pressure changes
Recently Published Documents

ABSTRACT Relationships between the weather and earthquakes have been suspected for over 2400 yr. However, scientific evidence to support such relationships has grown only since the 1980s. Because faults in Earth’s crust are generally regarded as critically stressed, small changes in stress and pore-fluid pressure brought about by rainfall, snow, and atmospheric pressure and temperature variations have all been proposed to modulate seismicity at local and regional scales. Elastic static stress changes as low as 0.07 kPa and pore-fluid pressure changes as low as 0.5 kPa have been proposed to naturally trigger earthquakes. In the UK, the spatial distributions of onshore earthquakes and rainfall are highly nonuniform and may be related; the wetter and most naturally seismically active areas occur on the west side of the country. We found significant spatial and temporal relationships between rainfall amount and the number of earthquakes for 1980–2012, suggesting larger volumes of rainfall promote earthquake nucleation. Such relationships occur when human-induced seismicity is included or excluded, indicating that meteorological conditions can also modulate seismicity induced by subsurface anthropogenic activities such as coal mining. No significant relationships were observed for monthly time lags, suggesting that the triggering effect of rainfall in the UK is near-instantaneous or occurs within 1 mo. With global climate changing rapidly and extreme weather events occurring more frequently, it is possible that some global regions may also experience changes in the spatial and temporal occurrence of earthquakes in response to changes in meteorologically induced stress perturbations.

AbstractBy using the temperature dependence of viscosity, we introduce a novel type of microfluidic lab-on-a-chip back pressure regulator (BPR) that can be integrated into a micro-total-analysis-system. A BPR is an important component used to gain pressure control and maintain elevated pressures in e.g. chemical extractions, synthesis, and analyses. Such applications have been limited in microfluidics, since the back pressure regularly has been attained by passive restrictors or external large-scale BPRs. Herein, an active microfluidic BPR is presented, consisting of a glass chip with integrated thin-film heaters and thermal sensors. It has no moving parts but a fluid restrictor where the flow resistance is controlled by the change of viscosity with temperature. Performance was evaluated by regulating the upstream pressure of methanol or water using a PID controller. The developed BPR has the smallest reported dead volume of 3 nL and the thermal actuation has time constants of a few seconds. The pressure regulation were reproducible with a precision in the millibar range, limited by the pressure sensor. The time constant of the pressure changes was evaluated and its dependence of the total upstream volume and the compressibility of the liquids is introduced.

AbstractTo mitigate the global warming crisis, one of the effective ways is to capture CO2 at an emitting source and inject it underground in saline aquifers, depleted oil and gas reservoirs, or in coal beds. This process is known as carbon capture and storage (CCS). With CCS, CO2 is considered a waste product that has to be disposed of properly, like sewage and other pollutants. While and after CO2 injection, monitoring of the CO2 storage site is necessary to observe CO2 plume movement and detect potential leakage. For CO2 monitoring, various physical property changes are employed to delineate the plume area and migration pathways with their pros and cons. We introduce a new rock physics model to facilitate the time-lapse estimation of CO2 saturation and possible pressure changes within a CO2 storage reservoir based on physical properties obtained from the prestack seismic inversion. We demonstrate that the CO2 plume delineation, saturation, and pressure changes estimations are possible using a combination of Acoustic Impedance (AI) and P- to S-wave velocity ratio (Vp/Vs) inverted from time-lapse or four-dimensional (4D) seismic. We assumed a scenario over a period of 40 years comprising an initial 25 year injection period. Our results show that monitoring the CO2 plume in terms of extent and saturation can be carried out using our rock physics-derived method. The suggested method, without going into the elastic moduli level, handles the elastic property cubes, which are commonly obtained from the prestack seismic inversion. Pressure changes quantification is also possible within un-cemented sands; however, the stress/cementation coefficient in our proposed model needs further study to relate that with effective stress in various types of sandstones. The three-dimensional (3D) seismic usually covers the area from the reservoir's base to the surface making it possible to detect the CO2 plume's lateral and vertical migration. However, the comparatively low resolution of seismic, the inversion uncertainties, lateral mineral, and shale property variations are some limitations, which warrant consideration. This method can also be applied for the exploration and monitoring of hydrocarbon production.

AbstractThe 660-kilometre seismic discontinuity is the boundary between the Earth’s lower mantle and transition zone and is commonly interpreted as being due to the dissociation of ringwoodite to bridgmanite plus ferropericlase (post-spinel transition)1–3. A distinct feature of the 660-kilometre discontinuity is its depression to 750 kilometres beneath subduction zones4–10. However, in situ X-ray diffraction studies using multi-anvil techniques have demonstrated negative but gentle Clapeyron slopes (that is,  the ratio between pressure and temperature changes) of the post-spinel transition that do not allow a significant depression11–13. On the other hand, conventional high-pressure experiments face difficulties in accurate phase identification due to inevitable pressure changes during heating and the persistent presence of metastable phases1,3. Here we determine the post-spinel and akimotoite–bridgmanite transition boundaries by multi-anvil experiments using in situ X-ray diffraction, with the boundaries strictly based on the definition of phase equilibrium. The post-spinel boundary has almost no temperature dependence, whereas the akimotoite–bridgmanite transition has a very steep negative boundary slope at temperatures lower than ambient mantle geotherms. The large depressions of the 660-kilometre discontinuity in cold subduction zones are thus interpreted as the akimotoite–bridgmanite transition. The steep negative boundary of the akimotoite–bridgmanite transition will cause slab stagnation (a stalling of the slab’s descent) due to significant upward buoyancy14,15.

Abstract Introduction The treatment of hydrocephalus has been a topic of intense research ever since the first clinically successful use of a valved cerebrospinal fluid shunt 72 years ago. While ample studies elucidating different phenomena impacting this treatment exist, there are still gaps to be filled. Specifically, how intracranial, intrathecal, arterial, and venous pressures react and communicate with each other simultaneously. Methods An in-vivo sheep trial (n = 6) was conducted to evaluate and quantify the communication existing within the cranio-spinal, arterial, and venous systems (1 kHz sampling frequency). Standardized intrathecal infusion testing was performed using an automated infusion apparatus, including bolus and constant pressure infusions. Bolus infusions entailed six lumbar intrathecal infusions of 2 mL Ringer’s solution. Constant pressure infusions were comprised of six regulated pressure steps of 3.75 mmHg for periods of 7 min each. Mean pressure reactions, pulse amplitude reactions, and outflow resistance were calculated. Results All sheep showed intracranial pressure reactions to acute increases of intrathecal pressure, with four of six sheep showing clear cranio-spinal communication. During bolus infusions, the increases of mean pressure for intrathecal, intracranial, arterial, and venous pressure were 16.6 ± 0.9, 15.4 ± 0.8, 3.9 ± 0.8, and 0.1 ± 0.2 mmHg with corresponding pulse amplitude increases of 2.4 ± 0.3, 1.3 ± 0.3, 1.3 ± 0.3, and 0.2 ± 0.1 mmHg, respectively. During constant pressure infusions, mean increases from baseline were 14.6 ± 3.8, 15.5 ± 4.2, 4.2 ± 8.2, and 3.2 ± 2.4 mmHg with the corresponding pulse amplitude increases of 2.5 ± 3.6, 2.5 ± 3.0, 7.7 ± 4.3, and 0.7 ± 2.0 mmHg for intrathecal, intracranial, arterial, and venous pulse amplitude, respectively. Outflow resistances were calculated as 51.6 ± 7.8 and 77.8 ± 14.5 mmHg/mL/min for the bolus and constant pressure infusion methods, respectively—showing deviations between the two estimation methods. Conclusions Standardized infusion tests with multi-compartmental pressure recordings in sheep have helped capture distinct reactions between the intrathecal, intracranial, arterial, and venous systems. Volumetric pressure changes in the intrathecal space have been shown to propagate to the intraventricular and arterial systems in our sample, and to the venous side in individual cases. These results represent an important step into achieving a more complete quantitative understanding of how an acute rise in intrathecal pressure can propagate and influence other systems.