welding Neck,
Ah
[Note (2)]
6
7
8
9
Welding
Neck,
Y
Minimum
Thread Length
Threaded
Flange,
T
[Note (3)]
Length Through Hub
Threaded
Slip-On,
Y
Lapped,
Y
10
Minimum
Slip-On,
B
3
1
1 ⁄2
2
21⁄2
12
13
14
Welding
Neck,
B
Corner Bore
Radius of
Lapped
Flange and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Bore
1
⁄2
⁄4
1
11⁄4
11
Use Class 1500 dimensions in these sizes [Note (4)]
Minimum
Lapped,
B
Table II-18
2
Nominal
Pipe Size
Outside
Diameter
of
Flange,
O
3
4
3
4
5
Minimum
Thickness
of Flange,
tf
Diameter
of Hub,
X
Hub Diameter
Beginning of
Chamfer
Welding Neck,
Ah
[Note (2)]
9.50
11.50
1.50
1.75
5.00
6.25
3.50
4.50
5
6
8
10
12
13.75
15.00
18.50
21.50
24.00
2.00
2.19
2.50
2.75
3.12
7.50
9.25
11.75
14.50
16.50
14
16
18
20
24
25.25
27.75
31.00
33.75
41.00
3.38
3.50
4.00
4.25
5.50
17.75
20.00
22.25
24.50
29.50
6
7
8
9
Lapped,
Y
Welding
Neck,
Y
Minimum
Thread Length
Threaded
Flange,
T
[Note (3)]
2.12
2.75
2.12
2.75
4.00
4.50
5.56
6.63
8.63
10.75
12.75
3.12
3.38
4.00
4.25
4.62
3.12
3.38
4.50
5.00
5.62
14.00
16.00
18.00
20.00
24.00
5.12
5.25
6.00
6.25
8.00
6.12
6.50
7.50
8.25
10.50
Length Through Hub
Threaded
Slip-On,
Y
10
11
12
13
14
Corner Bore
Radius of
Lapped
Flange and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Bore
Minimum
Slip-On,
B
Minimum
Lapped,
B
Welding
Neck,
B
1.62
1.88
3.57
4.57
3.60
4.60
Note (5)
Note (5)
0.38
0.44
3.63
4.63
5.00
5.50
6.38
7.25
7.88
2.12
2.25
2.50
2.81
3.00
5.66
6.72
8.72
10.88
12.88
5.69
6.75
8.75
10.92
12.92
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
0.44
0.50
0.50
0.50
0.50
5.69
6.75
8.75
10.88
12.94
8.38
8.50
9.00
9.75
11.50
3.25
3.38
3.50
3.62
4.00
14.14
16.16
18.18
20.20
24.25
14.18
16.19
18.20
20.25
24.25
Note
Note
Note
Note
Note
(5)
(5)
(5)
(5)
(5)
0.50
0.50
0.50
0.50
0.50
14.19
16.19
18.19
20.19
24.19
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -17.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table -6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges.
(2) For welding end bevel, see para. 6.7.
(3) For threads in threaded flanges, see para. 6.9.
(4) Socket welding flanges may be provided in NPS 1⁄2 through 21⁄2 using Class 1500 dimensions.
(5) To be specified by the Purchaser.
ASME B16.5-2013
186
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
1
Dimensions of Class 900 Flanges (Cont’d)
ASME B16.5-2013
Table II-19 Templates for Drilling Class 1500 Pipe Flanges
O
L
Point height [Note (1)]
Flange
1
Nominal
Pipe Size
1
2
3
Outside
Diameter of
Flange,
O
4
5
6
7
Diameter of
Bolt Circle,
W
4.75
5.12
5.88
6.25
3.25
3.50
4.00
4.38
11⁄2
2
21⁄2
3
4
7.00
8.50
9.62
10.50
12.25
5
6
8
10
12
14
16
18
20
24
Diameter of
Bolt Holes
7
Number of
Bolts
8
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
⁄2
⁄4
1
11⁄4
3
Stud Bolt With Nuts
Diameter of
Bolts
Raised Face
0.25 in.
Male and Female/
Tongue and Groove
Ring Joint
⁄4
⁄4
7
⁄8
7
⁄8
4.25
4.50
5.00
5.00
4.00
4.25
4.75
4.75
4.25
4.50
5.00
5.00
3
⁄8
⁄8
1
1
4
4
4
4
4.88
6.50
7.50
8.00
9.50
11⁄8
1
11⁄8
11⁄4
13⁄8
4
8
8
8
8
1
⁄8
1
11⁄8
11⁄4
5.50
5.75
6.25
7.00
7.75
5.25
5.50
6.00
6.75
7.50
5.50
5.75
6.25
7.00
7.75
14.75
15.50
19.00
23.00
26.50
11.50
12.50
15.50
19.00
22.50
15⁄8
11⁄2
13⁄4
2
21⁄8
8
12
12
12
16
11⁄2
13⁄8
15⁄8
17⁄8
2
9.75
10.25
11.50
13.25
14.75
9.50
10.00
11.25
13.00
14.50
9.75
10.50
11.75
13.50
15.25
29.50
32.50
36.00
38.75
46.00
25.00
27.75
30.50
32.75
39.00
23⁄8
25⁄8
27⁄8
31⁄8
35⁄8
16
16
16
16
16
21⁄4
21⁄2
23⁄4
3
31⁄2
16.00
17.50
19.50
21.25
24.25
15.75
17.25
19.25
21.00
24.00
16.75
18.50
20.75
22.25
25.50
7
3
7
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For other dimensions, see Table II 20.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
187
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-20
Dimensions of Class 1500 Flanges
X [Note (1)]
B
X [Note (1)]
Q
Y
tf
T
tf
O
Threaded (NPS 1/2 to 21/2 Only)
Slip-On Welding (NPS 1/2 to 21/2 Only)
X [Note (1)]
B
X [Note (1)]
B
Col. 10
Y
r
D
tf
tf
Y
O
B
Col. 12
O
Lapped
Socket Welding (NPS 1/2 to 21/2 Only)
X
Ah
O
B
ASME B16.5-2013
188
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
O
Y
Y
tf
tf
O
Blind
Welding Neck
1
Nominal
Pipe Size
1
⁄2
⁄4
1
11⁄4
3
2
3
Outside
Diameter Minimum
of
Thickness
Flange, of Flange,
O
tf
4.75
5.12
5.88
6.25
0.88
1.00
1.12
1.12
4
5
6
7
8
Length Through Hub
Hub Diameter
Beginning of Threaded
Chamfer
Slip-On
Diameter Welding Neck,
Socket
Welding
of Hub,
Ah
Welding, Lapped
Neck,
X
[Note (2)]
Y
Y
Y
1.50
1.75
2.06
2.50
0.84
1.05
1.32
1.66
1.25
1.38
1.62
1.62
1.25
1.38
1.62
1.62
2.38
2.75
2.88
2.88
9
10
11
Bore
Minimum
Thread Length Minimum
Threaded
Slip-On
Flange,
Socket
Minimum
T
Welding, Lapped,
[Note (3)]
B
B
0.88
1.00
1.12
1.19
0.88
1.09
1.36
1.70
0.90
1.11
1.38
1.72
12
13
14
15
Welding
Neck/
Socket
Welding,
B
Corner Bore
Radius of
Lapped
Flange and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Depth of
Socket,
D
0.93
1.14
1.41
1.75
0.38
0.44
0.50
0.56
Note
Note
Note
Note
(4)
(4)
(4)
(4)
0.12
0.12
0.12
0.19
Table II-20
1
3
Outside
Diameter Minimum
of
Thickness
Flange, of Flange,
O
tf
4
5
6
7
8
Length Through Hub
Hub Diameter
Beginning of Threaded
Chamfer
Slip-On
Diameter Welding Neck,
Socket
Welding
of Hub,
Ah
Welding, Lapped
Neck,
X
[Note (2)]
Y
Y
Y
9
10
11
Bore
Minimum
Thread Length Minimum
Threaded
Slip-On
Flange,
Socket
Minimum
T
Welding, Lapped,
[Note (3)]
B
B
12
13
14
15
Welding
Neck/
Socket
Welding,
B
Corner Bore
Radius of
Lapped
Flange and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Depth of
Socket,
D
11⁄2
2
21⁄2
3
4
7.00
8.5O
9.62
10.50
12.25
1.25
1.50
1.62
1.88
2.12
2.75
4.12
4.88
5.25
6.38
1.90
2.38
2.88
3.50
4.50
1.75
2.25
2.50
...
...
1.75
2.25
2.50
2.88
3.56
3.25
4.00
4.12
4.62
4.88
1.25
1.50
1.88
...
...
1.95
2.44
2.94
...
...
1.97
2.46
2.97
3.60
4.60
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.25
0.31
0.31
0.38
0.44
1.99
2.50
3.00
...
...
0.62
0.69
0.75
...
...
5
6
8
10
12
14.75
15.50
19.00
23.00
26.50
2.88
3.25
3.62
4.25
4.88
7.75
9.00
11.50
14.50
17.75
5.56
6.63
8.63
10.75
12.75
...
...
...
...
...
4.12
4.69
5.62
7.00
8.62
6.12
6.75
8.38
10.00
11.12
...
...
...
...
...
...
...
...
...
...
5.69
6.75
8.75
10.92
12.92
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.44
0.50
0.50
0.50
0.50
...
...
...
...
...
...
...
...
...
...
14
16
18
20
24
29.50
32.50
36.00
38.75
46.00
5.25
5.75
6.38
7.00
8.00
19.50
21.75
23.50
25.25
30.00
14.00
16.00
18.00
20.00
24.00
...
...
...
...
...
9.50
10.25
10.88
11.50
13.00
11.75
12.25
12.88
14.00
16.00
...
...
...
...
...
...
...
...
...
...
14.18
16.19
18.20
20.25
24.25
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.50
0.50
0.50
0.50
0.50
...
...
...
...
...
...
...
...
...
...
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -19.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table -6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges.
(2) For welding end bevel, see para. 6.7.
(3) For threads in threaded flanges, see para. 6.9.
(4) To be specified by the Purchaser.
ASME B16.5-2013
189
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Nominal
Pipe Size
2
Dimensions of Class 1500 Flanges (Cont’d)
ASME B16.5-2013
Table II-21 Templates for Drilling Class 2500 Pipe Flanges
O
L
Point height [Note (1)]
Flange
1
Nominal
Pipe Size
1
2
Outside
Diameter of
Flange,
O
3
Stud Bolt With Nuts
4
5
6
7
Diameter of
Bolt Holes
7
Number of
Bolts
9
Length of Bolts,
L
[Notes (1), (4)]
Drilling [Notes (2), (3)]
Diameter of
Bolt Circle,
W
8
Diameter of
Bolts
3
Raised Face
0.25 in.
Male and Female/
Tongue and Groove
Ring Joint
⁄2
⁄4
1
11⁄4
11⁄2
5.25
5.50
6.25
7.25
8.00
3.50
3.75
4.25
5.12
5.75
⁄8
⁄8
1
11⁄8
11⁄4
4
4
4
4
4
⁄4
⁄4
7
⁄8
1
11⁄8
4.75
5.00
5.50
6.00
6.75
4.50
4.75
5.25
5.75
6.50
4.75
5.00
5.50
6.00
6.75
2
21⁄2
3
4
9.25
10.50
12.00
14.00
6.75
7.75
9.00
10.75
11⁄8
11⁄4
13⁄8
15⁄8
8
8
8
8
1
11⁄8
11⁄4
11⁄2
7.00
7.75
8.75
10.00
6.75
7.50
8.50
9.75
7.00
8.00
9.00
10.25
5
6
8
10
12
16.50
19.00
21.75
26.50
30.00
12.75
14.50
17.25
21.25
24.38
17⁄8
21⁄8
21⁄8
25⁄8
27⁄8
8
8
12
12
12
13⁄4
2
2
21⁄2
23⁄4
11.75
13.50
15.00
19.25
21.25
11.50
13.25
14.75
19.00
21.00
12.25
14.00
15.50
20.00
22.00
3
7
3
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For other dimensions, see Table II 22.
NOTES:
(1) The length of the stud bolt does not include the height of the points (see para. 6.10.2).
(2) For flange bolt holes, see para. 6.5.
(3) For spot facing, see para. 6.6.
(4) Bolt lengths not shown in the table may be determined in accordance with Nonmandatory Appendix C (see para. 6.10.2).
190
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table II-22
Dimensions of Class 2500 Flanges
X [Note (1)]
B
X [Note (1)]
Q
tf
T
Y
r
Y
O
O
Threaded
(NPS 1/2 to 21/2 Only)
Lapped
X
Ah
O
Y
B
tf
tf
Welding Neck
1
2
3
4
5
6
7
8
9
Lapped,
Y
Welding
Neck
Y
Minimum
Thread Length
Threaded
Flange,
T
[Note (3)]
10
11
12
13
Welding
Neck,
B
Corner Bore
Radius of
Lapped
Flange and
Pipe,
r
Minimum
Counterbore
Threaded
Flange,
Q
Outside
Diameter of
Flange,
O
Minimum
Thickness of
Flange,
tf
Diameter
of Hub,
X
Hub Diameter
Beginning of
Chamfer
Welding Neck,
Ah
[Note (2)]
⁄2
⁄4
1
11⁄4
11⁄2
5.25
5.50
6.25
7.25
8.00
1.19
1.25
1.38
1.50
1.75
1.69
2.00
2.25
2.88
3.12
0.84
1.05
1.32
1.66
1.90
1.56
1.69
1.88
2.06
2.38
1.56
1.69
1.88
2.06
2.38
2.88
3.12
3.50
3.75
4.38
1.12
1.25
1.38
1.50
1.75
0.90
1.11
1.38
1.72
1.97
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.12
0.12
0.12
0.19
0.25
0.93
1.14
1.41
1.75
1.99
2
21⁄2
3
4
9.25
10.50
12.00
14.00
2.00
2.25
2.62
3.00
3.75
4.50
5.25
6.50
2.38
2.88
3.50
4.50
2.75
3.12
...
...
2.75
3.12
3.62
4.25
5.00
5.62
6.62
7.50
2.00
2.25
...
...
2.46
2.97
3.60
4.60
Note
Note
Note
Note
(4)
(4)
(4)
(4)
0.31
0.31
0.38
0.44
2.50
3.00
...
...
5
6
8
10
12
16.50
19.00
21.75
26.50
30.00
3.62
4.25
5.00
6.50
7.25
8.00
9.25
12.00
14.75
17.38
5.56
6.63
8.63
10.75
12.75
...
...
...
...
...
5.12
6.00
7.00
9.00
10.00
9.00
10.75
12.50
16.50
18.25
...
...
...
...
...
5.69
6.75
8.75
10.92
12.92
Note
Note
Note
Note
Note
(4)
(4)
(4)
(4)
(4)
0.44
0.50
0.50
0.50
0.50
...
...
...
...
...
Nominal
Pipe Size
1
3
Length Through Hub
Threaded,
Y
Bore
Minimum
Lapped,
B
ASME B16.5-2013
O
Blind
191
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
tf
Table II-22
Dimensions of Class 2500 Flanges (Cont’d)
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -21.
(e) For spot facing, see para. 6.6.
(f) For reducing threaded and slip-on flanges, see Table -6.
(g) Blind flanges may be made with or without hubs at the manufacturer’s option.
(h) For reducing welding neck flanges, see para. 6.8.
NOTES:
(1) This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded and lapped flanges.
(2) For welding end bevel, see para. 6.7.
(3) For threads in threaded flanges, see para. 6.9.
(4) To be specified by the Purchaser.
ASME B16.5-2013
192
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
ASME B16.5-2013
MANDATORY APPENDIX III
REFERENCES
The following is a list of standards and specifications
referenced in this Standard. Products covered by each
ASTM specification are listed for convenience. For
ASME Codes and Standards referenced hereunder, up
to and including the latest published edition in effect
at the time this edition of this Standard is specified, may
be used. (See specifications for exact titles and detailed
contents.) Materials manufactured to other editions of
the referenced ASTM specifications may be used to manufacture flanges and flanged fittings meeting the
requirements of this Standard as long as the
flange/fitting manufacturer verifies that the material
meets the requirements of the referenced edition of the
ASTM specification.
ASTM A182-2007, Forged or Rolled Alloy-Steel Pipe
Flanges, Forged Fittings, and Valves and Parts for
High Temperature Service
ASTM A193-2007, Alloy-Steel and Stainless Steel Bolting
Materials for High-Temperature or High-Pressure
Service and Other Special Purpose Applications
ASTM A194-2007a, Carbon and Alloy Steel Nuts for
Bolts for High-Pressure and High-Temperature
Service, or Both
ASTM A203-1997, Pressure Vessel Plates, Alloy Steel,
Nickel
ASTM A204-2003, Pressure Vessel Plates, Alloy Steel,
Molybdenum
ASTM A216-2007, Steel Castings, Carbon, Suitable for
Fusion Welding, for High-Temperature Service
ASTM A217-2007, Steel Castings, Martensitic Stainless
and Alloy, for Pressure Containing Parts, Suitable for
High-Temperature Service
ASTM A240-2007, Chromium and Chromium-Nickel
Stainless Steel Plate, Sheet, and Strip for Pressure
Vessels and for General Applications
ASTM A307-2004e1, Carbon Steel Bolts and Studs,
60,000 psi Tensile Strength
ASTM A320-2007, Alloy/Steel Bolting Materials for
Low-Temperature Service
ASTM A350-2004a, Carbon and Low-Alloy Steel
Forgings, Requiring Notch Toughness Testing for
Piping Components
ASTM A351-2006, Castings, Austenitic, AusteniticFerritic (Duplex), for Pressure Containing Parts
ASTM A352-2006, Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for LowTemperature Service
ASTM A354-2004e1, Quenched and Tempered Alloy
Steel Bolts, Studs, and Other Externally Threaded
Fasteners
ASTM A387-2006a, Pressure Vessel Plates, Alloy Steel,
Chromium-Molybdenum
ASTM A449-2004be1, Hex Cap Screws, Bolts and Studs,
Steel, Heat Treated, 120/105/90 ksi Minimum Tensile
Strength, General Use
ASTM A453-2004e1, High-Temperature Bolting Materials, with Expansion Coefficients Comparable to
Austenitic Stainless Steels
ASTM A515-2003, Pressure Vessel Plates, Carbon Steel,
for Intermediate- and Higher-Temperature Service
ASTM A516-2006, Pressure Vessel Plates, Carbon Steel,
For Moderated- and Lower-Temperature Service
ASME B1.1, Unified Inch Screw Threads (UN and UNR
Thread Form)
ASME B1.20.1, Pipe Threads, General Purpose (Inch)
ASME B16.20, Metallic Gaskets for Pipe Flanges: RingJoint, Spiral-Wound, and Jacketed
ASME B16.21, Nonmetallic Flat Gaskets for Pipe Flanges
ASME B16.25, Buttwelding Ends
ASME B16.34, Valves—Flanged, Threaded, and
Welding End
ASME B18.2.1, Square and Hex Bolts and Screws (Inch
Series)
ASME B18.2.2, Square and Hex Nuts (Inch Series)
ASME PCC-1, Guidelines for Pressure Boundary Bolted
Flange Joint Assembly
ASME B36.l0M, Welded and Seamless Wrought Steel
Pipe
ASME B46.1, Surface Texture (Surface Roughness,
Waviness, and Lay)
Section I, Power Boilers
Section II, Materials
Section III, Rules for Construction of Nuclear Power
Plant Components
Section VIII, Div. 1 and 2, Pressure Vessels
Section IX, Welding and Brazing Qualifications
Publisher: The American Society of Mechanical
Engineers (ASME), Three Park Avenue, New York,
NY 10016-5990; Order Department: 22 Law Drive, P.O.
Box 2900, Fairfield, NJ 07007-2900 (www.asme.org)
ASTM A105-2005, Carbon Steel Forgings for Piping
Applications
ASTM A106-2006a, Seamless Carbon Steel Pipe for
High-Temperature Service
193
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
ASME B16.5-2013
ASTM B473-2007, UNS N08020, UNS N08024, and
UNS N08026 Nickel Alloy Bar and Wire
ASTM B511-2001 (R2005), Nickel-Iron-ChromiumSilicon Alloy Bars and Shapes
ASTM B536-2007, Nickel-Iron-Chromium-Silicon Alloy
(UNS N08330 and N08332) Plate, Sheet, and Strip
ASTM B564-2006a, Nickel Alloy Forgings
ASTM B572-2006, UNS N06002, UNS N06230, UNS
N12160, and UNS R30556 Rod
ASTM B573-2006, Nickel-Molybdenum-Chromium-Iron
Alloy (UNS N10003, N10242) Rod
ASTM B574-2006e1, Low-Carbon Nickel-ChromiumMolybdenum, Low-Carbon Nickel MolybdenumChromium-Tantalum,
Low-Carbon
Nickel
Chromium-Molybdenum-Copper, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM B575-2006, Low-Carbon Nickel-ChromiumMolybdenum, Low-Carbon Nickel-ChromiumMolybdenum-Copper, Low-Carbon NickelChromium-Molybdenum-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy
Plate, Sheet, and Strip
ASTM
B581-2002,
Nickel-Chromium-IronMolybdenum-Copper Alloy Rod
ASTM
B582-2002,
Nickel-Chromium-IronMolybdenum-Copper Alloy Plate, Sheet, and Strip
ASTM B599-1992 (R2003), Nickel-Iron-ChromiumMolybdenum-Columbium
Stabilized
Alloy
(UNS N08700) Plate, Sheet, and Strip
ASTM B620-2003, Nickel-Iron-Chromium-Molybdenum
Alloy (UNS N08320) Plate, Sheet, and Strip
ASTM B621-2002 (R2006), Nickel-Iron-ChromiumMolybdenum Alloy (UNS N08320) Rod
ASTM B625-2005, UNS N08925, UNS N08031, UNS
N08932, UNS N08926, UNS N08354, and UNS R20033
Plate, Sheet, and Strip
ASTM B649-2006, Ni-Fe Cr-Mo-Cu-N Low-Carbon
Alloys (UNS N08925, UNS N08031, UNS N08354, and
UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy
(UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N
Alloy (UNS N08936) Wire
ASTM
B672-2002,
Nickel-Iron-ChromiumMolybdenum-Columbium Stabilized Alloy (UNS
N08700) Bar and Wire
ASTM B688-1996 (R2004), Chromium-NickelMolybdenum-Iron (UNS N08366 and UNS N08367)
Plate, Sheet, and Strip
ASTM E29-2006b, Using Significant Digits in Test Data
to Determine Conformance with Specifications
Publisher: American Society for Testing and Materials
(ASTM International), 100 Barr Harbor Drive, P.O.
Box C700, West Conshohocken, PA 19428-2959
(www.astm.org)
ASTM A537-2006, Pressure Vessel Plates, Heat-Treated,
Carbon-Manganese-Silicon-Steel
ASTM A540-2006, Alloy-Steel Bolting Materials for
Special Applications
ASTM B127-2005, Nickel-Copper Alloy (UNS N04400)
Plate, Sheet, and Strip
ASTM B160-2005, Nickel Rod and Bar
ASTM B162-1999 (R2005), Nickel Plate, Sheet, and Strip
ASTM B164-2003, Nickel-Copper Alloy Rod, Bar, and
Wire
ASTM B166-2006, Nickel-Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045) and Nickel-Chromium-CobaltMolybdenum Alloy (UNS N06617) Rod, Bar, and Wire
ASTM B168-2006, Nickel-Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045) and Nickel-Chronnium-CobaltMolybdenum Alloy (UNS N06617) Plate, Sheet, and
Strip
ASTM B333-2003, Nickel-Molybdenum Alloy Plate,
Sheet, and Strip
ASTM B335-2003, Nickel-Molybdenum Alloy Rod
ASTM B408-2006, Nickel-Iron-Chromium Alloy Rod
and Bar
ASTM B409-2006, Nickel-Iron-Chromium Alloy, Plate,
Sheet, and Strip
ASTM B424-2005, Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825
and N08821) Plate, Sheet, and Strip
ASTM B425-1999 (R2005), Ni-Fe-Cr-Mo-Cu Alloy
(UNS N08825 and UNS N08221) Rod and Bar
ASTM B434-2006, Nickel-Molybdenum-Chromium-Iron
Alloys (UNS N10003, UNS N10242) Plate, Sheet,
and Strip
ASTM B435-2006, UNS N06002, UNS N06230, UNS
N12160, and UNS R30556 Plate, Sheet, and Strip
ASTM B443-2000 (R2005), Nickel-ChromiumMolybdenum-Columbium Alloy (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy
(UNS N06219) Plate, Sheet, and Strip
ASTM B446-2003, Nickel-Chromium-MolybdenumColumbium Alloy (UNS N06625), Nickel-ChromiumMolybdenum-Silicon Alloy (UNS N06219), and
Nickel-Chromium-Molybdenum-Tungsten Alloy
(UNS N06650) Rod and Bar
ASTM B462-2006, Forged or Rolled UNS N06030, UNS
N06022, UNS N06035, UNS N06200, UNS N06059,
UNS N06686, UNS N08020, UNS N08024,
UNS N08026, UNS N08367, UNS N10276,
UNS N10665, UNS N10675, UNS N010629,
UNS N08031, UNS N06045, UNS N06025, and
UNS R20033 Alloy Pipe Flanges, Forged Fittings, and
Valves and Parts for Corrosive High-Temperature
Service
ASTM B463-2004, UNS N08020, UNS N08024, and
UNS N08026 Alloy Plate, Sheet, and Strip
ISO 9000–1:1994, Quality management and quality
assurance standards — Part 1: Guidelines for selection
and use
194
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
ISO 9000–2:1997, Quality management and quality
assurance standard — Part 2: Generic guidelines for
the application of ISO 9001, ISO 9002m, and ISO 9003
ISO 9000–3:1997, Quality management and quality
assurance standards — Part 3: Guidelines for the
application of ISO 9001 to the development, supply,
and maintenance of software
ISO 9001:2000, Quality management systems —
Requirements
ISO 9002:1994, Quality system — Model for quality
assurance in production and servicing
ISO 9003:1994, Quality systems — Model for quality
assurance in final inspection and test
Publisher: 1
International
Organization
for
Standardization (ISO), Central Secretariat, 1, ch. de la
Voie-Creuse, Case postale 56, CH-1211, Genève 20,
Switzerland/Suisse (www.iso.org)
MSS SP-6-2001, Finishes for Contact Faces of Pipe
Flanges and Connecting-End Flanges of Valves and
Fittings
MSS SP-9-2001, Spot Facing for Bronze, Iron, and Steel
Flanges
MSS SP-25-1998, Standard Marking System for Valves,
Fittings, Flanges, and Unions
MSS SP-44-2006, Steel Pipeline Flanges
MSS SP-45-2003, Bypass and Drain Connections
MSS SP-55-2006, Quality Standard for Steel Casting for
Valves, Flanges, and Fittings
MSS SP-61-2003, Pressure Testing of Steel Valves
1
ISO documents are available from the American National
Standards Institute (ANSI), 25 West 43rd Street, New York, NY
10036. Publications appearing above, which have been approved
as American National Standards, may also be obtained from ANSI.
Publisher: Manufacturers Standardization Society of the
Valve and Fittings Industry, Inc. (MSS), 127 Park
Street, NE, Vienna, VA 22180-4602 (www.mss-hq.com)
195
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
NONMANDATORY APPENDIX A
METHOD USED FOR ESTABLISHING
PRESSURE–TEMPERATURE RATINGS
A-1
GENERAL CONSIDERATIONS
where
d p inside diameter of the fitting
Pc p pressure rating class designation or number
(e.g., for Class 150, Pc p 150; for Class 300,
Pc p 300)
SF p stress base constant equal to 7000
t p calculated thickness
A-1.1 Introduction
Pressure–temperature ratings for this Standard have
been determined by the procedures described in this
Nonmandatory Appendix. These procedures are counterpart to those identified as Standard Class in
ASME B16.34. The primary considerations in establishing ratings are component dimensions and material
properties to sustain pressure and other loads.1 Other
considerations affecting or limiting ratings include
(a) stresses in flanges resulting from bolt-up necessary
to maintain a gasket seal
(b) distortion of flanges and flanged fittings due to
loads transmitted through attached piping
(c) limitations applying primarily to flanged components (e.g., valves) but also imposed on flanges in order
to preserve compatible ratings
The resultant units for t will be the same as those
used to express d. Equation (2) results in a fitting wall
thickness 50% greater than that for a simple cylinder
designed for a stress of 48.28 MPa (7,000 psi) when
subjected to an internal pressure equal to the pressure
rating class designation P c . The actual values in the
dimension tables referred to in para. 6.1 are approximately 2.5 mm (0.1 in.) larger than those given by the
equation.
A-1.4 Material Properties
The pressure–temperature rating method uses allowable stress, ultimate tensile strength, and yield strength
values from Section II, Part D of the ASME Boiler and
Pressure Vessel Code. For materials listed herein that
have ratings either at temperature values that are above
those shown in a reference Code Section or that are not
listed in any of the reference Code Sections, the allowable stress, ultimate tensile strength, and yield strength
data have been provided directly by the ASME Boiler
and Pressure Vessel Subcommittee on Materials.
A-1.2 Bolt Cross-Sectional Area
Total flange bolting cross-sectional area requirements
are based on the following relationship:
Ab ≥
PcAg
7000
(1)
where
Ab p total effective bolt tensile stress area
Ag p an area whose circumference is defined by a
diameter equal to the raised face dimension R
in Table 4
Pc p pressure rating class designation or number
(e.g., for Class 150, Pc p 150; for Class 300,
Pc p 300)
A-1.5 Material Groups
Materials are grouped in Table 1A based on identical
or closely matched allowable stress and yield strength
values. When these values are not identical for each
material listed, the lowest value has been used. Note
that material groups in this Standard are not numbered
consecutively. The unlisted numbers, numbers that are
not part of this Standard, may be found in the materials
tables of ASME B16.34.
A-1.3 Flanged Fitting Wall Thickness
Wall thickness requirements for flanged fittings are
specified in para. 6.1. The minimum wall thickness values
tm are shown in the tables designated in para. 6.1. These
values are all greater than those determined by eq. (2).
t p 1.5
冤
冥
P cd
2SF −1.2Pc
A-2 PRESSURE–TEMPERATURE RATING METHOD
A-2.1 Rating Equation Class 300 and Higher
Pressure–temperature ratings for Class 300 and higher
components, of materials listed to those in Table 1A,
were established by the equation
(2)
1
This method is appropriate for materials listed in Table 1A. It
may not be appropriate for other materials.
pt p
C1S1
P ≤ pc
8750 r
196
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(3)
ASME B16.5-2013
(g) Allowable stress values listed in Section II, Part D
of the ASME Boiler and Pressure Vessel Code, for Section
III, Class 2 or Class 3 values may only be used for a
material not listed for either Section I or Section VIII,
Division 1.
where
C1 p 10 when S1 is expressed in MPa units and the
resultant pt will be in bar units (C1 p 1 when
S1 is expressed in psi units and the resultant pt
will be in psi units)
pc p ceiling pressure, bar (psi), at temperature T as
specified in section A-3
Pr p pressure rating class index. For all designations
Class 300 and above, Pr is equal to the class
designation (e.g., for Class 300, Pr p 300). (For
Class 150, see para. A-2.4 of this Nonmandatory
Appendix.)
pt p rated working pressure, bar (psi), for the specified material at temperature T
S1 p selected stress, MPa (psi) for the specified material at temperature T. The value of S1 shall be
established as described in paras. A-2.2, A-2.3,
and A-2.4.
A-2.3 Method for Groups 2 and 3 Materials
Pressure–temperature ratings for Class 300 and
higher, of materials corresponding to those in Materials
Groups 2 and 3 of Table 1A, are established by the
method of paras. A-2.1 and A-2.2, except that in paras.
A-2.2(a)(1) and A-2.2(a)(2), the 60% factor shall be
changed to 70%. For Group 2 materials, the creep range
is considered to be at temperatures in excess of 510°C
(950°F) unless the material properties indicate lower
temperatures should be used. For Group 3 materials,
the creep range onset temperature shall be determined
on an individual basis.
A-2.4 Method for Class 150 — All Materials
Pressure–temperature ratings for Class 150 rating designation are established by the method given for the
related materials in paras. A-2.1, A-2.2, and A-2.3 subject
to the following exceptions:
(a) The value of Pr, the pressure class rating index in
eq. (3) for Class 150, shall be 115.
(b) The value for S1, the selected stress MPa (psi),
for the specific material at temperature T shall be in
accordance with the requirements of either para. A-2.1
or A-2.2, as applicable.
(c) The value of pt, the rated working pressure bar
(psi), for Class 150, shall not exceed values at temperature T as given by eq. (4).
A-2.2 Ratings for Group No. 1 Materials
The selected stress for Group No. 1 materials in
Table 1A is determined as follows:
(a) At temperatures below the creep range, S1 shall
be equal to or less than
(1) 60% of the specified minimum yield strength at
38°C (100°F)
(2) 60% of the yield strength at temperature T
(3) 1.25 times 25% of the ultimate tensile strength
value at temperature T, as listed in Section II, Part D of
the ASME Boiler and Pressure Vessel Code for either
Section I or Section VIII, Division 1
(b) At temperatures in the creep range, the value of
S1 shall be the allowable stress at temperature T, as listed
in Section II, Part D of the ASME Boiler and Pressure
Vessel Code, for either Section I or Section VIII,
Division 1, but not exceeding 60% of the listed yield
strength at temperature.
(c) In no case shall the selected stress value increase
with increasing temperature.
(d) The creep range is considered to be at temperatures in excess of 370°C (700°F) for Group 1 materials.
(e) When the allowable stresses listed for the reference
ASME Boiler and Pressure Vessel Code Section show a
higher and lower value for allowable stress and the
higher value is noted to the effect that these stress values
exceed two-thirds of the yield strength at temperature,
then the lower value shall be used. If lower allowable
stress values do not appear and it is noted in the allowable stress table that the allowable stress values exceed
two-thirds of the yield strength at temperature, then the
allowable stress values used shall be determined as twothirds of the tabulated yield strength at temperature.
(f) Yield strength shall be as listed in Section II, Part D
of the ASME Boiler and Pressure Vessel Code, for either
Section III or Section VIII, Division 2.
pt ≤ C 2 − C 3 T
(4)
where
C2 p 21.41
C3 p 0.03724 with T expressed in °C, the resultant
pt will be in bar units (C2 p 320 and C3 p 0.3,
with T expressed in °F, the resultant pt will be
in psi units)
T p material temperature, °C (°F)
The value of T in eq. (4) shall not exceed 538°C
(1,000°F). For values of T less than 38°C (100°F), use T
equal to 38°C (100°F) in eq. (4).
A-3
MAXIMUM RATINGS
The rules for establishing pressure–temperature ratings include consideration of ceiling pressures pc that
effectively set limits on the selected stress. The ceiling
pressure–temperature values set an upper bound for
high-strength materials and are imposed to limit deflection. Ceiling pressure values are listed in Tables A-1 and
A-2. Ratings in excess of these ceiling values are not
permitted under this Standard.
197
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
(13)
ASME B16.5-2013
Table A-1 Rating Ceiling Pressure — pc , bar
Temperature
°C
Class
150
300
400
600
900
1500
2500
29 to 38
50
100
150
200
20.0
19.5
17.7
15.8
13.8
51.7
51.7
51.5
50.3
48.6
68.9
68.9
68.7
66.8
64.8
103.4
103.4
103.0
100.3
97.2
155.1
155.1
154.6
150.6
145.8
258.6
258.6
257.6
250.8
243.4
430.9
430.9
429.4
418.2
405.4
250
300
325
350
375
12.1
10.2
9.3
8.4
7.4
46.3
42.9
41.4
40.3
38.9
61.7
57.0
55.0
53.6
51.6
92.7
85.7
82.6
80.4
77.6
139.0
128.6
124.0
120.7
116.5
231.8
214.4
206.6
201.1
194.1
386.2
357.1
344.3
335.3
323.2
400
425
450
475
500
6.5
5.5
4.6
3.7
2.8
36.5
35.2
33.7
31.7
28.2
48.9
46.5
45.1
42.3
37.6
73.3
70.0
67.7
63.4
56.5
109.8
105.1
101.4
95.1
84.7
183.1
175.1
169.0
158.2
140.9
304.9
291.6
281.8
263.9
235.0
525
538
550
575
600
1.9
1.4
[Note (1)]
[Note (1)]
[Note (1)]
25.8
25.2
25.0
24.0
21.6
34.4
33.4
33.3
31.9
28.6
51.6
50.0
49.8
47.9
42.9
77.4
75.2
74.8
71.8
64.2
129.0
125.5
124.9
119.7
107.0
214.9
208.9
208.0
199.5
178.5
625
650
675
700
725
[Note
[Note
[Note
[Note
[Note
(1)]
(1)]
(1)]
(1)]
(1)]
18.3
14.1
12.4
10.1
7.9
24.3
18.9
16.9
13.4
10.5
36.6
28.1
25.2
20.0
15.4
54.9
42.5
37.6
29.8
23.2
91.2
70.7
62.7
49.7
38.6
152.0
117.7
104.5
83.0
64.4
750
775
800
816
[Note
[Note
[Note
[Note
(1)]
(1)]
(1)]
(1)]
5.9
4.6
3.5
2.8
7.9
6.2
4.8
3.8
11.7
9.0
7.0
5.9
17.6
13.7
10.5
8.6
29.6
22.8
17.4
14.1
49.1
38.0
29.2
23.8
NOTE:
(1) Ratings for flanges and flanged fittings terminate at 538°C (1,000°F).
198
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table A-2 Rating Ceiling Pressure — pc , psi
Temperature
°F
Class
150
300
400
600
900
1500
2500
20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,000
1,000
970
940
885
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
805
785
755
710
675
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
850
900
950
1,000
1,050
65
50
35
20
[Note (1)]
485
450
385
365
360
650
600
515
485
480
975
900
775
725
720
1,460
1,350
1,160
1,090
1,080
2,435
2,245
1,930
1,820
1,800
4,060
3,745
3,220
3,030
3,000
1,100
1,150
1,200
1,250
[Note
[Note
[Note
[Note
(1)]
(1)]
(1)]
(1)]
325
275
205
180
430
365
275
245
645
550
410
365
965
825
620
545
1,610
1,370
1,030
910
2,685
2,285
1,715
1,515
1,300
1,350
1,400
1,450
1,500
[Note
[Note
[Note
[Note
[Note
(1)]
(1)]
(1)]
(1)]
(1)]
140
105
75
60
40
185
140
100
80
55
275
205
150
115
85
410
310
225
175
125
685
515
380
290
205
1,145
860
630
485
345
NOTE:
(1) Ratings of flanges and flanged fittings terminate at 1,000°F (538°C).
199
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
NONMANDATORY APPENDIX B
LIMITING DIMENSIONS OF GASKETS
OTHER THAN RING JOINT GASKETS
B-1 GASKET MATERIALS AND CONSTRUCTION
dimensions should be based on the type of gasket and
its characteristics. These characteristics include density,
flexibility, compatibility with the fluid being contained,
and gasket compression needed to maintain sealing.
Consideration should be given to the need for a “pocket”
at the gasket inside diameter (between the flange facings) or of intrusion of the gasket into the flange bore.
Consideration should also be given to the effects that
the contained fluid may have upon the gasket, including
damage that may result from partial disintegration of
the gasket material.
Classification of gasket materials and types is shown
in Table B-1. Other gaskets that result in no increase in
bolt loads or flange moment over those resulting from
the gaskets included in the respective groups may be
used (see para. 5.4).
B-2 GASKET DIMENSIONS
Reference to a dimensional standard for gaskets (e.g.,
ASME B16.21) is recommended. In any event, selected
200
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table B-1 Gasket Groups and Typical Materials
Gasket
Group
Number
Ia
Gasket Material
Sketches
Self energizing types:
O rings, metallic, elastomer, other gasket types
considered as self sealing
Elastomer without fabric
Compressed sheet suitable for the operating conditions
Fluoropolymer, elastomer with cotton fabric insertion
Elastomer with or without wire reinforcement
Vegetable fiber
Ib
Spiral wound metal, with nonmetallic filler
Corrugated aluminum, copper or copper alloy, or
corrugated aluminum, copper or copper alloy double
jacketed with nonmetallic filler
Corrugated aluminum, copper, or brass
IIa and IIb
Corrugated metal or corrugated metal double jacketed
with nonmetallic filler
Corrugated metal
Flat metal jacketed with nonmetallic filler
Grooved metal
IIIa and IIIb
Solid flat soft aluminum
Solid flat metal
Ring joint
201
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
NONMANDATORY APPENDIX C
METHOD FOR CALCULATING BOLT LENGTHS1
B p 2(tf + t) + d + G + F + p − a (i.e., machine bolt
length exclusive of negative tolerance, n)
d p heavy nut thickness (equals nominal bolt diameter, see ASME B18.2.2)
F p total height of facings or depth of ring joint
groove for both flanges (see Table C-2)
G p 3.0-mm (0.12 in.) gasket thickness for raised
face, male and female tongue and groove
flanges; also approximate distance between ring
joint flanges listed in Table 5 (Table II-5 of
Mandatory Appendix II)
LCMB p calculated machine bolt length as measured
from underside of head to end of point
LCSB p calculated stud bolt length (effective thread
length, excluding end points)
LSMB p specified machine bolt length (from underside
of head to end, including end point), which is
LCMB rounded off to the nearest 5-mm (0.25 in.)
increment (see Fig. C-1)
LSSB p specified stud bolt length (effective thread
length, excluding end points), which is L CSB
rounded off to the nearest 5-mm (0.25 in.) increment (see Fig. C-2)
n p negative tolerance on bolt length (see Table C-3)
p p allowance for height of point of machine bolt
(1.5 times thread pitch)
t p plus tolerance for flange thickness (see para. 7.4)
tf p minimum flange thickness (see applicable
dimensional tables)
The following equations were used in establishing
dimension L as listed in various dimensional tables:
LCSB p A + n
LCMB p B + n
For lapped joints, calculate stud bolt and machine bolt
length as follows:
(a) For ring joint groove facing
LCSB p A + (pipe thickness for each lap) + n
LCMB p B + (pipe thickness for each lap) + n
(b) For other than ring joint facing
LCSB p A − F + (Table C-1 thicknesses) + n
LCMB p B − F + (Table C-1 thicknesses) + n
where
A p 2(tf + t + d) + G + F − a (i.e., stud bolt length
exclusive of negative length tolerance, n)
a p zero, except where the small female face is on
the end of pipe, a p 5 mm (0.19 in.)
1
The equations used in this Nonmandatory Appendix are for
calculated bolt lengths established to ensure full thread engagement of heavy hexagon nuts when worst case tolerances occur on
all relevant dimensions of the flanged joint. The use of shorter
bolt lengths is acceptable provided that full thread engagement is
obtained at assembly (see para. 6.10.2).
202
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Fig. C-1 Specified Machine Bolt Length
Fig. C-2 Specified Stud Bolt Length
Table C-1 Thickness for Lapped Joints
Lap Combination
For
For
For
For
For
Classes 150 Through 2500 Flanges
lapped to 2 mm (0.06 in.) male face on flange
lapped to lapped
lapped to 7 mm (0.25 in.) male face on flange
lapped to female face on flange
male in lap to female in lap
One lap and 2 mm (0.06 in.)
Both laps
One lap and 7 mm (0.25 in.)
One lap not less than 7 mm (0.25 in.)
2 ⴛ pipe wall with lap for male not less than 7 mm (0.25 in.)
Table C-2 F Values
Total Height of Facings or Depth of Ring Joint Groove for Both Flanges, F, mm (in.)
Type of Flange Facing [Note (1)]
Class
2 mm Raised
0.06 in.
7 mm Raised
0.25 in.
Male and Female
or
Tongue and Groove
Ring Joint
150 and 300
400 to 2500
4 mm (0.12)
4 mm (0.12)
14 mm (0.50)
14 mm (0.50)
7 mm (0.25)
7 mm (0.25)
2 ⴛ groove depth
2 ⴛ groove depth
NOTE:
(1) See Fig. 7 (Fig. II 7 of Mandatory Appendix II) and Tables 4 and 5 (Tables II 4 and II 5 of Mandatory Appendix II).
Table C-3 n Values
Dimensions
Negative Tolerance on Bolt
Lengths, n, mm (in.)
Length, mm (in.)
1.5 (0.06)
3.0 (0.12)
≤305 (≤12)
>305 (>12), ≤460 (≤18)
7.0 (0.25)
>460 (>18)
Stud Bolt
A
or
[A + (pipe thickness for each lap)]
or
[A F + (Table C 1 thickness)]
Machine Bolt
B
or
[B + (pipe thickness for each lap)]
or
[B F + (Table C 1 thickness)]
For n values, use negative length
tolerances per ASME B18.2.1
...
203
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
NONMANDATORY APPENDIX D
QUALITY SYSTEM PROGRAM
The products manufactured in accordance with this
Standard shall be produced under a quality system program following the principles of an appropriate standard from the ISO 9000 series.1 A determination of the
need for registration and/or certification of the product
manufacturer’s quality system program by an independent organization shall be the responsibility of the manufacturer. The detailed documentation demonstrating
program compliance shall be available to the purchaser
at the manufacturer ’s facility. A written summary
description of the program utilized by the product manufacturer shall be available to the purchaser upon
request. The product manufacturer is defined as the
entity whose name or trademark appears on the product
in accordance with the marking or identification requirements of this Standard.
1
The series is also available from the American National
Standards Institute (ANSI) and the American Society for Quality
(ASQ) as American National Standards that are identified by a
prefix “Q,” replacing the prefix “ISO.” Each standard of the series
is listed under References in Mandatory Appendix III.
204
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
NONMANDATORY APPENDIX E
DIMENSIONS OF CLASSES 400, 600, 900, 1500, AND 2500
FLANGED FITTINGS IN U.S. CUSTOMARY UNITS
This Nonmandatory Appendix contains Tables E-1
through E-5.
205
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table E-1
Dimensions of Class 400 Flanged Fittings
AA
HH
A
CC K
K
AA
HH
A
CE
AA
A HH
Elbow
AA
HH
A
A
AA
A HH
EE
LL E
FF
MM
4
5
6
EE L
L
F
45-deg Lateral
Cross
3
E
7
8
9
10
11
Flange
Edge-toFlange
Edge,
Reducer,
G
Center-toContact
Surface of
Raised
Face
Elbow,
Tee, Cross,
and
True “Y,”
AA
Flange Edge
Nominal
Pipe
Size
Outside
Diameter
of Flange,
O
Minimum
Thickness
of Flange,
tf
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter
of Fitting,
d
Center-toFlange
Edge,
Elbow, Tee,
Cross, and
True “Y,”
A
Center-toFlange
Edge,
45-deg
Elbow,
C
Long
Center-toFlange
Edge,
Lateral,
E
Short
Center-toFlange
Edge,
Lateral,
and
True “Y,”
F
3
2
21⁄2
3
31⁄2
13
14
Raised Face 0.25 in. [Note (1)]
1
⁄2
⁄4
1
11⁄4
11⁄2
12
Use Class 600 dimensions in these sizes
Center-toContact
Surface
of Raised
Face,
45-deg
Elbow,
CC
Long
Center-toContact
Surface of
Raised Face,
Lateral,
EE
Short
Center-toContact
Surface of
Raised Face,
Lateral, and
True “Y,”
FF
ASME B16.5-2013
A AA
HH
2
Tee
45-deg Elbow
AA
HH
1
A AA
HH
CE CC
KK
206
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
AA A
HH
1
2
3
4
5
Dimensions of Class 400 Flanged Fittings (Cont’d)
6
7
8
9
10
11
Flange
Edge-toFlange
Edge,
Reducer,
G
Center-toContact
Surface of
Raised
Face
Elbow,
Tee, Cross,
and
True “Y,”
AA
Center-toContact
Surface
of Raised
Face,
45-deg
Elbow,
CC
Long
Center-toContact
Surface of
Raised Face,
Lateral,
EE
Short
Center-toContact
Surface of
Raised Face,
Lateral, and
True “Y,”
FF
Flange Edge
Inside
Diameter
of Fitting,
d
Center-toFlange
Edge,
Elbow, Tee,
Cross, and
True “Y,”
A
12
13
14
Raised Face 0.25 in. [Note (1)]
Center-toFlange
Edge,
45-deg
Elbow,
C
Long
Center-toFlange
Edge,
Lateral,
E
Short
Center-toFlange
Edge,
Lateral,
and
True “Y,”
F
Outside
Diameter
of Flange,
O
Minimum
Thickness
of Flange,
tf
Minimum
Wall
Thickness
of Fitting,
tm
4
5
6
8
10
12
10.00
11.00
12.50
15.00
17.50
20.50
1.38
1.50
1.62
1.88
2.12
2.25
0.38
0.44
0.44
0.56
0.69
0.75
4.00
5.00
6.00
8.00
10.00
12.00
7.75
8.75
9.50
11.50
13.00
14.75
5.25
5.75
6.00
6.50
7.50
8.50
15.75
16.50
18.50
22.00
25.50
29.50
4.25
4.75
5.00
5.50
6.00
6.25
7.75
8.75
9.50
11.50
13.00
14.75
8.00
9.00
9.75
11.75
13.25
15.00
5.50
6.00
6.25
6.75
7.75
8.75
16.00
16.75
18.75
22.25
25.75
29.75
4.50
5.00
5.25
5.75
6.25
6.50
14
16
18
20
24
23.00
25.50
28.00
30.50
36.00
2.38
2.50
2.62
2.75
3.00
0.81
0.88
0.94
1.06
1.19
13.12
15.00
17.00
18.88
22.62
16.00
17.50
19.00
20.50
24.00
9.00
10.00
10.50
11.00
12.50
32.50
36.00
39.00
42.50
50.00
6.75
7.75
8.25
8.75
10.25
16.00
18.00
19.00
20.50
24.00
16.25
17.75
19.25
20.75
24.25
9.25
10.25
10.75
11.25
12.75
32.75
36.25
39.25
42.75
50.25
7.00
8.00
8.50
9.00
10.50
Nominal
Pipe
Size
ASME B16.5-2013
207
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table E-1
G
G
Dimensions of Class 400 Flanged Fittings (Cont’d)
A
HH A
A
FF
MM
d
C
90
deg
Flanged Fitting
True “Y”
W
W
Four bolt holes
S
Round Base
15
Raised Face
0.25 in. [Note (1)]
16
17
18
S
T
S
Square Base
19
20
Ring Joint [Note (1)]
Contact Surface-to- Center-to-End CenterLong
Short
Contact Surface of Elbow, Tee,
to-End,
CenterCenter-toRaised Face
Cross, and
45-deg
to-End, End, Lateral,
Reducer,
True “Y,”
Elbow,
Lateral, and True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)]
[Note (3)] [Note (3)]
[Note (3)]
End-to-End
Reducer,
NN
R
U
T
S
S
Base Elbow
21
22
Diameter
of Round
Base or
Width of
Center-toSquare
Base,
Base,
R
S
[Notes (4)–(6)] [Note (4)]
R
U
Base Tee
23
24
Thickness of
Base,
T
[Notes (4), (7)]
Thickness
of Ribs,
U
[Note (4)]
25
26
1
Base Drilling [Note (8)]
Bolt Circle or Diameter of Nominal
Bolt Spacing,
Drilled
Pipe
W
Holes
Size
1
⁄2
⁄4
1
11⁄4
11⁄2
3
Use Class 600 dimensions in these sizes
2
21⁄2
3
31⁄2
ASME B16.5-2013
W
208
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
t
90 deg
F
Eccentric
Reducer
Reducer
O
A
GG
NN
A
HH A
Table E-1
GG
NN
Table E-1
15
16
17
Raised Face
0.25 in. [Note (1)]
18
Dimensions of Class 400 Flanged Fittings (Cont’d)
19
20
21
Ring Joint [Note (1)]
End-to-End
Reducer,
NN
Diameter
of Round
Base or
Width of
Center-toSquare
Base,
Base,
R
S
[Notes (4)–(6)] [Note (4)]
23
24
Thickness of
Base,
T
[Notes (4), (7)]
Thickness
of Ribs,
U
[Note (4)]
25
26
1
Base Drilling [Note (8)]
Bolt Circle or Diameter of Nominal
Bolt Spacing,
Drilled
Pipe
W
Holes
Size
8.25
9.25
10.00
12.00
13.50
15.25
8.06
9.06
9.81
11.81
13.31
15.06
5.56
6.06
6.31
6.81
7.81
8.81
16.06
16.81
18.81
22.31
25.81
29.81
4.56
5.06
5.31
5.81
6.31
6.56
Notes
Notes
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
(3)
6.00
6.75
7.50
9.00
10.50
12.00
6.50
7.50
7.50
10.00
10.00
12.50
0.88
1.00
1.00
1.25
1.25
1.44
0.62
0.75
0.75
0.88
0.88
1.00
5.00
5.88
5.88
7.88
7.88
10.62
0.75
0.88
0.88
0.88
0.88
0.88
4
5
6
8
10
12
16.50
18.50
19.50
21.00
24.50
16.31
17.81
19.31
20.88
24.44
9.31
10.31
10.81
11.38
12.94
32.81
36.31
39.31
42.88
50.44
7.06
8.06
8.56
9.12
10.69
Notes
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
13.50
14.75
16.25
17.88
20.75
12.50
12.50
15.00
15.00
17.50
1.44
1.44
1.62
1.62
1.88
1.00
1.12
1.12
1.25
1.25
10.62
10.62
13.00
13.00
15.25
0.88
0.88
1.00
1.00
1.12
14
16
18
20
24
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, sea section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -13 of Mandatory Appendix .
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.
(i) For drains, see para. 6.12.
NOTES:
(1) For center-to-contact surface and center-to-end dimensions of reducing fittings, see para. 6.2.3.
(2) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For the center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use centerto-flange edge or flange edge-to-flange edge dimensions for largest opening, and add the proper height to provide for ring joint groove applying to each flange. See Table -5 of
Mandatory Appendix for ring joint facing dimensions.
(3) For contact surface-to-surface and end-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(4) The base dimensions apply to all straight and reducing sizes.
(5) For reducing fittings, the size and center-to-face dimensions of the base are determined by the size of the largest opening of fitting. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(6) Bases shall be plain faced unless otherwise specified, and the center-to-base face dimension R shall be the finished dimension.
(7) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(8) The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
ASME B16.5-2013
209
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Contact Surface-to- Center-to-End CenterLong
Short
Contact Surface of Elbow, Tee,
to-End,
CenterCenter-toRaised Face
Cross, and
45-deg
to-End,
End, Lateral
Reducer,
True “Y,”
Elbow,
Lateral, and True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)]
[Note (3)] [Note (3)]
[Note (3)]
22
Table E-2
AA
HH
A
AA
HH
A
CC K
K
AA
HH
A
Dimensions of Class 600 Flanged Fittings
C
C CC
KK
45-deg Elbow
A
HH A
Elbow
E E
E L
L
2
3
4
A AA
HH
Tee
Cross
GG
NN
G
A
HH A
A
GG
NN
G
90 deg
F
45-deg Lateral
5
A AA
HH
6
7
8
Eccentric
Reducer
Reducer
True “Y”
9
10
11
Flange Edge
Nominal
Pipe Size
1
Outside
Diameter
of Flange,
O
12
13
14
Raised Face 0.25 in. [Note (1)]
Center-toContact
Surface of
Center-toRaised
Minimum
Center-to-Flange Flange Long Center- Short Center-to- Flange EdgeFace,
Minimum
Wall
Inside
Edge, Elbow,
Edge,
to-Flange
Flange Edge,
to-Flange Elbow, Tee,
Thickness Thickness Diameter of Tee, Cross, and 45-deg
Edge,
Lateral, and
Edge,
Cross, and
of Flange, of Fitting,
Fitting,
True “Y,”
Elbow,
Lateral,
True “Y,”
Reducer,
True “Y,”
tm
tm
d
A
C
E
F
G
AA
Center-toContact
Surface of
Raised
Face,
45-deg
Elbow,
CC
Long
Center-toContact
Surface of
Raised
Face,
Lateral,
EE
Short
Center-toContact
Surface of
Raised
Face,
Lateral, and
True “Y,”
FF
⁄2
⁄4
1
11⁄4
11⁄2
3.75
4.62
4.88
5.25
6.12
0.56
0.62
0.69
0.81
0.88
0.16
0.16
0.19
0.19
0.22
0.50
0.75
1.00
1.25
1.50
3.00
3.50
4.00
4.25
4.50
1.75
2.25
2.25
2.50
2.75
5.50
6.50
7.00
7.75
8.75
1.50
1.75
2.00
2.25
2.50
4.50
4.50
4.50
4.50
4.50
3.25
3.75
4.25
4.50
4.75
2.00
2.50
2.50
2.75
3.00
5.75
6.75
7.25
8.00
9.00
1.75
2.00
2.25
2.50
2.75
2
21⁄2
3
31⁄2
4
6.50
7.50
8.25
9.00
10.75
1.00
1.12
1.25
1.38
1.50
0.25
0.28
0.31
0.34
0.38
2.00
2.50
3.00
3.50
4.00
5.50
6.25
6.75
7.25
8.25
4.00
4.25
4.75
5.25
5.75
10.00
11.25
12.50
13.75
16.25
3.25
3.25
3.75
4.25
4.25
5.50
6.25
6.75
7.25
8.25
5.75
6.50
7.00
7.50
8.50
4.25
4.50
5.00
5.50
6.00
10.25
11.50
12.75
14.00
16.50
3.50
3.50
4.00
4.50
4.50
3
ASME B16.5-2013
1
AA
A HH
FF
MM
F
FF
MM
AA
A HH
A
EE E
LL
210
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
AA A
HH
AA
HH
A
1
2
3
4
5
Dimensions of Class 600 Flanged Fittings (Cont’d)
6
7
8
9
10
11
Flange Edge
12
13
14
Raised Face 0.25 in. [Note (1)]
Center-toShort
Contact
Center-toSurface of Center-toLong
Contact
Center-toRaised
Contact
Center-toSurface of
Minimum
Center-to-Flange Flange Long Center- Short Center-to- Flange EdgeFace,
Surface of
Contact
Raised
Outside
Minimum
Wall
Inside
Edge, Elbow,
Edge,
to-Flange
Flange Edge,
to-Flange Elbow, Tee, Raised Face, Surface of
Face,
Diameter Thickness Thickness Diameter of Tee, Cross, and 45-deg
Edge,
Lateral, and
Edge,
Cross, and
45-deg
Raised Face, Lateral, and
Nominal of Flange, of Flange, of Fitting,
Fitting,
True “Y,”
Elbow,
Lateral,
True “Y,”
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
Pipe Size
O
tf
tm
d
A
C
E
F
G
AA
CC
EE
FF
5
6
8
10
12
13.00
14.00
16.50
20.00
22.00
1.75
1.88
2.19
2.50
2.62
0.44
0.50
0.62
0.75
0.91
5.00
6.00
7.88
9.75
11.75
9.75
10.75
12.75
15.25
16.25
6.75
7.25
8.25
9.25
9.75
19.25
20.75
24.25
29.25
31.25
5.75
6.25
6.75
7.75
8.25
9.75
10.75
12.75
15.25
16.25
10.00
11.00
13.00
15.50
16.50
7.00
7.50
8.50
9.50
10.00
19.50
21.00
24.50
29.50
31.50
6.00
6.50
7.00
8.00
8.50
14
16
18
20
24
23.75
27.00
29.25
32.00
37.00
2.75
3.00
3.25
3.50
4.00
0.97
1.09
1.22
1.34
1.59
12.88
14.75
16.50
18.25
22.00
17.25
19.25
21.25
23.25
27.25
10.50
11.50
12.00
12.75
14.50
34.00
38.25
41.75
45.25
52.75
8.75
9.75
10.25
10.75
12.75
17.25
19.25
21.25
23.25
27.25
17.50
19.50
21.50
23.50
27.50
10.75
11.75
12.25
13.00
14.75
34.25
38.50
42.00
45.50
53.00
9.00
10.00
10.50
11.00
13.00
ASME B16.5-2013
211
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table E-2
Table E-2
O
Dimensions of Class 600 Flanged Fittings (Cont’d)
d
tf
S
t
R
U
T
S
S
Base Elbow
16
17
Raised Face
0.25 in. [Note (1)]
18
19
Base Tee
20
21
22
Center-toBase,
R
[Notes
(4)–(6)]
Diameter
of Round
Base or
Width of
Square
Base,
S
[Note (4)]
Thickness of
Base,
T
[Notes (4), (7)]
Thickness
of Ribs,
U
[Note (4)]
Ring Joint [Note (1)]
Contact Surface-to- Center-to-End CenterShort CenterContact Surface of Elbow, Tee,
to-End, Long Centerto-End,
Raised Face
Cross, and
45-deg
to-End
Lateral, and
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)]
[Note (3)]
[Note (3)]
[Note (3)]
R
End-to-End
Reducer,
NN
23
24
25
26
1
Base Drilling [Note (8)]
Bolt Circle
or Bolt
Diameter of Nominal
Spacing,
Drilled
Pipe
W
Holes
Size
1
5.00
5.00
5.00
5.00
5.00
3.22
3.75
4.25
4.50
4.75
1.97
2.50
2.50
2.75
3.00
5.72
6.75
7.25
8.00
9.00
1.72
2.00
2.25
2.50
2.75
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
⁄2
⁄4
1
11⁄4
11⁄2
6.00
6.75
7.25
7.75
8.75
5.81
6.56
7.06
7.56
8.56
4.31
4.56
5.06
5.56
6.06
10.31
11.56
12.81
14.06
16.56
3.56
3.56
4.06
4.56
4.56
Notes
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
4.75
5.25
5.75
6.50
7.00
6.12
6.12
6.50
6.50
7.50
0.81
0.81
0.88
0.88
1.00
0.62
0.62
0.75
0.75
0.75
4.50
4.50
5.00
5.00
5.88
0.88
0.88
0.75
0.75
0.88
2
21⁄2
3
31⁄2
4
3
ASME B16.5-2013
T
15
S
Square Base
Four bolt holes
Round Base
U
212
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
S
Flanged Fitting
15
16
17
Raised Face
0.25 in. [Note (1)]
Table E-2
Dimensions of Class 600 Flanged Fittings (Cont’d)
18
19
20
22
23
24
Center-toBase,
R
[Notes
(4)–(6)]
Diameter
of Round
Base or
Width of
Square
Base,
S
[Note (4)]
Thickness of
Base,
T
[Notes (4), (7)]
Thickness
of Ribs,
U
[Note (4)]
Ring Joint [Note (1)]
Contact Surface-to- Center-to-End CenterShort CenterContact Surface of Elbow, Tee,
to-End, Long Centerto-End,
Raised Face
Cross, and
45-deg
to-End,
Lateral, and
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)]
[Note (3)]
[Note (3)]
[Note (3)]
End-to-End
Reducer,
NN
25
26
1
Base Drilling [Note (8)]
Bolt Circle
or Bolt
Diameter of Nominal
Spacing,
Drilled
Pipe
W
Holes
Size
10.25
11.25
13.25
15.75
16.75
10.06
11.06
13.06
15.56
16.56
7.06
7.56
8.56
9.56
10.06
19.56
21.06
24.56
29.56
31.56
6.06
6.56
7.06
8.06
8.56
Notes
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
8.25
9.00
11.00
12.50
13.25
10.00
10.00
12.50
12.50
15.00
1.25
1.25
1.44
1.44
1.62
0.75
0.75
1.00
1.00
1.12
7.88
7.88
10.62
10.62
13.00
0.88
0.88
0.88
0.88
1.00
5
6
8
10
12
17.75
19.75
21.75
23.75
27.75
17.56
19.56
21.56
23.62
27.69
10.81
11.81
12.31
13.12
14.94
34.31
38.56
42.06
45.62
53.19
9.06
10.06
10.56
11.12
13.19
Notes
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
14.75
16.00
...
...
...
15.00
15.00
...
...
...
1.62
1.62
...
...
...
1.12
1.25
...
...
...
13.00
13.00
...
...
...
1.00
1.00
...
...
...
14
16
18
20
24
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -15 of Mandatory Appendix .
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.
(i) For drains, see para. 6.12.
NOTES:
(1) For center-to-contact surface and center-to-end dimensions of reducing fittings, see para. 6.2.3.
(2) For contact surface-to-contact surface and end-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(3) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For the center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use centerto-flange edge or flange edge-to-flange edge dimensions for largest opening, and add the proper height to provide for ring joint groove applying to each flange. See Table -5 of
Mandatory Appendix for ring joint facing dimensions.
(4) The base dimensions apply to all straight and reducing sizes.
(5) For reducing fittings, the size and center-to-face dimensions of the base are determined by the size of the largest opening of fitting. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(6) Bases shall be plain faced unless otherwise specified, and the center-to-base face dimension R shall be the finished dimension.
(7) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(8) The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
ASME B16.5-2013
213
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
21
Table E-3
Dimensions of Class 900 Flanged Fittings
CC K
K
AA
HH
A
AA
HH
A
AA
HH
A
C
C CC
KK
45-deg Elbow
A
HH A
Elbow
E E
E L
L
2
3
4
45-deg Lateral
6
A AA
HH
Tee
Cross
GG
NN
G
A
HH A
A
7
8
9
10
⁄2
⁄4
1
11⁄4
11⁄2
2
21⁄2
4.75
5.12
5.88
6.25
7.00
8.50
9.62
0.88
1.00
1.12
1.12
1.25
1.50
1.62
0.16
0.19
0.22
0.25
0.28
0.31
0.34
0.50
0.69
0.88
1.12
1.38
1.88
2.25
11
12
13
14
Raised Face 0.25 in. [Note (1)]
Center-to- Center-toShort Center- Flange
Outside
Minimum
Inside Flange Edge,
Flange
Long Centerto-Flange
Edge-toDiameter Minimum
Wall
Diameter Elbow, Tee,
Edge,
to-Flange
Edge,
Flange
Nominal
of
Thickness Thickness
of
Cross, and
45-deg
Edge,
Lateral, and
Edge,
Pipe
Flange, of Flange, of Fitting, Fitting,
True “Y,”
Elbow,
Lateral,
True “Y,”
Reducer,
Size
O
tf
tm
d
A
C
E
F
G
3
Eccentric
Reducer
Reducer
True “Y”
Flange Edge
1
GG
NN
G
90 deg
F
5
A AA
HH
ASME B16.5-2013
1
AA
A HH
FF
MM
F
FF
MM
AA
A HH
A
EE E
LL
214
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
AA A
HH
AA
HH
A
Center-to-Contact
Short CenterSurface of
Center-to-Contact Long Center- to-Contact
Raised Face
Surface of
to-Contact
Surface of
Elbow, Tee,
Raised Face,
Surface of
Raised Face,
Cross, and
45-deg
Raised Face, Lateral, and
True “Y,”
Elbow,
Lateral,
True “Y,”
AA
CC
EE
FF
Use Class 1500 dimensions in these sizes
1
2
3
4
5
6
Dimensions of Class 900 Flanged Fittings (Cont’d)
7
8
9
10
11
Flange Edge
12
13
14
Raised Face 0.25 in. [Note (1)]
3
4
9.50
11.50
1.50
1.75
0.41
0.50
2.88
3.88
7.25
8.75
5.25
6.25
14.25
17.25
4.25
5.25
7.25
8.75
7.50
9.00
5.50
6.50
14.50
17.50
4.50
5.50
5
6
8
10
12
13.75
15.00
18.50
21.50
24.00
2.00
2.19
2.50
2.75
3.12
0.59
0.72
0.88
1.06
1.25
4.75
5.75
7.50
9.38
11.12
10.75
11.75
14.25
16.25
18.75
7.25
7.75
8.75
9.75
10.75
20.75
22.25
27.25
31.25
34.25
6.25
6.25
7.25
8.25
8.75
10.75
11.75
14.25
16.25
17.25
11.00
12.00
14.50
16.50
19.00
7.50
8.00
9.00
10.00
11.00
21.00
22.50
27.50
31.50
34.50
6.50
6.50
7.50
8.50
9.00
14
16
18
20
24
25.25
27.75
31.00
33.75
41.00
3.38
3.50
4.00
4.25
5.50
1.38
1.56
1.75
1.91
2.28
12.25
14.00
15.75
17.50
21.00
20.00
22.00
23.75
25.75
30.25
11.25
12.25
13.00
14.25
17.75
36.25
40.50
45.25
50.00
59.75
9.25
10.25
11.75
12.75
15.25
18.50
20.50
24.00
26.00
30.00
20.25
22.25
24.00
26.00
30.50
11.50
12.50
13.25
14.50
18.00
36.50
40.75
45.50
50.25
60.00
9.50
10.25
12.00
13.00
15.50
ASME B16.5-2013
Center-to-Contact
Short CenterCenter-to- Center-toShort Center- Flange
Surface of
Center-to-Contact Long Center- to-Contact
Outside
Minimum
Inside Flange Edge,
Flange
Long Centerto-Flange
Edge-toRaised Face
Surface of
to-Contact
Surface of
Diameter Minimum
Wall
Diameter Elbow, Tee,
Edge,
to-Flange
Edge,
Flange
Elbow, Tee,
Raised Face,
Surface of
Raised Face,
Nominal
of
Thickness Thickness
of
Cross, and
45-deg
Edge,
Lateral, and
Edge
Cross, and
45-deg
Raised Face, Lateral, and
Pipe
Flange, of Flange, of Fitting, Fitting,
True “Y,”
Elbow,
Lateral,
True “Y,”
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
tm
d
A
C
E
F
G
AA
CC
EE
FF
Size
O
tf
215
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table E-3
Table E-3
O
Dimensions of Class 900 Flanged Fittings (Cont’d)
d
tf
S
t
S
R
U
T
S
S
Base Elbow
16
17
Raised Face
0.25 in. [Note (1)]
18
19
Base Tee
20
21
22
Center-toBase,
S
[Notes (4), (5)]
Diameter
of Round
Base or
Width of
Square
Base,
S
[Note (6)]
Ring Joint [Note (1)]
Contact Surface-to- Center-to-End CenterLong
Short CenterContact Surface of
Elbow, Tee,
to-End,
Centerto-End,
Raised Face
Cross, and
45-deg
to-End,
Lateral, and
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)]
[Note (3)] [Note (3)]
[Note (3)]
R
End-to-End
Reducer,
NN
23
24
25
26
1
Base Drilling [Note (8)]
Thickness of
Base,
T
[Notes (6), (7)]
Thickness
of Ribs,
U
[Note (6)]
Bolt Circle
or Bolt
Diameter of Nominal
Spacing,
Drilled
Pipe
W
Holes
Size
1
⁄2
⁄4
1
11⁄4
3
Use Class 1500 dimensions in these sizes
11⁄2
2
21⁄2
7.75
9.25
7.56
9.06
5.56
6.56
14.56
17.56
4.56
5.56
Notes (2), (3)
Notes (2), (3)
5.75
7.00
6.50
7.50
0.88
1.00
0.75
0.75
5.00
5.88
0.75
0.88
3
4
11.25
12.25
11.06
12.06
7.56
8.06
21.06
22.56
6.56
6.56
Notes (2), (3)
Notes (2), (3)
8.25
9.00
10.00
10.00
1.25
1.25
0.75
0.75
7.88
7.88
0.88
0.88
5
6
ASME B16.5-2013
T
15
S
Square Base
Four bolt holes
Round Base
U
216
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Flanged Fitting
Table E-3
15
16
17
Raised Face
0.25 in. [Note (1)]
18
Dimensions of Class 900 Flanged Fittings (Cont’d)
19
20
22
23
24
End-to-End
Reducer,
NN
Center-toBase,
S
[Notes (4), (5)]
Diameter
of Round
Base or
Width of
Square
Base,
S
[Note (6)]
Thickness of
Base,
T
[Notes (6), (7)]
Thickness
of Ribs,
U
[Note (6)]
Notes (2), (3)
Notes (2), (3)
Notes (2), (3)
11.00
12.50
13.25
12.50
12.50
15.00
1.44
1.44
1.62
1.00
1.00
1.12
10.62
10.62
13.00
0.88
0.88
1.00
8
10
12
Notes
Notes
Notes
Notes
Notes
14.75
16.00
...
...
...
15.00
15.00
...
...
...
1.62
1.62
...
...
...
1.12
1.25
...
...
...
13.00
13.00
...
...
...
1.00
1.00
...
...
...
14
16
18
20
24
Ring Joint [Note (1)]
Contact Surface-to- Center-to-End CenterLong
Short CenterContact Surface of
Elbow, Tee,
to-End,
Centerto-End,
Raised Face
Cross, and
45-deg
to-End,
Lateral, and
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)]
[Note (3)] [Note (3)]
[Note (3)]
14.75
16.75
17.75
14.56
16.56
19.06
9.06
10.06
11.06
27.56
31.56
34.56
7.56
8.56
9.06
19.00
21.00
24.50
26.50
30.50
20.44
22.44
24.25
26.25
30.88
11.69
12.69
13.50
14.75
18.38
36.69
40.94
45.75
50.50
60.38
9.69
10.69
12.25
13.25
15.88
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
25
26
1
Base Drilling [Note (8)]
Bolt Circle
or Bolt
Diameter of Nominal
Spacing,
Drilled
Pipe
W
Holes
Size
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -17 of Mandatory Appendix .
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.
(i) For drains, see para. 6.12.
NOTES:
(1) For center-to-contact surface and center-to-end dimensions of reducing fittings, see para. 6.2.3.
(2) For contact surface-to-contact surface and center-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(3) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For the center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use centerto-flange edge or flange edge-to-flange edge dimensions for largest opening, and add the proper height to provide for ring joint groove applying to each flange. See Table -5 of
Mandatory Appendix for ring joint facing dimensions.
(4) For reducing fittings, the size and center-to-face dimensions of the base are determined by the size of the largest opening fitting. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(5) Bases shall be plain faced unless otherwise specified, and the center-to-base face dimension R shall be the finished dimension.
(6) The base dimensions apply to all straight and reducing sizes.
(7) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(8) The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
ASME B16.5-2013
217
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
21
Table E-4
Dimensions of Class 1500 Flanged Fittings
CC K
K
AA
HH
A
AA
HH
A
AA
HH
A
C
C CC
KK
45-deg Elbow
A
HH A
Elbow
E E
E L
L
2
3
4
6
A AA
HH
A
Cross
GG
NN
G
A
HH A
GG
NN
G
90 deg
F
45-deg Lateral
5
A AA
HH
Reducer
True “Y”
7
8
9
10
Eccentric
Reducer
11
Flange Edge
13
14
Raised Face 0.25 in. [Note (1)]
Center-toShort CenterOutside
Minimum Inside Flange Edge, Center-to- Long Centerto-Flange
Flange Edge
Diameter Minimum
Wall
Diameter Elbow, Tee, Flange Edge,
to-Flange
Edge,
to Flange
Nominal
of
Thickness Thickness
of
Cross, and
45-deg
Edge,
Lateral, and
Edge
Pipe
Flange, of Flange, of Fitting, Fitting,
True “Y,”
Elbow,
Lateral,
True “Y,”
Reducer,
Size
O
tf
tm
d
A
C
E
F
G
1
12
Center-to-Contact Center-toShort CenterSurface of
Contact
Long Center- to-Contact
Raised Face,
Surface of
to-Contact
Surface of
Elbow, Tee,
Raised Face, Surface of Raised Face,
Cross, and
45-deg
Raised Face, Lateral, and
True “Y,”
Elbow,
Lateral,
True “Y,”
AA
CC
EE
FF
⁄2
⁄4
1
11⁄4
4.75
5.12
5.88
6.25
0.88
1.00
1.12
1.12
0.19
0.23
0.26
0.31
0.50
0.69
0.88
1.12
4.00
4.25
4.75
5.25
2.75
3.00
3.25
3.75
...
...
8.75
9.75
...
...
2.25
2.75
...
...
4.50
5.25
4.25
4.50
5.00
5.50
3.00
3.25
3.50
4.00
...
...
9.00
10.00
...
...
2.50
3.00
11⁄2
2
21⁄2
3
4
7.00
8.50
9.62
10.50
12.25
1.25
1.50
1.62
1.88
2.12
0.38
0.44
0.50
0.62
0.75
1.38
1.88
2.25
2.75
3.62
5.75
7.00
8.00
9.00
10.50
4.00
4.50
5.00
5.50
7.00
10.75
13.00
15.00
17.00
19.00
3.25
3.75
4.25
4.75
5.75
5.75
6.75
7.75
8.75
10.25
6.00
7.25
8.25
9.25
10.75
4.25
4.75
5.25
5.75
7.25
11.00
13.25
15.25
17.25
19.25
3.50
4.00
4.50
5.00
6.00
3
ASME B16.5-2013
1
AA
A HH
FF
MM
F
FF
MM
AA
A HH
Tee
A
EE E
LL
218
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
AA A
HH
AA
HH
A
1
2
3
4
5
6
Dimensions of Class 1500 Flanged Fittings (Cont’d)
7
8
9
10
11
Flange Edge
12
13
14
Raised Face 0.25 in. [Note (1)]
Center-to-Contact Center-toShort CenterCenter-toShort CenterSurface of
Contact
Long Center- to-Contact
Outside
Minimum Inside Flange Edge, Center-to- Long Centerto-Flange
Flange Edge
Raised Face,
Surface of
to-Contact
Surface of
Diameter Minimum
Wall
Diameter Elbow, Tee, Flange Edge,
to-Flange
Edge,
to Flange
Elbow, Tee,
Raised Face, Surface of Raised Face,
Nominal
of
Thickness Thickness
of
Cross, and
45-deg
Edge,
Lateral, and
Edge,
Cross, and
45-deg
Raised Face, Lateral, and
Pipe
Flange, of Flange, of Fitting, Fitting,
True “Y,”
Elbow,
Lateral,
True “Y,”
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
tm
d
A
C
E
F
G
AA
CC
EE
FF
Size
O
tf
5
6
8
10
12
14.75
15.50
19.00
23.00
26.50
2.88
3.25
3.62
4.25
4.88
0.91
1.09
1.41
1.72
2.00
4.38
5.38
7.00
8.75
10.38
13.00
13.62
16.12
19.25
22.00
8.50
9.12
10.62
11.75
13.00
23.00
24.62
29.62
35.75
40.50
7.25
7.88
8.88
10.00
11.75
13.25
14.00
16.50
19.75
22.50
13.25
13.88
16.38
19.50
22.25
8.75
9.38
10.88
12.00
13.25
23.25
24.88
29.88
36.00
40.75
7.50
8.12
9.12
10.25
12.00
14
16
18
20
24
29.50
32.50
36.00
38.75
46.00
5.25
5.75
6.38
7.00
8.00
2.19
2.50
2.81
3.12
3.72
11.38
13.00
14.62
16.38
19.62
24.50
27.00
30.00
32.50
38.00
14.00
16.00
17.50
18.50
20.50
43.75
48.00
53.00
57.50
67.00
12.25
14.50
16.25
17.50
20.25
25.25
27.75
31.00
33.50
39.25
24.75
27.25
30.25
32.75
38.75
14.25
16.25
17.75
18.75
20.75
44.00
48.25
53.25
57.75
67.25
12.50
14.75
16.50
17.75
20.50
ASME B16.5-2013
219
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Table E-4
Table E-4
O
Dimensions of Class 1500 Flanged Fittings (Cont’d)
d
tf
S
t
S
R
U
T
S
S
Base Elbow
16
17
Raised Face
0.25 in. [Note (1)]
18
19
R
Base Tee
20
21
22
23
24
25
26
1
Ring Joint [Note (1)]
Center-toContact Surface-to- End Elbow, Center-toShort CenterContact Surface of Tee, Cross,
End,
Long Centerto-End,
Raised Face
and True
45-deg
to-End,
Lateral, and
Reducer,
“Y,”
Elbow,
Lateral,
True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)] [Note (3)]
[Note (3)]
[Note (3)]
End-to-End
Reducer,
NN
Diameter of
Round Base
Center-toor Width of
Base,
Square Base,
R
S
[Notes (4)–(6)]
[Note (4)]
Base Drilling [Note (8)]
Thickness of Thickness Bolt Circle
Base,
of Ribs,
or Bolt
Diameter of Nominal
T
U
Spacing,
Drilled
Pipe
[Notes (4), (7)] [Note (4)]
W
Holes
Size
1
...
...
5.00
5.75
4.25
4.50
5.00
5.50
3.00
3.25
3.50
4.00
...
...
9.00
10.00
...
...
2.50
3.00
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
⁄2
⁄4
1
11⁄4
6.25
7.25
8.25
9.25
10.75
6.00
7.31
8.31
9.31
10.81
4.25
4.81
5.31
5.81
7.31
11.00
13.31
15.31
17.31
19.31
3.50
4.06
4.56
5.06
6.06
Notes
Notes
Notes
Notes
Notes
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
...
5.50
6.00
6.50
7.75
...
6.50
6.50
7.50
10.00
...
0.88
0.88
1.00
1.25
...
0.75
0.75
0.75
0.75
...
5.00
5.00
5.88
7.88
...
0.75
0.75
0.88
0.88
11⁄2
2
21⁄2
3
4
13.75
14.50
17.00
13.31
14.00
16.56
8.81
9.50
11.06
23.31
25.00
30.06
7.56
8.25
9.31
Notes (2), (3)
Notes (2), (3)
Notes (2), (3)
9.00
9.75
11.50
10.00
12.50
12.50
1.25
1.44
1.44
0.75
1.00
1.00
7.88
10.62
10.62
0.88
0.88
0.88
5
6
8
3
ASME B16.5-2013
T
15
S
Square Base
Four bolt holes
Round Base
U
220
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Flanged Fitting
Table E-4
15
16
17
Raised Face
0.25 in. [Note (1)]
18
Dimensions of Class 1500 Flanged Fittings (Cont’d)
19
20
21
22
23
24
25
26
1
Ring Joint [Note (1)]
End-to-End
Reducer,
NN
Diameter of
Round Base
Center-toor Width of
Base,
Square Base,
R
S
[Notes (4)–(6)]
[Note (4)]
Base Drilling [Note (8)]
Thickness of Thickness Bolt Circle
Base,
of Ribs,
or Bolt
Diameter of Nominal
T
U
Spacing,
Drilled
Pipe
[Notes (4), (7)] [Note (4)]
W
Holes
Size
20.25
23.00
19.69
22.56
12.19
13.56
36.19
41.06
10.44
12.31
Notes (2), (3)
Notes (2), (3)
13.75
15.50
15.00
15.00
1.62
1.62
1.12
1.12
13.00
13.00
1.00
1.00
10
12
25.75
28.25
31.50
34.00
39.75
25.12
27.69
30.69
33.19
38.81
14.62
16.69
18.19
19.19
21.31
44.38
48.69
53.69
58.19
67.81
12.88
15.19
16.94
18.19
21.06
Notes
Notes
Notes
Notes
Notes
17.25
18.75
...
...
...
17.50
17.50
...
...
...
1.88
1.88
...
...
...
1.25
1.25
...
...
...
15.25
15.25
...
...
...
1.12
1.12
...
...
...
14
16
18
20
24
(2),
(2),
(2),
(2),
(2),
(3)
(3)
(3)
(3)
(3)
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table -19 of Mandatory Appendix .
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center-to-contact surface, and center-to-end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center-to-contact surface and center-to-end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.
(i) For drains, see para. 6.12.
NOTES:
(1) For center-to-contact surface and center-to-end dimensions of reducing fittings, see para. 6.2.3.
(2) For contact surface-to-contact surface and end-to-end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(3) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For the center-to-end dimensions of reducing fittings or end-to-end dimensions of reducers, use centerto-flange edge or flange edge-to-flange edge dimensions for largest opening, and add the proper height to provide for ring joint groove applying to each flange. See Table -5 of
Mandatory Appendix for ring joint facing dimensions.
(4) The base dimensions apply to all straight and reducing sizes.
(5) For reducing fittings, the size and center-to-face dimensions of the base are determined by the size of the largest opening fitting. n the case of reducing base elbows, orders shall
specify whether the base shall be opposite the larger or smaller opening.
(6) Bases shall be plain faced unless otherwise specified, and the center-to-base dimension R shall be the finished dimension.
(7) Bases may be cast integral or attached as weldments at the option of the manufacturer.
(8) The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
ASME B16.5-2013
221
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Center-toContact Surface-to- End Elbow, Center-toShort CenterContact Surface of Tee, Cross,
End,
Long Centerto-End,
Raised Face
and True
45-deg
to-End
Lateral, and
Reducer,
“Y,”
Elbow,
Lateral,
True “Y,”
GG
HH
KK
LL
MM
[Note (2)]
[Note (3)] [Note (3)]
[Note (3)]
[Note (3)]
ASME B16.5-2013
Table E-5 Dimensions of Class 2500 Flanged Fittings
AA
HH
A
CC K
K
AA
HH
A
CE
AA
A HH
AA A
HH
Elbow
AA
HH
A
A
AA
A HH
A AA
HH
EE
LL E
FF
MM
3
4
E
EE L
L
F
45-deg Lateral
Cross
2
Tee
45-deg Elbow
AA
HH
1
A AA
HH
CE CC
KK
5
6
7
8
9
10
Flange Edge
Minimum
Thickness
of Flange,
tf
Minimum
Wall
Thickness
of Fitting,
tm
Inside
Diameter
of
Fitting,
d
Center-toFlange Edge,
Elbow, Tee,
Cross, and
True “Y,”
A
Center-toFlange Edge,
45-deg
Elbow,
CE
Long Centerto-Flange
Edge,
Lateral,
E
Short Centerto-Flange
Edge,
Lateral, and
True “Y,”
F
Flange
Edge-toFlange
Edge,
Reducer,
G
5.25
5.50
6.25
7.25
8.00
1.19
1.25
1.38
1.50
1.75
0.25
0.28
0.34
0.44
0.50
0.44
0.56
0.75
1.00
1.12
4.94
5.12
5.81
6.62
7.31
...
...
3.75
4.00
4.50
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
2
21⁄2
3
4
9.25
10.50
12.00
14.00
2.00
2.25
2.62
3.00
0.62
0.75
0.88
1.09
1.50
1.88
2.25
2.88
8.62
9.75
11.12
13.00
5.50
6.00
7.00
8.25
15.00
17.00
19.50
22.75
5.00
5.50
6.50
7.50
9.00
10.00
11.25
13.00
5
6
8
10
12
16.50
19.00
21.75
26.50
30.00
3.62
4.25
5.00
6.50
7.25
1.34
1.59
2.06
2.59
3.03
3.62
4.38
5.75
7.25
8.62
15.38
17.75
19.88
24.75
27.75
9.75
11.25
12.50
15.75
17.50
27.00
31.00
35.00
43.00
49.00
9.00
10.25
11.50
14.50
16.00
15.25
17.50
20.00
25.00
28.50
Outside
Diameter
of
Flange,
O
⁄2
⁄4
1
11⁄4
11⁄2
Nominal
Pipe Size
1
3
222
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
Table E-5 Dimensions of Class 2500 Flanged Fittings (Cont’d)
A
HH A
A
A
d
GG
NN
G
A
HH A
O
GG
NN
G
tf
FF
MM
t
Flanged Fitting
11
12
13
14
15
16
17
Raised Face 0.25 in. [Note (1)]
Short
Contact
CenterSurfaceCenterLong
totoCenter-totoCenterContact
Contact
Contact
Contact
toSurface
Surface
Surface of
Surface
Contact of Raised
of
Raised Face of Raised Surface
Face
Raised
Elbow, Tee,
Face
of Raised Lateral
Face
Cross, and
45-deg
Face
and
Reducer,
True “Y,”
Elbow,
Lateral,
True “Y,”
GG
AA
CC
EE
FF
[Note (2)]
True “Y”
Eccentric Reducer
Reducer
90 deg
F
18
19
20
1
Nominal
Pipe
Size
Ring Joint [Note (1)]
Center-toEnd, Elbow,
Tee, Cross,
and True
“Y,”
HH
[Note (3)]
Center-toEnd, 45-deg
Elbow,
KK
[Note (3)]
Long Centerto-End
Lateral,
LL
[Note (3)]
Short Centerto-End
Lateral and
True “Y,”
MM
[Note (3)]
End-toEnd
Reducer,
NN
[Notes
(2), (3)]
1
5.19
5.37
6.06
6.87
7.56
...
...
4.00
4.25
4.75
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
5.19
5.19
6.06
6.94
7.62
...
...
4.00
4.31
4.81
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
⁄2
⁄4
1
11⁄4
11⁄2
8.87
10.00
11.37
13.25
5.75
6.25
7.25
8.50
15.25
17.25
19.75
23.00
5.25
5.75
6.75
7.75
9.50
10.50
11.75
13.50
8.94
10.12
11.50
13.44
5.81
6.38
7.38
8.69
15.31
17.38
19.88
23.19
5.31
5.88
6.88
7.94
...
...
...
...
2
21⁄2
3
4
15.62
18.00
20.12
25.00
28.00
10.00
11.50
12.75
16.00
17.75
27.25
31.25
35.25
43.25
49.25
9.25
10.50
11.75
14.75
16.25
15.75
18.00
20.50
25.50
29.00
15.88
18.25
20.44
25.44
28.44
10.25
11.75
13.06
16.44
18.19
27.50
31.50
35.56
43.69
49.69
9.50
10.75
12.06
15.19
16.62
...
...
...
...
...
5
6
8
10
12
3
GENERAL NOTES:
(a) Dimensions are in inches.
(b) For tolerances, see section 7.
(c) For facings, see para. 6.4.
(d) For flange bolt holes, see para. 6.5 and Table II 21 of Mandatory Appendix II.
(e) For spot facing, see para. 6.6.
(f) For intersecting centerlines, center to contact surface, and center to end dimensions of side outlet fittings, see para. 6.2.4.
(g) For center to contact surface and center to end dimensions of special degree elbows, see para. 6.2.5.
(h) For reinforcement of certain fittings, see para. 6.1.
(i) For drains, see para. 6.12.
NOTES:
(1) For center to contact surface and center to end dimensions of reducing fittings, see para. 6.2.3.
(2) For contact surface to contact surface and end to end dimensions of reducers and eccentric reducers, see para. 6.2.3.
(3) These dimensions apply to straight sizes only (see paras. 6.2.3 and 6.4.2.2). For the center to end dimensions of reducing fittings or
end to end dimensions of reducers, use center to flange edge or flange edge to flange edge dimensions for largest opening, and add
the proper height to provide for ring joint groove applying to each flange. See Table II 5 of Mandatory Appendix II for ring joint facing
dimensions.
223
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
INTENTIONALLY LEFT BLANK
224
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
Copyright c 2013 by the American Society of Mechanical Engineers.
No reproduction may be made of this material without written consent of ASME.
ASME B16.5-2013
M01513
Academia.edu no longer supports Internet Explorer.
To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to upgrade your browser.
Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard
By Mirza Baig
...Read more
Related Papers
Download
Download
Download
О скульптурном декоре Мангупской базилики., 2023
Download
Download
Editorial Universidad del Norte, Friedrich-Ebert-Stiftung (FES), 2024
Download
