quartz grains
Recently Published Documents

Abstract The results of studies of the technological capabilities of granular media made of natural material “Baykalit” in the conditions of vibration technological systems are presented. Baikalit is a siliceous rock-fine-grained quartzite (microquartzite) - with an aggregate structure of quartz grains measuring 1.5-3 microns with sharp boundaries between these very grains. The granules obtained as a result of crushing the mineral rock Baikalit have a sufficiently high hardness (at least 6.0 - 7.0 on the Mohs scale). The presence of many wedge-shaped vertices along the perimeter of the granules and the arbitrariness of the shape allows us to consider them as a universal cutting tool that has access to various surfaces of complexity. It is shown that vibration treatment with granular media made of natural material “Baykalit” reduces the height of the initial surface micrprofile by 0.2-0.3 microns and is an effective way to remove burrs when processing parts with a surface microprofile height of more than 0.63 microns. The use of process fluids, which include increasing the wetting capacity of both Baikalit and processed workpieces, reduces the technological time of vibration processing by 1.5 times. The presence of components in the process fluid, such as protective colloids (Na CMC), prevents the sludge from sticking to the galtovochnye bodies, that is, prevents the “salting” of their profile, reduces the rigidity of the layer on the surface of the galtovochnyh bodies and workpieces, which contributes to productivity growth.

We investigated an experimentally sheared (γ = 15, γ ̇ = 3 x 10-4s-1, 300 MPa, 750°C) quartz-muscovite aggregate to understand the deformation of parent and new crystals in partially molten rocks. The SEM and EBSD analyses along the longitudinal axial section of the cylindrical sample suggest that quartz and muscovite melted partially and later produced K-feldspar, ilmenite, biotite, mullite, and cordierite. Quartz grains became finer, and muscovite was almost entirely consumed in the process. With increasing , melt and crystal fractions decreased and increased, respectively. Amongst the new minerals, K-feldspar grains (highest area fraction and coarsest) nucleated first, whereas cordierite and mullite grains, finest and least in number, respectively, nucleated last. Fine grain size, weak CPOs, low intragranular deformation, and equant shapes suggest both initial and new minerals deformed dominantly by melt-assisted grain boundary sliding, which is further substantiated by higher misorientations between adjacent grains of quartz, K-feldspar, and ilmenite.

The Sambagawa metamorphic rocks in central Shikoku, southwest Japan consist of an inverted metamorphic sequence from the upper chlorite to oligoclase-biotite zones at the lower structural level (LSL), which is overlain by a normal metamorphic sequence consisting of the albite-biotite and garnet zones at the upper structural level (USL). These sequences form a large-scale recumbent fold called the Besshi nappe. To unravel the mechanism of recrystallization and physical conditions in quartz, and their relation to exhumation tectonics, microstructures of recrystallized quartz grains in quartz schist from the Asemi-Saruta-Dozan River traverse were analyzed. The recrystallized quartz grain size increases with increasing structural level from 40 µm in the upper chlorite zone to 160 µm in the garnet zone of the USL. Further, the mechanism of dynamic recrystallization of quartz changes from subgrain rotation to grain boundary migration with increasing structural level across the uppermost garnet zone of the LSL. From these data, the deformation temperatures in quartz schist are calculated to increase with increasing structural level within the range between 300 and 450 °C using paleopiezometers and experimental flow laws. It could be interpreted that a rapid cooling of the Besshi nappe from above is responsible for the deformation temperatures recorded in quartz schist.

Low-grade metamorphic temperature conditions associated with the Sanbagawa metamorphic event were estimated by the Raman spectroscopy of carbonaceous material (RSCM) in pelitic rocks and an electron backscatter diffraction (EBSD) analysis of the quartz in siliceous rocks. Analytical samples were collected from the Sanbagawa metamorphic complex, the Mikabu greenstones, and the Chichibu accretionary complex in the eastern Kanto Mountains, central Japan. Previously, low-grade Sanbagawa metamorphism was only broadly recognized as pumpellyite–actinolite facies assigned to the chlorite zone. The RSCM results indicate metamorphic temperatures of 358 °C and 368 °C for the chlorite zone and 387 °C for the garnet zone of the Sanbagawa metamorphic complex, 315 °C for the Mikabu greenstones, and 234–266 °C for the Chichibu accretionary complex. From the EBSD analyses, the diameter of the quartz grains calculated by the root mean square (RMS) approximation ranges from 55.9 to 69.0 μm for the Sanbagawa metamorphic complex, 9.5 to 23.5 μm for the Mikabu greenstones, and 2.9 to 7.3 μm for the Chichibu accretionary complex. The opening angles of the c-axis fabric approximate 40–50°, presenting temperatures of 324–393 °C for the Sanbagawa metamorphic complex and the Mikabu greenstones. The temperature conditions show a continuous increase with no apparent gaps from these low-grade metamorphosed rocks. In addition, there exists an empirical exponential relationship between the estimated metamorphic temperatures and the RMS values of the quartz grains. In this study, integrated analyses of multiple rock types provided valuable information on progressive low-grade metamorphism and a similar approach may be applied to study other metamorphic complexes.

We discuss meso- and microstructural features of granites closely related to strike-slip shear zones in the Borborema Province, NE Brazil. The Riacho do Icó stock is an en-cornue intrusion aged at ca. 607 Ma. Magmatic fabric is recorded in the core of the granite, whilst increasing deformation is marked by the development of mylonitic fabrics towards the Afogados da Ingazeira shear zone, including magmatic foliation and lineation rotation. Early recrystallization of quartz and K-feldspar crystals is widespread as a fabric with well-developed granoblastic polygonal textures and lobate subgrain boundaries, heterogeneously deformed lenses and ameboid quartz ribbons, typical of igneous rocks submitted to deformation in deep crustal levels. On the other hand, the Espinho Branco-Santa Luzia leucogranitic belt is hosted along the Patos Lineament, aged between the ca. 575 – 565 Ma interval. These rocks show discordant relationships with the host migmatites and the main deformational fabric is characterized by a dominant magmatic foliation that is locally overprinted by structures that are typical of solid-state flow. Quartz melt pockets and interstitial quartz grains filling fractures in feldspar clasts are common. Such characteristics are compatible with granites that were injected in the continental crust along planar anisotropies (i.e., shear zones) formed during the late-stage partial melting events that originated the migmatites of the area. The case studies are proxies in the understanding of different episodes of magma emplacement along shear zones in this part of West Gondwana.

ABSTRACT We report on the Cleanskin structure (18°10′00″S, 137°56′30″E), situated at the border between the Northern Territory and Queensland, Australia, and present results of preliminary geological fieldwork, microscopic analyses, and remote sensing. The Cleanskin structure is an eroded complex impact structure of ~15 km apparent diameter with a polygonal outline caused by two preexisting regional fault sets. The structure has a central uplift of ~6 km diameter surrounded by a rather shallow ring syncline. Based on stratigraphy, the uplift in the center may not exceed ~1000 m. The documentation of planar deformation features (PDFs), planar fractures (PFs), and feather features (FFs) in quartz grains from sandstone members of the Mesoproterozoic Constance Sandstone confirms the impact origin of the Cleanskin structure, as proposed earlier. The crater was most likely eroded before the Cambrian and later became buried beneath Cretaceous strata. We infer a late Mesoproterozoic to Neoproterozoic age of the impact event. In this chapter, the Cleanskin structure is compared with other midsized crater structures on Earth. Those with sandstone-dominated targets show structural similarities to the Cleanskin structure.