This document outlines a course on Computer Aided Design and Analysis. The purpose is to teach students how to use computers as a design tool in mechanical engineering. It is a 3 credit course with 5 units covering topics like CAD modeling, curves and surfaces, graphics concepts, CAD standards, and finite element analysis. Students will learn skills like 2D and 3D modeling, assembly of parts, and analysis of modeled parts. The corresponding lab is also described which provides hands-on training on various CAD/CAE software like SolidWorks, CATIA, Pro/E, and ANSYS.
This document outlines a course on Computer Aided Design and Analysis. The purpose is to teach students how to use computers as a design tool in mechanical engineering. It is a 3 credit course with 5 units covering topics like CAD modeling, curves and surfaces, graphics concepts, CAD standards, and finite element analysis. Students will learn skills like 2D and 3D modeling, assembly of parts, and analysis of modeled parts. The corresponding lab is also described which provides hands-on training on various CAD/CAE software like SolidWorks, CATIA, Pro/E, and ANSYS.
This document outlines a course on Computer Aided Design and Analysis. The purpose is to teach students how to use computers as a design tool in mechanical engineering. It is a 3 credit course with 5 units covering topics like CAD modeling, curves and surfaces, graphics concepts, CAD standards, and finite element analysis. Students will learn skills like 2D and 3D modeling, assembly of parts, and analysis of modeled parts. The corresponding lab is also described which provides hands-on training on various CAD/CAE software like SolidWorks, CATIA, Pro/E, and ANSYS.
This document outlines a course on Computer Aided Design and Analysis. The purpose is to teach students how to use computers as a design tool in mechanical engineering. It is a 3 credit course with 5 units covering topics like CAD modeling, curves and surfaces, graphics concepts, CAD standards, and finite element analysis. Students will learn skills like 2D and 3D modeling, assembly of parts, and analysis of modeled parts. The corresponding lab is also described which provides hands-on training on various CAD/CAE software like SolidWorks, CATIA, Pro/E, and ANSYS.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 5
15ME207
Co-requisite: Prerequisite: Data Book / Codes/Standards Course Category Course designed by Approval PURPOSE
L 3
COMPUTER AIDED DESIGN AND ANALYSIS
P 0
C 3
NIL NIL Nil P PROFESSIONAL CORE Department of Mechanical Engineering -- Academic Council Meeting -- , 24th March 2016
DESIGN
To study how computer can be used as a tool in mechanical engineering design.
INSTRUCTIONAL OBJECTIVES At the end of the course, student will be able to 1. Apply concepts of modeling in 2D and 3D 2. Use Mathematical Representation for curves and surfaces 3. Use concepts of Computer Graphics 4. Use relevant CAD Standards 5. Use computer as a tool in analysis Session
Description of Topic
STUDENT OUTCOMES a a a
k Contact hours
UNIT I: INTRODUCTION TO CAD
1.
Definition, History and Benefits of Computer Aided Design
2.
Product Life Cycle
3.
Design process (Shigley, Pahl &Beitz and Oshuga )
4.
Coordinate Systems
5.
Wire frame modeling
6.
Surface modeling
7.
Solid modeling, Constructive Solid Geometry and Boundary Representation
8.
Feature Entities and Representation.
UNIT II: - REPRESENTATION OF CURVES AND SURFACES
9.
Mathematical representation of lines, circle, ellipse & parabola
10.
Cubic Spline Curve
11.
Bezier Curve and B-spline Curve.
12.
Curve Fitting Techniques
13.
Bicubic surface.
14.
Bezier Surface and B-spline Surface.
UNIT III: GRAPHICS CONCEPTS
Transformations: Translation, Scaling, Rotation and Reflection
15.
T 0
C-DI-O
C C C C C C C C
C C C C C C
IOs
Reference
1,2
3,8
1,2
1,5
1,2,5,8
1,2,3
1,2
1,8
1,3,8
1,3,8
1,3,8
1,3,8
1,3,8
1,2,10
16.
Concatenated and Inverse Transformations
17.
Orthographic, Isometric and Perspective Projections
18.
Cohen Sutherland Clipping Algorithm
19.
Hidden line removal, Visibility Techniques, Priority and Area-oriented
Algorithm.
20.
Hidden Surface removal, z-Buffer and Warnocks Algorithm
21.
Coloring and Shading
UNIT IV:CAD STANDARDS AND RECENT TECHNOLOGY
22.
Introduction to Data exchange standards
23.
Data exchange standards: IGES,STEP,DXF and CALS
24.
GKS,GKS-3D,PHIGS and NAPLPS
25.
Rapid Prototyping and its types
26.
Animation Types and Techniques
27.
Simulation Technique
UNIT V:FINITE ELEMENT ANALYSIS
28.
Introduction to FEA and Steps involved in FEA.
29.
Shape function for 1 D element linear (2 nodes) and quadratic (3 nodes)
30.
Derivation of element stiffness matrics,Assembly of element stiffness matrics
and load vectors,Solution techniques.
31.
Simple problems in stepped bar subjected to axial loads
32.
Problems in simple structural members for triangular element
Analysis of springs and Simple Problems
Procedure for Finite Element Modeling
C C C C C C
C C C C C
1,2,10
1,2
2,10
1,8,10
1,8
1,2,3
1,2,3,8
2,3,8
1,2,4,8
1,2,4
33. 34.
C C C C,D C,D C,D C
45
LEARNING RESOURCES Sl. TEXT BOOKS No. 1. Ibrahim Zeid, Mastering CAD /CAM (Sie ), Tata Mcgraw-Hill, New Delhi, 2010 REFERENCE BOOKS/OTHER READING MATERIAL 2. P.N. Rao, CAD/CAM Principles and Application,3rd Edition, Tata Mcgraw-Hill, New Delhi, 2012 3. Chris Mcmahon and Jimmie Browne, CAD/CAM, Adision Wesly, NewYork, 2000 4. Chandupatla and Belagundu, Introduction to Finite Element Methods in Engineering, Prentice Hal of India Private Limited, New Delhi, 2011 5. Radhakrishnan.P, Subramanyan.S and Raju.V, CAD/CAM/CIM, New Age International Publishers, 2000. 6. Ibrahim Zeid, CAD/CAM Theory and Practice, Tata McGraw-Hill Publishing Co. Ltd., New Delhi, 2010. 7. Newman and Sproul R.F, Principles of interactive computer graphics, Tata Mcgraw-Hill, New Delhi, 2007. 8. K.Lalit Narayan,K.Mallikarjuna Rao and M.M.M.Sarcar, Computer Aided Design and Manufacturing, Prentice Hal of India Private Limited, New Delhi, 2013. 9. Mikell P. Groover, Emory W. Zimmers Jr., CAD/CAM:Computer Aided Design and Manufacturing, Prentice Hall of India Private Ltd., New Delhi, 2008. 10. Donald Hearn and Pauline Baker M, Computer Graphics C version , 2nd Edition, Pearson education.
15ME207L Co-requisite: Prerequisite: Data Book / Codes/Standards Course Category Course designed by Approval PURPOSE 6. 7. 8. 9. Sl. No.
L 0
COMPUTER AIDED DESIGN LAB
15ME207 Nil PSG Data Book P PROFESSIONAL CORE Department of Mechanical Engineering 23rd Academic Council Meeting , May 2013
T 0
P 2
C 1
DESIGN ENGINEERING
To provide hands-on training to the students on various software in Mechanical Engineering.
INSTRUCTIONAL OBJECTIVES able
Drafting practice using computer. Modeling of 2D and 3D parts. Assembly of modeled parts. Analysis of modeled parts.
a a a a
STUDENT OUTCOMES k k b j k b e K
Contact hours
C-D-I-O
IOs
Reference
Drafting the Orthographic views of mechanical component.
36.
Introduction of Solid modeling software SolidWorks (Commercial
Software)
37.
Modeling of simple mechanical components with basic features
38.
Modeling and assembly of mechanical joints
39.
Conversion of 3D to 2D and mass property calculations
40.
Introduction of Solid modeling software CATIA
41.
Modeling of mechanical components with basic features
3,4
42.
Modeling of mechanical components using sweep and loft feature
3,4
43.
Introduction of Solid modeling software Pro/E
44.
Modeling of temporary fastener (Bolt and Nut)
45.
Modeling of mechanical components using variable sweep, blend and loft
features
46.
Analysis of a stepped bar subjected to axial load using spread sheet
47.
Introduction of Finite Element Analysis software Ansys
48.
Structural analysis of beams
49.
Structural analysis of a plate
50.
Thermal Analysis of plate with hole
51.
Kinematic Analysis of mechanisms
52.
Demonstration of Rapid Prototyping
35.
Description of experiments
Total contact hours
LEARNING RESOURCES Sl. REFERENCES No.
30
11. Laboratory Manual 12. Design Data (PSG), PSG College of Technology, Kalaikathir Achchagam 13. http://www.3ds.com/ 14. http://www.3ds.com/products-services/enovia 15. http://www.solidworks.in/ 16. http://www.mece.ualberta.ca/tutorials/ansys/ 17. http://www.mscsoftware.com/page/adams-tutorial-kit-mechanical-engineering-courses 18. http://learningexchange.ptc.com/tutorials/listing/product_version_id:44 Course Nature Practical Assessment Method (Weightage 100%) Assessment Experiments Record MCQ/Quiz/Viva Voce Model Examination In-semester Tool Weightage 40% 5% 5% 10% End Semester Examination Weightage
