Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 232 views

    Datasheet Ac

    Uploaded by

    Mohan Varkey
    1. The document provides data sheets for various equipment for a chilled water system, including a water cooled chiller package, chilled water pumps, and air handling units. 2. Specifications are given for the chiller package components like compressors, condensers, and evaporators. Details include capacities, materials of construction, operating conditions, and inspection and testing requirements. 3. Similarly, specifications are provided for the chilled water pumps and air handling units, listing dimensions, performance characteristics, materials of construction, and operating conditions. Accessories, controls, and inspection standards are also outlined.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd

    Datasheet Ac

    Uploaded by

    Mohan Varkey
    232 views9 pages
    1. The document provides data sheets for various equipment for a chilled water system, including a water cooled chiller package, chilled water pumps, and air handling units. 2. Specifications are given for the chiller package components like compressors, condensers, and evaporators. Details include capacities, materials of construction, operating conditions, and inspection and testing requirements. 3. Similarly, specifications are provided for the chilled water pumps and air handling units, listing dimensions, performance characteristics, materials of construction, and operating conditions. Accessories, controls, and inspection standards are also outlined.

    Original Description:

    datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides data sheets for various equipment for a chilled water system, including a water cooled chiller package, chilled water pumps, and air handling units. 2. Specifications are given for the chiller package components like compressors, condensers, and evaporators. Details include capacities, materials of construction, operating conditions, and inspection and testing requirements. 3. Similarly, specifications are provided for the chilled water pumps and air handling units, listing dimensions, performance characteristics, materials of construction, and operating conditions. Accessories, controls, and inspection standards are also outlined.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    232 views9 pages

    Datasheet Ac

    Uploaded by

    Mohan Varkey
    1. The document provides data sheets for various equipment for a chilled water system, including a water cooled chiller package, chilled water pumps, and air handling units. 2. Specifications are given for the chiller package components like compressors, condensers, and evaporators. Details include capacities, materials of construction, operating conditions, and inspection and testing requirements. 3. Similarly, specifications are provided for the chilled water pumps and air handling units, listing dimensions, performance characteristics, materials of construction, and operating conditions. Accessories, controls, and inspection standards are also outlined.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    of 9

    1.

    DATA SHEET FOR WATER COOLED CHILLER PACKAGE


    OPERATING CONDITIONS
    Duty
    Contineous
    Installation
    Indoor. Only piping routed outside
    Quantity
    Working
    1 No
    Stand by
    1 No
    Area classification
    Driver
    Electric motor
    Refrigerant
    R-22
    Capacity of each chiller package
    47 T (minimum)
    MANUFACTURER SPECIFICATION
    Scroll Compressors
    Make
    Model
    Type
    Capacity
    Saturated suction pressure
    Saturated suction temperature
    Saturated discharge pressure
    Saturated discharge temperature
    Actual discharge temperature
    Compressor speed (RPM)
    Guaranteed shaft power
    Motor power & speed
    Motor suitable for loaded starting (Yes/No)
    Description of unloaded starting arrangement
    Min compressor speed for proper lubrication/capacity
    control
    LUBRICATION
    Type
    Grade of lubrication oil
    Lubrication oil charge
    CAPACITY CONTROL
    Type
    Actuators
    Actuators operated by
    Compressor to unload on power failure/stoppage
    Capacity regulation steps
    Capacity (TR)
    Shaft power (kw)
    Isolation valves for individual scroll compressors
    Required
    DIMENSIONS/WEIGHTS
    Compressor weight
    Maximum erection weight
    Maximum maintenance weight with component name
    Overall size
    Condenser
    Type
    Water cooled
    Model
    Quantity of condensers per unit (Nos.)
    Type
    Total heat rejection (TR)

    Face area of each coil (mm x mm)


    Face velocity across coil (m /sec).
    Tube O.D. (mm)
    Tube thickness (mm)
    Bends thickness (mm)
    Fin spacing (FPI)
    Fin thickness (mm)
    Shell OD (mm)
    Shell thickness (mm)
    Tube to tubesheet joint, expanded/welded
    Water inlet flange
    Water outlet flange
    MATERIAL OF CONSTRUCTION
    Water Cooled Condenser
    Tubes
    Fins
    Shell
    Channel/ Channel covers
    Tubesheet
    Baffles/ tubesupport
    Flanges
    Gasket
    Bolts/ nuts
    Isolation valves for individual condensors
    Chiller (Evaporator)
    Type
    Make
    Model
    Capacity
    Chilled water temperature at inlet (degC)
    Chilled water temperature at outlet (degC)
    Chilled water pressure at inlet (Kg/cm2 (g))
    Chilled water pressure at outlet (Kg/cm2 (g))
    Fouling resistance, water side (m2 hr degC/Kcal)
    LMTD (degC)
    Overall heat transfer coefficient (Kcal/hr m 2 deg C
    Chilled water flow rate (M3/hr)
    No. of passes, tube side (Nos).
    Pressure drop, water side (Kg/cm2)
    Design pressure, shell side (Kg/cm2 a)
    Design pressure, tube side (Kg/cm2 a)
    Hydraulic test pressure, shell side (Kg/cm2 a)
    Hydraulic test pressure, tube side (Kg/cm2 a)
    Pneumatic test pressure, shell side (Kg/cm2 a)
    Pneumatic test pressure, tube side (Kg/cm2 a)
    Design temperature, shell side (degC)
    Design temperature, tube side (degC)
    Total no. of tubes (Nos).
    Tube OD at plain end (mm)
    Tube thickness at plain end mm
    Tube length between tube sheets mm
    Tube type
    Fin spacing (FPI)
    Total tube surface areas (m2)
    i) Water side

    Required
    Shell & Tube, DX type
    47 TR (minimum)

    Copper tubes

    ii) Refrigerant side


    Shell OD (mm)
    Shell thickness (mm)
    Tube to tube sheet joint, expanded/welded
    Water inlet flange
    Water outlet flange
    Material
    Shell
    Channel/channel covers
    Tube sheet
    Baffles/Tube supports
    Tubes
    Flanges
    Gasket
    Bolts & Nuts
    Isolation valves for individual Evaporators
    INSPECTION AND TESTING
    As per Clause 14 of Technical Specifications

    Required

    2. DATA SHEET FOR CHILLED WATER PUMP


    GENERAL
    Owner:
    Item No.:
    No. Reqd.:
    Applicable to

    BPCL Kochi Refimery

    Location: CPP Control room compressor room


    Service :
    Chilled Water

    Working
    2
    Standby
    1
    Parallel Operation Required:
    Yes
    No
    Proposal
    Purchase
    As Built
    Scope option & Information specified by purchaser
    Information Reqd. from & option left to vendor. Vendor to cross X the selected option.
    Driver:Working
    1
    Standby
    Driver Supplied & Mounted By:
    Vendor.
    OPERATING CONDITIONS
    Liquid Handled
    Chilled Water
    Capacity (m3/hr):Min/Nor/Rated: minimum
    Pumping Temp.(C):
    Normal
    Max.
    Discharge Pressure (kg/cm2,G):
    Specific Gravity at P.T./15C:
    Suction Pressure :Nor./ Max. (kg/cm2,A):
    Vapour Pressure at P.T. (kg/cm2,A):
    Diff. Pressure (kg/cm5) @ Rated Capacity:
    Viscosity at P.T. (cP/cst):
    Corr./Eros. By:
    Diff. Head (m) @ Rated Capacity:
    Solids in suspension
    Size :
    %
    NPSH Available (m):
    Yes
    No
    MANUFACTURERS SPECIFICATIONS
    Pump Manufacturer:
    Model No.:
    CONSTRUCTION
    PERFORMANCE
    Casing Mounting:
    Proposal Curve No.
    Centreline
    Foot
    Inline
    Casing Split:
    Visc. Corr. Factor: C
    CQ
    CH
    Axial
    Radial
    Type:
    NPSH Reqd. (Water) (m):
    F/L Speed (rpm):
    Single Volute
    Double Volute
    Diffuser
    Casing Connection:
    No. of stages:
    Efficiency (%):
    Vent
    Drain
    Gauge
    Nozzles
    Size
    ANSI Rating
    Facing
    Position
    Rated BKW(0% Tol.):
    kW
    Max.BKW rtd. Imp.:
    kW
    Suction
    BKW @ MCF(=1.0):
    kW
    Rec. Driver Rating:
    kW
    Discharge
    Max.head rtd imp.(m):
    Cap @
    MCF (m3/hr):Stable
    Imp. (mm)
    Max:
    Rated:
    Min:
    Type:
    Thermal
    Brg. : Type/No. Radial:
    Thrust:
    Lub:
    M.A.W.P @ 15 degC/P.T./Design Temp.(kg/cm2,G):
    Cplg.:Make/Type:
    Fleximetl w spacer
    Nonspark Guard Yes
    Hydrostatic Test pressure (kg/cm2,G):
    No
    Driver Half cplg. mounted by:
    Rotation facing coupling end:
    Pump Mfr.
    Others
    CW
    CCW
    Packing Type:
    Size:
    No. of rings:
    Seal flush/ Quench plan:
    Material :
    Mech. Seal: Make
    Model:
    API Code :
    Ext. seal flush fluid:
    LPM:@
    kg/cm2G/ degC
    Base Plate Drain Rim Type :
    Fdn. Bolts:
    Seal Barrier fluid:
    LPM:@
    kg/cm2G/ degC
    Yes
    No
    Yes
    No
    Throat Bush: Yes
    Matl.:
    Bal. Device:
    Ext. quench fluid:
    LPM:@
    kg/cm2G/degC
    No
    Yes
    No
    Materials (As per API-610 Matl. Class I -2):
    MOC
    ASTM Grades
    C.W. Plan :
    LPM:@
    kg/cm2G/ degC
    I - Cast Iron
    Casing
    I
    Weight(kg): Pump+Base+Coupling:
    Driver:
    B - Bronze
    Impeller
    B
    AUXILIARY PIPING INTERFACE CONNECTIONS
    S - Carbon Steel
    Inner Case parts
    (All interface conn.shall be termntd.with a flng. block valves)
    C - 11-13% Chr. Stl.
    Sleeve Packed
    Size
    Rating(ANSI)
    Facing
    h - Hardened
    Sleeve Seal
    Lantern Ring Inlet/Outlet
    f - Faced
    Casing ring
    H-BHN
    Ext. Seal flush fluid
    K -SS 304
    Impeller ring
    50(min)
    Seal Quench fluid Inlet
    L -SS 316
    Shaft
    EN-8
    Seal pot vent/ drain
    X
    Throttle Bush
    Casing vent/ drain
    Y
    Throat Bush
    C.W Inlet/ Outlet
    Z
    Balance Drum
    Base plate drain (only flanged)
    Casing steam jacket
    Driver suitable for Pump starting with open Disc. Valve condition.
    INSPECTION & TESTS (EACH PUMP)
    Witness
    Observe
    Witness
    Observe
    Shop Test / Inspection

    Material Certificates

    Hydrostatic

    Performance/Sound Level

    Applicable Specification: EIL Specification 6-41-03

    NPSH As Reqd.
    Per Spec.
    Mandatory
    Dismantle Insp. & Re-assembly after Test
    Unitisation/Dimensional Check
    Check for direction of rotation of pump & driver.

    REMARKS:-1) Max. allowable casing working pressure shall not be less than ------kg/cm2G @ ------degC.
    2) Down Stream Design Pressure is
    kg/cm2g.
    3) Accessories and Instrumentation shall be as per BPCL-KR approved vendors only.
    4) Unitisation of Pump and Driver shall be done in pump manufacturer's shop.

    3. DATA SHEET FOR AIR HANDLING UNIT


    OPERATING CONDITIONS
    Area Classification
    Type
    Quantity

    Safe area
    Draw through/forced through

    Working
    Stand by
    Arrangement

    2 Nos.
    - Nos.
    Horizontal floor mounted

    MANUFACTURER SPECIFICATION
    Make
    Model
    FILTER AT AHU INLET
    Make
    Model
    Total air flow rate
    m3/hr
    Quantity of filter elements
    nos.
    Filtration efficiency
    90 % Down to 10 microns
    Size of filter elements
    mm x mm x mm
    Face velocity
    m/sec
    Pressure drop in clean condition
    mm WC
    Maximum allowable pressure drop
    mm WC
    Fixing
    Flange/channel
    Type of filter
    Dry fabric cleanable
    FACE & BYPASS DAMPER SECTION
    m2
    Face area
    By pass area
    m2
    Control (Manual/proportionating thermostat controlled
    modulating motor)
    COOLING COIL SECTION
    Make
    Model
    oC DB/
    oC WB
    Air entering condition
    Air leaving condition
    oC DB/
    oC WB
    oC
    ADP
    LMTD
    oC
    Capacity
    TR
    m3/hr
    Total air flow rate
    Face area
    m2
    Coil size
    mm x mm
    Velocity of air across coil (face velocity)
    m/sec
    No. of rows
    Tube per row
    Type
    DX
    By pass factor
    Pressure drop (Air side)
    mm WC
    Pressure drop (Water side)
    mm WC
    Tube OD
    mm
    Tube thickness
    mm
    Bend thickness
    mm
    Fin spacing
    FPI
    Bonding of fins (Hydraulically/with mandrel)
    BLOWER SECTION
    Type
    Centrifugal
    Blade profile
    Forward/Backward/Radial
    No. of impellers
    nos.

    Impeller diameter
    mm
    Air flow rate (for one AHU)
    16000 cfm
    Static pressure
    mm WC
    Impeller speed
    RPM.
    Power consumption at shaft
    kw
    Guaranteed power consumption at motor terminals
    kw
    Air out velocity
    m/sec
    Drive arrangement
    V-belt drive
    Motor
    kw/
    RPM
    No. of belts
    Bearings
    Self aligning heavy duty ball bearings
    Noise level
    DIMENSIONS / WEIGHTS
    Overall size
    Overall weight
    Kg.
    ACCESSORIES
    Purchasers
    Vendors
    Requirement
    Confirmation
    Guard for moving parts
    Required
    Fire resistant flexible connection at AHU outlet
    Required
    Insulted drain pan with drain connection
    Required
    Grease nipple for bearings
    Required
    Painting on MS parts
    Required
    Vibration isolator (ribbed neoprene rubber pads)
    Required
    Bronze/gun metal bushes at spindle ends of F&BP damper Required
    Drain piping
    Required
    V-belt drive packages with V-belts, pulleys
    Required
    Common base frame
    Required
    Volume control damper at AHU outlet
    Required
    Insulation of fan section & coil section
    Required
    ACCESSORIES/INSTRUMENTS/CONTROLS (REFRIGERANT CIRCUIT)
    Liquid strainer
    Required
    Drier
    Required
    Sight glass
    Required
    Pressure gauge for Refrigerant in/out
    Required
    Solenoid valve
    Required
    Expansion valve
    Required
    MATERIAL
    Coil tubes
    Seamless copper tubes
    Filter Media
    HDPE mesh
    Fins
    Aluminium
    AHU casing
    16 Gauge CRCA/G.I.
    Drain pan
    16 Gauge G.I. Sheet
    Impeller
    M.S. sheets
    Blower shaft
    EN-8
    V-pulley
    C.I. Grooved
    Face & bypass damper blade
    16 Gauge G.I. Sheet
    Filter casing
    Aluminium
    Face & bypass damper frame
    16 Gauge CRCA
    Bearings at face & bypass damper
    Nylon / Sintered Brass / Gun Metal

    Filter mounting frame


    Coil header
    Coil casing

    Zinc sprayed M.S. Sections

    INSPECTION AND TESTING


    As per EILs standard specification no. 6-37-0013

    4. DATA SHEET FOR FINE FILTER


    OPERATING CONDITIONS
    A
    i Total quantity of air handled (Cfm)
    ii Type of filter media
    Washable HDPE
    iii Expected impurities in air
    As generally present in ambient air
    B
    MANUFACTURER SPECIFICATION
    i Make
    ii Model
    iii Capacity per filter element (Cfm)
    iv Quantity of filter element (Nos)
    Nos.
    v Size of filter element
    610 mm x 610 mm x 305/150 mm
    vi Face velocity
    Fpm
    vii Filtration efficiency
    95 % down to 5 micron
    viii Pressure drop in clean condition
    6.5 mm WC
    ix Maximum allowable pressure drop (When due for
    mm WC
    cleaning )
    x Fixing
    Flange / Channel
    xi Weight of each filter element
    Kg.
    xii Method to clean filter
    Wash in water
    xiii Mounting of filter
    Vertical
    xiv Direction of air flow
    Horizontal
    C
    ACCESSORIES
    i Nuts, bolts, rubber bushes, springs as necessary
    To be provided by Vendor
    for mounting the filter modules in ladder type
    frames.
    D
    MATERIAL
    i Filter casing
    ii Filtering media
    iii Separators
    iv Wire mesh to support filter media
    v Gasket
    vi Nuts/bolts/bush/springs
    vii Filter mounting frame
    E
    F

    Aluminium
    HDPE
    Aluminium
    G.I.
    Neoprene sponge rubber
    Galvanised
    Ladder type made of MS rolled
    sections, Spray galvanized
    INSTRUMENT

    i Pressure drop measurement device


    INSPECTION AND TESTING

    Water tube manometer

    i As per EILs standard specification no. 6-37-0013. Dust test not required. Type test will
    suffice.

    5. DATA SHEET FOR FRESH AIR CENTRIFUGAL FAN


    A
    i
    ii
    iii
    iv
    v

    OPERATING CONDITIONS
    Fluid handled
    Suspended Solids
    Nature of fluid
    Suction temperature Maximum/
    Minimum
    Fluid flow rate

    vi
    vii

    Duty
    Height above m.s.l.

    viii
    ix

    Area Classification
    Quantity
    Working

    I
    Ii
    Iii

    Nil
    Non corrosive/ non toxic
    Deg C

    CFM
    Continuous
    M
    Safe
    1 No

    Standby
    x
    B
    i
    ii
    iii
    iv
    v
    vi
    vii
    viii
    ix
    x
    xi
    xii
    xiii
    xiv
    xv
    xvi
    xvii
    xviii
    xix
    xx
    xxi
    C

    Ambient air

    Nos
    Indoor

    Location

    MANUFACTURERS SPECIFICATION
    Make
    Model
    Spark proof construction
    Reqd / Not Reqd
    Class of construction
    I/II/III/IV
    Type
    Centrifugal SISW/DIDW
    Blade
    Backward/ Forward/ Radia
    Static pressure
    Mm WC
    Outlet velocity
    m/sec
    Operating range
    Nm3/hr to
    Nm3/hr
    Outlet area
    M2
    Impeller speed at design condition
    RPM
    Mounting arrangement
    3/1-A
    Impeller diameter
    Mm
    Impeller speed (safe limit)
    RPM
    Type of drive
    Direct/Gear/ V-belt
    Motor kw/rpm
    Noise level
    Corrossion proof construction
    Only painting required
    Details of painting
    Painting as per specs
    Total weight (Fan + motor+base frame) Kg
    Maintenance weight
    Kg
    ACCESSORIES
    Casing(Axial/ Radial,
    Split/nonsplit)
    Back draft damper at outlet
    ON OFF damper at outlet

    Purchasers requirement
    Required
    Required
    Required

    Vendors con

    Iv
    V
    Vi
    Vii
    Viii
    Xi
    X
    Xi

    Damper control (Manual/


    Required
    automatic)
    Inlet guide vanes
    Not required
    IGV controls (Manual/
    Not required
    automatic)
    Impeller washing system
    Not required
    Common base frame for fan and Required
    motor
    Casing drain (Plugged/isolation Required
    valve)
    Rain hood
    Not required
    Flexible (Rubberised canvas)
    Required
    connection at suction /discharge
    Painting (as per attached
    xii
    Required
    specs.)
    xiii V-belt drive package
    Required
    xiv Slide rail for motor
    Required
    Vibration Eliminators at base,
    xv
    Required
    Cushy Foot Type
    xvi Access door on casing
    If Required
    xvii Foundation nuts & bolts
    Required
    Guards for moving parts, spark
    xviii
    Required
    proof
    xix Lifting lugs
    Not Required
    xx Cooling disc/radiation shield
    Not Required
    Foundation
    xxi
    Required
    (Concrete/Structural/Floating)
    Inlet/Outlet connection
    xxii
    Required
    (Flanged/Non flanged)
    xxiii Inlet screen
    Not Required
    Antistatic belts in case of belt
    xxiv
    Required
    drive
    MATERIAL OF CONSTRUCTION
    i Casing

    Carbon steel/Aluminium/Stainless steel

    ii Impeller

    Carbon steel/Aluminium/Stainless steel

    iii Shaft
    iv Shaft sleeve
    v Damper/IGV
    E

    INSPECTION AND TESTING


    i As per EILs standard
    specification no. 6-37-0013.

    You might also like