semg signals
Recently Published Documents

AbstractThe main objective of this work is to establish a framework for processing and evaluating the lower limb electromyography (EMG) signals ready to be fed to a rehabilitation robot. We design and build a knee rehabilitation robot that works with surface EMG (sEMG) signals. In our device, the muscle forces are estimated from sEMG signals using several machine learning techniques, i.e. support vector machine (SVM), support vector regression (SVR) and random forest (RF). In order to improve the estimation accuracy, we devise genetic algorithm (GA) for parameter optimisation and feature extraction within the proposed methods. At the same time, a load cell and a wearable inertial measurement unit (IMU) are mounted on the robot to measure the muscle force and knee joint angle, respectively. Various performance measures have been employed to assess the performance of the proposed system. Our extensive experiments and comparison with related works revealed a high estimation accuracy of 98.67% for lower limb muscles. The main advantage of the proposed techniques is high estimation accuracy leading to improved performance of the therapy while muscle models become especially sensitive to the tendon stiffness and the slack length.

As a machine-learning-driven decision-making problem, the surface electromyography (sEMG)-based hand movement recognition is one of the key issues in robust control of noninvasive neural interfaces such as myoelectric prosthesis and rehabilitation robot. Despite the recent success in sEMG-based hand movement recognition using end-to-end deep feature learning technologies based on deep learning models, the performance of today’s sEMG-based hand movement recognition system is still limited by the noisy, random, and nonstationary nature of sEMG signals and researchers have come up with a number of methods that improve sEMG-based hand movement via feature engineering. Aiming at achieving higher sEMG-based hand movement recognition accuracies while enabling a trade-off between performance and computational complexity, this study proposed a progressive fusion network (PFNet) framework, which improves sEMG-based hand movement recognition via integration of domain knowledge-guided feature engineering and deep feature learning. In particular, it learns high-level feature representations from raw sEMG signals and engineered time-frequency domain features via a feature learning network and a domain knowledge network, respectively, and then employs a 3-stage progressive fusion strategy to progressively fuse the two networks together and obtain the final decisions. Extensive experiments were conducted on five sEMG datasets to evaluate our proposed PFNet, and the experimental results showed that the proposed PFNet could achieve the average hand movement recognition accuracies of 87.8%, 85.4%, 68.3%, 71.7%, and 90.3% on the five datasets, respectively, which outperformed those achieved by the state of the arts.

Abstract Diabetic peripheral neuropathy (DPN) is associated with loss of motor units (MUs), which can cause changes in the activation pattern of muscle fibres. This study investigated the pattern of muscle activation using high-density surface electromyography (HD-sEMG) signals from subjects with type 2 diabetes mellitus (T2DM) and DPN. Thirty-five adults participated in the study: 12 healthy subjects (HV), 12 patients with T2DM without DPN (No-DPN) and 11 patients with T2DM with DPN (DPN). HD-sEMG signals were recorded in the tibialis anterior muscle during an isometric contraction of ankle dorsiflexion at 50% of the maximum voluntary isometric contraction (MVIC) during 30-s. The calculated HD-sEMG signals parameters were the normalised root mean square (RMS), normalised median frequency (MDF), coefficient of variation (CoV) and modified entropy (ME). The RMS increased significantly (p = 0.001) with time only for the DPN group, while the MDF decreased significantly (p < 0.01) with time for the three groups. Moreover, the ME was significantly lower (p = 0.005), and CoV was significantly higher (p = 0.003) for the DPN group than the HV group. Using HD-sEMG, we have demonstrated a reduction in the number of MU recruited by individuals with DPN. This study provides proof of concept for the clinical utility of this technique for identifying neuromuscular impairment caused by DPN.

Surface electromyogram (sEMG) signals are widely employed as a neural control source for lower-limb exoskeletons, in which gait recognition based on sEMG is particularly important. Many scholars have taken measures to improve the accuracy of gait recognition, but several real-time limitations affect its applicability, of which variation in the load styles is obvious. The purposes of this study are to (1) investigate the impact of different load styles on gait recognition; (2) study whether good gait recognition performance can be obtained when a convolutional neural network (CNN) is used to deal with the sEMG image from sparse multichannel sEMG (SMC-sEMG); and (3) explore whether the control system of the lower-limb exoskeleton trained by sEMG from part of the load styles still works efficiently in a real-time environment where multiload styles are required. In addition, we discuss an effective method to improve gait recognition at the levels of the load styles. In our experiment, fifteen able-bodied male graduate students with load (20% of body weight) and using three load styles (SBP = backpack, SCS = cross shoulder, SSS = straight shoulder) were asked to walk uniformly on a treadmill. Each subject performed 50 continuous gait cycles under three speeds (V3 = 3 km/h, V5 = 5 km/h, and V7 = 7 km/h). A CNN was employed to deal with sEMG images from sEMG signals for gait recognition, and back propagation neural networks (BPNNs) and support vector machines (SVMs) were used for comparison by dealing with the same sEMG signal. The results indicated that (1) different load styles had remarkable impact on the gait recognition at three speeds under three load styles (p < 0.001); (2) the performance of gait recognition from the CNN was better than that from the SVM and BPNN at each speed (84.83%, 81.63%, and 83.76% at V3; 93.40%, 88.48%, and 92.36% at V5; and 90.1%, 86.32%, and 85.42% at V7, respectively); and (3) when all the data from three load styles were pooled as testing sets at each speed, more load styles were included in the training set, better performance was obtained, and the statistical analysis suggested that the kinds of load styles included in training set had a significant effect on gait recognition (p = 0.002), from which it can be concluded that the control system of a lower-limb exoskeleton trained by sEMG using only some load styles is not sufficient in a real-time environment.

The purpose of this cross-sectional study was to analyze changes in normalized surface electromyography (sEMG) signals for the gastrocnemius medialis, biceps femoris, gluteus maximus, tibialis anterior, and vastus lateralis muscles occurring during a 400 m indoor sprint between subsequent curved sections of the track. Ten well-trained female sprinters (age: 21 ± 4 years; body mass: 47 ± 5 kg; body height: 161 ± 7 cm; 400 m personal best: 52.4 ± 1.1 s) performed an all-out 400 m indoor sprint. Normalized sEMG signals were recorded bilaterally from the selected lower limb muscles. The two-way ANOVA (curve × side) revealed no statistically significant interaction. However, the main effect analysis showed that normalized sEMG signals significantly increased in subsequent curves run for all the studied muscles: gastrocnemius medialis (p = 0.003), biceps femoris (p < 0.0001), gluteus maximus (p = 0.044), tibialis anterior (p = 0.001), and vastus lateralis (p = 0.023), but differences between limbs were significant only for the gastrocnemius medialis (p = 0.012). The results suggest that the normalized sEMG signals for the lower limb muscles increased in successive curves during the 400 m indoor sprint. Moreover, the gastrocnemius medialis of the inner leg is highly activated while running curves; therefore, it should be properly prepared for high demands, and attention should be paid to the possibility of the occurrence of a negative adaptation, such as asymmetries.

Surface electromyography (sEMG) is a valuable technique that helps provide functional and structural information about the electric activity of muscles. As sEMG measures output of complex living systems characterized by multiscale and nonlinear behaviors, Multiscale Permutation Entropy (MPE) is a suitable tool for capturing useful information from the ordinal patterns of sEMG time series. In a previous work, a theoretical comparison in terms of bias and variance of two MPE variants—namely, the refined composite MPE (rcMPE) and the refined composite downsampling (rcDPE), was addressed. In the current paper, we assess the superiority of rcDPE over MPE and rcMPE, when applied to real sEMG signals. Moreover, we demonstrate the capacity of rcDPE in quantifying fatigue levels by using sEMG data recorded during a fatiguing exercise. The processing of four consecutive temporal segments, during biceps brachii exercise maintained at 70% of maximal voluntary contraction until exhaustion, shows that the 10th-scale of rcDPE was capable of better differentiation of the fatigue segments. This scale actually brings the raw sEMG data, initially sampled at 10 kHz, to the specific 0–500 Hz sEMG spectral band of interest, which finally reveals the inner complexity of the data. This study promotes good practices in the use of MPE complexity measures on real data.

The aim of the present study was to predict the kinematics of the knee and the ankle joints during a squat training task of different intensities. Lower limb surface electromyographic (sEMG) signals and the 3-D kinematics of lower extremity joints were recorded from 19 body builders during squat training at four loading conditions. A long-short term memory (LSTM) was used to estimate the kinematics of the knee and the ankle joints. The accuracy, in terms root-mean-square error (RMSE) metric, of the LSTM network for the knee and ankle joints were 6.774 ± 1.197 and 6.961 ± 1.200, respectively. The LSTM network with inputs processed by cross-correlation (CC) method showed 3.8% and 4.7% better performance in the knee and ankle joints, respectively, compared to when the CC method was not used. Our results showed that in the prediction, regardless of the intensity of movement and inter-subject variability, an off-the-shelf LSTM decoder outperforms conventional fully connected neural networks.