Simboluri Hidraulice
Simboluri Hidraulice
Basic Symbols
Lines
-dashed line - pilot, drain -envelope - long and short dashes around two or more component symbols.
Circular
-large circle pump, motor -small circle Measuring devices -semi-circle rotary actuator
Square
-one square - pressure control function -two or three adjacent squares directional control
Diamond
-diamond Fluid conditioner (filter, separator, lubricator, heat exchanger)
Miscellaneous Symbols
-Spring -Flow Restriction
http://www.airlinehyd.com/KnowledgeCenter/Symbols.asp (1 of 12)11/15/2005 9:44:31 PM
Triangle
-solid Direction of Hydraulic Fluid Flow -open Direction of Pnematic flow
Compressor
Motors
Fixed displacement hydraulic motor
unidirectional bidirectional
Pneumatic motor
unidirectional -bidirectional
Rotary Actuator
- hydraulic - pneumatic
Cylinders
Single acting cylinder
-returned by external force -returned by spring or extended by spring force
-single-stage direct operation unit which accepts an analog signal and provides a similar analog fluid power output -two-stage with mechnical feedback indirect pilot operation unit which accepts an analog signal and provides a similar analog fluid power output
Control Methods
Manual Control
-general symbol (without showing the control type) -pushbutton -lever -foot pedal
Mechanical Control
-plunger or tracer
Electrical Control
-Solenoid (the one winding)
Pilot Operation
-pneumatic -hydraulic
-pilot operated check valve, pilot to close -pilot operated check valve, pilot to open
Shuttle valve
-to isolate one part of a system from an alternate part of circuit.
Sequence Valve
- when the line pressure reaches the setting of the valve, valve opens permitting flow to the secondary port. The pilot must be externally drained to tank. - pressure downstream Pressure Reducing valve of valve is limited to the setting of the valve
-with fixed output (variations in inlet pressure do not affect rate of flow) -with fixed output and relief port to reservoir with relief for excess flow (variations in inlet pressure do not affect rate of flow) -with variable output -fixed orifice -metered flow toward right free flow to left -pressure compensated flow control fixed output flow regardless of load -pressure and temperature compensated -with variable output and relief port to reservoir
Shut-Off Valve
-Simplified symbol
Accumulators
Water Trap
-with manual drain -with automatic drained
Air Dryer
refrigerant, or chemical removal of water from compressed air line
Lubricator
Conditioning unit
-compound symbol of filter, regulator, lubricator unit -Simplified Symbol
Heat Exchangers
-air or water cooled unit designed to remove heat from oil returning to reservoir
Hydraulics| Pneumatics| Electro Controls| Marine & Mobile| Fluid Connectors| Safety Systems| Training| Repair & Field Service
Contact Airline If you would like a Sales Quote, please email Request Sales Quote If you have any questions, comments, or suggestions about this page please Send E-mail to the Webmaster Copyright 1997 Airline Hydraulics Corporation Legal Disclaimer