retaining wall
Recently Published Documents

The failure of locked segment-type slopes is often affected by rainfall, earthquake, and other external loads. Rainfall scours the slope and weakens the mechanical properties of rock-soil mass. At the same time, rainfall infiltrates into cracks of slope rock mass. Under the action of in situ stress, hydraulic fracturing leads to the development and expansion of rock cracks, which increases the risk of slope instability. Under seismic force, the slope will be subjected to large horizontal inertial force, resulting in slope instability. In this paper, a self-developed loading device was used to simulate the external loads such as rainfall and earthquake, and the model tests are carried out to study the evolution mechanism of landslide with retaining wall locked segment. Three-dimensional laser scanner, microearth pressure sensors, and high-definition camera are applied for the high-precision monitoring of slope shape, deformation, and stress. Test results show that the retaining wall locked segment has an important control effect on landslide stability. The characteristics of deformation evolution and stress response of landslide with retaining wall locked segment are analyzed and studied by changing the slope shape, earth pressure, and the displacement cloud map. The evolutionary process of landslide with retaining wall locked segment is summarized. Experimental results reveal that as the landslide with retaining wall locked segment is at failure, the upper part of the landslide thrusts and slides and the retaining wall produces a locking effect; the middle part extrudes and uplifts, which is accompanied with shallow sliding; and compression-shear fracture of the locked segment leads to the landslide failure.

AbstractA reasonable method is proposed to calculate the active earth pressure of finite soils based on the drum deformation mode of the flexible retaining wall close to the basement’s outer wall. The flexible retaining wall with cohesionless sand is studied, and the ultimate failure angle of finite soils close to the basement’s outer wall is obtained using the Coulomb theory. Soil arch theory is led to get the earth pressure coefficient in the subarea using the trace line of minor principal stress of circular arc after stress deflection. The soil layers at the top and bottom part of the retaining wall are restrained when the drum deformation occurs, and the soil layers are in a non-limit state. The linear relationship between the wall movement’s magnitude and the mobilization of the internal friction angle and the wall friction anger is presented. The level layer analysis method is modified to propose the resultant force of active earth pressure, the action point’s height, and the pressure distribution. Model tests are carried out to emulate the process of drum deformation and soil rupture with limited width. Through image analysis, it is found that the failure angle of soil within the limited width is larger than that of infinite soil. With the increase of the aspect ratio, the failure angle gradually reduces and tends to be constant. Compared with the test results, it is shown that the horizontal earth pressure reduces with the reduction of the aspect ratio within critical width, and the resultant force decreases with the increase of the limit state region under the same ratio. The middle part of the distribution curve is concave. The active earth pressure strength decreases less than Coulomb’s value, the upper and lower soil layers are in the non-limit state, and the active earth pressure strength is more than Coulomb’s value.

Abstract Ensuring the safety of existing structures is an important issue when planning and executing adjacent new foundation pit excavations. Hence, understanding the stress state conditions experienced by the soil element behind a retaining wall at a given location during different excavation stages has been a key observational modelling aspect of the performance of excavations. By establishing and carrying out sophisticated soil–structure interaction analyses, stress paths render clarity on soil deformation mechanism. On the other hand, column-type soft ground treatment has recently got exceeding attention and practical implementation. So, the soil stress–strain response to excavation-induced disturbances needs to be known as well. To this end, this paper discusses the stress change and redistribution phenomena in a treated ground based on 3D numerical analyses. The simulation was verified against results from a 1 g indoor experimental test conducted on composite foundation reinforced with long and short cement–fly ash–gravel (CFG) pile adjacent to a moving rigid retaining wall. It was observed that the stress path for each monitoring point in the shallow depth undergoes a process of stress unloading at various dropping amounts of principal stress components in a complex manner. The closer the soil element is to the wall, the more it experiences a change in principal stress components as the wall movement progresses; also, the induced stress disturbance weakens significantly as the observation point becomes farther away from the wall. Accordingly, the overall vertical load-sharing percentage of the upper soil reduces proportionally.

<p>The Sukabumi (Baros) – Sagaranten Km Bdg 115+200 road section which is located in Sukabumi Regency is a road section for the province of West Java. Because the road is always damaged due to being eroded by water infiltration in the rice fields that seeps into the road body area at that location and the soil at that location tends to be unstable based on the results of lab tests having a shear angle value of 4.99ᵒ and having a specific gravity of 17.45, then it is carried out analysis of the existing damaged retaining wall and the design of a new gabion-type retaining wall at that location. The gabion retaining wall building will be designed with 3 designs, the first using a stone volume of 13 m3, the second using a stone volume of 8 m3 and the third using a stone volume of 6.5 m3. Based on the results of the calculation analysis using Rankine theory, it was found that the existing retaining wall was unable to withstand the shearing force which got a check value of 1.18 which should have a value of SF &gt; 1.5, while the 3 gabion plan buildings got the appropriate SF value, namely against the overturning force, shear force and soil bearing capacity.</p>

Abstract Variation laws of earth pressure accounting for the displacement of are taining wall can be well described by mathmatical fitting in the study of the relationship between earth pressure and retaining wall displacement. The common mathematical function expressions of earth pressure displacement of retaining wall can be divided into sinusoidal function model, exponential like function model, hyperbolic function model, fitting function and semi-numerical and semi-analytical model function, etc. The characteristics and shortcomings of the current expression of earth pressure displacement function are summarized. Then combined with the field test and model test, the applicability and characteristics of various mathematical functions in predicting the displacement of earth pressure with retaining structures are analyzed. The results show that when the displacement is small, the sinusoidal function model and the quasi-exponential function model are close to the measured results. When the displacement of retaining structure is large, the fitting results of hyperbolic model and semi-numerical and semi-analytical model are better. For the prediction of earth pressure displacement relationship in passive area, the buried depth has a great influence. And the error between the theoretical value and the actual value has a great influence on the fitting result of the model.