mixed stands
Recently Published Documents

Estimating tree height is essential for modelling and managing both pure and mixed forest stands. Although height–diameter (H–D) relationships have been traditionally fitted for pure stands, attention must be paid when analyzing this relationship behavior in stands composed of more than one species. The present context of global change makes also necessary to analyze how this relationship is influenced by climate conditions. This study tends to cope these gaps, by fitting new H–D models for 13 different Mediterranean species in mixed forest stands under different mixing proportions along an aridity gradient in Spain. Using Spanish National Forest Inventory data, a total of 14 height–diameter equations were initially fitted in order to select the best base models for each pair species-mixture. Then, the best models were expanded including species proportion by area (mi) and the De Martonne Aridity Index (M). A general trend was found for coniferous species, with taller trees for the same diameter size in pure than in mixed stands, being this trend inverse for broadleaved species. Regarding aridity influence on H–D relationships, humid conditions seem to beneficiate tree height for almost all the analyzed species and species mixtures. These results may have a relevant importance for Mediterranean coppice stands, suggesting that introducing conifers in broadleaves forests could enhance height for coppice species. However, this practice only should be carried out in places with a low probability of drought. Models presented in our study can be used to predict height both in different pure and mixed forests at different spatio-temporal scales to take better sustainable management decisions under future climate change scenarios.

Different methods have been proposed for in situ root-length density (RLD) measurement. One widely employed is the time-consuming sampling of soil cores or monoliths (MO). The profile wall (PW) method is a less precise, but faster and less laborious alternative. However, depth-differentiated functions to convert PW RLD estimates to MO RLD measurements have not yet been reported. In this study, we perform a regression analysis to relate PW results to MO results and determine whether calibration is possible for distinct crop groups (grasses, brassicas and legumes) consisting of pure and mixed stands, and whether soil depth affects this calibration. The methods were applied over two years to all crop groups and their absolute and cumulative RLD were compared using a linear (LR) and multiple linear (MLR) regression. PW RLD was found to highly underestimate MO RLD in absolute values and in highly rooted areas. However, a close agreement between both methods was found for cumulative root-length (RL) when applying MLR, highlighting the influence of soil depth. The level of agreement between methods varied strongly with depth. Therefore, the application of PW as the main RLD estimation method can provide reliable estimates of cumulative root distribution traits of cover crops.

AbstractIn this chapter, we review the current long-term growth trends and short-term growth reaction to single or repeated stress events on tree and stand level in Europe. Based on growth trend analyses, the chapter reveals the strong human footprint on forest ecosystems.First, we use long-term experiments and increment cores to show change in growth trends within the last centuries. Growth reactions are caused by deposition and climate change rather than by silvicultural measures. Second, we look closer on regional-specific deviations from the general trend. Climate change, drought events, acid rain and O3 are causing regional-specific growth reaction patterns. Third, we assess stress events and the resilience and resistance of monospecific and mixed stands against biotic and abiotic stress in view of the ongoing growth trends.The revealed tree and stand growth behaviours are highly relevant, as any changes of forest growth and structure have strong impacts on the provision of goods and ecosystem services. The results underline the importance of biomonitoring and suggest counteracting measures by forest planning, adaptation of silvicultural guidelines for existing forest and innovative design of future forests stands.

Mountainous hardwood mixed stands offer challenges to timber harvesting operations in practice, including a harsh climate, variable topography, steep terrain, and large-sized timbers. This paper aims to develop productivity and cost models for a mountain-ground-based harvesting operation across the terrain (e.g., slope conditions), stand (e.g., tree volume) environmental (e.g., weather), and yard (e.g., winching distance) variables and to assess GHG emissions related to the equipment in use. This development was implemented in a timber harvesting practice under single-tree selection in mountainous forests of Iran where a motor-manual chainsaw is used for felling and a rubber-tired cable skidder is used for log extraction. The average delay-free productivity was 4.55 m3 for felling and 14.73 m3 h−1for skidding. Lower production costs and higher productivity rates were observed over the gentle slopes and in sunny conditions. The average production costs ranged between USD 4.27m−3 for felling and USD 5.35m−3 for skidding. The average emissions ranged between 0.96 kg m−3 for felling and 7.06 kg m−3 for skidding in snowy conditions over steep slopes. The study’s results confirm avoiding harvesting operations on steep slopes (greater than 35%) and in extreme weather conditions to obtain higher work efficiency and to minimize adverse effects of machinery on forest ecosystems. The results should be of use to harvest managers and forest planners considering the application of ground-based harvesting operations using a semi-mechanized system on a range of operating conditions in mountain hardwood stands.

A growing body of research suggests mixed-species stands are generally more productive than pure stands as well as less sensitive to disturbances. However, these effects of mixture depend on species assemblages and environmental conditions. Here, we present the Salem simulator, a tool that can help forest managers assess the potential benefit of shifting from pure to mixed stands from a productivity perspective. Salem predicts the dynamics of pure and mixed even-aged stands and makes it possible to simulate management operations. Its purpose is to be a decision support tool for forest managers and stakeholders as well as for policy makers. It is also designed to conduct virtual experiments and help answer research questions. In Salem, we parameterised the growth in pure stand of 12 common tree species of Europe and we assessed the effect of mixture on species growth for 24 species pairs (made up of the 12 species mentioned above). Thus, Salem makes it possible to compare the productivity of 36 different pure and mixed stands depending on environmental conditions and user-defined management strategies. Salem is essentially based on the analysis of National Forest Inventory data. A major outcome of this analysis is that we found species mixture most often increases species growth, in particular at the poorest sites. Independently from the simulator, foresters and researchers can also consider using the species-specific models that constitute Salem: the growth models including or excluding mixture effect, the bark models, the diameter distribution models, the circumference-height relationship models, as well as the volume equations for the 12 parameterised species. Salem runs on Windows, Linux, or Mac. Its user-friendly graphical user interface makes it easy to use for non-modellers. Finally, it is distributed under a LGPL license and is therefore free and open source.

Abstract Pine- and spruce-dominatedmixed stands occupy a substantial part of the forested area. Depending on soil and hydrological conditions of different landscapes, stands of different forest types and tree stand composition dominate. Modern forestry is focused on growing monodominant stands, but it is worth noting that mixed stands have higher productivity and stability. This work is devoted to identifying the patterns of distribution of mixed stands by forest type in different geographic landscapes. For the study, two landscape districts of the Leningrad Region (Valdaysko-Tikhvinsky and Luzhsko-Volkhovsky) with landscape mosaics of different structure were selected. The dominant forest types and types of mixed forest stands were determined by summing the areas of each plant association. To carry out the calculations, data of the state forest inventory of the Leningrad Region were used. In the course of this study, it was found that blueberry forest type was the most common forest type in mixed stands. Most of the landscapes of the study region were dominated by spruce-deciduous stands, but in some landscapes with hilly relief, a predominance of spruce-pine stands was observed.

Abstract The applicability of the topic is conditioned by the increase the share of the recreational forests and the development of the urban agglomeration. The purpose of the study was to determine the recreational capacity of natural green areas, followed by an ecological and economic assessment. In the work, recreational and sanitary-hygienic assessments were carried out, the stages of digression, the classes of stability of plantings were determined, followed by an ecological and economic assessment of suburban green areas. The weighted average value of the ecological recreational capacity is determined. In plantations with a predominance of oak or pine in the existing types of forest growing conditions, the specific value of the ecological recreational capacity is the same, therefore, approaches to the development of these forests may be the same. To assess the ecological potential of plantings, the content of carbon, absorbed carbon dioxide, and oxygen released by them were calculated. The results of the calculations show that the maximum amount of C2 is observed in mixed stands with a predominance of oak, the minimum-in pure pine stands. Obtained results of the investigation let to realize the forest planning, taking into consideration the results of the eco-economic estimate.

AbstractForest transformation from coniferous monocultures to mixed stands is being promoted worldwide, including the introduction of fast-growing broadleaved tree species within native stands. Here, we studied how enrichment of temperate European Scots pine (Pinus sylvestris) forest by North-American northern red oak Quercus rubra impacted macronutrient concentrations in two long-lived and dominant components of the forest understory: bilberry Vaccinium myrtillus and lingonberry V. vitis-idaea. Study sites were located in forest complexes (central Poland) which occupy continuously reforested lands (hereafter ancient forests) as well as post-agricultural lands (recent forests), all suitable for mesic pine forests. Samples of bilberry and lingonberry leaves, stems, and fruits were collected in pine stands and in adjacent Scots pine-red oak stands, in both ancient and recent forests. Concentrations of macronutrients (C, N, P, K, Ca, S, and Mg) in aboveground biomass components were analysed using standardized chemical procedures. The study revealed intra- and interspecific (bilberry vs. lingonberry) differences in concentrations of all nutrients in leaves, stems, and fruits, except for invariable C concentrations. Macronutrient accumulations in plants were decreased by land-use discontinuity and favoured by enrichment of tree stands by Q. rubra. The estimated macronutrient pools were much higher for V. myrtillus than V. vitis-idaea in all forest types studied. They were lower in forests enriched with Q. rubra, both ancient (up to 25.5% for bilberry and 99.9% for lingonberry) and recent (46.9% and 99.9%, respectively), as well as in recent pine forest (46.6% and 81.1%, respectively) than in ancient pine forest. Higher K and S pools (39.3% and 6.5%, respectively) noted for bilberry in an ancient forest with Q. rubra were exceptions. Despite more effective accumulations of elements at the species level, macronutrient pools of Vaccinium myrtillus and V. vitis-idaea decreased significantly in the presence of introduced Q. rubra due to negative impacts of this broadleaved tree on bilberry and lingonberry cover and biomass. Therefore, the limitation of alien Q. rubra planting in sites of mesic pine forest with the abundant occurrence of V. myrtillus and/or V. vitis-idaea is recommended. Graphic abstract

The absence of management practice/silvicultural treatments in the complex tropical mixed forests of Nigeria has led to uncontrolled logging in natural forest stands and loss of biodiversity. To sustain production, protection and conservation in these complex tropical mixed stands, this study proposes the application of a selection method – the BDq method (B: basal area, D: maximum diameter, q-ratio) to manage these stands. Two strata were used as a pilot test: stratum 1 consisted of 15 plots and stratum 2 of 7 plots, each with an area of 0.25 ha. Only trees with a diameter at breast height (d) ≥ 10.0 cm were considered in this study. Harvesting with the BDq method was quantified, by setting B at 20 m2, 25 m2 and 30 m2/ha corresponding respectively to intensive, medium and light harvesting regimes. D was set at 65 cm and the q-ratio was computed for each plot. The results showed that the three BDq regimes prescribed (intensive, medium and light) yielded reasonable felling intensities (FI), derived as the percentage of extracted volume (Vext) and biomass (Wext). The Vext and FI for stratum 1 ranged from 39.94-62.30 m3/ha and 11.22-18.18%; the results for stratum 2 were 30.44-51.33 m3/ha and 10.02-17.57%. For biomass, the Wext and FI ranged from 18.46-29.82 t/ha and 9.40-15.95% for stratum 1 and 14.16-24.82 t/ha and 9.73-17.50% for stratum 2. These findings show that applying the BDq method to the complex tropical mixed forests of Nigeria would yield attractive stands.