8645 en
8645 en
8645 en
Rotating, non-contact transfer Model 8645 with round shaft Model 8646 with square ends
Model 8645
Model 8646
n n n n
Application
With its new EMD technology this sensor can measure static and dynamic torque from non-rotation up to permanent high speed. The reliability and, above all, the very low price opens up new possibilities next to the present applications for torque measurement sensors. Examples: Automotive (steering, gearing, motors) Drilling systems Screwing and bolting tools Textile machines Test rigs Pumps Fitness and workout gears Mechanical conveying technology Household appliances
Technical changes reserved Latest updates of data sheet always under www.burster.com
Description
A new, patented technology (EMD technology) is used to create the electrical voltage from the applied torque. The nickeliferous steel shaft is impregnated with a permanent magnetic pattern. Torque changes this pattern as well as the magnetic field. As a result, the sensor delivers a torquedepending measurement signal for the evaluation by EMD electronic of the stator. The function derives only from a magnetization of the shaft (no strain gauges, no wiring). An ASIC for signal extension gives the user a torque-proportional electrical voltage.
burster praezisionsmesstechnik gmbh & co kg . Tel. +49-7224-6450 . Fax 64588 Talstr. 1-5 . D-76593 Gernsbach . www.burster.com . info@burster.com
8645 EN
8645 EN - 2
Technical Data
Order Code 8645-5002.5 8645-5005 8645-5007.5 8645-5017.5 8645-5075 8645-5175 8645-5250 8645-5500 Order Code 8646-5002.5 8646-5005 8646-5007.5 8646-5017.5 8646-5075 8646-5175 8646-5250 8646-5500
0 ... 2.5 Nm 95.5 0 ... 5 Nm 95.5 0 ... 7.5 Nm 95.5 0 ... 17.5 Nm 95.5 0 ... 75 Nm 107,0 0 ... 175 Nm 123.5 0 ... 250 Nm 123.5 0 ... 500 Nm 146,0
5 12 5 12 5 12 5 12 5 18 5 24 5 24 2 33.5
Electrical values
Excitation voltage: 9 ... 12 V DC Excitation current (60 mA for a period of 10 ms at the start): < 10 mA Analog output signal measuring range: 2.5 V 2 V nominal Signal output at 0 Nm (adjustable): 2.5 VDC Output resistance: 50 Cut-off frequency (-3 db): 1 kHz
Dimensional drawings (1) Do not fasten/unfasten neither the mounting screw Model 8645
Round ends
(2)
nor for connection nut. Potentiometer for offset adjustment of signal output to 2.5 V beneath closure.
Environmental conditions
Temperature operating: 0 ... 70 C Temperature effect zero: < 0.1 % F.S./K Do not apply torque sensor within dynamic magnetic fields, e.g. near high running motors. Resistance to magnetic fields: max. 300 kA/m at distance of 70 mm (4000 Oe) Linearity and hysteresis failure and signal variation during rotation: measuring ranges up to 50 Nm 2 < 1 % F.S. measuring range 500 Nm < 2 % F.S. Repeatability: < 0.1 % F.S. Resolution: 0.1 % F.S. Rotary speed: model 8645 (permanent 3000) max. 5000 min-1 model 8646 max. 1000 min-1 Protection class: acc. EN 60529 IP50 Max. torque of usage: 150 % of nominal torque Fracture torque: 300 % of nominal torque Maximum axial load (all ranges) between shaft and housing: influence < 1 % F.S. 40 N Maximum radial load (all ranges) influence < 1 % F.S. 50 N Shaft material housing: Ni Cr Ni 14 Electrical connection: 5 pin connector, mating connector mounted on cable, length 1,5 m, included in delivery Mechanical connection: Model 8645 both shaft ends with keyway acc. measuring range up to 250 Nm 1 keyway acc. DIN 6885-1A measuring range 500 Nm 2 keyways acc. DIN 6885-1A Model 8646 Square, male and female, acc. DIN 3121 Wiring Code Cable excitation signal output excitation/signal GND free reference voltage Wiring Code + white + brown - black Vref (2.5 V) grey Connection at Sensor 1 2 3 4 5
Round end with one keyway DIN 748 and DIN 6885
Model 8646
Square ends
Mechanical values
The CAD drawing (3D/2D) for this sensor can be imported online directly into your CAD system. Download via www.burster.com or directly at www.traceparts.com. For further information about the burster traceparts cooperation refer to data sheet 80-CAD-EN. For mounting the sensor it should be respected that the shafts are arranged exactly in line to the connecting shafts. There should not exit any axial and radial load. To avoid that please use flexible shaft couplings, torsionally stiff. The four flats on the housing should be only used to secure the sensor against rotation. Refer to clamps and accessories. Avoid any axial or radial load between housing and shaft during the installation.
Mounting Instructions
Torque sensor, round ends, measuring range 0 ... 5 Nm, (cable 1.5 m included) Model 8645-5005 Connector for connecting the sensor to burster desktop devices Model 9941 Installation of a connector to the sensor cable Connecting cable Connecting cable Order Code 99004
320-008645EN-5072-021511
length 1.5 m, one end free Model 8645-Z001 (included in delivery) length 3 m, one end free Model 8645-Z002 Model 8645-Z003 Model 8645-Z004
Upon delivery without mounted connector please use a connector with shielding. Generally the shielding should escort the signal as far as possible. The use of another cable than the one included in delivery can affect the proper function of the sensor system. Technical changes reserved Latest updates of data sheet always under www.burster.com
Clamp for 8645 and 8646 for ranges up to 17.5 Nm for ranges from 75 Nm
Amplifier, process indicators like e.g. digital displays 9163, 9180 see section 9 of the catalog.
burster praezisionsmesstechnik gmbh & co kg . Tel. +49-7224-6450 . Fax 64588 Talstr. 1-5 . D-76593 Gernsbach . www.burster.com . info@burster.com