Please choose your delivery location
The selection of the country/region page can influence various factors such as price, shipping options and product availability.You are now leaving igus.si
The selection of the country/region page can influence various factors such as price, shipping options and product availability.When switching pages, we will try to match the items in your shopping cart with those available for your country.Please check your shopping cart after switching, thank you!
My contact person
Hennlich, d.o.o.
Nadzor motorja
Sistem za kontrolni sistem motorjev igus® D1 in D2 se lahko uporablja za vse tip motorjev. Z izjemo igusovega sistema za kontrolni sistem motorja D3 , lahko vsi delujejo pri 48 V. Igusov sistem za kontrolni sistem motorja D3 deluje s 24 V. Sistemi za krmiljenje motorjev D3, D7, D8 in D9 so namenjeni enostavni avtomatizaciji neposredno na kontrolni sistem in zato ne potrebujejo programske opreme in/ali osebnega računalnika. Sistema za kontrolni sistem motorja igus® D1 in D2 prav tako ne zahtevata namestitve dodatne programske vgradnja, ampak se programira s pomočjo spletnih iskalnikov. Na ta način je mogoče parametre parametrirati na osebnem računalniku, pa tudi na tablici in pametnem telefonu. Za to ni potrebno znanje programiranja. Vse izhodne stopnje lahko delujejo tudi kot podrejene, zaradi česar so vsestranske.
drylin® D7- (X) stepper motor output stage
- Suitable for 28 - 42mm motor flange size (NEMA11-17)
- Up to 3A peak current
- 5-24V control & 24-48V load voltage
- Operation mode 1: clock/direction
- Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
- Quiet operation & automatic tuning
93.63 EUR/Pc.
4 items, thereof ready for shipping from Germany:
3 in 24-48 hours
1 in 10 working days
To the product page
drylin® D8- (X) stepper motor output stage
Product information
- Without connecting cable
- Set consists of 3x drylin® D8
- Can control stepper motors with a continuous current of up to 4A with a supply voltage of up to 48V
- Ready to use immediately
- Easy control
- Exact positioning
114.87 EUR/Pc.
4 items, thereof ready for shipping from Germany:
4 in 24-48 hours
To the product page
drylin® D2 motor control system for stepper, DC and EC/BLDC motors
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
506.48 EUR/Pc.
1 items, thereof ready for shipping from Germany:
1 in 24-48 hours
To the product page
drylin® D9- (X) stepper motor output stage
- Suitable for 86mm motor flange size (NEMA34)
- Up to 9.8A peak current
- 5-24V control & 24-48V load voltage
- Operation mode 1: clock/direction
- Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
- Quiet operation & automatic tuning
125.90 EUR/Pc.
4 items, thereof ready for shipping from Germany:
4 in 24-48 hours
To the product page
drylin® D1 motor control system for stepper, DC and EC/BLDC motors
- A wide range of automation tasks by simple parameterisation, no programming necessary
- For single axes, line, flat, linear and room linear robots and delta robots
- No software installation or app required
- Use with PC, tablet or smart phone
- Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
- Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy
522.69 EUR/Pc.
1 items, thereof ready for shipping from Germany:
1 in 24-48 hours
To the product page
drylin® D3 for direct current motors
- Simple automation directly using the control system without software and/or PC
- Operation with limit switch or via power consumption
- Left/right operation and speed control directly on the housing
- Option for external switches/joysticks
- Various modes of operation, such as tip operation and start to finish (semi-automatic)
- Various adjustable acceleration ramps
- Power supply via 24V/2.5A
All relevant documents for dryve D3 can be found in the downloads.
177.41 EUR/Pc.
1 items, thereof ready for shipping from Germany:
1 in 10 working days
To the product page
drylin® D3-LM motor control system for DC motors with loop mode
- Same dimensions as the standard D3
- Extended functions for "Micro Automation"
- Individually preprogrammed pendulum movements
- Individually preprogrammed pause times between movements
Upon request
To the product page
New
drylin D5 DC motor output stage
drylin D5 DC motor output stage
- Ready for immediate use. No parameterization or programming necessary
- Left/right run via digital input
- Velocities & accelerations via external PWM input signal
- 12-24V supply voltage
- 10A nominal current / 30A peak current
- With housing for industrial use
- Free pattern programs here
130.48 EUR/Pc.
1 items, thereof ready for shipping from Germany:
1 in 24-48 hours
To the product page
New
drylin D6 DC motor output stage
drylin D6 DC motor output stage
- Ready for immediate use. No parameterization or programming necessary
- Left/right run via digital input
- Velocities & accelerations via external PWM input signal
- 12-24V supply voltage
- 10A nominal current / 30A peak current
- With housing for industrial use
- Free pattern programs here
117.92 EUR/Pc.
1 items, thereof ready for shipping from Germany:
1 in 24-48 hours
To the product page
Shopping Cart
The selected article has been added to your shopping cart.
From here you can initiate enquiries or orders.
From here you can initiate enquiries or orders.