nonlocal elasticity theory
Recently Published Documents

This paper presents the effects of temperature and the nonlocal coefficient on the bending response of functionally graded (FG) nanoplates embedded in an elastic foundation in a thermal environment. The effects of transverse normal strain, as well as transverse shear strains, are considered where the variation of the material properties of the FG nanoplate are considered only in thickness direction. Unlike other shear and deformations theories in which the number of unknown functions is five and more, the present work uses shear and deformations theory with only four unknown functions. The four-unknown normal and shear deformations model, associated with Eringen nonlocal elasticity theory, is used to derive the equations of equilibrium utilizing the principle of virtual displacements. The effects due to nonlocal coefficient, side-to-thickness ratio, aspect ratio, normal and shear deformations, thermal load and elastic foundation parameters, as well as the gradation in FG nanoplate bending, are investigated. In addition, for validation, the results obtained from the present work are compared to ones available in the literature.

The existence of chaos in the lateral vibration of the carbon nanotube (CNT) can contribute to source of instability and inaccuracy within the nano mechanical systems. So, chaotic vibrations of a simply supported CNT which is subjected to a traversing harmonic force are studied in this paper. The model of the system is formulated by using nonlocal Euler–Bernoulli beam theory. The equation of motion is solved using the Rung–Kutta method. The effects of the nonlocal parameter, velocity and amplitude of the traversing harmonic force on the nonlinear dynamic response of the system are analyzed by the bifurcation diagrams, phase plane portrait, power spectra analysis, Poincaré map and the maximum Lyapunov exponent. The results indicate that the nonlocal parameter, velocity and amplitude of the traversing harmonic force have considerable effects on the bifurcation behavior and can be used as effective control parameters for avoiding chaos.

In this paper, an analytical approach for wrinkling analysis of double nanofilms embedded in compliant substrates is presented. The governing differential equations for wrinkling of double nanofilms are derived based on Eringen’s nonlocal elasticity theory and the classical plate theory (CLPT). Substrates are regarded as elastic bodies of finite thickness and the normal pressure of substrates on the films is assumed to be linear with the lateral deformation of the films. Solutions for critical wrinkling load and wave number are computed in terms of the nonlocal parameter, the elastic properties and thickness of double nanofilms, the elastic properties and thickness of the substrates, and wrinkle modes. The parametric study shows that the dimensionless critical wave number and the dimensionless critical load decrease gradually with the increase of the nonlocal parameter. Four typical wrinkling states are studied: in-phase wrinkling, out-of-phase wrinkling, single-film wrinkling and asymmetric wrinkling. In-phase wrinkling has the highest chance to occur among four wrinkle modes. In addition, the results show that the dimensionless critical load and wave number are much smaller when the films become much stiffer and thinner than the substrates.

Abstract In this article, we explore a three-dimensional solid isogeometric analysis (3D-IGA) approach based on a nonlocal elasticity theory to investigate size effects on natural frequency and critical buckling load for multi-directional functionally graded (FG) nanoshells. The multi-directional FG material uses a power law rule with three power exponent indexes concerning three parametric coordinates. Nanoshell's geometries include the square plate, cylindrical and spherical panels with the side length considered in a nanoscale. Because 3D-IGA utilizes an approximation of NURBS basic functions to integrate from geometry modeling to discretized domain, it is the best promising candidate to fulfill a higher-order derivative requirement of the nonlocal theory on nanoshells. The numerical solutions are verified by those published in several pieces of literature to determine the current approach's accuracy and reliability. After a convergence solution is examined, a quartic NURBS basic function can yield ultra-converged and high-accurate results with a low computational cost. The findings show the size effect parameters which significantly impact the frequencies and the critical buckling factors of the multi-directional FG nanoshells. Generally, increases in the size effect parameters will cause declines in the frequencies and the critical buckling factors of the nanoshells.

The free vibration of rotating functionally graded nanobeams under different boundary conditions is studied based on nonlocal elasticity theory within the framework of Euler-Bernoulli and Timoshenko beam theories. The thickness-wise material gradient variation of the nanobeam is considered. By introducing a second-order axial shortening term into the displacement field, the governing equations of motion of the present new nonlocal model of rotating nanobeams are derived by the Hamilton’s principle. The nonlocal differential equations are solved through the Galerkin method. The present nonlocal models are validated through the convergence and comparison studies. Numerical results are presented to investigate the influences of the nonlocal parameter, angular velocity, material gradient variation together with slenderness ratio on the vibration of rotating FG nanobeams with different boundary conditions. Totally different from stationary nanobeams, the rotating nanobeams with relatively high angular velocity could produce larger fundamental frequencies than local counterparts. Additionally, the axial stretching-transverse bending coupled vibration is perfectly shown through the frequency loci veering and modal conversion.

This paper presents a study on wave propagation in rotating functionally graded (FG) microbeams reinforced by graphene nanoplatelets (GPLs). The graphene nanoplatelets (GPLs) are considered to distribute in the diameter direction of the micro-beam in a gradient pattern, which leads to the functionally graded structure. By using the Halpin-Tsai micromechanics model and the rule of mixture, the effective material properties of the microbeam are determined. According to the Euler-Bernoulli beam theory and nonlocal elasticity theory, the rotating microbeams are modeled. A comprehensive parametric study is conducted to examine the effects of rotating speed, GPL distribution pattern, GPL length-to-thickness ratio, GPL length-to-width ratio, and nonlocal scale on the wavenumber, phase speed and group speed of the microbeam. The research findings can play an important role on the design of rotating graphene nanoplatelet (GPL) reinforced microbeams for better structural performance.

AbstractParametric vibrations of the single-layered graphene sheet (SLGS) are studied in the presented work. The equations of motion govern geometrically nonlinear oscillations. The appearance of small effects is analysed due to the application of the nonlocal elasticity theory. The approach is developed for rectangular simply supported small-scale plate and it employs the Bubnov–Galerkin method with a double mode model, which reduces the problem to investigation of the system of the second-order ordinary differential equations (ODEs). The dynamic behaviour of the micro/nanoplate with varying excitation parameter is analysed to determine the chaotic regimes. As well the influence of small-scale effects to change the nature of vibrations is studied. The bifurcation diagrams, phase plots, Poincaré sections and the largest Lyapunov exponent are constructed and analysed. It is established that the use of nonlocal equations in the dynamic analysis of graphene sheets leads to a significant alteration in the character of oscillations, including the appearance of chaotic attractors.