Materials Circular Economy
Latest Publications

AbstractFibrous materials are among those most used for the thermal and acoustic insulation of building envelopes and are also suitable for a wide range of applications. In building construction, the demand for products with low environmental impact — in line with the Green Deal challenge of the European Community — is growing, but the building market is still mostly oriented towards traditional products, missing the many opportunities for using waste materials from existing industrial production. The paper presents the experimental results of new thermal and acoustic insulation products for building construction and interior design, based on previous experiences of the research group. They are produced entirely using waste sheep’s wool as a “matrix” and other waste fibres as “fillers”. The materials proposed originate from textile and agri-industrial chains in the Piedmont region and have no uses other than waste-to-heat biomass. The panels have characteristics of rigidity, workability, and thermal conductivity that make them suitable for building envelope insulation.

Abstract Natural fibre–reinforced composites are more sustainable than other composites with respect to the raw materials. Their properties are attractive due to high specific properties, and especially so wherever high damping is valued. As the interphase between fibre and matrix is the region of highest stresses, a strong bond between fibre and matrix is essential for any composites’ properties. The present study compares two methods of determining the interfacial shear stress in natural fibre–reinforced composites: the single fibre fragmentation test and the single fibre pullout test. The studied composites are flax fibre reinforced epoxy. For a variety of fibre–matrix interaction, the fibres are treated with a laccase enzyme and dopamine, which is known to improve the fibre–matrix shear strength. In the observed samples, single fibre fragmentation test data, i.e. of fracture mode and fragment length, scatter when compared to pullout data. In single fibre pullout tests, the local interfacial shear strength showed a 30% increase in the laccase-treated samples, compared to the control samples. The method also permitted an evaluation of the frictional stress occurring after surface failure.