chemical solutions
Recently Published Documents

Grouting includes a range of processes that involve the injection of wet or dry materials into the ground to provide improved engineering properties. Common aims are to increase strength or stiffness or to reduce permeability within the mass of ground treated. This paper, mainly, addresses permeation grouting for the improvement of soils, in terms of strengthening or reduction of permeability, and compensation grouting for the displacement of structures during subsurface exploration. The grouts used to make permeation grouting are suspensions and chemical solutions. The suspensions penetrate well into soils with granulometry up to coarse sand. On the contrary, the chemical solutions penetrate satisfactorily in finer formations up to fine sands or coarse sludges. Because some chemical solutions are toxic or generally harmful to the environment and humans, an effort has been made internationally in recent years to replace them with inorganic fine-grained suspensions.

Lay summary To visualise tissues to determine the presence of disease or simply to understand anatomy, it is important to preserve fresh tissue. Fixatives are chemical solutions that preserve tissues to enable microscopic evaluation. However, some fixatives introduce artefact such as shrinkage of cells. Recently, a new fixative, Form-Acetic, was developed that is superior for preserving the structure of ovary tissue and allows investigation of ovary composition. One component of the ovary is hyaluronic acid (HA), which plays a crucial role in normal ovary function and fertility. Importantly, HA is sensitive to different fixative solutions. Therefore, it is meaningful to verify whether Form-Acetic is suitable for detecting HA. In this study, adult mouse ovaries were fixed in Form-Acetic and HA was detected. All HA-containing structures in the ovary were clearly distinguished which proves that the novel fixative allows the detection of HA.

Corrosion is an electrochemical reaction process that is natural and takes place by itself, corrosion cannot be prevented or stopped but can only be controlled using the Electro Plating method. Electroplating is a process that produces a thin layer of metal on top of another metal surface by electrolysis or electroplating using direct current (DC) and chemical solutions (electrolytes). The process of giving this protective layer aims to protect the metal from corrosion, in this study, will make a prototype electro plating tool for small industry or Home Industry, the completeness of the components needed to make a prototype electro plating tool is an AC transformer matic 30-50 A 12V, ampere meter, volt meter, fuse and switch, then nickel solution serves to provide strength, metal resistance from rust and chrome solution serves to provide resistance to corrosion and gives a glossy white color so it looks better, to produce a strong coating. With the occurrence of the anode, cathode, and electrolyte solution which are used entirely as related to coating materials, especially metals are illustrated as, the cathode can be interpreted as the workpiece to be coated, connected to the negative pole of the electric current source and the electrolyte in the form of a solution whose molecules can be dissolved. in water and decomposes into positively or negatively charged particles and the deposition in the process is due to the presence of ions in the electrolyte and will settle on the cathode and the process of coating the metal occursPlease write your abstract in English version here.

Over the last decade, efforts to breed new Cannabis sativa L. cultivars with high Cannabidiol (CBD) and other non-psychoactive cannabinoids with low tetrahydrocannabinol (THC) levels have increased. In this context, the identification of the viability and quantity of pollen, which represents the fitness of male gametophytes, to accomplish successful pollination is of high importance. The present study aims to evaluate the potential of impedance flow cytometry (IFC) for the assessment of pollen viability (PV) and total number of pollen cells (TPC) in two phytocannabinoid-rich cannabis genotypes, KANADA (KAN) and A4 treated with two different chemical solutions, silver thiosulfate solution (STS) and gibberellic acid (GA3). Pollen was collected over a period of 8 to 24 days after flowering (DAF) in a greenhouse experiment. Impedance flow cytometry (IFC) technology was used with Cannabis sativa to assess the viability and quantity of pollen. The results showed that the number of flowers per plant was highest at 24 DAF for both genotypes, A4 (317.78) and KAN (189.74). TPC induced by STS was significantly higher compared to GA3 over the collection period of 8 to 24 DAF with the highest mean TPC of 1.54 × 105 at 14 DAF. STS showed significantly higher viability of pollen compared to GA3 in genotype KAN, with the highest PV of 78.18% 11 DAF. Genotype A4 also showed significantly higher PV with STS at 8 (45.66%), 14 (77.88%), 18 (79.37%), and 24 (51.92%) DAF compared to GA3. Furthermore, counting the numbers of flowers did not provide insights into the quality and quantity of pollen; the results showed that PV was highest at 18 DAF with A4; however, the number of flowers per plant was 150.33 at 18 DAF and was thus not the maximum of produced flowers within the experiment. IFC technology successfully estimated the TPC and differentiated between viable and non-viable cells over a period of 8 to 24 DAF in tested genotypes of Cannabis sativa. IFC seems to be an efficient and reliable method to estimate PV, opening new chances for plant breeding and plant production processes in cannabis.

The effect of chemical activators on the properties of activated carbon from sago waste was conducted in this study by using ZnCl2, H3PO4, KOH, and KMnO4 chemical solutions. The carbonized sago waste was added to each chemical solution, boiled at 85 °C for 4 h, and heated at 600 °C for 3 h. The porosity, microstructural, proximate, and surface chemistry analyses were carried out using nitrogen adsorption with employing the Brunauer Emmett Teller (BET) method and the Barret-Joyner-Halenda (BJH) calculation, scanning electron microscopy by using energy dispersive spectroscopy, X-ray diffractometer, simultaneous thermogravimetric analysis system, and the Fourier-transform infrared spectroscopy. The results showed that the activated carbon prepared using ZnCl2 acid had the highest specific surface area of 546.61 m2/g, while the KOH activating agent surpassed other chemicals in terms of a refined structure and morphology, with the lowest ash content of 10.90%. The surface chemistry study revealed that ZnCl2 and KOH activated carbon showed phenol and carboxylate groups. Hence, ZnCl2 acid was suggested as activating agents for micropore carbon, while KOH was favorable to producing a mesopore-activated carbon from sago waste.

Grouting includes a range of processes that involve the injection of wet or dry materials into the ground to provide improved engineering properties. Common aims are to increase strength or stiffness or to reduce permeability within the mass of ground treated. The simplest process in concept is the permeation of the pore spaces with a fluid grout which then sets, and provides the desired properties. Jet grouting employs erosion and mixing using high energy jets, to attack a wide-ranging set of soils and applications. This paper, mainly, addresses permeation grouting for the improvement of soils, in terms of strengthening or reduction of permeability, and compensation grouting for the displacement of structures during subsurface exploration. The historical evolution of these two grouting processes is described leading up to present-day practice. Reference is made to grouting materials, methods of injection, equipment, limitations and verification for each type of grouting. The grouts used to make permeation grouting are mainly suspensions and chemical solutions. The suspensions penetrate well into soils with granulometry up to coarse sand. On the contrary, the chemical solutions penetrate satisfactorily in finer formations up to fine sands or coarse sludges. Because some chemical solutions are toxic or generally harmful to the environment and humans, an effort has been made internationally in recent years to replace them with inorganic fine-grained suspensions.

In this study, we developed a rapid nondestructive tool for testing rust spread in a metal covered by a paint layer by using a THz time-domain spectroscopy system at a speed of 100 Hz/pixel. Time-of-flight imaging helps identify rust formation by exclusively obtaining the reflection from the steel below the paint surface. The use of frequency-selective imaging allows us to manipulate the contrast in rust imaging. Higher contrast is generally obtained when monitoring using the higher frequency component. In addition, we monitored the spread of rust in a steel plate under the influence of two different chemical solutions: NaCl and acid. We found that in the early stages, the decrease in THz reflection was governed by the high-frequency components due to the formation of lepidocrocite, whereas the low-frequency component develops as the proportion of hematite increases with time.

Thin films of lead zirconate titanate Pb(Zr0,52Ti0,48)O3 (PZT) with thickness of 1.4 μm were prepared on Si/SiO2/TiO2/Pt substrates by chemical solutions deposition. Based on the obtained films, the structures of PZT cantilevers were formed, with a length from 500 to 1000 /um and wide from 100 to 500 μm. Platinum (100 nm) as the bottom and top electrode, has been deposited by magnetron sputtering. PZT cantilevers werereleased by etching the sacrificial layer in SF6. The resonance characteristics of the PZT cantilevers were determined by the light lever method using a special optical measuring stand. Output characteristics of the PZT cantilevers, can be used in MEMS devices, specially, in MEMS resonators.

Cut flowers have become an export income in the global floriculture market. They have multiple uses, such as for home beautification, in ceremonies (including weddings and funerals), and as symbols of love, appreciation, respect, etc., in humane society. Each type of cut flower has a different vase life and the longevity of their freshness is linked to preharvest, harvest, and postharvest tools and conditions. The postharvest quality and vase life must be considered in order to obtain the desirable qualities of cut flowers, and factors that affect this are important in the floral industry. The use of floral preservative solutions is good practice for prolonging the vase life of cut flowers. Currently, the eco-friendly solutions, which are used as floral preservatives for extending cut flower vase life, have been discovered to be a low-cost and organic alternative as compared to chemical solutions. However, there are certain problems associated with the use of chemical and eco-friendly solutions. In this review, we summarize several potential approaches to improve flower vase life and discuss the best choices for holding-preservative-solution practices.