Search Results (144)

The optical remote sensors carried by the Jilin-1 KF02 series satellites have an imaging resolution better than 0.5 m and a width of 150 km. There are radiometric problems, such as stripe noise, vignetting, and inter-slice chromatic aberration, in their raw images. In this paper, a relative radiometric correction method based on temperature normalization is proposed for the response characteristics of sensors and the structural characteristics of optical splicing of Jilin-1 KF02 series satellites cameras. Firstly, a model of temperature effect on sensor output is established to correct the variation of sensor response output digital number (DN) caused by temperature variation during imaging process, and the image is normalized to a uniform temperature reference. Then, the horizontal stripe noise of the image is eliminated by using the sensor scan line and dark pixel information, and the vertical stripe noise of the image is eliminated by using the method of on-orbit histogram statistics. Finally, the method of superposition compensation is used to correct the vignetting area at the edge of the image due to the lack of energy information received by the sensor so as to ensure the consistency of the image in color and image quality. The proposed method is verified by Jilin-1 KF02A on-orbit images. Experimental results show that the image response is uniform, the color is consistent, the average Streak Metrics (SM) is better than 0.1%, Root-Mean-Square Deviation of the Mean Line (RA) and Generalized Noise (GN) are better than 2%, Relative Average Spectral Error (RASE) and Relative Average Spectral Error (ERGAS) are greatly improved, which are better than 5% and 13, respectively, and the relative radiation quality is obviously improved after relative radiation correction. Full article

Detecting and characterizing continuous changes on Earth’s surface has become critical for planning and development. Since 2016, Planet Labs has launched hundreds of nanosatellites, known as Doves. Despite the advantages of their high spatial and temporal resolution, these nanosatellites’ images still present inconsistencies in radiometric resolution, limiting their broader usability. To address this issue, a model for radiometric normalization of PlanetScope (PS) images was developed using Multispectral Instrument/Sentinel-2 (MSI/S2) sensor images as a reference. An extensive database was compiled, including images from all available versions of the PS sensor (e.g., PS2, PSB.SD, and PS2.SD) from 2017 to 2022, along with data from various weather stations. The sampling process was carried out for each band using two methods: Conditioned Latin Hypercube Sampling (cLHS) and statistical visualization. Five machine learning algorithms were then applied, incorporating both linear and nonlinear models based on rules and decision trees: Multiple Linear Regression (MLR), Model Averaged Neural Network (avNNet), Random Forest (RF), k-Nearest Neighbors (KKNN), and Support Vector Machine with Radial Basis Function (SVM-RBF). A rigorous covariate selection process was performed for model application, and the models’ performance was evaluated using the following statistical indices: Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Lin’s Concordance Correlation Coefficient (CCC), and Coefficient of Determination (R²). Additionally, Kruskal–Wallis and Dunn tests were applied during model selection to identify the best-performing model. The results indicated that the RF model provided the best fit across all PS sensor bands, with more accurate results in the longer wavelength bands (Band 3 and Band 4). The models achieved RMSE reflectance values of approximately 0.02 and 0.03 in these bands, with R² and CCC ranging from 0.77 to 0.90 and 0.87 to 0.94, respectively. In summary, this study makes a significant contribution to optimizing the use of PS sensor images for various applications by offering a detailed and robust approach to radiometric normalization. These findings have important implications for the efficient monitoring of surface changes on Earth, potentially enhancing the practical and scientific use of these datasets. Full article

Rice farming in Italy accounts for about 50% of the EU’s rice area and production. Precision agriculture has entered the scene to enhance sustainability, cut pollution, and ensure food security. Various studies have used remote sensing tools like satellites and drones for multispectral imaging. While Sentinel-2 is highly regarded for precision agriculture, it falls short for specific applications, like at the “Riserva San Massimo” (Gropello Cairoli, Lombardia, Northern Italy) rice farm, where irregularly shaped crops need higher resolution and frequent revisits to deal with cloud cover. A prior study that compared Sentinel-2 and the higher-resolution PlanetScope constellation for vegetative indices found a seasonal miscalibration in the Normalized Difference Vegetation Index (NDVI) and in the Normalized Difference Red Edge Index (NDRE). Dr. Agr. G.N. Rognoni, a seasoned agronomist working with this farm, stresses the importance of studying the radiometric intercalibration between the PlanetScope and Sentinel-2 vegetative indices to leverage the knowledge gained from Sentinel-2 for him to apply variable rate application (VRA). A high-resolution SkySat image, taken almost simultaneously with a pair of Sentinel-2 and PlanetScope images, offered a chance to examine if the irregular distribution of vegetation and barren land within rice fields might be a factor in the observed miscalibration. Using an unsupervised pixel-based image classification technique on SkySat imagery, it is feasible to split rice into two subclasses and intercalibrate them separately. The results indicated that combining histograms and agronomists’ expertise could confirm SkySat classification. Moreover, the uneven spatial distribution of rice does not affect the seasonal miscalibration object of past studies, which can be adjusted using the methods described here, even with images taken four days apart: the first method emphasizes accuracy using linear regression, histogram shifting, and histogram matching; whereas the second method is faster and utilizes only histogram matching. Full article

The National Oceanic and Atmospheric Administration (NOAA) 21 Visible Infrared Imaging Radiometer Suite (VIIRS) was successfully launched on 10 November 2022. To ensure the required instrument performance, a series of Post-Launch Tests (PLTs) were performed and analyzed. The primary calibration source for NOAA-21 VIIRS Reflective Solar Bands (RSBs) is the Solar Diffuser (SD), which retains the prelaunch radiometric calibration standard from prelaunch to on-orbit. Upon reaching orbit, the SD undergoes degradation as a result of ultraviolet solar illumination. The rate of SD degradation (called the H-factor) is monitored by a Solar Diffuser Stability Monitor (SDSM). The initial H-factor’s instability was significantly improved by deriving a new sun transmittance function from the yaw maneuver and one-year SDSM data. The F-factors (normally represent the inverse of instrument gain) thus calculated for the Visible/Near-Infrared (VISNIR) bands were proven to be stable throughout the first year of the on-orbit operations. On the other hand, the Shortwave Infrared (SWIR) bands unexpectedly showed fast degradation, which is possibly due to unknown substance accumulation along the optical path. To mitigate these SWIR band gain changes, the NOAA VIIRS Sensor Data Record (SDR) team used an automated calibration software package called RSBautoCal. In March 2024, the second middle-mission outgassing event to reverse SWIR band degradation was shown to be successful and its effects are closely monitored. Finally, the deep convective cloud trends and lunar collection results validated the operational F-factors. This paper summarizes the preliminary on-orbit radiometric calibration updates and performance for the NOAA-21 VIIRS SDR products in the RSB. Full article

With advancements in hardware and software, non-destructive radiometric analytical methods have become popular in a wide range of applications. A typical case is the study of the leaching process of metals from mineral ores and mine tailings. The objective of the current study was to develop a radiometric method based on neutron activation analysis (NAA), in particular, delayed gamma neutron activation analysis (DGNAA), to monitor the process of Mn and Zn leaching from Ti ore, Cu mine tailings, and Zn-Pb mine tailings. The DGNAA method was performed using a neutron source: a deuterium-tritium (D-T) neutron generator for Mn and a MARIA research nuclear reactor for Zn. Laboratory-scale Mn leaching from Ti ores, Cu tailings, and Zn-Pb tailings was investigated using delayed gamma-rays of ⁵⁶Mn (half-life of 2.6 h). The dissolution efficiencies of Mn were found to increase with interaction time and HCl concentration (1 to 5 M) and to vary with the leaching temperature (22.5 to 110 °C). Such results were found to agree with those obtained by total reflection X-ray fluorescence (TXRF) spectrometry for the same samples. ⁶⁵Zn (half-life of 244 days) was chosen to investigate real-time/online leaching of Zn in Ti ore, Cu tailings, and Zn-Pb tailings. During online monitoring, Zn recovery was also reported to increase with increased leaching time. After approximately 300 min of leaching, 80%, 79%, and 53% recovery of Zn in Zn-Pb tailings, Ti ore, and Cu tailings, respectively, were reported. Theoretically, developed mathematical prediction models for ⁶⁵Zn radiotracer analysis showed that the spherical diffusion model requires much less time to attain saturation compared to the linear diffusion model. The results of NAA for Zn were compared with those obtained by handheld X-ray fluorescence (handheld-XRF) and TXRF analysis. The analyzed samples encompassed leached Ti ore, Cu tailings, and Zn-Pb tailings which were subjected to different conditions of leaching time, temperature, and HCl concentrations. The XRF analysis confirmed that the leaching efficiencies of Zn rise with the increase in leaching time and HCl concentration and fluctuate with leaching temperature. The developed approach is important and can be applied in laboratories and industrial setups for online monitoring of the recovery of any element whose isotopes can be activated using neutrons. The efficiency of the metal-recovery process has a direct impact on the normal operation and economic advantages of hydrometallurgy. Full article

The accurate estimation of forest aboveground biomass (AGB) in areas with complex terrain is very important for quantifying the carbon sequestration capacity of forest ecosystems and studying the regional or global carbon cycle. In our previous research, we proposed the radiometric terrain correction (RTC) process for introducing normalized correction factors, which has strong effectiveness and robustness in terms of the backscattering coefficient of polarimetric synthetic aperture radar (PolSAR) data and the monadic model. However, the impact of RTC on the correctness of feature extraction and the performance of regression models requires further exploration in the retrieval of forest AGB based on a machine learning multiple regression model. In this study, based on PolSAR data provided by ALOS-2, 117 feature variables were accurately extracted using the RTC process, and then Boruta and recursive feature elimination with cross-validation (RFECV) algorithms were used to perform multi-step feature selection. Finally, 10 machine learning regression models and the Optuna algorithm were used to evaluate the effectiveness and robustness of RTC in improving the quality of the PolSAR feature set and the performance of the regression models. The results revealed that, compared with the situation without RTC treatment, RTC can effectively and robustly improve the accuracy of PolSAR features (the Pearson correlation R between the PolSAR features and measured forest AGB increased by 0.26 on average) and the performance of regression models (the coefficient of determination R² increased by 0.14 on average, and the rRMSE decreased by 4.20% on average), but there is a certain degree of overcorrection in the RTC process. In addition, in situations where the data exhibit linear relationships, linear models remain a powerful and practical choice due to their efficient and stable characteristics. For example, the optimal regression model in this study is the Bayesian Ridge linear regression model (R² = 0.82, rRMSE = 18.06%). Full article

This research develops and validates new decomposition models for hourly direct Normal Irradiance (DNI) estimations for Southern African data. Localised models were developed using data collected from the Southern African Universities Radiometric Network (SAURAN). Clustered areas within Southern Africa were identified, and the developed cluster decomposition models highlighted the potential advantages of grouping data based on shared geographical and climatic attributes. This clustering approach could enhance decomposition model performance, particularly when local data are limited or when data are available from multiple nearby stations. Further, a regional Southern African decomposition model, which encompasses a wide spectrum of climatic regions and geographic locations, exhibited notable improvements over the baseline models despite occasional overestimation or underestimation. The results demonstrated improved DNI estimation accuracy compared to the baseline models across all testing and validation datasets. These outcomes suggest that utilising a localised model can significantly enhance DNI estimations for Southern Africa and potentially for developing similar models in diverse geographic regions worldwide. The overall metrics affirm the substantial advancement achieved with the regional model as an accurate decomposition model representing Southern Africa. Two stations were used as a validation study, as an application example where no localised model was available, and the cluster and regional models both outperformed the comparative decomposition models. This study focused on validating the model for hourly DNI in Southern Africa within a range of $K_t$-intervals from 0.175 to 0.875, and the range could be expanded and validated for future studies. Implementing accurate decomposition models in developing countries can accelerate the adoption of renewable energy sources, diminishing reliance on coal and fossil fuels. Full article

Relative radiometric normalization (RRN) is a critical pre-processing step that enables accurate comparisons of multitemporal remote-sensing (RS) images through unsupervised change detection. Although existing RRN methods generally have promising results in most cases, their effectiveness depends on specific conditions, especially in scenarios with land cover/land use (LULC) in image pairs in different locations. These methods often overlook these complexities, potentially introducing biases to RRN results, mainly because of the use of spatially aligned pseudo-invariant features (PIFs) for modeling. To address this, we introduce a location-independent RRN (LIRRN) method in this study that can automatically identify non-spatially matched PIFs based on brightness characteristics. Additionally, as a fast and coregistration-free model, LIRRN complements keypoint-based RRN for more accurate results in applications where coregistration is crucial. The LIRRN process starts with segmenting reference and subject images into dark, gray, and bright zones using the multi-Otsu threshold technique. PIFs are then efficiently extracted from each zone using nearest-distance-based image content matching without any spatial constraints. These PIFs construct a linear model during subject–image calibration on a band-by-band basis. The performance evaluation involved tests on five registered/unregistered bitemporal satellite images, comparing results from three conventional methods: histogram matching (HM), blockwise KAZE, and keypoint-based RRN algorithms. Experimental results consistently demonstrated LIRRN’s superior performance, particularly in handling unregistered datasets. LIRRN also exhibited faster execution times than blockwise KAZE and keypoint-based approaches while yielding results comparable to those of HM in estimating normalization coefficients. Combining LIRRN and keypoint-based RRN models resulted in even more accurate and reliable results, albeit with a slight lengthening of the computational time. To investigate and further develop LIRRN, its code, and some sample datasets are available at link in Data Availability Statement. Full article

The Normalized Difference Vegetation Index (NDVI) is widely used for monitoring vegetation status, as accurate and reliable NDVI time series are crucial for understanding the relationship between environmental conditions, vegetation health, and productivity. Ground digital cameras have been recognized as important potential data sources for validating remote-sensing NDVI products. However, differences in the spectral characteristics and imaging methods between sensors onboard satellites and ground digital cameras hinder direct consistency analyses, thereby limiting the quantitative application of camera-based observations. To address this limitation and meet the needs of vegetation monitoring research and remote-sensing NDVI validation, this study implements a novel NDVI camera. The proposed camera incorporates narrowband dual-pass filters designed to precisely separate red and near-infrared (NIR) spectral bands, which are aligned with the configuration of sensors onboard satellites. Through software-controlled imaging parameters, the camera captures the real radiance of vegetation reflection, ensuring the acquisition of accurate NDVI values while preserving the evolving trends of the vegetation status. The performance of this NDVI camera was evaluated using a hyperspectral spectrometer in the Hulunbuir Grassland over a period of 93 days. The results demonstrate distinct seasonal characteristics in the camera-derived NDVI time series using the Green Chromatic Coordinate (GCC) index. Moreover, in comparison to the GCC index, the camera’s NDVI values exhibit greater consistency with those obtained from the hyperspectral spectrometer, with a mean deviation of 0.04, and a relative root mean square error of 9.68%. This indicates that the narrowband NDVI, compared to traditional color indices like the GCC index, has a stronger ability to accurately capture vegetation changes. Cross-validation using the NDVI results from the camera and the PlanetScope satellite further confirms the potential of the camera-derived NDVI data for consistency analyses with remote sensing-based NDVI products, thus highlighting the potential of camera observations for quantitative applications The research findings emphasize that the novel NDVI camera, based on a narrowband spectral design, not only enables the acquisition of real vegetation index (VI) values but also facilitates the direct validation of vegetation remote-sensing NDVI products. Full article

The definition and calculation of a spectral index suitable for characterizing vegetated landscapes depend on the number and widths of the bands of the imaging instrument. Here, we point out the advantages of performing the fusion of hyperspectral (HS) satellite data with the multispectral (MS) bands of Sentinel-2 to calculate such vegetation indexes as the normalized area over reflectance curve (NAOC) and the red-edge inflection point (REIP), which benefit from the availability of quasi-continuous pixel spectra. Unfortunately, MS data may be acquired from satellite platforms with very high spatial resolution; HS data may not. Despite their excellent spectral resolution, satellite imaging spectrometers currently resolve areas not greater than 30 × 30 m², where different thematic classes of landscape may be mixed together to form a unique pixel spectrum. A way to resolve mixed pixels is to perform the fusion of the HS dataset with the same dataset produced by an MS scanner that images the same scene with a finer spatial resolution. The HS dataset is sharpened from 30 m to 10 m by means of the Sentinel-2 bands that have all been previously brought to 10 m. To do so, the hyper-sharpening protocol, that is, $m:n$ fusion, is exploited in two nested steps: the first one to bring the 20 m bands of Sentinel-2 all to 10 m, the second one to sharpen all the 30 m HS bands to 10 m by using the Sentinel-2 bands previously hyper-sharpened to 10 m. Results are presented on an agricultural test site in The Netherlands imaged by Sentinel-2 and by the satellite imaging spectrometer recently launched as a part of the environmental mapping and analysis program (EnMAP). Firstly, the excellent match of statistical consistency of the fused HS data to the original MS and HS data is evaluated by means of analysis tools, existing and developed ad hoc for this specific case. Then, the spatial and radiometric accuracy of REIP and NAOC calculated from fused HS data are analyzed on the classes of pure and mixed pixels. On pure pixels, the values of REIP and NAOC calculated from fused data are consistent with those calculated from the original HS data. Conversely, mixed pixels are spectrally unmixed by the fusion process to resolve the 10 m scale of the MS data. How the proposed method can be used to check the temporal evolution of vegetation indexes when a unique HS image and many MS images are available is the object of a final discussion. Full article

Accurate retrieval of forest above ground biomass (AGB) based on full-polarization synthetic aperture radar (PolSAR) data is still challenging for complex surface regions with fluctuating terrain. In this study, the three-step process of radiometric terrain correction (RTC), which includes polarization orientation angle correction (POAC), effective scattering area correction (ESAC), and angular variation effect correction (AVEC), is adopted as the technical framework. In the ESAC stage, a normalized correction factor is introduced based on local incidence angle and radar incidence angle to achieve accurate correction of PolSAR data information and improve the inversion accuracy of forest AGB. In order to verify the validity and robustness of this research method, the full-polarization SAR data of ALOS-2 and the ground measured AGB data collected in the Saihanba research area in 2020 were used for experiments. Our findings revealed that in the ESAC phase, the introduction of the normalized correction factor can effectively eliminate the ESA phenomenon and improve the correlation coefficients of the backscatter coefficient and AGB. Taking the data of 25 July 2020 as an example, ESAC increases the correlation coefficients between AGB and the backscattering coefficients of HH, HV, and VV polarization channels by 0.343, 0.296, and 0.382, respectively. In addition, the RTC process has strong robustness in different AGB statistical models and different date PolSAR data. Full article

Interferometric synthetic aperture radar (InSAR) and tomographic SAR measurement techniques are commonly used for the three-dimensional (3D) reconstruction of complex areas, while the effectiveness of these methods relies on the interferometric coherence among SAR images with minimal angular disparities. Radargrammetry exploits stereo image matching to determine the spatial coordinates of corresponding points in two SAR images and acquire their 3D properties. The performance of the image matching process directly impacts the quality of the resulting digital surface model (DSM). However, the presence of speckle noise, along with dissimilar geometric and radiometric distortions, poses considerable challenges in achieving accurate stereo SAR image matching. To address these aforementioned challenges, this paper proposes a radargrammetric method based on the composite registration of multi-aspect SAR images. The proposed method combines coarse registration using scale invariant feature transform (SIFT) with precise registration using normalized cross-correlation (NCC) to achieve accurate registration between multi-aspect SAR images with large disparities. Furthermore, the multi-aspect 3D point clouds are merged using the proposed radargrammetric 3D imaging method, resulting in the 3D imaging of target scenes based on multi-aspect SAR images. For validation purposes, this paper presents a comprehensive 3D reconstruction of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) using Ka-band airborne SAR images. It does not necessitate prior knowledge of the target and is applicable to the detailed 3D imaging of large-scale areas with complex structures. In comparison to other SAR 3D imaging techniques, it reduces the requirements for orbit control and radar system parameters. To sum up, the proposed 3D imaging method with composite registration guarantees imaging efficiency, while enhancing the imaging accuracy of crucial areas with limited data. Full article

Quantitatively characterizing coastal salt-marsh terrains and the corresponding spatiotemporal changes are crucial for formulating comprehensive management plans and clarifying the dynamic carbon evolution. Multiline light detection and ranging (LiDAR) exhibits great capability for terrain measuring for salt marshes with strong penetration performance and a new scanning mode. The prerequisite to obtaining the high-precision terrain requires accurate filtering of the salt-marsh vegetation points from the ground/mudflat ones in the multiline LiDAR data. In this study, a new alternative salt-marsh vegetation point-cloud filtering method is proposed for drone multiline LiDAR based on the extreme gradient boosting (i.e., XGBoost) model. According to the basic principle that vegetation and the ground exhibit different geometric and radiometric characteristics, the XGBoost is constructed to model the relationships of point categories with a series of selected basic geometric and radiometric metrics (i.e., distance, scan angle, elevation, normal vectors, and intensity), where absent instantaneous scan geometry (i.e., distance and scan angle) for each point is accurately estimated according to the scanning principles and point-cloud spatial distribution characteristics of drone multiline LiDAR. Based on the constructed model, the combination of the selected features can accurately and intelligently predict the category of each point. The proposed method is tested in a coastal salt marsh in Shanghai, China by a drone 16-line LiDAR system. The results demonstrate that the averaged AUC and G-mean values of the proposed method are 0.9111 and 0.9063, respectively. The proposed method exhibits enhanced applicability and versatility and outperforms the traditional and other machine-learning methods in different areas with varying topography and vegetation-growth status, which shows promising potential for point-cloud filtering and classification, particularly in extreme environments where the terrains, land covers, and point-cloud distributions are highly complicated. Full article

The Ice Pathfinder satellite (code: BNU-1) is the first Chinese microsatellite, designed for monitoring polar climate and environmental changes. The major payload of BNU-1 is the wide-field camera which provides multispectral satellite images with a 73.69 m spatial resolution and a 739 km swath width. However, the color misrepresentation issue can be observed as the BUN-1 image appears yellowish as it gets farther towards the center field of view (FOV). The blue band of the image appears to be higher near the center FOV and declines generously towards both the edge areas of the image, which may cause the color misrepresentation issue. In this study, we develop a relative sensor normalization method to reduce the radiance errors of the blue band of BNU-1 images. This method uses the radiometric probability density distribution of the BNU-1 panchromatic band as a reference, correcting the probability density distribution of the blue band radiance first. Then, the mean adjustment is used to correct the mean of the blue band radiance after probability density function (PDF) correction, obtaining the corrected radiance in the blue band. Comparisons with the ground measurements and the Landsat8 image reveal the following: (1) The radiances of snow surfaces also have good consistency with ground observations and Landsat-8 images in the red, green, and blue bands. (2) The radiance errors of the uncorrected BNU-1 images are eliminated. The RMSE decreases from 80.30 to 32.54 W/m²/μm/sr. All these results indicate that the on-orbit relative correction method proposed in this study can effectively reduce the radiance errors of the BNU-1 images. Full article

An increasing number of commercial nanosatellite-based Earth-observing sensors are providing high-resolution images for much of the coastal ocean region. Traditionally, to improve the accuracy of normalized water-leaving radiance ($n{L}_w$) estimates, sensor gains are computed using in-orbit vicarious calibration methods. The initial series of Planet nanosatellite sensors were primarily designed for land applications and are missing a second near-infrared band, which is typically used in selecting aerosol models for atmospheric correction over oceanographic regions. This study focuses on the vicarious calibration of Planet sensors and the duplication of its red band for use in both the aerosol model selection process and as input to bio-optical ocean product algorithms. Error measurements show the calibration performed well at the Marine Optical Buoy location near Lanai, Hawaii. Further validation was performed using in situ data from the Aerosol Robotic Network—Ocean Color platform in the northern Adriatic Sea. Bio-optical ocean color products were generated and compared with products from the Visual Infrared Imaging Radiometric Suite sensor. This approach for sensor gain generation and usage proved effective in increasing the accuracy of $n{L}_w$ measurements for bio-optical ocean product algorithms. Full article