flow manipulation
Recently Published Documents

Applying a constant electric field on a suspended film of liquid that carries an electric current, either by the transport of ions or surface charges, induces a rotation in the film. This system is known as “liquid film motor”. So far, the effect of permittivity of the liquid on its rotation has been ignored. We showed that the permittivity of the liquid can significantly affect the dynamics of rotation. Using an experimental approach, we studied the liquid film rotation for a broad range of pure liquids with diverse permittivities and surface tensions. We observed two different regimes of rotation depending on the permittivity of the liquids. We also found that there is no correlation between the surface tension of the liquid and the angular velocity of the rotation. We considered a theoretical framework and suggested scenarios to explain our experimental observations. These results help in better understanding the physics of liquid film motors and suggest opportunities for new flow manipulation techniques at small scales.

Hydrologic currents and swimming behavior influence routing and survival of emigrating Chinook salmon in branched migratory corridors. Behavioral particle-tracking models (PTM) of Chinook salmon can estimate migration paths of salmon using the combination of hydrodynamic velocity and swimming behavior. To test our hypotheses of the importance of management, models can simulate historical conditions and alternative management scenarios such as flow manipulation and modification of channel geometry. Swimming behaviors in these models are often specified to match aggregated observed properties such as transit time estimated from acoustic telemetry data. In our study, we estimate swimming behaviors at 5 s intervals directly from acoustic telemetry data and concurrent high-resolution three-dimensional hydrodynamic model results at the junction of the San Joaquin River and Old River in the Sacramento-San Joaquin Delta, California. We use the swimming speed dataset to specify a stochastic swimming behavior consistent with observations of instantaneous swimming. We then evaluate the effect of individual components of the swimming formulation on predicted route selection and the consistency with observed route selection. The PTM predicted route selection fractions are similar among passive and active swimming behaviors for most tags, but the observed route selection for some tags would be unlikely under passive behavior leading to the conclusion that active swimming behavior influenced the route selection of several tagged smolts.

Abstract Colloid removal in water treatment plants is commonly done by a sequence of processes that includes coagulation, flocculation, sedimentation, and filtration. The current study presents an innovative technique, termed grouping, for the removal of these suspended particles based on physical flow manipulation, which causes the particles to aggregate. Previous results showed that gentle oscillation in a cylindrical container facilitates simultaneous flocculation and sedimentation in the same reactor over shorter periods of time than are possible using the conventional treatment approach. This finding may confer marked improvements on the processes used today by enabling the use of both smaller reactors and less energy. Based on the findings with the cylindrical vessel, here the grouping technique is further examined in a rectangular container and over a range of different initial turbidities. The results indicate that the removal efficiency is higher in the rectangular container under the different initial turbidities tested. In addition, the removal efficiency was shown to remain robust with the decreases in initial turbidity and alum concentrations that occur during treatment. The positive results of our previous study taken together with this finding hint at the strong potential of the grouping technique to improve common flocculation processes.

Recently, remarkable developments have taken place, leading to significant improvements in microfluidic methods to capture subtle biological effects down to single cells. As microfluidic devices are getting sophisticated, design optimization through experimentations is becoming more challenging. As a result, numerical simulations have contributed to this trend by offering a better understanding of cellular microenvironments hydrodynamics and optimizing the functionality of the current/emerging designs. The need for new marketable designs with advantageous hydrodynamics invokes easier access to efficient as well as time-conservative numerical simulations to provide screening over cellular microenvironments, and to emulate physiological conditions with high accuracy. Therefore, an excerpt overview on how each numerical methodology and associated handling software works, and how they differ in handling underlying hydrodynamic of lab-on-chip microfluidic is crucial. These numerical means rely on molecular and continuum levels of numerical simulations. The current review aims to serve as a guideline for researchers in this area by presenting a comprehensive characterization of various relevant simulation techniques.

Paper-based microfluidic devices have advanced significantly in recent years as they are affordable, automated with capillary action, portable, and biodegradable diagnostic platforms for a variety of health, environmental, and food quality applications. In terms of commercialization, however, paper-based microfluidics still have to overcome significant challenges to become an authentic point-of-care testing format with the advanced capabilities of analyte purification, multiplex analysis, quantification, and detection with high sensitivity and selectivity. Moreover, fluid flow manipulation for multistep integration, which involves valving and flow velocity control, is also a critical parameter to achieve high-performance devices. Considering these limitations, the aim of this review is to (i) comprehensively analyze the fabrication techniques of microfluidic paper-based analytical devices, (ii) provide a theoretical background and various methods for fluid flow manipulation, and iii) highlight the recent detection techniques developed for various applications, including their advantages and disadvantages.

The use of streamwise finlets as a passive flow and aerodynamic noise-control technique is considered in this paper. A comprehensive experimental investigation is undertaken using a long flat plate, and results are presented for the boundary layer and surface pressure measurements for a variety of surface treatments. The pressure–velocity coherence results are also presented to gain a better understanding of the effects of the finlets on the boundary layer structures. The results show that the flow behaviour downstream of the finlets is strongly dependent on the finlet spacing. The use of finlets with coarse spacing leads to a reduction in pressure spectrum at mid- to high frequencies and an increase in spanwise length scale in the trailing-edge region due to flow channelling effects. For the finely distributed finlets, the flow is observed to behave similarly to that of a permeable backward-facing step, with significant suppression of the high-frequency pressure fluctuations but an elevation at low frequencies. Furthermore, the convection velocity is observed to reduce downstream of all finlet treatments. The trailing-edge surface pressure spectrum results have shown that, in order to obtain maximum unsteady pressure reduction, the finlet spacing should be of the order of the thickness of the inner layer of the boundary layer. A thorough study is provided for understanding of the underlying physics of both categories of finlets and their implications for controlling the flow and noise generation mechanism near the trailing edge.