access network
Recently Published Documents

The article to assesses whether it may be possible to recommend a solution to enable automation of the process of detection and fault management of common conclusive loss-of-connectivity last-mile outages, within the access network. To ascertain the utility of the research, UK based MPLS VPN managed service providers, their fault management staff and their business customers, were surveyed using online questionnaires for their views. UK public Internet users were additionally surveyed via five UK Internet forums. UK communication providers offering MPLS VPN solutions were characterised. Access network connectivity technologies and fault management functions were compared, contrasted and analysed. An aspiration for the solution to be beneficial to the largest potential population, meant that current non-proprietary Internet Standard technologies were selected, justified and identified which could be recommended for use. It was found that of the participating survey respondents, two-thirds were in favour of automation. Many current communication provider processes were found to be mostly automated. The article concludes with recommendations of how an automated solution could potentially be enabled. This involves further use of business-to-business interfacing between communication providers, automation of their Fault Management Systems and introducing Bi-Directional forwarding for detection between last-mile active network elements.

Machine Type Communication (MTC) has been emerging for a wide range of applications and services for the Internet of Things (IoT). In some scenarios, a large group of MTC devices (MTCDs) may enter the communication coverage of a new target base station simultaneously. However, the current handover mechanism specified by the Third Generation Partnership Project (3GPP) incur high signalling overhead over the access network and the core network for such scenario. Moreover, other existing solutions have several security problems in terms of failure of key forward secrecy (KFS) and lack of mutual authentication. In this paper, we propose an efficient authentication protocol for a group of MTCDs in all handover scenarios. By the proposal, the messages of two MTCDs are concatenated and sent by an authenticated group member to reduce the signalling cost. The proposed protocol has been analysed on its security functionality to show its ability to preserve user privacy and resist from major typical malicious attacks. It can be expected that the proposed scheme is applicable to all kinds of group mobility scenarios such as a platoon of vehicles or a high-speed train. The performance evaluation demonstrates that the proposed protocol is efficient in terms of computational and signalling cost.

Open RAN (radio access network) movement is perceived as a game changer, having robust potential to introduce shifts in mobile radio access networks towards tailor-made solutions based on the architecture decomposition. It is widely assumed that those changes will affect the approach to network deployments and supply chains of network elements and their further integration and maintenance. First deployments of O-RAN-based networks have already delivered broadband services to end users. In parallel, many proof-of-concept feature evaluations and theoretical studies are being conducted by academia and the industry. In this review, the authors describe the RAN evolution towards open models and make an attempt to indicate potential open RAN benefits and market trends.

Indoor wireless traffic increases exponentially. Radio over fibre technology has been used to provide broadband services in the access network. Plastic Optical Fibre (POF) has been considered as a promising waveguide to be used as backhaul link for indoor access network. The RoF system uses an improved POF cable as a backhaul. A photonic antenna is developed by integrating a microstrip patch antenna with an opto-electronic converter. A standard inset fed microstrip patch antenna used for the wireless transmission and reception is designed using CST software tool. A RoF communication system based on the developed POF is designed and simulated using Optisystem software tool. The Bit Error Rate (BER) performance of the system in terms of Quality factor is evaluated. A maximum achievable POF cable length of 117 m for an On-Off Keying (OOK) transmission data rate of 1 Gbps with an acceptable Quality factor of 7.0 is obtained.  When the developed RoF system was used to transmit 10 Gbps and 50 Gbps data, the achievable cable lengths reduced to 80 m and 63 m, respectively. Keywords— Plastic Optical Fibre, RoF, photonic antenna, and modal dispersion

As the rapid growth of mobile users and Internet-of-Everything devices will continue in the upcoming decade, more and more network capacity will be needed to accommodate such a constant increase in data volumes (DVs). To satisfy such a vast DV increase, the implementation of the fifth-generation (5G) and future sixth-generation (6G) mobile networks will be based on heterogeneous networks (HetNets) composed of macro base stations (BSs) dedicated to ensuring basic signal coverage and capacity, and small BSs dedicated to satisfying capacity for increased DVs at locations of traffic hotspots. An approach that can accommodate constantly increasing DVs is based on adding additional capacity in the network through the deployment of new BSs as DV increases. Such an approach represents an implementation challenge to mobile network operators (MNOs), which is reflected in the increased power consumption of the radio access part of the mobile network and degradation of network energy efficiency (EE). In this study, the impact of the expected increase of DVs through the 2020s on the EE of the 5G radio access network (RAN) was analyzed by using standardized data and coverage EE metrics. An analysis was performed for five different macro and small 5G BS implementation and operation scenarios and for rural, urban, dense-urban and indoor-hotspot device density classes (areas). The results of analyses reveal a strong influence of increasing DV trends on standardized data and coverage EE metrics of 5G HetNets. For every device density class characterized with increased DVs, we here elaborate on the process of achieving the best and worse combination of data and coverage EE metrics for each of the analyzed 5G BSs deployment and operation approaches. This elaboration is further extended on the analyses of the impact of 5G RAN instant power consumption and 5G RAN yearly energy consumption on values of standardized EE metrics. The presented analyses can serve as a reference in the selection of the most appropriate 5G BS deployment and operation approach, which will simultaneously ensure the transfer of permanently increasing DVs in a specific device density class and the highest possible levels of data and coverage EE metrics.

The problem of selecting a wireless access network in a highly heterogeneous environment has been analyzed and solved. A network selection model based on the analysis of a wireless network environment using a federated reinforcement machine learning system is proposed. A model has been developed to estimate the theoretical average capacity available to the user in a highly heterogenic access network. The effectiveness of the proposed method was evaluated using a series of experiments. The article is concluded with a discussion regarding the applicability of the proposed method for IMT-2020 and IMT-2030 networks.