A series of nanocrystalline Fe–C alloys with different carbon concentrations (xtot) up to 19.4 at.% (4.90 wt.%) are prepared by ball milling. The microstructures of these alloys are characterized by transmission electron microscopy and... more
A series of nanocrystalline Fe–C alloys with different carbon concentrations (xtot) up to 19.4 at.% (4.90 wt.%) are prepared by ball milling. The microstructures of these alloys are characterized by transmission electron microscopy and X-ray diffraction, and partitioning of carbon between grain boundaries and grain interiors is determined by atom probe tomography. It is found that the segregation of carbon to grain boundaries of a-ferrite can significantly reduce its grain size to a few nanometers. When the grain boundaries of ferrite are saturated with carbon, a metastable thermodynamic equilibrium between the matrix and the grain boundaries is approached, inducing a decreasing grain size with increasing xtot. Eventually the size reaches a lower limit of about 6 nm in alloys with xtot > 6.19 at.% (1.40 wt.%); a further increase in xtot leads to the precipitation of carbon as Fe3C. The observed presence of an amorphous structure in 19.4 at.% C (4.90 wt.%) alloy is ascribed to a deformation-driven amorphization of Fe3C by severe plastic deformation. By measuring the temperature dependence of the grain size for an alloy with 1.77 at.% C additional evidence is provided for a metastable equilibrium reached in the nanocrystalline alloy.
