reversible phase transition
Recently Published Documents

This paper reported the new polishing technique by using a shear thickening fluid (STF). In experiments, the steel workpiece was immersed into the STF under the static condition. When the workpiece started rotating at a certain speed, the surrounding STF became solidified due to the shear thickening effect. Consequently, the solidified STF held the abrasive particles and polished the surfaces of the workpiece. The surface roughness of the treated surfaces was clearly dependent on the size of the abrasive particles. Owing to the reversible phase transition between liquid and solid status for the STF, the polishing process can be conducted without the use of polishing pads. Moreover, the new polishing technique using the STF can polish some complex structures having the surfaces with different heights and/or orientations, which cannot be achieved by the traditional one-step polishing method.

The structural stability of vanadinite, Pb5[VO4]3Cl, is reported by high-pressure experiments using synchrotron radiation X-ray diffraction (XRD) and Raman spectroscopy. XRD experiments were performed up to 44.6 GPa and 700 K using an externally-heated diamond anvil cell (EHDAC), and Raman spectroscopy measurements were performed up to 26.8 GPa at room temperature. XRD experiments revealed a reversible phase transition of vanadinite at 23 GPa and 600 K, which is accompanied by a discontinuous volume reduction and color change of the mineral from transparent to reddish during compression. The high-pressure Raman spectra of vanadinite show apparent changes between 18.0 and 22.8 GPa and finally become amorphous at 26.8 GPa, suggesting structural transitions of this mineral upon compression. The structural changes can be distinguished by the emergence of a new vibrational mode that can be attributed to the distortion of [VO4] and the larger distortion of the V–O bonds, respectively. The [VO4] internal modes in vanadinite give isothermal mode Grüneisen parameters varying from 0.149 to 0.286, yielding an average VO4 internal mode Grüneisen parameters of 0.202.

The structure of the naturally occurring, iron-rich mineral Ca1.08(6)Mg0.24(2)Fe0.64(4)Mn0.04(1)(CO3)2 ankerite was studied in a joint experimental and computational study. Synchrotron X-ray powder diffraction measurements up to 20 GPa were complemented by density functional theory calculations. The rhombohedral ankerite structure is stable under compression up to 12 GPa. A third-order Birch–Murnaghan equation of state yields V0 = 328.2(3) Å3, bulk modulus B0 = 89(4) GPa, and its first-pressure derivative B’0 = 5.3(8)—values which are in good agreement with those obtained in our calculations for an ideal CaFe(CO3)2 ankerite composition. At 12 GPa, the iron-rich ankerite structure undergoes a reversible phase transition that could be a consequence of increasingly non-hydrostatic conditions above 10 GPa. The high-pressure phase could not be characterized. DFT calculations were used to explore the relative stability of several potential high-pressure phases (dolomite-II-, dolomite-III- and dolomite-V-type structures), and suggest that the dolomite-V phase is the thermodynamically stable phase above 5 GPa. A novel high-pressure polymorph more stable than the dolomite-III-type phase for ideal CaFe(CO3)2 ankerite was also proposed. This high-pressure phase consists of Fe and Ca atoms in sevenfold and ninefold coordination, respectively, while carbonate groups remain in a trigonal planar configuration. This phase could be a candidate structure for dense carbonates in other compositional systems.

Metal-organic framework (MOF) based stimuli-responsive polymers (coordination polymers) exhibit reversible phase-transition behavior and demonstrate attractive properties that are capable of altering physical and/or chemical properties upon exposure to external stimuli, including pH, temperature, ions, etc., in a dynamic fashion. Thus, their conformational change can be imitated by the adsorption/desorption of target analytes (guest molecules), temperature or pressure changes, and electromagnetic field manipulation. MOF-based stimuli responsive polymers have received great attention due to their advanced optical properties and variety of applications. Herein, we summarized some recent progress on MOF-based stimuli-responsive polymers (SRPs) classified by physical and chemical responsiveness, including temperature, pressure, electricity, pH, metal ions, gases, alcohol and multi-targets.