About
All feedback (63)
rc-express (220538)- Feedback left by buyer.
Past 6 months
Verified purchase
Valued RC Express Customer!!! Thank You!!!!!
mr-retro (319088)- Feedback left by buyer.
Past year
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
rc-express (220538)- Feedback left by buyer.
Past 6 months
Verified purchase
Hope to do business again soon!!! RC Express.com Thanks you!
ceramic_lady (3320)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
rcmart (355419)- Feedback left by buyer.
Past 6 months
Verified purchase
Great communication. A pleasure to do business with.
ewippler (9044)- Feedback left by buyer.
Past 6 months
Verified purchase
Hope to deal with you again. Thank you.
Reviews (7)
Aug 23, 2019
Fine tune your settings easier!
be careful on the firmware update I had to exit my house to get it to upload correctly. if your too close to the wifi router it wont update.
works great for fine tuning settings or changing servo directions.
Aug 23, 2019
Cheap and Effective!
So, your Daisy Chaining all your Servos to get the lighting features, I recommend some good long servo extension wires. and an improvised quick disconnect socket, or you won't get the body off very easily to work on the car or change the battery. Other than that.. it works great!
Take Note: the only 3mm LED's are the turn signals that are amber, and the fog lamps are blue and always on like running lights.
I suggest looking for alternative LED configurations online to make it more specific to your application. and check the wires prior to install to make sure the right LED's are plugged in.
my reverse lights and brake lights were switched, but you can not beat the price.
May 15, 2024
Was not quite what I thought it was. The shoulder screws are installed using a Tamiya box wrench. Not a hex driver as I originally thought. To cut int
Was not quite what I thought it was. The shoulder screws are installed using a Tamiya box wrench. Not a hex driver as I originally thought. To cut into plastic it’s a little hard to get started my other drivers were too deep and could not press it in to start the threads being cut. But ultimately better than a Philips head screw as the Tamiya kits come with.. a 5 star products just difficult to start the threads on.