floating car data
Recently Published Documents

This paper focuses on the estimation of energy consumption of Electric Vehicles (EVs) by means of models derived from traffic flow theory and vehicle locomotion laws. In particular, it proposes a bi-level procedure with the aim to calibrate (or update) the whole parameters of traffic flow models and energy consumption laws by means of Floating Car Data (FCD) and probe vehicle data. The reported models may be part of a procedure for designing and planning transport and energy systems. This aim is to verify if, and in what amount, the existing parameters of the resistances/energy consumptions model calibrated in the literature for Internal Combustion Engines Vehicles (ICEVs) change for EVs, considering the above circular dependency between supply, demand, and supply–demand interaction. The final results concern updated parameters to be used for eco-driving and eco-routing applications for design and a planning transport system adopting a multidisciplinary approach. The focus of this manuscript is on the transport area. Experimental data concern vehicular data extracted from traffic (floating car data and probe vehicle data) and energy consumption data measured for equipped EVs performing trips inside a sub-regional area, located in the Città Metropolitana of Reggio Calabria (Italy). The results of the calibration process are encouraging, as they allow for updating parameters related to energy consumption and energy recovered in terms of EVs obtained from data observed in real conditions. The latter term is relevant in EVs, particularly on urban routes where drivers experience unstable traffic conditions.

Abstract. Traffic congestion is a dynamic spatial and temporal process and as such might not be possible to model with linear functions of various dependent variables. That leaves a lot of space for non-linear approximates, such as neutral networks and fuzzy logic. In this paper, the focus is on the fuzzy logic as a possible approach for dealing with the problems of measuring traffic congestion. We investigate the application of this framework on a selected case study, and use floating car data (FCD) collected in Augsburg, Germany. A fuzzy inference system is built to detect degrees of congestion on a federal highway B17. With FCD, it is possible to obtain local speed information on almost all parts of the network. This information, together with collected vehicle location, time and heading, can be further processed and transformed into valuable information in the form of trip routes, travel times, etc. Initial results are compared with traditional method of expressing levels of congestion on a road network e.g. Level of Service – LOS. The fuzzy model, with segmented mean speed and travel time parameters, performed well and showed to be promising approach to detect traffic congestions. This approach can be further improved by involving more input parameters, such as density or vehicle flow, which might reflect traffic congestion event even more realistically.

This paper investigates the opportunities offered by floating car data (FCD) to infer delivering activities. A discrete trip-chain order model (within the random utility theory) for light goods vehicles (laden weight less than 3.5 tons) is hence proposed, which characterizes delivery tours in terms of the number of stops/deliveries performed. Thus, the main goal of the study is to calibrate a discrete choice model to estimate the number of stops/deliveries per tour by using FCD, which can be incorporated in a planning procedure for obtaining a preliminary assessment of parking demand. The data used refer to light goods vehicles operating in the Veneto region. The database contains more than 8000 tours undertaken in 60 working days. Satisfactory results have been obtained in terms of tour estimation and model transferability.

Urban air quality in cities is strongly influenced by road traffic emissions. Micro-scale models have often been used to evaluate the pollutant concentrations at the scale of the order of meters for estimating citizen exposure. Nonetheless, retrieving emissions information with the required spatial and temporal details is still not an easy task. In this work, we use our modelling system PMSS (Parallel Micro Swift Spray) with an emission dataset based on Floating Car Data (FCD), containing hourly data for a large number of road links within a 1 × 1 km2 domain in the city of Rome for the month of May 2013. The procedures to obtain both the emission database and the PMSS simulations are hosted on CRESCO (Computational Centre for Research on Complex Systems)/ENEAGRID HPC facilities managed by ENEA. The possibility of using such detailed emissions, coupled with HPC performance, represents a desirable goal for microscale modeling that can allow such modeling systems to be employed in quasi-real time and nowcasting applications. We compute NOx concentrations obtained by: (i) emissions coming from prescribed hourly modulations of three types of roads, based on vehicle flux data in the FCD dataset, and (ii) emissions from the FCD dataset integrated into our modelling chain. The results of the simulations are then compared to concentrations measured at an urban traffic station.