building design
Recently Published Documents

Abstract As the population grows and land prices rise, high-rise buildings are becoming more and more common and popular in urban cities. Traditional high-rise building design method generally assumes the structure is fixed at the base, because the influence of soil-structure interaction is considered to be beneficial to the response of structures under the earthquake excitation. However, recent earthquakes and studies indicated that SSI may exert detrimental effects on commonly used structural systems. In this study, a numerical soil-structure model is established in Abaqus software to explore the impacts of SSI on high-rise frame-core tube structures. The seismic response of frame-core tube structures with various structural heights, height-width ratios, foundation types and soil types is studied. The numerical simulation results including maximum lateral deflections, foundation rocking, inter-storey drifts and base shears of rigid and flexible base buildings are discussed and compared. The results reveal the lateral displacement and inter-storey drifts of the superstructure can be amplified when SSI is taking into account, while the base shears are not necessarily reduced. Increasing the stiffness of the foundation and the subsoil can generally increase the seismic demand of structures. It has been concluded that it is neither safe nor economical to consider only the beneficial effects of SSI or to ignore them in structural design practice.

The COVID-19 pandemic forced the accessibility, social gathering, lifestyle, and working environment to be changed to reduce the infection. Coronavirus spreads between people in several different ways. Small liquid particles (aerosols, respiratory droplets) from an infected person are transmitted through air and surfaces that are in contact with humans. Reducing transmission through modified heating, ventilation, and air conditioning (HVAC) systems and building design are potential solutions. A comprehensive review of the engineering control preventive measures to mitigate COVID-19 spread, healthy building design, and material was carried out. The current state-of-the-art engineering control preventive measures presented include ultraviolet germicidal irradiation (UVGI), bipolar ionization, vertical gardening, and indoor plants. They have potential to improve the indoor air quality. In addition, this article presents building design with materials (e.g., copper alloys, anti-microbial paintings) and smart technologies (e.g., automation, voice control, and artificial intelligence-based facial recognition) to mitigate the infections of communicable diseases.

Background Many American workers spend over 7 hours a day at work in primarily sedentary office work. Physical activity is a key aspect of optimizing health and preventing disease; yet, 80% of American adults do not meet the recommended guidelines for physical activity. In this systematic review, the relationship between physical work environment and physical activity among office workers was explored. Methods Of the 321 studies screened, 26 studies met the eligibility criteria and were included for evaluation in this systematic review. Results Of the 26 studies, four were cross-sectional studies, 14 were quasi-experimental studies, and eight were randomized control trials. Physical activity during the workday was measured using self-report surveys and electromechanical devices such as accelerometers. Physical work environments examined by the studies included different types of desks ( n = 16), office arrangements ( n = 5), and building design ( n = 5). In nine studies, office environments and building work environments designed to promote activity using active design principles such as stairs and flexible workspaces were associated with increased physical activity. Sit–stand desks reduced overall sitting time, but had a minimal effect on physical activity. Conclusion/Application to practice Offices and buildings designed for activity had the largest impact on physical activity among office workers. To increase physical activity in office workers, focus should be placed on opportunities to increase incidental movement that can increase physical activity throughout the workday. Occupational health nurses should advocate workspace designs that can increase physical activity in workers.

Abstract. Three-dimensional visualization of 3D parcels have been investigated in many viewpoints in order to fulfil the demands of expanding cities and the increasing complexity of building design. In Malaysia, with the growing strata developed area, particularly residential buildings (i.e., apartments), land administration agencies will need to improve their application in sharing and disseminating cadastral data. Hence, web-based solutions have been recognized as an important visualization requirement among end-users. It acts as a distributed information platform that allows 3D data sharing with the minimal architecture of client-server connects by the internet. There are two key topics addressed in this paper, which is the depiction of 3D strata objects on the web and the linkage to their legal data. This paper also describes the implementation of conceptual model of strata object based on Malaysian Land Administration Domain Model (LADM) Country Profile for the representation of spatial and non-spatial data. Tools such as PostgreSQL with PostGIS extension is used for storing data, CesiumJS was used to handle and visualise 3D strata objects in a 3D browser that was customised as a web application. The results demonstrate a viewer of a multi-storey buildings using web visualization to display both physical and legal information of 3D Strata objects based on LADM country profile (Malaysia). This particular paper also attempts to address 3D visualization of spatial and non-spatial data query using a web application, which also suggests further directions for 3D cadastral visualization development.

Most of the developed world currently lives above the tropic of Cancer in cold climate regions. It follows that most of the top architectural firms are from the same countries, and most of their work is based on that experience. Experience that does not travel well to hotter countries. This paper is mainly concerned with the climates of the Middle East region, which are hot in summer and have mild or cold winters, and where the humidity ranges from dry to humid. It is a review of the factors, designs, and solutions that designers sometimes ignore, undervalue, or on the other hand, put too much weight on when working in such climates. An overview of thermal solutions is conducted, and a critique and suitability of each one for hotter climates are offered. Some of the solutions, which are thought to be helpful, have little benefit, especially traditional ones, which are not up to present-day standards and lifestyles. Others, such as courtyards, do more harm than good. A couple of case studies to evaluate houses with and without thermal measures showed improvements of 23-48%. The paper will evaluate architectural, cooling, and building design solutions according to suitability in dry and medium humidity, warm and hot countries.

PurposeWhole building life cycle assessment (WBLCA) is a key methodology to reduce the environmental impacts in the building sector. Research studies usually face challenges in presenting comprehensive LCA results due to the complexity of assessments at the building level. There is a dearth of methods for the systematic evaluation and optimization of the WBLCA performance at the design stage. The study aims to develop a design optimization framework based on the proposed WBLCA method to evaluate and improve the environmental performance at the building level.Design/methodology/approachThe WBLCA development method is proposed with detailed processes based on the EN 15978 standard. The environmental product declaration (EPD) methods were adopted to ensure the WBLCA is comprehensive and reliable. Building information modeling (BIM) was used to ensure the building materials and assembly contributions are accurate and provide dynamic material updates for the design optimization framework. Furthermore, the interactive BIM-LCA calculation processes were demonstrated for measuring the environmental impacts of design upgrades. The TOPSIS-based LCA results normalization was selected to conduct the comparisons of various building design upgrades.FindingsThe case study conducted for a residential building showed that the material embodied impacts and the operational energy use impacts are the two critical factors that contribute 60–90% of the total environmental impacts and resource uses. Concrete and wood are the main material types accounting for an average of 65% of the material embodied impacts. The air and water heating for the house are the main energy factors, as these account for over 80% of the operational energy use. Based on the original WBLCA results, two scenarios were established to improve building performance through the design optimization framework.Originality/valueThe LCA results show that the two upgraded building designs create an average of 5% reduction compared with the original building design and improving the thermal performance of the house with more insulation materials does not always reduce the WBLCA results. The proposed WBLCA method can be used to compare the building-level environmental performances with the similar building types. The proposed framework can be used to support building designers to effectively improve the WBLCA performance.

The development of the smart cities with new and integrated information and communication technologies has changed the traditional industries’ processes. One of the domains is construction industry which plays an important supporting role for the economic development of a country, but at the same time, the construction industry is also an industry with high energy consumption and high pollution. Therefore, in order to alleviate the contradiction between economic development and resources and the environment, the construction industry must achieve sustainable development and take the road of green construction. In order to carry out the evaluation of the design effect of colleges and universities, this paper introduces the multisensor perception and fuzzy comprehensive evaluation methods. First, through the design and analysis of the sensor perception system used in the building environment, the collection, acquisition, analysis, and processing of complex information of heterogeneous multiterminals are obtained. Secondly, cluster analysis and genetic algorithms are used in the processing and analysis process of building multiterminal sensor data. The security aspect is also taking into account to design the methods. The system test verifies the performance of the university building design effect evaluation model, which can provide a reference for the sustainable development of the construction industry.