mixing properties
Recently Published Documents

Rosette-type diffusers are becoming popular nowadays for discharging wastewater effluents. Effluents are known as buoyant jets if they have a lower density than the receiving water, and they are often used for municipal and desalination purposes. These buoyant effluents discharged from rosette-type diffusers are known as rosette-type multiport buoyant discharges. Investigating the mixing properties of these effluents is important for environmental impact assessment and optimal design of the diffusers. Due to the complex mixing and interacting processes, most of the traditional simple methods for studying free single jets become invalid for rosette-type multiport buoyant discharges. Three-dimensional computational fluid dynamics (3D CFD) techniques can satisfactorily model the concentration fields of rosette-type multiport buoyant discharges, but these techniques are typically computationally expensive. In this study, a new technique of simulating rosette-type multiport buoyant discharges using combined 3D CFD and multigene genetic programming (MGGP) techniques is developed. Modeling the concentration fields of rosette-type multiport buoyant discharges using the proposed approach has rarely been reported previously. A validated numerical model is used to carry out extensive simulations, and the generated dataset is used to train and test MGGP-based models. The study demonstrates that the proposed method can provide reasonable predictions and can significantly improve the prediction efficiency.

Abstract The alloying behavior of AlMg alloy in the liquid form at 1073 K has been theoretically investigated in the framework of four-parameter model which is based on Maclaurin series. The analytical expressions for thermodynamic functions such as excess free mixing energy, free mixing energy, enthalpy of mixing and entropy of mixing and microscopic functions such as concentration fluctuations at the long wavelength limit and Warren-Cowley chemical short range order parameter have been derived. These expressions have been used to compute the excess Gibbs free energy of mixing, Gibbs free energy of mixing, activity, enthalpy(heat) of mixing, excess entropy of mixing, entropy of mixing, concentration fluctuations in long wavelength limit and Warren-Cowley short range order parameters of AlMg liquid alloys at 1073 K. The investigation shows the excellent concurrence between the experimental and theoretical measurements of the mixing properties of AlMg liquid alloys at 1073 K. Interaction parameters of energy depends on temperature.

Data from direct numerical simulations of disperse bubbly flows in a vertical channel are used to study the effect of the bubbles on the carrier-phase turbulence. We developed a new method, based on an extension of the barycentric map approach, that allows us to quantify and visualize the anisotropy and componentiality of the flow at any scale. Using this we found that the bubbles significantly enhance anisotropy in the flow at all scales compared with the unladen case, and that for some bubble cases, very strong anisotropy persists down to the smallest scales of the flow. The strongest anisotropy observed was for the cases involving small bubbles. Concerning the energy transfer among the scales of the flow, our results indicate that for the bubble-laden cases, the energy transfer is from large to small scales, just as for the unladen case. However, there is evidence of an upscale transfer when considering the transfer of energy associated with particular components of the velocity field. Although the direction of the energy transfer is the same with and without the bubbles, the behaviour of the energy transfer is significantly modified by the bubbles, suggesting that the bubbles play a strong role in altering the activity of the nonlinear term in the flow. The skewness of the velocity increments also reveals a strong effect of the bubbles on the flow, changing both its sign and magnitude compared with the single-phase case. We also consider the normalized forms of the fourth-order structure functions, and the results reveal that the introduction of bubbles into the flow strongly enhances intermittency in the dissipation range, but suppresses it at larger scales. This strong enhancement of the dissipation-scale intermittency has significant implications for understanding how the bubbles might modify the mixing properties of turbulent flows.