Chapter 4

Ethical Problem-Solving Techniques

Objectives :
After reading this chapter , you will able to: 1- Apply these methods to hypothetical and real cases . 2- See how flow charting can be use to solve ethical problem. 3- Learn what bribery is and how to avoid it .

Introduction
In this chapter , well examine methods for analyzing ethical problems and see how to apply them . Obviously , some problems are easily solved . But , many of the situations are ambiguous or unclear , This is type of problem for which well most need analysis and problemsolving methods .

We will talk about :

1. Analysis of issues in ethical problems 2.Line drawing 3.Flow charting 4.conflict problems 5.application of problem-solving method : bribery/acceptance of gift 6.two cases: -cellular phone and cancer-vice president Spiro agnew and construction kickbacks in Maryland 7. conclusion

4.2 ANALYSIS OF ISSUES IN ETHICAL PROBLEMS

The first step for solving any ethical problem is to completely understand all the issues involved. After that, a solution to the problem is apparent. The issues involved in understanding ethical problems can be split into three categories: 1) Factual. 2) Conceptual. 3) Moral.

4.2.1 Types of Issues in Ethical Problems Solving

1)

Factual issues:

Factual issues involve what is actually known about a case (what the facts are). Although this concept seems straightforward, the facts of a particular case are not always clear and may be controversial. For example: The controversy regarding abortion rights

Roe v. Wade, the original decision legalizing abortion in the United States was decided by the Supreme Court in a split decision . Even the justices of the Supreme Court were unable to agree on this fact .

In engineering, there are controversies over facts as well.

For Example: Global Warming
Greenhouses omit gases into the atmosphere, such as carbon dioxide, which trap heat into the atmosphere. This leads to a generalized warming of the atmosphere as emissions from automobiles and industrial plants increase the carbon dioxide concentration in the atmosphere. This issue has a great importance to engineers, since they might be required to design new products or redesign old ones to reduce carbon dioxide rate in the atmosphere. However , the global warming process is only barely understood, and curtail emission of these gases is controversial topic.

2) Conceptual issues: Conceptual issues have to do with the meaning or applicability of an idea. In engineering ethics, this might mean what constitutes a bribe as opposed to an acceptable gift, or whether certain business information is proprietary. * In the case of the bribe, the value of a gift is probably a wellKnown fact. But, what isnt known is whether accepting It will lead to unfair influence on a business decision or not? For example: conceptually it must be determined if the gift of tickets to a sporting event by a potential supplier of parts for your project is meant to influence your decision Or is just a nice gesture between friends? NOTE: Conceptual issues are like factual issues is NOT always clear-cut and will often result in controversy.

3) Moral issues:
Moral issues is more obvious than factual and conceptual issues, once the problem is defined, it is clear which moral concept applies, and the correct decision becomes obvious. *In the previous example, once it is determined whether its a gift or a bribe, the appropriate action is obvious. If we determine that is indeed a bribe, then it cannot ethically be accepted.

*How can controversies in an ethical problem be resolved?

-Factual issues can often be resolved through research to establish the truth. Further research helps clarify the situation, so that the areas of agreement increase. -Conceptual issues are resolved by agreeing on the meaning of terms and concepts. Further analysis of the concepts at least clarifies some of the issues and helps to facilitate agreement. -Moral issues are resolved agreement as to which moral principles are pertinent and how they should be applied.

4.2.2 Application to a Case Study: Paradyne Computers

In 1980 the Social Security Administration (SSA) published a request for proposals (RFP) for computer systems to replace the older equipment in its field offices. SSA wanted to purchase an offthe-shelf system already in the vendors product line rather than a custom system. Paradyne bid to supply the SSA with new computer systems. Problems occurred immediately when the Paradyne computers failed the acceptance testing. Subsequent investigation by SSA indicated that the product supplied by Paradyne was not an off-theshelf system. In preparing their bid, Paradyne wrote in the present tense as if the computer they proposed currently existed, rather than in the future tense which would have indicated that the product was still under development. Paradyne claimed that the use of the present tense in their bid was acceptable since it is common business practice to advertise products under development this way.

Firstly, we will look at the factual issues. The request for proposals clearly specified that only existing systems would be considered. Paradyne didnt have any such system running and have never tested the operating system on the product they actually proposed to sell to the SSA. The employment of a former SSA worker by Paradyne to help lobby SSA for the contract. The conceptual issues involve whether bidding to provide an off-the-shelf product when the actual product is only in the planning stages is lying or is an acceptable business practice. *Is placing a Paradyne label over the real manufacturers label deceptive? Indeed, Paradyne asserted that it had done nothing wrong and was simply engaging in common business practices.

The moral issues include the following: Is lying an acceptable business practice? Is it alright to be deceptive if doing so allows your company to get an contract? The answer to these questions are obvious: Lying and deceit are no more acceptable in your business life than in your personal life. So, if conceptually we decide that Paradynes practices were deceptive, then our analysis indicates that their actions were unethical.

*What was the unethical action which has been taken by Paradyne Company that caused this problem to occur??

* Line Drawing Technique

This technique is useful for situation in which the applicable moral principle are clear
*objective from line drawing help to solve the ethical aspects of a problem

How performed the line drawing technique ??

1- Drawing a line.
2- At the end of the line is placed the "positive paradigm" an example of something that is morally acceptable.

How performed the line drawing technique ??

3- In another side is placed the "negative paradigm" an example of the something that is not morally acceptable.
4- In between is placed the problem under consideration

Example

our company would like to dispose of a slightly toxic waste by damping it in to a local lake from which a nearby town gets it is drinking water .how can we determine if this practice is acceptable

Start defining the problem

it is proposed that our company dispose of a slightly hazardous waste by dumping it into a lake . a nearby town takes its drinking water supply from this lake. our research shows that with the amount of waste we plan to put into the lake, the average concentration of the waste in the lake will be 5 parts per million (ppm) . the EPA limit for this materials has been set at 10-ppm . at the 5-ppm level, we expect no health problems, and consumers would not be able to detect the compound in their drinking water.

Defining the positive and negative paradigms

Positive paradigm: the water supply for the town should be clean and safe.

Negative paradigm: toxic levels of waste are put into the lake.

Negative paradigm (NP)

Positive paradigm (PP)

damp toxic levels of should be waste in lake and safe.

water clean

now let's establish some other hypothetical examples for consideration:

1- the company dumps the chemical into the lake. at 5 ppm, the chemical will be harmless, but the town's water will have an unusual taste. 2- the chemical can be effectively removed by the town's existing water treatment system. 3- the chemical can be removed by the town with new equipment that will be purchased by the company.

4-the chemical can make people feel ill, but this only lasts for an hour and is rare . 5-At 5 ppm, some people can get sick, but the sickness only lasts a week, and there is no long-time harm. 6-Equipment can be installed at the plant to reduce the waste level to 1 ppm.

Redraw our line with the example inserted appropriately

NP

pp

6 2-3

denoting our problem by a "P" and inserting it at the appropriate place along the line
NP PP

5 4 4 1 p 6 2-3 It is clear that dumping the toxic waste is probably a morally acceptable choice, since no humans will be harmed and the waste levels will be well below those that

Although this problem-solving method seems to help with problem analysis and can lead to solutions, there are many pitfalls in its use. if not used properly, line drawing can lead to incorrect results .

 What

is the objective of line diagram ?

FLOW CHART

Flow chart are very familiar to engineering student.

They are most often used in developing computer programs, and also find application in other engineering disciplines.

In engineering ethics ,flow charting will be helpful for analyzing a variety of cases, especially those in which there is a sequence of events to be considered or a series of consequence that flow from each decision.

An advantage of using a flow chart to analyze ethical problem is : 1- it gives a visual picture of a situation 2- allows you readily see the consequence that flow from each decision

We can illustrate this technique by applying a simple flow chart to disaster that happen at Union Carbide's Bhopal is shown in figure 4.6

We want to decided wether or not to build a plant at Bhopal.

Union Carbide would like to build plant in Bhopal

Are safety laws in india as strict as in U.S ?

yes
Design plants as in U.S

No
Are local adequatc for safe operation?

yes Design according to local standards

Build plant anyway and assume risk

No
Decide on minimal standards that will ensure local safety Is the cost effective ?

yes
Build plant

No Invest else where

The flow chart helps to visualize the consequences of each decision and indicates both the ethical and unethical choices.

Another possible flow chart is shown in figure 4.7 . This chart deals with the decisions required during the maintenance of the flare tower .

Maintenance needed on flare tower

Go ahead

No

Is MIC tank filled?

yes

Defer maintenance until other system are available

No

Are other safety systems operating ?

yes No
Will these other system adequately prevent accident?

Defer maintenance

yes

Perform maintenance

CONFLICT PROBLEMS

How do we make the correct choice between two conflicting moral values ? Conflict problems can be solved in three ways There are conflicting moral choices , but one is obviously more significant than the other . For example : protecting the health and safety of the public is more important than your duty to your employer . In this type of case , the resolution of the conflict involves an easy choice . Another solution is called the creative middle way This solution is an attempt at some kind of a compromise that will work for everyone . The emphasis here should be on the word crative because it takes a great deal of creativity to find a middle ground that is

acceptable to everyone and a great deal of diplomacy to sell it to everyone . The sales job is especially difficult because of the nature of compromise , which is often jokingly defined as the solution where nobody gets what they want . An example of a creative middle ground : dumping a toxic waste into a local lake . one finds ways to redesign the production process to minimize the waste product , another finds to treat municipal water to remove this chemical before it is sent to home . Obviously , no one will be completely satisfied with these alternatives . Finally , when there is no easy choice and attempt to find a middle ground are not successful , all that is left to make the hard choice . Frequently , you must rely on gut feeling for which path is correct one .

* Lets illustrate the resolution of conflict problems by examining the challenger explosion .

There was an unknown probability that the shuttle would explode. Bob Lund an engineering manager of Thiokol company: * Had a responsibility to his company and the people who worked for him.

There were consequences of postponing the launch

*Loss of future contract from NASA . *Loss of jobs to many Thiokol workers. *Bankruptcy of the company.

Conflict problem in challenger explosion

Moral

choice The middle creative Hard choice

Question:
Why Lund -engineering managermade the hard choice and chose to risk the lunch??

AN APPLICATION OF PROBLEM-SOLVING METHODS : BRIBERY/ACCEPTANCE OF GIFTS

One of the many gray areas of engineering ethics is the acceptance of gifts from vendors or the offering of gifts to customers to secure business . The difficulty here comes because of the potential for gifts to become bribes or to be perceived of as bribes . Bribery is illegal in USA and contrary to popular opinion , is also illegal everywhere in the world . There are some places where bribery may be overlooked , or even expected , but it always takes place under the table and is never a legitimate businesses practices . In many cases, there is a fine line between bribery and a simple gift . Sometimes the distinction has to do with the value of the gift . Always it has to do with the intent of the gift .

By definition , a bribe is - something, such as money or a favor, offered or given to someone in a position of trust in order to induce him to act dishonestly . - Its is something offered serving to influence or persuade . What are ethical reasons for not tolerating bribery ? - First, bribery corrupts our free market economic system and it is anticompetitive . - Second, bribery is a sellout to the rich : bribery corrupts justice and public policy by allowing rich people to make all the rules . - Finally, bribery treats people as commodities that can be bought and sold .

When Is a Gift a Bribe ?

Frequently , The boundary between a legitimate gift and a bribe is very subtle . There is no problem with accepting gifts as advertising, such as mugs or calendars with logo and phone number on it . Dining with a customer or a supplier is also an acceptable practice , especially if everyone pays his own ways . When meals or gifts are no longer of low cost and the expense of these items is not shared it is may be bribe .

Examples of Gifts vs. Bribes

During a sales visit , a sales representative offers you a coffee mug with his companies name and logo on it . Your meeting with a sales representative is running into the lunch hour , she invites you to go out for lunch . A sales representative from whom you often purchase asks if you would like to play tennis with him this weekend at one of the local municipal courts .

Problem Solving

Bribery can easily be analyzed by looking at the factual . Conceptual , and moral issues . Frequently, the facts will be obvious : who offered a gift . What its value , and what its purpose . Conceptual issues will be somewhat more difficult , since it must be determined whether the gift is of sufficient value to influence a decision or whether that influence is the intent of the gift .

Avoiding Bribery Problems

How does one ensure that accepting a gift does not cross the line into bribery ? The first and the most important method to look at company policy , all large corporations and many smaller companies have very clear rules about what is acceptable . Another method of an action is sometimes referred to as New York Times Test

Cellular phones and cancer

This case study about the experiment nature of engineering and deals of what engineers should do early in the design cycle for new product or system in order to: 1-avoide possible harm to customers or public. 2- what engineer should do after has been released when possible dangers are brought up.

What's happened??
In 1992 concerns about potential adverse health effect of cell phone began with lawsuit in Florida. In 1995 the suit was dismissed due to lack of scientific evidence to support Reynard's claim.

Problem
You are placing a source of electromagnetic radiation in close to your brain. 1940 the biological effect of rf energy have been studied. The goal of this study was to try to determine the level of exposure to rf radiation from cell phone and to try to correlate the levels with health effect especially cancers.

The result of case study:

Some theoretical studies have examined how rf energy might be deposit into a human brain during cell phone use. These studies are very difficult to benchmark because it is difficult to make measurement of energy deposition directly into a human brain.

Engineering ethics
Redesign the cell phone to reduce or eliminate this problems. what is the prudent and ethical thing to do in designing such products in an atmosphere where some doubt about safety ethics exists? The designer minimize these risk to the extent possible.

Question
What should an engineer do today when designing product that will emit radiation? A. Redesigned product to make it safe to use B. Redesigned product to reduce or eliminate this problem C. Redesigned product to minimize this risk D. All of the above

Construction kickbacks in Maryland

-Engineering

and architectural services for government projects were put out for bids in many firms.
-Maryland

is a construction firm,it always seems to lose out on big public works contracts.
--

Lester Matz, an engineer worked in Maryland , he decided to use contacts and requisite bribes and kickbacks to get the contracts for public-works and the government.

- In 1961, Matz courted Spiro Agnew(a rising politician), and he denoted him $ 500 in his campaign in Baltimore country executive who was determining who received the contracts for engineering services .

- Agnew won the election, Matzs engineering firms contribution rewarded with the contracts for country works .

-Matz became relatively wealthy and Agnew was elected governor of Maryland and he received a payment for every contract awarded, then in 1968 he was elected as Vise President on the Republican ticket . In total,Matzs payments to Agnew are over $ 100,000 To reward the contracts.
-

These kickbacks were secret, illegal, and not reported on Agnew's income tax returns. for this reason, Agnew had resigned as a vise president in 1973 , and he judged to pay a fine of $ 10,000 . on the other hand,and for agreeing to cooperate with the prosecution, Matz hadnt been prosecuted.

** although Agnew had been reelected in the landslide in the 1972 election,the watergate scandal occurred which led to the resignation of the president Richard Nixon.

** These events are considered to be one of the most intense government crises in the U.S history.

What do you think?

What should an engineer do In the face of competition from others who are willing to resort to bribery ???