close agreement
Recently Published Documents

This paper studies regularities of proportional division, on the basis of which we show the possibility of effective application of the golden section method to modeling regularities of atomic systems and positioning of elements of noble gases of the periodic table. It is illustrated that by partial reconstruction of the Mendeleev tables, the elements of noble gases can be arranged along lines whose slope tangents in the coordinate system “the atomic number – the relative atomic mass” are in close agreement with the sequence of inverse Fibonacci numbers. It was shown that given the correct slope of axes, slope tangents of the corresponding lines does not change.

Using one-minute interval data of electric field and the records of rainfall measured at the ground surface, time sequence in the initial registration of precipitation and the onset of cloud electrification was examined for a series of 14 thunderstorms of the year 1973 at Pune to study the relationship between the initial development of precipitation and intensification of cloud electrification. The combined result of the 14 storms studied, each of which yielded precipitation, indicated in-cloud development of precipitation at least 3-7 minutes in advance of onset of cloud electrification. It is inferred from the other supplementing studies published by other workers and from the above result that in most cases the precipitation development in thunderstorms is initiated well before the electric field begins to intensify. This result is in close agreement with the result of previous studies.

Remote sensing has been studied for a long time to monitor the earth terrain. Remote sensing technology has been used globally in many different fields and one of the most popular area of study that uses remote sensing technology is snow monitoring. In previous researches, remote sensing has been modelled on snow area to study the scattering mechanisms of various scattering processes. In this paper, surface volume second order term that was dropped in previous study is derived, included and studied to observe the improvement in the surface volume backscattering coefficient. This new model is applied on snow layer above ground and the snow layer is modelled as a volume of ice particles as the Mie scatterers that are closely packed and bounded by irregular boundaries. Various parameters are used to investigate the improvement of adding the new term. Results show improvement in cross-polarized return, for all the range of parameters studied. Comparison is made with the field measurement result from U.S. Army Cold Regions Research and Engineering Laboratory (CRREL) in 1990. Close agreement is shown between developed model and data field backscattering coefficient result.

Abstract In the present work, a complete 2D chemical and thermal non-equilibrium numerical model coupled with a relatively simple sheath model is developed for hydrogen arcjet thruster. Conduction heat transfer in the anode wall is also included in the model. The operating voltages predicted by the model are compared with those in the literature and are found to be in close agreement. Power distributions for the various operating conditions are obtained, anode radiation loss primarily determines the thruster efficiency. Higher thruster efficiency was found to be associated with longer arc length. At cathode ion diffusion contribution dominates except at low input current where thermo-field electron current is dominant.

Abstract In this work, a printed ultra-wideband (UWB) antenna has been proposed exhibiting band notch characteristics. The proposed design covers the entire UWB band except for the 3.5 GHz band providing the band notch for the WiMAX band. This design consists of two-quarter elliptical patches placed symmetrically over the FR4 substrate. The elliptical shape of the patch is responsible for the UWB band achieved. The slot has been created on the optimized patch area to achieve the desired characteristics providing a notch for the WiMAX band. The slot in the patch is so perfectly designed that it gives the patch a perfect shape of butterfly wings. After designing, the proposed antenna was simulated and then fabricated. The fabricated and simulated results are in close agreement with each other which shows, the proposed UWB antenna is good enough for biomedical applications.

In this research, the plate embedded parts and grooved embedded parts reinforced concrete structures were investigated. Two types of plate embedded parts and three types of grooved embedded parts experienced coating treatment to enable sustainable function. Later, the ultimate failure capacity by bending experiments was conducted and compared with the theoretically calculated results. Moreover, three grooved embedded parts were simulated by ABAQUS to compare the results with the experimental exploration results, which was in close agreement with the theoretically calculated results and finite element analysis results. The result indicated that the failure modes of the embedded specimens under the five working conditions are all concrete vertebral failure. The plate-type embedded components were proved to exhibit higher ultimate bearing capacity than the grooved embedded parts. Moreover, the flexural and shear capacity of these five types of embedded parts has not been fully developed. The ultimate flexural and shear capacity of these five types of embedded parts could be further explored by adjusting the higher concrete grade.

Abstract Background Underreporting cases of infectious diseases poses a major challenge in the analysis of their epidemiological characteristics and dynamical aspects. Without accurate numerical estimates it is difficult to precisely quantify the proportions of severe and critical cases, as well as the mortality rate. Such estimates can be provided for instance by testing the presence of the virus. However, during an ongoing epidemic, such tests’ implementation is a daunting task. This work addresses this issue by presenting a methodology to estimate underreported infections based on approximations of the stable rates of hospitalization and death. Methods We present a novel methodology for the stable rate estimation of hospitalization and death related to the Corona Virus Disease 2019 (COVID-19) using publicly available reports from various distinct communities. These rates are then used to estimate underreported infections on the corresponding areas by making use of reported daily hospitalizations and deaths. The impact of underreporting infections on vaccination strategies is estimated under different disease-transmission scenarios using a Susceptible-Exposed-Infective-Removed-like (SEIR) epidemiological model. Results For the considered locations, during the period of study, the estimations suggest that the number of infected individuals could reach 30% of the population of these places, representing, in some cases, more than six times the observed numbers. These results are in close agreement with estimates from independent seroprevalence studies, thus providing a strong validation of the proposed methodology. Moreover, the presence of large numbers of underreported infections can reduce the perceived impact of vaccination strategies in reducing rates of mortality and hospitalization. Conclusions pBy using the proposed methodology and employing a judiciously chosen data analysis implementation, we estimate COVID-19 underreporting from publicly available data. This leads to a powerful way of quantifying underreporting impact on the efficacy of vaccination strategies. As a byproduct, we evaluate the impact of underreporting in the designing of vaccination strategies.

The dynamics of an integer-order and fractional-order Lorenz like system called Shimizu-Morioka system is investigated in this paper. It is shown thatinteger-order Shimizu-Morioka system displays bistable chaotic attractors, monostable chaotic attractors and coexistence between bistable and monostable chaotic attractors. For suitable choose of parameters, the fractional-order Shimizu-Morioka system exhibits bistable chaotic attractors, monostable chaotic attractors, metastable chaos (i.e. transient chaos) and spiking oscillations. The bifurcation structures reveal that the fractional-order derivative affects considerably the dynamics of Shimizu-Morioka system. The chain fractance circuit is used to designand implement the integer- and fractional-order Shimizu-Morioka system in Pspice. A close agreement is observed between PSpice based circuit simulations and numerical simulations analysis. The results obtained in this work were not reported previously in the interger as well as in fractional-order Shimizu-Morioka system and thus represent an important contribution which may help us in better understanding of the dynamical behavior of this class of systems.

Abstract. The long-term operation of pipelines, which, in many cases, exceeds their regulatory service life, causes the strain ageing of metal, as well as the appearance of local mechano-corrosive damages. In this regard, the use of composites to reinforce worn pipelines constitutes one of today’s most promising technologies. In this study, a comparative analysis was performed between the composite-reinforced steel pipe calculations that were conducted using the finite element method (FEM), and those that were conducted in accordance with the DSTU ISO 24817:2019 standard. The FEM numerical calculations were carried out using the complete factorial experiment design (consisting of three factors at three levels, with twenty-seven calculations in total). Based on the results of these calculations, a regression model was developed to assess the circular deformation of the pipe’s outer surface depending on the thickness of the bandage, the thickness of the pipe, and the internal pressure. The FEM calculations were found to be in close agreement with analytical results.

This study intends to evaluate the ratcheting response of biological samples prepared from bovine and porcine trabecular bone, articular cartilage, meniscus, and skin tissues and tested under asymmetric (nonzero mean stress) cycles. Meniscus and skin samples were tested with stress ratios of [Formula: see text] and [Formula: see text], respectively, while other tissues were tested at [Formula: see text]. Experimental ratcheting data and related influential parameters including stress level, stress rate, and testing frequency were discussed. A parametric ratcheting equation was further calibrated to estimate the ratcheting response of tissues. The predicted ratcheting data were found to be in close agreement with the reported experimental data.