Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 180 views

    3.4.b.01 Air Blower

    Uploaded by

    Gohar Khokhar
    This two-page document is an equipment data sheet for an air blower. It includes specifications for the blower such as the manufacturer, model, size, performance conditions including flow rates and pressures, materials of construction, bearing and seal details, and required tests. It also lists utilities needed to operate the blower and notes to be completed by the purchaser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    3.4.b.01 Air Blower

    Uploaded by

    Gohar Khokhar
    180 views2 pages
    This two-page document is an equipment data sheet for an air blower. It includes specifications for the blower such as the manufacturer, model, size, performance conditions including flow rates and pressures, materials of construction, bearing and seal details, and required tests. It also lists utilities needed to operate the blower and notes to be completed by the purchaser.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This two-page document is an equipment data sheet for an air blower. It includes specifications for the blower such as the manufacturer, model, size, performance conditions including flow rates and pressures, materials of construction, bearing and seal details, and required tests. It also lists utilities needed to operate the blower and notes to be completed by the purchaser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    180 views2 pages

    3.4.b.01 Air Blower

    Uploaded by

    Gohar Khokhar
    This two-page document is an equipment data sheet for an air blower. It includes specifications for the blower such as the manufacturer, model, size, performance conditions including flow rates and pressures, materials of construction, bearing and seal details, and required tests. It also lists utilities needed to operate the blower and notes to be completed by the purchaser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 2

    DOCUMENT No.

    PAGE

    OF

    REV.

    DATE

    Equipment Data Sheet


    SI UNITS
    REV*

    PROJECT No. CLIENT PROJECT SERVICE MODEL INSTALLATION AMBIENT TEMPERATURE DESIGN CASE 1 DESIGN CASE 2

    RFQ/RFP NO. LOCATION VENDOR TAG SIZE SERIAL QTY

    AIR BLOWER
    1 MANUFACTURER 2 3 ENVIRONMENT 4 ELEVATION 5 CAUSE OF CORROSION/EROSION 6 7

    PERFORMANCE / OPERATING CONDITIONS


    MIN. MAX. DESIGN CASE 3
    0 0

    C DESIGN CASE 4

    DESIGN CASES kPa(abs) kg-mol m /h kg/h % kg/s


    0 0 3

    GUARANTEED

    8 GAS HANDLED (ANALYSIS ATTACHED) 9 ATMOSPHERIC PRESSURE 10 MOLECULAR WEIGHT 11 STD. FLOW SCMH @ 150C & 101.325 12 ACTUAL FLOW @ SUCTION CONDITIONS 13 MASS FLOW 14 RELATIVE HUMIDITY 15 WATER VAPOUR 16 SUCTION TEMPERATURE 17 DISCHARGE TEMPERATURE (EST.) 18 SUCTION PRESSURE 19 DISCHARGE PRESSURE 20 DIFFERENTIAL PRESSURE 21 GAS COMPRESSIBILITY 22 23 24 25 POLYTROPIC HEAD 26 POWER ( + / - 4%) 27 SPEED 28 ESTIMATED SURGE 29 30 31 STEAM 32 33 34 35 36 37 38 39 ELECTRIC POWER 40 41 42 43 44 45 46 47 REMARKS 48 49 50 51 52 53 54 55 56 57

    C kPag kPag kPag k=Cp/Cv k=Cp/Cv k=Cp/Cv k=Cp/Cv bhp rpm % m3/h

    SUCTION DISCHARGE SUCTION DISCHARGE

    UTILITIES
    INLET
    0 0 0

    EXHAUST

    COOLING WATER TYPE PRESSURE TEMP MAX. ALLOW. TEMP. RISE kPag
    0 0

    NORMAL TEMP1 MAX. TEMP MIN. TEMP

    C C

    NORMAL PRESSURE1 MAX. PRESSURE kPag MIN. PRESSURE kPag

    C kPag

    C C

    REMARKS MAIN AUXILIARY V Hz ft

    VOLTAGE PHASE FREQUENCY ENCLOSURE ELEVATION

    NOTE:

    INDICATES INFORMATION TO BE COMPLETED BY PURCHASER 0: INDICATES AN ORDER REVISION

    BY VENDOR 1, 2, 3, : INDICATES A POST-ORDER REVISION

    * A, B, C, : INDICATES A PRE-ORDER REVISION

    REV

    DATE

    BY

    CK'D

    APP.

    DESCRIPTION

    REV

    DATE

    BY

    CK'D

    APP.

    DESCRIPTION

    \\vboxsrv\conversion_tmp\scratch_6\[152154039.xls.ms_office.xls]PAGE 1

    ISO 9001 DATA SHEET

    DOCUMENT No.

    PAGE

    OF

    REV.

    DATE

    Equipment Data Sheet


    SI UNITS
    REV*

    PROJECT No. CLIENT PROJECT SERVICE MODEL

    RFQ/RFP NO. LOCATION VENDOR TAG SIZE NOZZLE CONNECTIONS SIZE INLET DISCHARGE DRAIN VENT IMPELLERS TYPE FORGED WELDED mm RIVETED CAST mm m/s SERIAL QTY

    AIR BLOWER
    1 MANUFACTURER 2 3 MAX. SPEED 4 OVERSPEED TEST 6 CRITICAL SPEED 7 8 CASING 9 10 11 12 13 14 15 16 17 BEARING HOUSING 18 19 20 21

    CONSTRUCTION
    rpm rpm FIRST SECOND MODEL CASING SPLIT MATERIAL THICK. DESIGN PRESSURE HYDROTEST PRESS OPERATING TEMP. MAX.
    0

    TRIP SPEED MAXIMUM CW rpm rpm CCW

    rpm rpm

    ANSI RATING

    FACING

    POSITION

    5 ROTATION VIEWED FROM COUPLING END

    mm

    CORROSION ALLOW.

    mm kPag kPag

    MATERIAL DIAMETER MAX. DIAMETER MAX. TIP SPEED MAX. MACH NO. @ IMPELLER EYE SHAFT MATERIAL DIAMETER @ IMPELLER DIAMETER @ COUPLING mm mm

    MIN.

    TYPE MATERIAL BOLTED ON OTHER JOURNAL BEARINGS TYPE MATERIAL DIAMETER THRUST BEARINGS TYPE MATERIAL SURFACE LOADING m2 kPa mm INTEGRAL W/ CASING

    LABYRINTHS IMPELLER LABYRINTH MATERIAL SHAFT SLEEVES UNDER LABYRINTH SHAFT SEAL TYPE BUFFER GAS TYPE FLOW m 3/h @ SEALING LIQUID TYPE FLOW m 3/h @ kPag
    0

    22 BEARINGS 23 24 25 26 27 28 29 30 31 32 33 TESTS 34 35 36 37 38 39 40 41 OIL SYSTEM 42 43 44 45 46 ACCESSORIES 47 48 49 50 51 52 53 54 55 56 57 REMARKS 58 59 60 61

    LABYRINTH

    CARBON RING

    LIQUID SEAL

    kPag

    BASE PLATE & ASSEMBLY REQUIRED REQUIRED REQUIRED REQUIRED REQUIRED REQUIRED WITNESSED WITNESSED WITNESSED WITNESSED WITNESSED WITNESSED WEIGHTS & DIMENSIONS COMPRESSOR (L x W x H) WEIGHT INSTALLED SHIPPING HEAVIEST PART FOR MAINTENANCE TYPE MAKE MODEL REMARKS kg kg kg m BASEPLATE SOLE PLATES SS PIPING FEED SS PIPING DRAIN COMMON W/ DRIVER

    HYDROSTATIC PERFORMANCE MECHANICAL RUN SHOP INSPECTION DRIVER W/ COMPRESSOR DISMANTLE-INSPECTION

    FURNISHED BY COMMON WITH SEE OIL SYSTEM DATA SHEET

    AXIAL PROBES VIBRATION PROBES VIBRATION READOUT VIBRATION MONITOR COUPLING COUPLING SPACER
    INSTRUMENT

    NOTE:

    INDICATES INFORMATION TO BE COMPLETED BY PURCHASER 0: INDICATES AN ORDER REVISION

    BY VENDOR 1, 2, 3, : INDICATES A POST-ORDER REVISION


    ISO 9001 DATA SHEET

    * A, B, C, : INDICATES A PRE-ORDER REVISION


    \\vboxsrv\conversion_tmp\scratch_6\[152154039.xls.ms_office.xls]PAGE 1

    You might also like