laser cavity
Recently Published Documents

Semiconductor lasers can exhibit complex dynamical behavior in the presence of external perturbations. Delayed optical feedback, re-injecting part of the emitted light back into the laser cavity, in particular, can destabilize the laser’s emission. We focus on the emission properties of a semiconductor laser subject to such optical feedback, where the delay of the light re-injection is large compared to the relaxation oscillations period. We present an overview of the main dynamical features that emerge in semiconductor lasers subject to delayed optical feedback, emphasizing how to experimentally characterize these features using intensity and high-resolution optical spectra measurements. The characterization of the system requires the experimentalist to be able to simultaneously measure multiple time scales that can be up to six orders of magnitude apart, from the picosecond to the microsecond range. We highlight some experimental observations that are particularly interesting from the fundamental point of view and, moreover, provide opportunities for future photonic applications.

To increase the spectral efficiency of coherent communication systems, lasers with ever-narrower linewidths are required as they enable higher-order modulation formats with lower bit-error rates. In particular, semiconductor lasers are a key component due to their compactness, low power consumption, and potential for mass production. In field-testing scenarios their output is coupled to a fiber, making them susceptible to external optical feedback (EOF). This has a detrimental effect on its stability, thus it is traditionally countered by employing, for example, optical isolators and angled output waveguides. In this work, EOF is explored in a novel way with the aim to reduce and stabilize the laser linewidth. EOF has been traditionally studied in the case where it is applied to only one side of the laser cavity. In contrast, this work gives a generalization to the case of feedback on both sides. It is implemented using photonic components available via generic foundry platforms, thus creating a path towards devices with high technology-readiness level. Numerical results shows an improvement in performance of the double-feedback case with respect to the single-feedback case. In particularly, by appropriately selecting the phase of the feedback from both sides, a broad stability regime is discovered. This work paves the way towards low-cost, integrated and stable narrow-linewidth integrated lasers.

Ultrafast laser oscillators are indispensable tools for diverse applications in scientific research and industry. When the phases of the longitudinal laser cavity modes are locked, pulses as short as a few femtoseconds can be generated. As most high-power oscillators are based on narrow-bandwidth materials, the achievable duration for high-power output is usually limited. Here, we present a distributed Kerr lens mode-locked Yb:YAG thin-disk oscillator which generates sub-50 fs pulses with spectral widths far broader than the emission bandwidth of the gain medium at full width at half maximum. Simulations were also carried out, indicating good qualitative agreement with the experimental results. Our proof-of-concept study shows that this new mode-locking technique is pulse energy and average power scalable and applicable to other types of gain media, which may lead to new records in the generation of ultrashort pulses.

Abstract The linear absorption in erbium-doped fiber contributes to its excellent role in erbium-doped fiber amplifiers and lasers. A nonlinear optical contribution in the absorption of erbium-doped fiber is responsible for optical bistable action when it is present in a laser cavity. To quantify this effect, the variation of absorption coefficient is measured at different signal powers at multiple wavelengths in the C-band for different EDF lengths, and saturable absorption parameters such as the saturation power are extracted. Then the modification in the output characteristics of erbium-doped fiber ring laser with change in fiber length and in the presence of self-induced saturable absorption effect within the gain medium which leads to optical bistability is measured. By comparing the measured parameters obtained from saturable absorption in erbium-doped fiber and optical bistability in erbium-doped fiber ring laser, we estimated the length of the gain medium which acts as the saturable absorber inside the cavity of the laser. This is useful in constructing bistable lasers with optimized conditions. The temporal evolution of cavity loss and gain with the intra-cavity power and up- and down-thresholds helps in understanding why the down-threshold will be lesser than the up-threshold in bistable laser systems.

Abstract This work aims to measure the liquid level and temperature at the same time. We propose a fiber laser based on Bragg grating (FBG) and a long-period fiber grating (LPFG) for simultaneously two-parameter sensing. It has one wavelength peak induced by the FBG and one central dip induced by the LPFG. The resulting temperature varies from 25 °C to 50 °C in 7.5 nm wavelength drifts of LPFG with linearity R 2 of 0.9994. The sensitivity of the FBG liquid level sensing will be affected by the temperature change, ranging from—0.12 nm cm−1 at low temperature to—0.004 nm cm−1 at high temperature, and the linearity R 2 is about 0.9967. Thanks to the laser cavity, the proposed fiber laser with an extensive dynamic range could be used for remote monitoring.

AbstractMultimode fibres provide a promising platform for boosting the capacity of fibre links and the output power of fibre lasers. The complex spatiotemporal dynamics of multimode beams may be controlled in spatial and temporal domains via the interplay of nonlinear, dispersive and dissipative effects. Raman nonlinearity induces beam cleanup in long graded-index fibres within a laser cavity, even for CW Stokes beams pumped by highly-multimode laser diodes (LDs). This leads to a breakthrough approach for wavelength-agile high-power lasers. However, current understanding of Raman beam cleanup is restricted to a small-signal gain regime, being not applicable to describing realistic laser operation. We solved this challenge by experimentally and theoretically studying pump-to-Stokes beam conversion in a graded-index fibre cavity. We show that random mode coupling, intracavity filtering and Kerr self-cleaning all play a decisive role for the spatio-spectral control of CW Stokes beams. Whereas the depleted LD pump radiation remains insensitive to them.

Abstract We report on highly-efficient room-temperature lasing in 5at.%Tm:KLu(WO4)2 mini-slabs side-pumped by a 35W diode bar. QCW (duty cycle ∼ 14%) output power of 1.47 W at 1908 nm has been demonstrated with optical and slope efficiencies being of 33 and 43% respectively. In our experiments, we used samples of active elements produced in the slabs form with Brewster’s angle cut faces and original laser cavity design.

Abstract Pulses fiber laser had been successfully generated by using multi-wall carbon nanotubes thin film saturable absorber at room temperature. The saturable absorber is incorporated into a ring laser cavity. A stable Kelly sidebands mode-locked pulse spectrum with 1561.3 nm wavelength at the pump power of 86.8 mW. The repetition rate and pulse width of 12.3 MHz and 0.51 picosecond, respectively. A stable operation is observed for an hour at room temperature. These simple and reliable system features offer interesting research study especially in mode-locked pulse generation at 1.5 μm waveband.