Egant: 700 - 2700 MHZ GSM, Tdma, Umts, W-Lan
Egant: 700 - 2700 MHZ GSM, Tdma, Umts, W-Lan
Egant: 700 - 2700 MHZ GSM, Tdma, Umts, W-Lan
ANT1 ANT2
CELLULAR COMPONENTS
RBS 1 RBS 2
Innovative design The 3 dB combiner incorporates a broad band and low loss design. It is specically designed with low insertion loss and intermodulation in mind. There is no need for terminations or attenuators, which results in very low insertion loss and outstanding intermodulation performance.
Combines up to 2 repeaters or RBSs into the same antenna system The 3 dB combiner enables the connection of 2 repeaters or radio base stations. The combiner combines the signal and equally splits the signals between the antenna ports. This is a highly important function when designing shared antenna systems wishing to connect multiple repeaters or RBSs to the shared antennas.
The benets from installing the 3 dB combiner instead of power splitters are: Lower insertion loss Fewer system components Superior antenna isolation Greater system quality Cost effective design improvement
Electrical Specications
Product number: Passband: Isolation between ports: Input return loss: Coupling: Max input power/port: 3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out: EG 500 8010 700 - 2700 MHz > 30 dB > 22.0 dB 3.1 + 0.3 dB 240 W < - 117 dBm, 160 dBc 50 Ohm 135 x 45 x 80 mm 7/16 (f) EG 500 8011 700 - 2700 MHz > 30 dB > 22.0 dB 3.1 + 0.3 dB 240 W < - 117 dBm, 160 dBc 50 Ohm 135 x 45 x 80 mm N (f)
Mechanical Specications
Dimensions (W x H x D): Connectors:
Environmental Specications
Temp. range (normal operation): Humidity: Sealing:
Egant reserves the right to change this product specication at any time without notice.
Out 1 + 2 Out 1 + 2
In 2 In 1
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail: info@egant.se www.egant.se
RevB