Atlas Copco Face drilling rigs

Technical specification

Boomer 282
Equipped with COP 1638 or COP 1838ME rock drills
Coverage area up to 45 m2

Hydraulically controlled mining and tunnelling face drilling rig with

two BUT 28 booms. Available with a variety of rock drills to suit
customer requirements.

Standard features
Rock drill
COP 1638 or COP 1838ME rock drill with
dual-damping system for optimal consumable life
Pressurized housing and mating surfaces to reduce internal
contamination of the rock drill

Hydraulic boom
BUT 28 heavy-duty boom with double tripod suspension
for accurate hydraulic parallel holding in all directions

Hydraulic feed
BMH 2800-series heavy-duty aluminium feed with high
bending and torsional resistance for maximum durability
Snap-on stainless steel sleeves and polymer contacts

Control system
Hydraulically controlled drilling system which incorporates
the anti-jamming function Rotation Pressure Controlled Feed
(RPCF)

Carrier
Sturdy, articulated carrier with four-wheel drive
Powered by a 4-cylinder, EPA III/COM III (Tier 3/Stage IIIA)
approved diesel engine
Four jacks for stable set up

General
FOPS-approved telescopic protective roof
Cable reel
Electrically driven piston compressor
Electrically driven water booster pump
Working lights

Boomer 282 with COP 1638 or COP 1838ME

Specifications
ROCK DRILL

Electrical system
COP 1638

COP 1838ME

Shank adapter

R32/R38/T38

R32/R38/T38

Height over drill centre

88 mm

88 mm

Length without shank

1 008 mm

1 008 mm

Impact power

16 kW

18 kW

Impact rate

60 Hz

60 Hz

Hydraulic pressure

200 bar

230 bar

Rotation system

Separate rotation

Separate rotation

Rotation speed

0340 rpm

0340 rpm

Rotation torque, max

640 Nm

640 Nm

Lub. air consump. at 2 bar

6 l/s

6 l/s

Water consumption

1.1 l/s

1.1 l/s

Weight

170 kg

170 kg

Sound level

<106 dB(A)

<106 dB(A)

Total installed power....................................................125 kW

Main motors.............................................................2 x 55 kW
Voltage.................................................................3801 000 V
Frequency. ................................................................5060 Hz
Starting method........................star/delta (1 000 V direct start)
Thermal overload protection for electric motors
Percussion hour meter
Digital voltmeter/amperage meter in electric cabinet
Phase sequence indicator
Earth fault indicator
Battery charger
Transformer. ...................................................................4 kVA
Cable reel, diameter.......................................... 660/1 395 mm

Hydraulic system
FEED
BMH 2800

BMH 2831

BMH 2837

BMH 2843

BMH 2849

Total length

4 677 mm

5 287 mm

5 897 mm

6 507 mm

Drill steel length

3 090 mm

3 700 mm

4 310 mm

4 920 mm

Hole depth

2 795 mm

3 405 mm

4 015 mm

4 625 mm

Weight, incl. drill

475 kg

495 kg

525 kg

540 kg

Feed force

15.0 kN

15.0 kN

15.0 kN

15.0 kN

Boom
Boom............................................................................BUT 28
Feed extension......................................................... 1 250 mm
Boom extension....................................................... 1 250 mm
Parallel holding..........................................................complete
Feed roll-over.................................................................... 360
Max. lifting angle..................................................... +65/30
Max. swinging angle.................................................+45/-25
Weight, boom only......................................................1 750 kg

Air system
Electronically driven screw compressor........Atlas Copco LE7
Capacity, max at 7 bar. ..................................................12.5 l/s
Air pressure gauge

Water system
Electronically driven water booster pump.......Flygt PXR812H
Water booster pump max capacity at 13.5 bar........... 100 l/min
Min water inlet pressure. ...................................................2 bar
Water flow guard

Control system
Direct hydraulic Control System, DCS
Basic functions such as anti-jamming included

Hydraulic pumps...............2 separate units, one for each boom

Pumps unloaded at start
System pressure, max. ...........................................150230 bar
Hydraulic oil tank, volume max/min.................................195 l
Oil temperature gauge on oil tank
Electrical oil filling pump
Oil filter indicator
Water cooled oil
Filtration. ........................................................................ 16 m
Mineral hydraulic oil
Two operator control panels

Carrier
Deutz 4-cylinder, D914 L04 2V, EPA III/COM III (Tier 3/
Stage IIIA) approved 4-stroke prechamber diesel engine
Power rating at 2 300 rpm. ............................... 58 kW (78 hp)
Torque at 1 500 rpm.....................................................270 Nm
Articulated steering................................... 41 steering angle
Fixed seat for tramming
Four-wheel drive
Hydrostatic power steering system
Hydrostatic transmission. .....................................Clark 12000
Front axle.................................................................. Dana 176
Rear axle .........................................Dana 176, 8 oscillation
Automatic differential lock on rear axle
Tyres. ....................................................................12.00 x R20
Clearance outside axles....................................................... 15
Hydraulic jacks, front . ........................................ 2 extendable
Hydraulic jacks, rear...............................................................2
Service brakes..............................................2 separate circuits
Emergency and parking brakes......................................SAHR
Fuel tank, volume. ............................................................. 60 l
Exhaust catalyser
Silencer
Electric system..................................................................24 V
Batteries....................................................................2 x 70 Ah
Tramming lights......................................................... 8 x 70 W
Working lights.......................................................... 3 x 500 W
Brake lights
Fire extinguisher
Central lubrication system
Spirit level
Gradeability at max. load on drive wheels. ........................ 1:4
Horn, beacon and reverse alarm
Rock drill lubrication warning kit

Boomer 282 with COP1638 or COP1838ME

DRIFTER RODS

Shank adapters

Dimension

Min. hole diameter

Thread

Diameter

Length

mm

R32-H35-R38

45

mm

R38

38

435

R32-H35-T38

45

T38

38

435

R32-H35-T38 Speedrod

45

R32

38

525

SR35-H35-R38 Speedrod

45

T38*

38

525

SR35-H35-T38 Speedrod

45

SR35-H35-T38

45

Couplings

SR35-R39-T38

45

Thread

Diameter

Length

R32-R39-T38

45

SR35-R39-T38

45

mm

R38

55

170

SR35-R39-T38 Speedrod

45

T38

55

190

*Intended for RAS and extension drilling with BSH 110

Extension rods for injection drilling/RAS

Dimension

Min. hole diameter

mm

Rnd 32 Speedrod

51

Rnd 38 Speedrod

64

Optional equipment
Rock drill/Drilling system
Big hole drilling kit
Water mist flushing, external water and air supply
Hole blowing kit with 2x50 l air receiver
Hole blowing kit with external air supply
Dry drilling system

Feed
Telescopic feed BMHT 2000-series (max 14 ft)
Extension drilling set BSH 110 (BMH feeds only)

Boom
Feed Angle Measurement system (FAM 1)
Feed Angle Measurement system with hole depth measurement (FAM 2)
Automatic boom lubrication kit, rear part of boom

Protective roof
Manual spotlight, left and/or right
Outlet for communication radio, 12V
Illuminated stairs

Cabin
FOPS-approved cabin, noise level <85 dB(A), including:
-- Air conditioning unit
-- Fixed seat
Manual spotlight, left and/or right
Illuminated stairs for platform
CD-player
Outlet for communication radio, 12 V

Water system
Water hose reel

Hydraulic system
Hydraulic oil thermostat
Heater kit for oil tank

Carrier
Fire suppression system ANSUL (manual or Checkfire)

Electrical system
Electric cable type H07RN-F or Buflex
Plug for cable
Switch gear
Electric outlet for accessories, 16 A (CE and not for 1,000 V)

Miscellaneous
Hydraulic Swellex pump type H1 for manual installation
Manual lubrication kit
Rig washing kit
Boot washing kit
Ni-Cr plated piston rods (limitations exist)

Boomer 282 with COP1638 or COP1838ME

1555

3055

725

11830 (BMH 2843)

side view

3300

3000
x)

1905

200

6055

1990

6350

41

R2800

8060
8720

R5

70

x)

Coverage area

TURNING RADIUS

DIMENSIONS
mm

RECOMMENDED CABLE SIZE AND LENGTH

Width

1 990

Height with cabin

3 050

Height roof up/down

3 000/2 300

Length with BMH 2343 feeds

11 830

Ground clearance

290

Voltage

380400 V
440500 V
550 V
660690V

TRAMMING SPEED
km/h

1,000 V

On flat ground (rolling resistance 0.05)

>13

On incline 1:8

> 4.5

WEIGHT
gross weight, depending on configuration
kg

3000
3300

Total

18 300

Boom side

12 800

Engine side

5 500

Type

Dimension, mm2

Diameter,
mm

Length,
m

H07RN-F
Buflex
H07RN-F
Buflex
H07RN-F
Buflex
H07RN-F
Buflex
H07RN-F
Buflex

4X150
3x185+3G35
4X120
3x150+3G25
4X95
3x120+3G25
4X70
3x95+3G16
N/A
3x50+3G10

67
56
60
52
55
46
49
45
N/A
33

60
90
75
100
90
135
110
155
N/A
200

Recommendations are given for surrounding temperature of 40 C and up to a height of 2 000 m.

11/2008

635

9851 2500 01c

2310

Copyright 2008, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos
may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.

2300

700

Measurements