Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    Banner Mounting Brackets

    Uploaded by

    Memik Tyln
    The document describes an SMB18S swivel mount bracket that can be used to mount sensors with an 18mm threaded barrel, allowing alignment of the sensor. It has a ball-and-socket joint for sensor alignment and is made of thermoplastic polyester and stainless steel. To use it, the sensor is threaded onto the swivel ball and then mounted and aligned by tightening the screws.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Banner Mounting Brackets

    Uploaded by

    Memik Tyln
    45 views9 pages
    The document describes an SMB18S swivel mount bracket that can be used to mount sensors with an 18mm threaded barrel, allowing alignment of the sensor. It has a ball-and-socket joint for sensor alignment and is made of thermoplastic polyester and stainless steel. To use it, the sensor is threaded onto the swivel ball and then mounted and aligned by tightening the screws.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes an SMB18S swivel mount bracket that can be used to mount sensors with an 18mm threaded barrel, allowing alignment of the sensor. It has a ball-and-socket joint for sensor alignment and is made of thermoplastic polyester and stainless steel. To use it, the sensor is threaded onto the swivel ball and then mounted and aligned by tightening the screws.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views9 pages

    Banner Mounting Brackets

    Uploaded by

    Memik Tyln
    The document describes an SMB18S swivel mount bracket that can be used to mount sensors with an 18mm threaded barrel, allowing alignment of the sensor. It has a ball-and-socket joint for sensor alignment and is made of thermoplastic polyester and stainless steel. To use it, the sensor is threaded onto the swivel ball and then mounted and aligned by tightening the screws.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    SMB18S Swivel Mount Bracket

    For use with 18 mm threaded-barrel sensors

    Features
    18 mm swivel mount uses a ball-and-socket joint to simplify sensor alignment
    May be used with any sensor having an 18 mm mounting thread, including Banner
    MINI-BEAM, Q25, T18, and S18 series sensors (S18 sensor shown here)
    Plastic parts are thermoplastic polyester; mounting hardware is stainless steel

    Mounting
    Thread the swivel ball onto sensor and lock against either the sensor housing
    (e.g., Q25) or the jam nut provided with the sensor.
    Loosely mount the bracket and sensor assembly in position.
    Align the sensor and lock the swivel ball by tightening the two mounting screws.

    M5 x 0.8 mm
    Mounting Screws
    (included)

    Sensor
    (not included)

    Socket

    36 mm
    (1.42")

    Jam Nut
    (not included)

    M18 x 1 threaded
    Swivel Ball
    10.9 mm
    (0.43")

    Optional Spacer

    Mounting Surface

    38.1 mm
    (1.50")

    6.4 mm
    (0.25")

    Nut Plate

    13 mm (0.5") max
    [19 mm (0.75") without spacer]

    46.0 mm
    (1.81")

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    SMB30UR Mounting Bracket


    For use with MULTI-BEAM, MAXI-BEAM, Q45, OMNI-BEAM and LS10 Sensors

    SMB30UR Top
    59.9 mm
    (2.36")

    60

    8X #10-32

    38.1 mm 30.0 mm
    (1.50") (1.18")

    38.1 mm
    (1.50")

    76.2 mm
    (3.00")

    23.1 mm
    (0.91")

    2X 7.1
    (0.28")

    15.2 mm
    (0.60")

    15.2 mm
    (0.60")

    57.1 mm
    (2.25")

    27.9 mm
    (1.11")
    31.8 mm
    (1.25")

    3.4 mm
    (0.14")
    82.2 mm
    (3.24")

    SMB30UR Bottom
    172.0 mm
    (6.77")

    31.8 mm
    (1.75")

    50.8 mm
    (2.00")

    90
    5X 7.1 mm
    (0.28")

    31.8 mm
    (1.25")

    6X 1/4-28
    57.2 (2.25")
    50.8 mm
    (2.00")

    25.4 mm
    (1.0")

    70.0 mm
    (2.75")

    9.7 mm
    (0.38")

    2X
    1/4 x 28 x 1/2"
    Screw

    22.4 mm
    (0.88")
    66.0 mm
    (2.6")
    89.8 mm
    (3.54")

    9.7 mm
    (0.38")

    12.7 mm
    (0.50")
    25.4 mm
    1.00")

    2X 1/4"
    Lock Washer
    2X 1/4"
    Flat Washer

    77.1 mm
    (3.04")

    76.2 mm
    (3.00")

    3.4 mm
    (0.14")

    Material: 300 Series Stainless Steel

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    SMB18UR Mounting Bracket


    For use with T18, S18, M18 and MINI-BEAM Sensors

    16.0 mm
    (0.63 ")

    SMB18UR Top
    18.3 mm
    (0.72")

    66.0 mm
    (2.60")
    45.2 mm
    (1.78")

    27.2 mm
    (1.07")
    50.8 mm
    (2.0")

    2.7 mm 20.8 mm
    (0.82")
    (0.10")

    60

    60

    20.3 mm
    (0.80")
    30.5 mm
    (1.20")
    2X #10-32 x 1/2"
    Screw

    R2.5 mm
    (0.10")

    24.6 mm
    (0.97")

    2X #10
    Lock Washer
    2X #10
    Flat Washer

    46.7 mm
    (1.84")
    25.4 mm
    (1.00")

    8.1 mm
    (0.32")

    41.7 mm
    (1.64")

    9.7 mm
    (0.38")

    SMB18UR Bottom
    60

    4X 6.9 mm
    (0.27")

    41.7 mm
    (1.64")

    137.2 mm
    (5.40")

    41.7 mm
    (1.64")

    20.3 mm
    (0.80")

    20.3 mm
    (0.80")
    30.5 mm
    (1.20")

    25.4 mm
    (1.00")

    20.8 mm
    (0.82")

    33.8 mm
    (1.33")

    6X #10-32 Thru
    63.5 mm
    (2.50")

    71.1 mm
    (2.80")

    2.7 mm
    (0.10")

    Material: 300 Series Stainless Steel

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    SMBT18Y Mounting Bracket


    For use with T18 sensors

    Features
    Die-cast bracket for mounting into 18 mm holes
    Metal hex nut included
    Accommodates Euro-style QD connectors and cabled versions

    19.3 mm
    (76.0)
    15.3 mm
    (60.3")
    25.4 mm
    (1.00")

    2.0 mm
    (0.08")
    25.4 mm
    17.25 mm (1.00")
    (68.0)

    18.3 mm
    (0.72")
    M18

    12.0 mm
    (0.47")

    Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com

    You might also like