请选择您的送货地点
国家/地区页面的选择会产生各种变化，例如价格、运输选项和产品可用性。
控制系统
可以用不同的控制概念补充 igus® 高性价比和具有独立适应性的机械臂。 一种解决方案采用工业控制器，该控制器由 Commonplace Robotics GmbH 公司制造，并且专门为 robolink® D 设计。 它提供了一个易于使用的软件。 在软件的帮助下，机器人的运动序列可显示出来，并且可以用易于理解的方式进行编程和控制。模块化 robolink® 原理使得机械臂也可以与自编程控制器一起使用，从而提供最大的模块化。 robolink® 机械爪臂和控制器相结合，可以轻松实现单调任务（如质检、装配或调试）的自动化，也可以轻松协调工作流程。
D1 assembly kit for 2-axis kinematics
Product information
- Set of 2x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff
TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy
igus® Robot Control (iRC) software for gantries & delta robots
Product information
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
- Diverse automation tasks with simple programming software
- For gantries and delta robots
- Easy software installation for Windows 10
- Use with a PC or tablet
- Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhoff
- 10m cable length
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
从 31,081.72 RMB/Pc.
至产品页面
igus Robot Control Handheld
Product information
- Handheld enables the robot to be commissioned and moved
- Suitable for the igus Robot Control
- Convenient operation for left and right-handers
- User-friendly operation via touch display
D1 assembly kit for 3-axis kinematics
Product information
- Set of 3x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff
TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy
The robot control system igus® Robot Control for Scara and articulated arm robots
Product information
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
- Diverse automation tasks with simple programming software
- For SCARA robots and articulated arm robots
- Easy software installation for Windows 10
- Use with a PC or tablet
- Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhof
- 10m cable length
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
从 31,081.72 RMB/Pc.
至产品页面
igus Robot Control I/O Modul
Product information
- Extension to 7 additional digital inputs and outputs
- Suitable for the igus Robot Control
- Plug&Play solution
igus Robot Control motor modul
Product information
- Extension of a motor module
- Suitable for the igus Robot Control
- Control of additional axes possible
- Plug & Play solution
D1 control system set for 3-axis kinematics
Product information
- Without connection cables
- Set of 3x igus® D1 dryve
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff
TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy
D1 control system set for 2-axis kinematics
Product information
- Without connection cables
- Set of 2x igus® D1 dryve
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff
TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy
Controller kit D7 for 2-axis-kinematics
Product information
- Without connection cables
- Set consists of 2x drylin D7
- Can control stepper motors with up to 2.7 A continuous current at supply voltage of up to 48 V
- Ready to use immediately
- Easy control
- Exact positioning
新型
Controller kit D7 for 3-axis-kinematics
Product information
- Without connection cables
- Set consists of 3x drylin D7
- Can control stepper motors with up to 2.7 A continuous current at supply voltage of up to 48 V
- Ready to use immediately
- Easy control
- Exact positioning
Controller kit D8 for 2-axis-kinematics
Product information
- Without connection cables
- Set consists of 2x drylin D8
- Can control stepper motors with up to 4A continuous current at supply voltage of up to 48V
- Ready to use immediately
- Easy control
- Exact positioning
Controller kit D8 for 3-axis-kinematics
Product information
- Without connection cables
- Set consists of 3x drylin D8
- Can control stepper motors with up to 4A continuous current at supply voltage of up to 48V
- Ready to use immediately
- Easy control
- Exact positioning
Controller kit D9 for 2-axis-kinematics
Product information
- Without connection cables
- Set consists of 2x drylin D9
- Can control stepper motors with up to 7A continuous current at supply voltage of up to 48V
- Ready to use immediately
- Easy control
- Exact positioning
Controller kit D9 for 3-axis-kinematics
Product information
- Without connection cables
- Set consists of 3x drylin D9
- Can control stepper motors with up to 7A continuous current at supply voltage of up to 48V
- Ready to use immediately
- Easy control
- Exact positioning
咨询
我很乐于解答您的问题
购物及咨询
联系我们:
周一至周五，7:00-20:00。周六8:00-12:00。
在线:
24小时