The Giza Power Plant Quotes

“We cannot fathom technology that is unknown to us, and we seldom consider things that seem impossible to us.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“For those who may still believe in the "official" chronology of the historical development of metals, identifying copper as the metal the ancient Egyptians used for cutting granite is like saying that aluminum could be cut using a chisel fashioned out of butter.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“As electrical energy can create mechanical vibrations (perceived as sound by the human ear), so in turn can mechanical vibrations create electrical energy, such as the previously mentioned ball lightning. It could be theorized, therefore, that with the Earth being a source for mechanical vibration, or sound, and the vibrations being of a usable amplitude and frequency, then the Earth's vibrations could be a source of energy that we could tap into. Moreover, if we were to discover that a structure with a certain shape, such as a pyramid, was able to effectively act as a resonator for the vibrations coming from within the Earth, then we would have a reliable and inexpensive source of energy.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“I was hoping to be able to get into the Queen's Chamber while I was in Egypt in 1986 to get a sample of the salt for analysis. I had speculated that the salt on the walls of the chamber was an unwanted, though significant, residual substance caused by a chemical reaction where hot hydrogen reacted with the limestone. Unfortunately, I was unable to get into the chamber because a French team was already inside the Horizontal Passage, boring holes into what they hoped were additional chambers. (It was discovered, after I left Egypt, that the spaces contained only sand.)
As it turned out, my research would have been redundant. Noone reported in his book that another individual had already had the same idea and done the work. In 1978, Dr. Patrick Flanagan asked the Arizona Bureau of Geology and Mineral Technology to analyze a sample of this salt. They found it to be a mixture of calcium carbonate (limestone), sodium chloride (halite or salt), and calcium sulfate (gypsum, also known as plaster of paris). These are precisely the minerals that would be produced by the reaction of hot, hydrogen-bearing gas with the limestone walls and ceiling of the Queen's Chamber.
[...]
The interior chambers of the Great Pyramid have the appearance of being subjected to extreme temperatures; and [...] the broken corner on the granite box shows signs of being melted, rather than simply being chipped away.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Subsequent experiments conducted by Tom Danley in the King's Chamber of the Great Pyramid and in Chambers above the King's Chamber suggest that the pyramid was constructed with a sonic purpose. Danley identifies four resident frequencies, or notes, that are enhanced by the structure of the pyramid, and by the materials used in its construction.
The notes form an F Sharp chord, which according to ancient Egyptian texts were the harmonic of our planet. Moreover, Danley's tests show that these frequencies are present in the King's Chamber even when no sounds are being produced. They are there in frequencies that range from 16 Hertz down to 1/2 Hertz, well below the range of human hearing. According to Danley, these vibrations are caused by the wind blowing across the ends of the so-called shafts—in the same way as sounds are created when one blows across the top of a bottle.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“While infrasonic vibrations at around 6 hertz may influence the brain and produce various effects in humans, it seems that there must be other types of energy, or other frequencies, to explain phenomena that were noted to have occurred at the Great Pyramid more than one hundred years ago. Sir William Siemens, an Anglo-German engineer, metallurgist, and inventor, experienced a strange energy phenomenon at the Great Pyramid when an Arab guide called his attention to the fact that, while standing on the summit of the pyramid with hands outstretched, he could hear a sharp ringing noise. Raising his index finger, Siemens felt a prickling sensation.
Later on, while drinking out of a wine bottle he had brought along, he experienced a slight electric shock. Feeling that some further observations were in order, Siemens then wrapped a moistened newspaper around the bottle, converting it into a Leyden jar. After he held it above his head for a while, this improvised Leyden jar became charged with electricity to such an extent that sparks began to fly. Reportedly, Siemens' Arab guides were not too happy with their tourist's experiment and accused him of practicing witchcraft. Peter Tompkins wrote, "One of the guides tried to seize Siemens' companion, but Siemens lowered the bottle towards him and gave the Arab such a jolt that he was knocked senseless to the ground. Recovering, the guide scrambled to his feet and took off down the Pyramid, crying loudly.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Energy is the basis of creating electricity that we can utilize, so how can we harness the power of an earthquake? Obviously, today, if that much energy were being drawn from the Earth through the Great Pyramid, tourists would not be parading through it every day. In order for the system to work, the pyramid would need to be mechanically coupled with the Earth and vibrating in sympathy with it. To do this, the system would need to be "primed"—we would need to initiate oscillation of the pyramid before we could tap into the Earth's oscillations. After the initial priming pulse, though, the pyramid would be coupled with the Earth and could draw off its energy. In effect, the Great Pyramid would feed into the Earth a little energy and receive an enormous amount out of it in return.
How do we cause a mass of stone that weighs 5,273,834 tons to oscillate? It would seem an impossible task. Yet there was a man in recent history who claimed he could do just that! Nikola Tesla, a physicist and inventor with more than six hundred patents to his credit—one of them being the AC generator—created a device he called an "earthquake machine." By applying vibration at the resonant frequency of a building, he claimed he could shake the building apart. In fact, it is reported that he had to turn his machine off before the building he was testing it in came down around him.
[...]
The New York World-Telegram reported Tesla's comments from a news briefing at the hotel New Yorker on July 11, 1935: 'I was experimenting with vibrations. I had one of my machines going and I wanted to see if I could get it in tune with the vibration of the building. I put it up notch after notch. There was a peculiar cracking sound. I asked my assistants where did the sound come from. They did not know. I put the machine up a few more notches. There was a louder cracking sound. I knew I was approaching the vibration of the steel building. I pushed the machine a little higher. Suddenly, all the heavy machinery in the place was flying around. I grabbed a hammer and broke the machine. The building would have been about our ears in another few minutes. Outside in the street there was pandemonium. The police and ambulances arrived. I told my assistants to say nothing. We told the police it must have been an earthquake. That's all they ever knew about it.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The granite complex inside the Great Pyramid, therefore, is poised ready to convert vibrations from the Earth into electricity. What is lacking is a sufficient amount of energy to drive the beams and activate the piezoelectric properties within them. The ancients, though, had anticipated the need for more energy than what would be collected only within the King's Chamber. They had determined that they needed to tap into the vibrations of the Earth over a larger area inside the pyramid and deliver that energy to the power center—the King's Chamber —thereby substantially increasing the amplitude of the oscillations of the granite.
Modern concert halls are designed and built to interact with the instruments performing within. They are huge musical instruments in themselves. The Great Pyramid can be seen as a huge musical instrument with each element designed to enhance the performance of the other. While modern research into architectural acoustics might focus predominantly upon minimizing the reverberation effects of sound in enclosed spaces, there is reason to believe that the ancient pyramid builders were attempting to achieve the opposite. The Grand Gallery, which is considered to be an architectural masterpiece, is an enclosed space in which resonators were installed in the slots along the ledge that runs the length of the gallery. As the Earth's vibration flowed through the Great Pyramid, the resonators converted the vibrational energy to airborne sound. By design, the angles and surfaces of the Grand Gallery walls and ceiling caused reflection of the sound, and its focus into the King's Chamber. Although the King's Chamber also was responding to the energy flowing through the pyramid, much of the energy would flow past it. The specific design and utility of the Grand Gallery was to transfer the energy flowing through a large area of the pyramid into the resonant King's Chamber. This sound was then focused into the granite resonating cavity at sufficient amplitude to drive the granite ceiling beams to oscillation. These beams, in turn, compelled the beams above them to resonate in harmonic sympathy. Thus, with the input of sound and the maximization of resonance, the entire granite complex, in effect, became a vibrating mass of energy.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Modern electrical power distribution technology is largely the fruit of the labors of two men—Thomas Edison and Nikola Tesla. Compared with Edison, Tesla is relatively unknown, yet he invented the alternating electric current generation and distribution system that supplanted Edison's direct current technology and that is the system currently in use today. Tesla also had a vision of delivering electricity to the world that was revolutionary and unique. If his research had come to fruition, the technological landscape would be entirely different than it is today. Power lines and the insulated towers that carry them over thousands of country and city miles would not distract our view. Tesla believed that by using the electrical potential of the Earth, it would be possible to transmit electricity through the Earth and the atmosphere without using wires. With suitable receiving devices, the electricity could be used in remote parts of the planet. Along with the transmission of electricity, Tesla proposed a system of global communication, following an inspired realization that, to electricity, the Earth was nothing more than a small, round metal ball.
[...]
With $150,000 in financial support from J. Pierpont Morgan and other backers, Tesla built a radio transmission tower at Wardenclyffe, Long Island, that promised—along with other less widely popular benefits—to provide communication to people in the far corners of the world who needed no more than a handheld receiver to utilize it.
In 1900, Italian scientist Guglielmo Marconi successfully transmitted the letter "S" from Cornwall, England, to Newfoundland and precluded Tesla's dream of commercial success for transatlantic communication. Because Marconi's equipment was less costly than Tesla's Wardenclyffe tower facility, J. P. Morgan withdrew his support. Moreover, Morgan was not impressed with Tesla's pleas for continuing the research on the wireless transmission of electrical power. Perhaps he and other investors withdrew their support because they were already reaping financial returns from those power systems both in place and under development. After all, it would not have been possible to put a meter on Tesla's technology—so any investor could not charge for the electricity!”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The evidence presented in this book, for the most part, was recorded many years ago by men of integrity who worked in the fields of archaeology and Egyptology. That much of this evidence was misunderstood only reveals the pressing need for an interdisciplinary approach to fields that have until recently been closed to nonacademics and others outside the fold of formal archaeology and Egyptology. Much of our ignorance of ancient cultures can be placed at the feet of closed-minded theorists who ignore evidence that does not fit their theories or fall within the province of their expertise. Sometimes it takes a machinist to recognize machined parts or machines! As a result, much of the evidence that supports a purpose for the Great Pyramid as anything other than a tomb has been ignored, discounted without serious consideration, or simply explained away as purely coincidental. Is it coincidence that the Great Pyramid is so huge and so precise? That the King's Chamber contains so many indications that tremendous forces disturbed it or were created within it at one time? Are the exuviae, the chocolate-colored granite, the resonating chambers with their giant granite monoliths placed above, and the unique properties of the quartz crystal present in vast quantities in the granite complex all coincidental? Can the design and physical tests of the movement of sound inside the Grand Gallery be just a happy accident?”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The precision in these artifacts is irrefutable. Even if we ignore the question of how they were produced, we are still faced with the question of why such precision was needed. Revelation of new data invariably raises new questions. In this case it is understandable for skeptics to ask, "Where are the machines?" But machines are tools, and the question should be applied universally and can be asked of anyone who believes other methods may have been used. The truth is that no tools have been found to explain any theory on how the pyramids were built or the granite boxes were cut. More than eighty pyramids have been discovered in Egypt, and the tools that built them have never been found. Even if we accepted the notion that copper tools are capable of producing these incredible artifacts, the few copper implements that have been uncovered do not represent the number of such tools that would have been used if every stonemason who is supposed to have worked on the pyramids at just the Giza site owned one or two. In the Great Pyramid alone there are an estimated 2,300,000 blocks of stone, both limestone and granite, weighing between two-and-one-half tons and seventy tons each. That is a mountain of evidence, and there are no tools surviving to explain even this one pyramid's creation.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Smyth is credited for noting another anomaly in the Queen's Chamber—there were flakes of white mortar exuding from stone joints inside the shaft. Analysis of the mortar found it to be plaster of paris—gypsum (calcium sulfate). Smyth also described this chamber as having a foul odor, which caused early visitors to the chamber to beat a hasty retreat, and it was assumed that tourists were relieving themselves, though the way Smyth described this chamber, few people stayed long enough to do so. However, as I will make clear, this odor may not have been the result of unhygienic conditions but of the chemical process that once occurred in the Queen's Chamber.
One of the greatest mysteries of this chamber has been the salt encrustation on the walls. It was up to one-half-inch thick in places, and Petrie took it into account when he made measurements of the chamber. The salt also was found along the Horizontal Passage and in the lower portion of the Grand Gallery. How did salt come to build up on the walls?”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Steiger presented another analysis by a professional engineer, who saw the wall carvings at Dendera as an accurate illustration of an electrical device—one which would not be out of place in a modern electrical blueprint file. "In regards to the ancient Egyptian electron tubes, electromagnetic engineer Professor S.R. Harris identified a box-and braided cable in the picture as 'virtually an exact copy of engineering illustration used today for representing a bundle of conducting wires.' The cable runs from the box the full length of the floor and terminates at both the ends and at the bases of two peculiar objects resting on two pillars. Professor Harris is said to have identified these representations as high voltage insulators.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“When Willard F. Libby first discovered radiocarbon dating in 1947, archaeologists, and especially Egyptologists, ignored it. They questioned its reliability, as it did not coincide with the "known" historical dates of the artifacts being tested. David Wilson, author of The New Archaeology, wrote, "Some archaeologists refused to accept radiocarbon dating. The attitude of the majority, probably, in the early days of the new technique was summed up by Professor Jo Brew, Director of the Peabody Museum at Harvard. 'If a C14 date supports our theories, we put it in the main text. If it does not entirely contradict them, we put it in a footnote. And if it is completely out-of-date we just drop it.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Here is the product of an ancient civilization empowered with the knowledge that as long as the moon continued to orbit the Earth, the special relationship that existed between the two assured the Egyptians of vast amounts of energy. The source of the energy is the Earth itself, in the form of seismic energy. The ancient Egyptians saw tremendous value in this form of energy and expended a considerable amount of effort to tap into it. The benefits they received may have been twofold: energy to fuel their civilization, and the ability to stabilize the Earth's crust by drawing off seismic energy over a period of time rather than allowing it to build up to destructive levels.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“When we study the past seeking evidence of a highly advanced culture, we should not expect to find objects that we associate with our own culture. Different cultures develop along different paths. This process occurs even over relatively short periods of time, especially when one society is isolated from others. For example, when the Allies went into Germany after Hitler's defeat, they found that after only twelve years of isolation German technology was being developed along lines vastly different from our own. Pauwels and Bergier wrote:
'When the War in Europe ended on May 8th, 1945, missions of investigation were immediately sent out to visit Germany after her defeat. Their reports have been published; the catalogue alone has 300 pages. Germany had only been separated from the world since 1933. In twelve years the technical evolution of the Reich developed along strangely divergent lines. Although the Germans were behindhand as regards the atomic bomb, they had perfected giant rockets unmatched by any in America or Russia. They may not have had radar, but they had perfected a system of infra-red ray detectors which were quite as effective. Though they did not invent silicones, they had developed an entirely new organic chemistry, based on the eight-ring carbon chain. [...] They had rejected the theory of relativity and tended to neglect the quantum theory. [...] They believed in the existence of eternal ice and that the planets and the stars were blocks of ice floating in space. If it has been possible for such wide divergencies to develop in the space of twelve years in our modern world, in spite of the exchange of ideas and mass communications, what view must one take of the civilizations of the past? To what extent are our archaeologists qualified to judge the state of the sciences, techniques, philosophy and knowledge that distinguished, say, the Maya or Khmer civilizations?”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“In order to draw mechanical vibrations and relieve the stresses that build up within the Earth, we would need an object that would respond sympathetically with the Earth's fundamental frequency. This object would need to be designed in such a way that its own resonant frequency was the same as, or a harmonic of, the Earth's. In this manner, energy transfer from the source would be at maximum load. In harmony with the Earth's vibrations, this object would have the potential to become a coupled oscillator. (A coupled oscillator is an object that is in harmonic resonance with another, usually larger, vibrating object. When set into motion, the coupled oscillator will draw energy from the source and vibrate in sympathy as long as the source continues to vibrate.)
Because the Earth constantly generates a broad spectrum of vibration, we could utilize vibration as a source of energy if we developed suitable technology. Naturally, any device that attracted greater amounts of this energy than is normally being radiated from the Earth would greatly improve the efficiency of the equipment. Because energy will inherently follow the path of least resistance, it follows that any device offering less resistance to this energy than the surrounding medium through which it passes would have a greater amount of energy channeled through it. Keeping all of this in mind and knowing that the Great Pyramid is a mathematical integer of the Earth, it may not be so outlandish to propose that the pyramid is capable of vibrating at a harmonic frequency of the Earth's fundamental frequency.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The knowledge needed to evaluate certain of these ancient artifacts was not available until very recently. Even today there may be numerous articles that we will not understand until we further develop our own technology. We cannot fathom technology that is unknown to us, and we seldom consider things that seem impossible to us. Petrie, though knowledgeable in engineering and surveying, could not be expected to know anything about ultrasonic machining; hence his amazement at the machining abilities of the ancient Egyptians. Even if he had been aware of this technology, the intellectual climate of his time may have precluded his considering the possibility that these methods were known to the ancient Egyptians. Quite simply, the greatest barrier to our understanding may not necessarily be knowledge. It may be attitude.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Not-withstanding the fact that cutting granite with copper chisels is an impossibility, Egyptologists have asserted that the pyramid builders predated the Bronze Age, and, therefore, were limited in their choice of metals with which to make their tools. Therefore, they say that copper was the only metal that the ancient Egyptians used to fashion the stones with which they built the Great Pyramid. They say this while evidence of prehistoric iron—proving that the ancient Egyptians had developed and used it when building the Great Pyramid—is in the keeping of the British Museum. The discoverers of this piece of iron go to great lengths to argue for and document its authenticity, as John and Morton Edgar point out in their book Great Pyramid Passages.
[…]
Despite the [...] testimonials, because the chronology for the development of metals did not include wrought iron in the age of the pyramids, the specialists at the British Museum concluded that this wrought-iron artifact could not be genuine and must have been introduced in modern times.
[…]
The profession as a whole has been unable to cope with the idea of a piece of wrought iron being contemporary with the Great Pyramid. Such a notion goes completely against the grain of every preconception that Egyptologists internalize throughout their careers concerning the ways in which civilizations evolve and develop.
[…]
Egyptologists have a vested interest in continuing their teachings as they have taught them for the past century. To do otherwise would be to admit that they have been wrong. The iron plate is just a small, though significant, item in a large collection of anomalies that have been ignored or misinterpreted by many academics because they contradict their orthodox beliefs.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“With such a convincing collection of artifacts that prove the existence of precision machinery in ancient Egypt, the idea that the Great Pyramid was built by an advanced civilization that inhabited the Earth thousands of years ago becomes more admissible. I am not proposing that this civilization was more advanced technologically than ours on all levels, but it does appear that as far as masonry work and construction are concerned they were exceeding current capabilities and specifications.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Ultrasonic drilling fully explains how the holes and cores found in the Valley Temple at Giza could have been cut, and it is capable of creating all the details that Petrie and I puzzled over. Unfortunately for Petrie, ultrasonic drilling was unknown at the time he made his studies, so it is not surprising that he could not find satisfactory answers to his queries. In my opinion, the application of ultrasonic machining is the only method that completely satisfies logic, from a technical viewpoint, and explains all noted phenomena.
[...]
The most significant detail of the drilled holes and cores studied by Petrie was that the groove was cut deeper through the quartz than through the feldspar. Quartz crystals are employed in the production of ultrasonic sound and, conversely, are responsive to the influence of vibration in the ultrasonic ranges and can be induced to vibrate at high frequency. When machining granite using ultrasonics, the harder material (quartz) would not necessarily offer more resistance, as it would during conventional machining practices. An ultrasonically vibrating tool bit would find numerous sympathetic partners, while cutting through granite, embedded right in the granite itself. Instead of resisting the cutting action, the quartz would be induced to respond and vibrate in sympathy with the high-frequency waves and amplify the abrasive action as the tool cut through it.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“In 1983 Donald Rahn of Rahn Granite Surface Plate Co. told me that diamond drills, rotating at nine hundred revolutions per minute, penetrate granite at the rate of one inch in five minutes. In 1996, Eric Leither of Tru-Stone Corp. told me that these parameters have not changed since then. The feedrate of modern drills, therefore, calculates to be .0002 inch per revolution, indicating that the ancient Egyptians drilled into granite with a feedrate that was five hundred times greater or deeper per revolution of the drill than modern drills! The other characteristics of the artifacts also pose a problem for modern drills. Somehow the Egyptians made a tapered hole with a spiral groove that was cut deeper through the harder constituent of the granite. If conventional machining methods cannot answer just one of these questions, how do we answer all three?”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The most compelling evidence for the likelihood that the Great Pyramid was constructed by craftspeople with specialized knowledge and advanced techniques is the precision with which it was built. This precision reveals more about the true nature of its builders than any inscription or cartouche. There is no way to ignore the accuracy of this stonecutting, despite Egyptologists' interpretations of the inscriptions found in pyramids or temples in Egypt. After all, hieroglyphics, like any language, has the potential to be misunderstood.
After discussing much of the preceding information with the artisans at today's building sites, machine shops, and quarry mills, I became aware of the reason why we are still influenced by ideas that are not compatible with practical application. The artisans of today are too busy making a living to give serious thought to scholarly theories, and even when gross inequities are presented to them, they respond with a cynical shrug. When told that giant limestone casing stones, which were cut to within 1/100 of an inch, were cut with hammer and chisel, a typical response was a shake of the head.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“It now remains for those who are absolutely convinced that the ancient Egyptians constructed the pyramids using primitive techniques to build a pyramid themselves, using those same techniques that they propose the Egyptians used. As part of such an attempt, it would help if they cut out just one seventy-ton block of granite from the Aswan quarry, which is located five hundred miles away, using their hardened copper chisels or dolerite balls and then transported the block to the Giza Plateau with their barges, ropes, and manpower. If the proponents of traditional theories of constructing the pyramids are able to accomplish this feat, then we should give serious consideration to their proposals about pyramid construction.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The quantity of stone that had to be quarried, hauled, and hoisted into place in the Great Pyramid becomes even more impressive when it is compared with other civil engineering feats, whether real or imagined. It has been stated that it contains more stone than that used in all the churches, cathedrals, and chapels built in England since the time of Christ. Thirty Empire State Buildings could be built with the estimated 2,300,000 stones. A wall three-feet high and one-foot thick could be built across the United States and back using the amount of masonry contained in the Great Pyramid.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“if we were to build a Great Pyramid today, we would need a lot of patience. In preparation for his book "5/5/2000 Ice: The Ultimate Disaster", Richard Noone asked Merle Booker, technical director of the Indiana Limestone Institute of America, to prepare a time study of what it would take to quarry, fabricate, and ship enough limestone to duplicate the Great Pyramid. Using the most modern quarrying equipment available for cutting, lifting, and transporting the stone, Booker estimated that the present-day Indiana limestone industry would need to triple its output, and it would take the entire industry, which as I have said includes thirty-three quarries, twenty-seven years to fill the order for 131,467,940 cubic feet of stone.
These estimates were based on the assumption that production would proceed without problems. Then we would be faced with the task of putting the limestone blocks in place. The level of accuracy in the base of the Great Pyramid is astounding, and is not demanded, or even expected, by building codes today. Civil engineer Roland Dove, of Roland P. Dove & Associates, explained that .02 inch per foot variance was acceptable in modern building foundations. When I informed him of the minute variation in the foundation of the Great Pyramid, he expressed disbelief and agreed with me that in this particular phase of construction, the builders of the pyramid exhibited a state of the art that would be considered advanced by modern standards.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“I looked more closely at what I considered to be the most significant information regarding the Great Pyramid, which was the accuracy with which it was built. It soon became obvious to me that the researchers on both sides of the issue were sympathetic to the craftspeople involved in building the pyramids. But the researchers were not craftspeople themselves, and they did not have the perspective gained through years of experience working with their hands and with machinery. Having that experience myself, I have some very strong opinions regarding the level of manufacturing expertise practiced by the ancient Egyptians. They were not primitive by any means, and their craftsmanship and precision would be an extreme challenge to duplicate today.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Current theories regarding the function and construction of the pyramid fall short. A credible theory would have to explain the following conditions found inside the Great Pyramid:
-The selection of granite as the building material for the King's Chamber. It is evident that in choosing granite, the builders took upon themselves an extremely difficult task.
-The presence of four superfluous chambers above the King's Chamber.
-The characteristics of the giant granite monoliths that were used to separate these so-called "construction chambers."
-The presence of exuviae, or the cast-off shells of insects, that coated the chamber above the King's Chamber, turning those who entered black.
-The violent disturbance in the King's Chamber that expanded its walls and cracked the beams in its ceiling but left the rest of the Great Pyramid seemingly undisturbed.
-The fact that the guardians were able to detect the disturbance inside the King's Chamber, when there was little or no exterior evidence of it.
-The reason the guardians thought it necessary to smear the cracks in the ceiling of the King's Chamber with cement.
-The fact that two shafts connect the King's Chamber to the outside.
-The design logic for these two shafts—their function, dimensions, features, and so forth.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“This chamber held a mystery for the early explorers who entered its confines, a mystery that has baffled people for decades. The chamber was coated with a layer of black dust, which, upon analysis, turned out to be exuviae, or the cast-off shells and skins of insects. There were no living insects found in the Great Pyramid, which made this discovery even more mysterious. What prompted hordes of insects to single out this one sealed chamber and shed their skins? It is a mystery that has never been satisfactorily explained. In fact, there has not been any attempt to explain it, and because there is no logical answer that fits in with any previously proposed theory, no one has given it much attention.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Rudolph Gantenbrink's important discovery [of a door with metallic handles found with a robot inside a shaft in the Great Pyramid] has forced many Egyptologists to finally accept that their theories are flawed. This is an interesting development. Academic mores normally dictate that when a theory contains flaws, or unsubstantiated data that supports critical elements on which the theory is built, the entire theory must either be thrown out or revised. Instead of the tomb theory being dismissed, however, Gantenbrink himself was dismissed from the project. He discovered the "door" on March 22, 1993. A week later, he was told to pack up his robot and leave Egypt. Gantenbrink has the technology to go beyond the so-called door but, presumably because of political reasons, has been refused permission to resume his research in Egypt. Gantenbrink, with an engineer's typical pragmatism, stated, 'I take an absolute neutral position. It is a scientific process, and there is no need whatsoever to answer questions with speculation when these questions could be answered much more easily by continuing the research. Yet because of a stupid feud between what I call believers and non-believers, I am condemned as someone who is speculating. But I am not. I am just stating the facts. We have a device [ultrasonic] that would discover if there is a cavity behind the slab. It is nonsensical to make theories when we have the tools to discover the facts.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt