tight gas
Recently Published Documents

Abstract The tight gas reservoirs of Haima Supergroup provide the majority of gas production in the Sultanate of Oman. The paper discusses a possibility of using the anomalies from natural radioactivity to evaluate the fracture height for complex tight gas in mature fields of Oman. The standard industry practice is adding radioactive isotopes to the proppant. Spectral Gamma Ray log is used to determine near wellbore traced proppant placement. Spectral Noise log in combination with Production logs helps to identify the active fractures contributing to production. These methods complement each other, but they are obviously associated with costs. Hence, majority of wells are fracced without tracers or any other fracture height diagnostics. However, in several brown fields, an alternative approach to identify fracture height has been developed which provides fit-for-purpose results. It is based on the analysis of naturally occurring radioactive minerals (NORM) precipitation. The anomalies were observed in the many gas reservoirs even in cases when tracers were not used. At certain conditions, these anomalies can be used to characterize fracture propagation and optimize future wells hydraulic Fracture design. A high number of PLTs and well test information were analyzed. Since tight formations normally don't produce without fracturing, radioactive anomalies flag the contributing intervals and hence fracture propagation. The main element of analysis procedure is related to that fact that if no tracers applied, the discrepancy between normalized Open Hole Gamma Ray and Gamma Ray taken during PLT after 6-12 months of production can be used instead to establish fracture height. This method cannot be applied for immediate interpretation of fracture propagation because time is required to precipitate NORM and using the anomalies concept. The advantage of this method is that it can be used in some fields to estimate the frac effectiveness of wells without artificial tracers. It is normally assumed that the Natural radioactivity anomalies appear mainly due to co-production of the formation water. However, in the fields of interest the anomalies appear in wells producing only gas and condensate. This observation provides an opportunity for active fracture height determination at minimum cost.

1. Abstract Various datasets are generated during hydraulic fracturing, flowback- and well-testing operations, which require consistent integration to lead to high-quality well performance interpretations. An automated digital workflow has been created to integrate and analyze the data in a consistent manner using the open-source programming language R. This paper describes the workflow, and it explains how it automatically generates well performance models and how it analyzes raw diagnostic fracture injection test (DFIT) data using numerical algorithms and Machine Learning. This workflow is successfully applied in a concession area located in the center of the Sultanate of Oman, where to date a total of 25+ tight gas wells are drilled, hydraulically fractured and well-tested. It resulted in an automated and standardized way of working, which enabled identifying trends leading to improved hydraulic fracturing and well-testing practices.

Abstract Unlike many unconventional resources that demonstrate a high level of heterogeneity, conventional tight gas formations often perform consistently according to reservoir quality and the applied completion technology. Technical review over a long period may reveal the proper correlation between reservoir quality, completion technology, and well performance. For many parts of the world where conventional tight gas resources still dominate, the learnings from a review can be adapted to improve the performance of reservoirs with similar features. South Sulige Operating Company (SSOC), a joint venture between PetroChina and Total, has been operating in the Ordos basin for tight gas since 2011. The reservoir is known to have low porosity, low permeability, and low reservoir pressure, and requires multistage completion and fracturing to achieve economic production. Over the last 8 years, there has been a clear technical evolution in South Sulige field, as a better understanding of the reservoir, improvement of the completion deployment, optimized fracturing design, and upgraded flowback strategy have led to the continuous improvement of results in this field. Pad drilling of deviated boreholes, multistage completions with sliding sleeve systems, hybrid gel-fracturing, and immediate flowback practices, gradually proved to be the most effective way to deliver the reservoir's potential. Using the absolute open-flow (AOF) during testing phase for comparative assessment from South Sulige field, we can see that in 2012 this number was 126 thousand std m3/d in 2012, and by 2018 this number had increased to 304 thousand std m3/d, representing a 143% incremental increase. Thus, technical evolution has been proved to bring production improvement over time. Currently, South Sulige field not only outperforms offset blocks but also remains the top performer among the fields in the Ordos basin. The drilling and completion practices from SSOC may be well suited to similar reservoirs and fields in the future.

Abstract An accurate Mechanical Earth Model (MEM) is of vital importance in tight gas reservoirs where hydraulic fracturing is the only way to produce hydrocarbons economically. The Barik tight gas reservoir is the main target in Khazzan and Ghazeer Fields at the Sultanate of Oman (Rylance et al., 2011). This reservoir consists of multiple low-permeability sandstone layers interbedded with marine shales. A good understanding of the fracture propagation in such a reservoir has a major effect on completion and fracturing design. The MEM derived from sonic logs and calibrated with core data needs to be further validated by independent measurements of the fracturing geometry. Multiple surveillance techniques have been implemented in the Barik reservoir to validate the MEM and to match observations from hydraulic fracturing operations. These techniques include closure interpretation using a wireline deployed formation testing assembly, the use of mini-frac injection tests with deployed bottomhole pressure gauges, execution of post injection time-lapse temperature logging, the injection of radioactive tracers, associated production logging, subsequent pressure transient analysis and other techniques. A cross-disciplinary team worked with multiple sources of data to calibrate the MEM with the purpose of delivering a high-confidence prediction of the created fracture geometry, which honors all available surveillance data. In turn, this validation approach provided a solid basis for optimization of the completion and fracturing design, in order to optimally exploit this challenging reservoir and maximize the economic returns being delivered. For example, combination of stress testing with radioactive tracers provided confidence in stress barriers in this multilayered reservoir. Pressure transient analysis allowed to calibrate mechanical model to match fracturing half-length that is contributing to production. This paper provides extensive surveillance examples and workflows for data analysis. Surveillance of this degree in the same well is uncommon because of the associated time and cost. However, it provides unique value for understanding the target reservoir. This paper demonstrates the Value Of Information (VOI) that can be associated with such surveillance and provides a concrete and practical example that can be used for the justification of future surveillance programs associated with the hydraulic fracturing operations.

Abstract Efficient multistage hydraulic fracturing in horizontal wells in tight-gas formations with multilayered and laminated reservoirs is a very challenging subject matter; due to formation structure, required well trajectory, and the ability to establish a conductive and permanent connection between all the layers. BP Oman had initiated the technical journey to deliver an effective horizontal well multistage frac design through learnings obtained during three key pilot horizontal wells. Since these initial wells, additional candidates have been drilled and stimulated, resulting in further advancement of the learning curve. Many aspects will be covered in this paper, that will describe how to facilitate the most effective hydraulic fracture placement and production performance, under these laminated conditions. These approaches will include the completion and perforation selection, fracture initiation zone selection, fracture height consideration, frac fluid type and design. The paper will go on to describe a range of different surveillance options, including clean-up and performance surveillance as well as number of other factors. The experiences that have been gained provide valuable insight and learning about how to approach a multistage fracturing horizontal well program in this kind of depositional environment. Additionally, how these lessons can potentially be subsequently adapted and applied to access resources in the more challenging and higher risk areas of the field. For example, this paper will present direct comparison of over and under-displaced stages; differences in execution and production for cased hole and open hole completions; and many other variables that always under discussion for hydraulic fracturing in horizontal wells. This paper describes in detail the results of many multistage fracturing trials by BP Oman in horizontal wells drilled in challenging multilayered and laminated tight-gas reservoirs. These findings may help to cut short learning curve in similar reservoirs in the Middle East Region and elsewhere.