Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 225 views

    Ejercicio Rip Ospf Eigrp Redistribucion RM DL PDF

    Uploaded by

    Jean Pierre Villamar Pino
    This document configures routing protocols (OSPF, RIP, EIGRP) and redistribution between them on routers R1-R4. R1 has multiple loopback interfaces and is configured for RIP. R2 has loopback interfaces in multiple OSPF areas and redistributes RIP into OSPF. R3 redistributes OSPF into RIP and EIGRP, and R4 runs EIGRP and summarizes routes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Ejercicio Rip Ospf Eigrp Redistribucion RM DL PDF

    Uploaded by

    Jean Pierre Villamar Pino
    225 views6 pages
    This document configures routing protocols (OSPF, RIP, EIGRP) and redistribution between them on routers R1-R4. R1 has multiple loopback interfaces and is configured for RIP. R2 has loopback interfaces in multiple OSPF areas and redistributes RIP into OSPF. R3 redistributes OSPF into RIP and EIGRP, and R4 runs EIGRP and summarizes routes.

    Original Title

    EJERCICIO RIP OSPF EIGRP REDISTRIBUCION RM DL.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document configures routing protocols (OSPF, RIP, EIGRP) and redistribution between them on routers R1-R4. R1 has multiple loopback interfaces and is configured for RIP. R2 has loopback interfaces in multiple OSPF areas and redistributes RIP into OSPF. R3 redistributes OSPF into RIP and EIGRP, and R4 runs EIGRP and summarizes routes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    225 views6 pages

    Ejercicio Rip Ospf Eigrp Redistribucion RM DL PDF

    Uploaded by

    Jean Pierre Villamar Pino
    This document configures routing protocols (OSPF, RIP, EIGRP) and redistribution between them on routers R1-R4. R1 has multiple loopback interfaces and is configured for RIP. R2 has loopback interfaces in multiple OSPF areas and redistributes RIP into OSPF. R3 redistributes OSPF into RIP and EIGRP, and R4 runs EIGRP and summarizes routes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    EJERCICIO RIP OSPF EIGRP REDISTRIBUCION RM DL

    =======R1=========

    interface loopback 0

    enable

    ip address 192.168.48.1 255.255.255.0

    configure terminal

    exit

    hostname R1
    interface loopback 1
    line console 0

    ip address 192.168.49.1 255.255.255.0

    password cisco

    exit

    login
    exit

    interface loopback 2

    network 192.168.51.0

    ip address 192.168.50.1 255.255.255.0

    network 12.0.0.0

    exit

    no auto-summary
    end

    interface loopback 3

    wr

    ip address 192.168.51.1 255.255.255.0


    exit

    ============R2===========
    enable

    interface serial 0/0

    configure terminal

    ip address 12.0.0.1 255.255.255.252

    hostname R2

    clock rate 64000


    no shutdown

    line console 0

    exit

    password cisco
    login

    access-list 10 deny 192.168.30.0


    0.0.0.255

    exit

    access-list 10 deny 192.168.40.0


    0.0.0.255

    interface loopback 4

    access-list 10 permit any

    ip address 192.168.25.1 255.255.255.0


    ip ospf network point-to-point

    router rip

    exit

    version 2
    distribute-list 10 in

    interface loopback 5

    passive-interface default

    ip address 192.168.35.1 255.255.255.0

    no passive-interface serial 0/0

    ip ospf network point-to-point

    network 192.168.48.0

    exit

    network 192.168.49.0
    network 192.168.50.0

    interface serial 0/0


    ip address 23.0.0.1 255.255.255.0
    clock rate 64000
    no shutdown

    network 192.168.25.0 0.0.0.255 area 1


    network 192.168.35.0 0.0.0.255 area 1
    end
    wr

    exit

    ==========R3========
    interface serial 0/1
    enable
    ip address 12.0.0.2 255.255.255.252
    configure terminal
    clock rate 64000
    hostname R3
    no shutdown
    exit
    line console 0
    password cisco
    router rip
    login
    version 2
    exit
    redistribute ospf 1 metric 4
    passive-interface default
    interface loopback 6
    no passive-interface serial 0/1
    ip address 192.168.8.1 255.255.255.0
    network 12.0.0.0
    ip ospf network point-to-point
    exit
    exit

    router ospf 1
    interface loopback 7
    distance ospf intra-area 105 inter-area
    115 external 175
    redistribute rip subnets metric-type 1
    metric 50000
    passive-interface default
    no passive-interface serial 0/0
    network 23.0.0.0 0.0.0.255 area 0

    ip address 192.168.9.1 255.255.255.0


    ip ospf network point-to-point
    exit

    interface loopback 8

    nterface serial 0/1

    ip address 192.168.10.1 255.255.255.0

    ip address 23.0.0.2 255.255.255.0

    ip ospf network point-to-point

    clock rate 64000

    exit

    no shutdown
    exit

    interface loopback 9
    ip address 192.168.11.1 255.255.255.0

    access-list 1 permit 192.168.35.0


    0.0.0.255

    ip ospf network point-to-point


    exit

    interface loopback 10

    access-list 1 permit 192.168.25.0


    0.0.0.255

    router-map redis-ospf deny 10

    ip address 192.168.30.1 255.255.255.0

    match ip address 1

    ip ospf network point-to-point

    exit

    exit
    route-map redis-ospf permit 20
    interface loopback 11

    exit

    ip address 192.168.40.1 255.255.255.0


    ip ospf network point-to-point

    router ospf 1

    exit

    area 2 range 192.168.8.0 255.255.252.0


    redistribute eigrp 65500 subnets

    interface serial 0/0

    passive-interface default

    ip address 34.0.0.1 255.255.255.0

    no passive-interface serial 0/1

    clock rate 64000

    network 23.0.0.0 0.0.0.255 area 0

    no shutdown

    network 192.168.8.0 0.0.0.255 area 2

    exit

    network 192.168.9.0 0.0.0.255 area 2


    network 192.168.10.0 0.0.0.255 area 2

    network 192.168.11.0 0.0.0.255 area 2

    interface loopback 12

    network 192.168.30.0 0.0.0.255 area 3

    ip address 192.168.56.1 255.255.255.0

    network 192.168.40.0 0.0.0.255 area 3

    exit

    exit
    interface loopback 13
    router eigrp 65500

    ip address 192.168.57.1 255.255.255.0

    no auto-summary

    exit

    redistribute ospf 1 metric 1544 2000 255


    1 1500 route-map redis-ospf

    interface loopback 14

    passive-interface default
    ip address 192.168.58.1 255.255.255.0
    no passive-interface serial 0/0
    exit
    network 34.0.0.0 0.0.0.255
    end
    interface loopback 15
    wr
    ip address 192.168.59.1 255.255.255.0
    exit

    ============R4============
    enable
    configure terminal
    hostname R4

    interface serial 0/1


    ip summary-address eigrp 65500
    192.168.56.0 255.255.252.0
    ip address 34.0.0.2 255.255.255.0

    line console 0

    clock rate 64000

    password cisco

    no shutdown

    login

    exit

    exit

    router eigrp 65500


    no auto-summary
    distance eigrp 95 165
    passive-interface default
    no passive-interface serial 0/1
    network 34.0.0.0 0.0.0.255
    network 192.168.56.0 0.0.0.255
    network 192.168.57.0 0.0.0.255
    network 192.168.58.0 0.0.0.255
    network 192.168.59.0 0.0.0.255
    end
    wr

    You might also like