NUMBER 104

Fal l 20 08

Cracking the Bottom of the Barrel with MIDAS Technology

Break the bottom of your barrel with Grace Davison's MIDAS FCC catalyst.

F C C

C a t a l y s t

Grace Davison Refining Technologies

Grace Davison's revolutionary MIDAS -300 catalyst is commercially proven to upgrade the bottom of your FCC barrel. Designed by Grace Davison specifically for today's diesel-driven market, MIDAS -300 offers high activity matrix surface area, balanced with an optimized zeolite level. MIDAS -300 FCC catalyst is just the latest result of our 60+ year commitment to understanding bottoms cracking mechanisms and catalysts. Contact us for information on how Grace Davison can provide catalytic solutions to your bottoms cracking needs.

Grace Davison Refining Technologies 7500 Grace Drive Columbia, Maryland USA 21044 +1.410.531.4000 +1.410.531.8246 (fax) www.e-catalysts.com

A message from the editor...

Dear Refiners: As the demand for diesel fuel grows, many of you are faced with the challenge of re-optimizing your operations to maximize light cycle oil (LCO) yield. This issue of the Catalagram is devoted to strategies for our customers to tap the bottom of the barrel and expand their LCO output and then process this feed for maximum ultra low sulfur diesel (ULSD) yield. Grace Davison has recently commercialized a max LCO version of our industry-leading MIDAS FCC catalyst technology. MIDAS-300, together with the operating strategies presented here, will allow any refiner to ensure profitable maximum LCO operations while maintaining high C3+ liquid yield and gasoline octane. For an additive approach, BX-450 can help maximize distillate yield. Hydroprocessing LCO from the FCCU, as well as synthetic crudes and other pre-processed streams, can present problems that impact unit performance. As discussed in the article Maximizing ULSD Unit Performance when Processing LCO and other Previously Processed Feeds, ADVANCED REFINING TECHNOLOGIES can work closely with refining technical staff to help plan for processing these opportunity feeds. If you want more information on the best catalysts and strategies for bottom-of-the barrel upgrading, contact your Grace Davison technical sales representative or me at joanne.deady@grace.com.

Joanne Deady
Vice President Marketing/R&D Grace Davison Refining Technologies

James J. Blazek passed away on August 25, 2008 in Reisterstown, Maryland at the age of 78. Jim worked for Grace Davison from 1957 until his retirement in 1994. Anyone who works in the FCC business has been touched by Jim's work at some point. Shortly after joining Grace Davison, he formed the first Technical Service Team in the industry. A half-century later, refiners worldwide rely on Grace Davison's Technical Service to optimize their operations. Jim was also instrumental in starting the Catalagram in 1959, as well as the Equilibrium Catalyst Analysis Program in the late 1950's at Grace Davison. In the early 1970's, Jim also co-wrote and edited the first "Grace Davison Guide to Fluid Catalytic Cracking" (known as the "Silver Bullet") that served as the basis for our widely-used, three-part Guide of the same name. He received his B.S.Ch.E. from Purdue University and worked for Atlantic Refining In Philadelphia, PA. He served in the U.S. Army during the Korean War. Following his military service, Jim worked for Standard Oil of New Jersey's Esso Refinery in Baltimore, MD until he joined Grace Davison. Jim co-authored numerous technical articles and papers during his years here. His wife, Terry, passed away in 1999. Jim and Terry are survived by their son, Matt, who works at Grace Davison's Columbia, MD headquarters in FCC R&D; daughter, Barbara Regan, and sons, Jim and Paul. Jim hired and mentored some of the best talent in the FCC business during his time here. He continued to encourage and inspire us until his passing. He and his wife, Terry, were well-loved and well-respected members of our Grace Davison FCC "Family."

IN THIS ISSUE
NUMBER 104 Fal l 2 0 0 8

Cracking the Bottom of the Barrel with MIDAS Technology

CATALAGRAM 104 Fall 2008 Managing Editor:

Joanne Deady

Maximizing FCC Light Cycle Oil Operating Strategies: Introducing MIDAS-300 Catalyst for Increased LCO Selectivity By David Hunt, Rosann Schiller, and Matthew Chang, Grace Davison Refining Technologies Maximizing LCO yield is largely a slurry management process. Refiners can reduce FCC operating severity, optimize fractionator conditions, and/or change feedstocks in a effort to increase LCO yields. Grace Davisons experienced technical service engineers can assist with these unit-specific optimizations. LCO volume yield could be further increased with Grace Davisons new MIDAS-300 catalysts. Our new technology is also available in a specially formulated additive. BX-450, the industrys first LCO maximization additive.

Contributors:
David Hunt Rosann Schiller Matthew Chang Brian Watkins Larry Langan Kristen Wagner

Maximizing ULSD Unit Performance when Processing LCO and other Previously Processed Feeds By Brian Watkins, Advanced Refining Technologies ULSD has evolved from simply meeting the diesel sulfur specification to a constant awareness of unit performance in order to process difficult streams such as FCC light cycle oil (LCO) and other thermally cracked stocks; synthetic crudes; and various other pre-processed feed sources. It is important to understand the impacts of processing new feed streams, and this paper highlights a few examples demonstrating significant differences in feed reactivity, which are not necessarily anticipated from the usual bulk feed analyses.

Please address your comments to betsy.mettee@grace.com

Grace Davison Issues New Shipping Guidelines for Hydrocarbon Samples By Larry Langan, Grace Davison Refining Technologies This article provides an overview of the shipping guidelines recommended by Grace Davison for materials being sent to U.S. locations for analysis and testing from customers and potential customers.

14

Answers to Questions from the 2008 NPRA Q&A Session-FCC Section By Kristen Wagner, Grace Davison Refining Technologies

18

Grace Davison Refining Technologies

7500 Grace Drive Columbia, MD 21044 410.531.4000

www.e-catalysts.com
The information presented herein is derived from our testing and experience. It is offered, free of charge, for your consideration, investigation and verification. Since operating conditions vary significantly, and since they are not under our control, we disclaim any and all warranties on the results which might be obtained from the use of our products. You should make no assumption that all safety or environmental protection measures are indicated or that other measures may not be required. rev.1/09

2008
W. R. Grace & Co.-Conn.

Maximizing FCC Light Cycle Oil Operating Strategies Introducing MIDAS-300 Catalyst for Increased Selectivity

David Hunt
FCC Technical Service Manager

Rosann Schiller
Product Manager, Base Catalysts

Matthew Chang
Product Manager, Light Olefins Grace Davison Refining Technologies Columbia, MD USA

race Davison Refining Technologies announces new MIDAS catalyst technology designed to tap the value at the bottom of the barrel and maximize unit profitability with higher LCO yield. MIDAS-300 FCC catalyst is the latest result of Grace Davisons 60+ year commitment to defining bottoms cracking mechanisms and catalysis. MIDAS-300, together with the operating strategies presented here, will allow any refiner to ensure profitable maximum LCO operations while maintaining high C3+ liquid yield and gasoline octane.

low sulfur diesel (ULSD) is equivalent to or exceeds the value of gasoline. Demand shifts have meant new objectives for FCC units, shifting production away from gasoline and towards LCO (light cycle oil). Designed to produce high volumes of gasoline, many FCC units are now being re-optimized to boost yields of LCO to meet the increased distillate demand. Since 2002, the growth in distillate demand has been more than double that of gasoline (Figure 1). This trend is not occurring only in the United States and developed regions, but also in developing regions such as South America, the former Soviet Union, Middle East Catalagram 104 Fall 2008 1

Adoption of clean fuel standards in the United States shifted economic conditions such that the value of ultra

Figure 1 United States Gasoline and Distillate Demand

115%

Gasoline
110%

Distillate

105%

100%

95%

2002

2003

2004

2005

2006

2007

Year

Source: U.S. Department of Energy, Energy Information Administration

Figure 2 Global Distillate Share and Growth Rates Through 2013

and Asia Pacific (Figure 2). Future demand of distillate relative to gasoline in North America is expected to increase, as shown in Figure 3, largely due to the Energy Independence and Security Act of 2007. New Corporate Average Fuel Economy (CAFE) standards require auto manufacturers to boost fuel mileage to 35 mpg by 2020. This applies to all passenger automobiles, including light trucks. To meet this challenging fuel mileage standard, more efficient vehicles powered by hybrid and diesel engines are expected. The Energy Independence and Security Act also requires the total amount of biofuels added to gasoline to increase to 36 billion gallons by 2022, up from 4.7 billion gallons in 2007. Technical Challenges The primary challenge in the FCC unit is increasing LCO, yet minimizing any incremental slurry yield. Figure 4 shows how LCO and slurry yield change with conversion. LCO, like gasoline, is an intermediate product increasing with conversion at very low conversion levels, eventually reaching an over-cracking point. Past the over-cracking point, LCO yield declines with increasing conversion. This high conversion regime represents the traditional FCC unit-operating window. The optimal LCO yield may not be at the maximum LCO point due to increased amounts of slurry at lower conversion. As a result, maximizing LCO yield is largely a slurry management process. Refiners tend to focus on the following strategies to maximize LCO production: 1. Operating Conditions LCO and gasoline cut point shifts Reactor and feedstock temperatures and equilibrium activity optimization 2. Recycle Streams Heavy Cycle Oil (HCO) or slurry

Percentage Change from 2002

Share of Global Distillate

3.50%

3.00%

3.00%

2.90%

2.10%

2.20% 2.00%

Source Hart Energy Consulting based on 2007 IEA data

Figure 3 North America Gasoline to Distillate Demand Ratio

Gasoline to Distillate Ratio

2.13

2.11 1.88 1.77 1.68

1995

2000

2006

2010

2015

Source: Hart Energy Consulting Analysis and Forecast 2007

www.e-catalysts.com

Growth Rate

LCO and Slurry, vol.%

3. Feedstock Removal of diesel range material from the FCC feedstock Feed hydrotreater severity optimization Residual feedstock optimization 4. Catalyst Optimization Increasing bottoms conversion Maintaining C3+ liquid yield and gasoline octane In the following sections we discuss these commonly employed operating strategies to increase FCC LCO yield and unit profitability. Operating Conditions Gasoline end point reduction is the most common operating strategy for increased LCO production. Approximately 10% of the gasoline can be moved to LCO by reducing the gasoline cut point from 430F to 350F TBP , limited often by a minimum main fractionator top temperature and maximum LCO flash point. The LCO cut point should be increased within the maximum main fractionator bottoms temperature and diesel hydrotreater constraints. Many refiners operate with LCO endpoints near 700F . Figures 5, 6 and 7 shows the effect of reactor temperature, feedstock temperature and equilibrium catalyst (Ecat) activity on the yield of LCO and slurry yield. (These data were generated using a commercial FCC model). Operating at lower conversion (by re-optimizing these operating conditions) can increase LCO. Figures 5-7, like Figure 4, confirm that the true challenge of maximum LCO operations is minimizing incremental slurry yield. Air blower and wet gas compressor demand is reduced at lower reactor temperature or higher feed temperatures. As a result, the refinery may choose to increase feed rate or introduce a recycle stream to push the unit back to an operating constraint during maximum LCO operations.

Figure 4 LCO and Slurry Selectivity

LCO

Slurry

Conversion, vol.%

Figure 5 Reducing Reactor Temperature Increases LCO and Slurry Yields

LCO

Slurry

Reactor Temperature, F

Figure 6 Raising Feed Temperature Increases Both LCO and Slurry Yields

LCO, vol.%

LCO

Slurry

Feed Temperature, F

Slurry, vol.%

Slurry, vol.%

LCO, vol.%

Catalagram 104 Fall 2008

Recycle Operating with a recycle stream of 700+ F material can increase LCO yield without producing incremental slurry yield during lower conversion operations. HCO in the 700-850F range is preferred over slurry (700F+) due to its lower conradson carbon and higher saturate content. Table I shows pilot plant data where HCO was cracked neat over Ecat. The HCO feed had an API gravity of 10, carbon level of 0.1 wt.%, and an endpoint of 790F . At a reactor temperature of 970F and an Ecat microactivity (MAT) of 72%, conversion was only 37 wt.%, yet resulted in 33 wt.% LCO and 19 wt.% gasoline. The coke yield is quite high for such a low conversion. Table II shows commercial data for one cat cracker that operated in both gasoline and LCO maximization modes. With recycle and lower Ecat activity, LCO increased ~14 vol%.1 Note that dry gas and coke yields also rose with increased recycle. Lower air blower and wet gas compressor demand by operating at lower reactor temperature and higher feedstock temperature, however, may allow the refinery to operate with a recycle stream. Ideally, recycle should be introduced to the riser in dedicated injectors above the fresh feed injectors. This practice increases the riser mix zone temperature for a given riser outlet temperature. Higher mixed temperature of the feedstock and catalyst at the base of riser in order to ensure good feedstock vaporization at low riser temperatures in order to minimize slurry yield. Using dedicated injectors for recycle, instead of processing the recycle through the primary fresh feed injectors, also eliminates any damage of the fresh feed injectors due to catalyst particles present in slurry recycle.

Figure 7 Lower Ecat Activity Increases LCO and Slurry Yields

LCO

Slurry

Ecat Activity, wt.%

Table I HCO Cracking Riser Pilot Plant Data

Product Dry gas LPG Gasoline LCO (430-660F) Slurry Coke

Yield (wt.%) 3.0 8.0 19.0 33.0 30.0 7.0

Table II Effect of Recycle and Lower Ecat Activity on LCO Production

Gasoline Mode Combined Feed Ratio Yields, wt.% Dry Gas LPG Gasoline (C5-420F) LCO (420 to 700F) Slurry (700F+) Coke Conversion (420F) Riser Temperature, F Feed Concarbon, wt.% ECAT Activity 3.4 15.7 43.7 22.9 (~21.3 vol.%) 8.2 6.1 69.8 950 3.75 Base 4.0 13.1 32.1 36.8 (~35.6 vol.%) 7.3 6.7 55.9 950 3.75 Base-4 1.07 Diesel Mode 1.25

www.e-catalysts.com

Slurry, vol.%

LCO, vol.%

Table III Feedstock Properties

Feedstock Feedstock Properties API Gravity Hydrogen Content, wt.% Total Saturates, wt.% Mono-Aromatics, wt.% Di-aromatics, wt.% Tri-aromatics, wt.% Tetra and Penta-aromatics, wt.%
Badoni., R.P. et al., Fuel Science and Technology IntL 13(4), 361-375, (1995)

Feedstock Feedstock composition has a very significant effect on LCO yield and quality. In general, the LCO yield and quality decline with improved feedstock quality.2 Feedstock with increased amounts of di- and tri-aromatic cores will increase the yield of LCO.3 Aromatic cores are inert to catalytic cracking and once the alky groups and naphthenic rings are cracked from the cores, the di- and tri-aromatic cores will remain in heavy cat naphtha and LCO boiling ranges (total cycle oil). Table III shows two FCC feedstocks (A and B) with similar API gravity and hydrogen content. Feedstock B, however, has higher content of di- and tri-aromatic cores but similar levels of tetra+-aromatics. Table IV shows the product yields when feedstocks A and B were cracked over a standard Ecat in a bench scale MAT reactor. Both catalysts produced similar coke and slurry. However, LCO yield was higher for feedstock B. The increase in LCO was nearly proportional to the higher amount di- and tri-aromatic cores in feedstock B.4 Refiners who hydrotreat FCC feedstock may consider re-optimizing polynuclear aromatic (PNA) saturation levels to increase LCO yield. Figure 8 shows the effect of feedstock PNA saturation on LCO and slurry yields at constant coke yield. An ACE unit was used to generate this data by cracking three FCC feedstocks produced over a range of hydrotreating severities. Lower hydrotreating severity will increase the amount of di- and tri-aromatics in the FCC feedstock and consequently raise the LCO yield. Tetra+ aromatics also increase at lower severity, which can lead to additional slurry yield. Figure 8 also illustrates how an optimized catalyst system can be used

27.6 13.53 59.5 17.8 10.5 1.9 2.1

28.1 13.59 52.6 17.8 13.4 4.3 3.2

Table IV Feedstock Effects - MAT Results Using a Standard Ecat

Feedstock Yields (wt.% Feed) Dry Gas LPG Gasoline (C5-300F) LCO (300-700F) Slurry (700F+) Coke
Badoni., R.P. et al., Fuel Science and Technology IntL 13(4), 361-375, (1995)

1.1 16.4 29.2 44.7 5.6 3.1

1.5 17.1 13.7 58.6 5.7 3.3

Figure 8 Effect of PNA Saturation on LCO and Slurry Yields

8.0 24.0 22.0 20.0 7.5 7.0

LCO, wt.%

18.0 16.0 14.0 12.0 10.0 8.0 15.0

Optimized Catalyst LCO Slurry

6.0 5.5 5.0 4.5 4.0 3.5 3.0 17.0 19.0 21.0 23.0

FCC Feed PNA Content, %

Slurry, wt.%

6.5

Catalagram 104 Fall 2008

Table V Maximize Product Value with MIDAS-300

Case Catalyst Reactor Temperature, F Yield, vol.% FF Conversion LPG Gasoline LCO Slurry C3+ RON MON Incremental $/bbl 74.6 33.4 51.5 20.1 5.3 110.3 91.0 80.0 Base 72.8 31.9 50.7 22.0 5.2 109.8 91.2 80.1 $0.00 72.8 34.4 48.8 22.9 4.3 110.4 93.2 81.1 $1.50 Base Base Base 1 Traditional LCO Catalyst Base 2 MIDAS-300 with OlefinsMax Base

Maximizing LCO Yield with MIDAS-300 The different types of reactions involved in cracking the bottom of the barrel require different catalyst functionalities. Overall, a balanced approach is required to achieve maximum bottoms upgrading. The goal is to convert the bottoms to higher value products and not coke. Premium Grace Davison MIDAS catalysts have been proven to reduce slurry yield without a coke or gas penalty5 and we have recently commercialized MIDAS-300 catalyst specifically designed for todays distillate driven market. MIDAS-300 catalyst is the result of Graces long commitment to defining bottoms cracking mechanisms and catalysis. This research project produced the MIDAS-100 series of catalysts in 2005. In 2007, Grace Davison introduced the MIDAS-200 series for increased activity. Today, we are pleased to announce the development of MIDAS-300 series, designed to maximize LCO selectivity and bottoms cracking. MIDAS-300 catalysts offer high activity matrix surface area, balanced with an optimized zeolite level. This new formulation maximizes LCO selectivity via the threestep bottoms cracking mechanism (Figure 9). The majority of matrix porosity in MIDAS-300 catalysts is found in the crucial 100-600 pore diameter range, ensuring selective cracking of heavy ends. As previously discussed, a common means to shift selectivity to gasoline+distillate rather than gasoline+LPG is to lower operating severity. Reduced reactor temperature achieves the desired increase in LCO by reducing conversion, but it comes with a price reduced cracking temperature also reduces feed vaporization, allowing unvaporized liquid hydrocarbons to bypass the riser and condense as coke in the reactor vessel.

to crack incremental slurry to LCO. Hydrotreated feeds contain higher levels of naphthenoaromatics than typical gasoils. The proper design of matrix activity is a crucial factor in optimizing the catalyst feed interaction. In this example LCO is increased by ~4 wt.% through a combination of lower VGO hydrotreating severity and an FCC catalyst reformulation. C3+ Liquid Yield and Gasoline Octane We have focused primarily on the means to increase LCO yield while mitigating the incremental slurry yield that is associated with severity changes. Maintaining liquid yield and gasoline octane during maximum LCO operation is equally critical to ensure overall profitability. Grace Davisons OlefinsMax additive can be used to achieve the desired octane levels at lower reactor temperature. OlefinsMax additive is currently the most widely used ZSM-5 additive technology in the refining industry, enabling refiners to substantially increase yields of valuable light olefins, as well as the octane value of the FCC naphtha. 6

Operating at reduced conversion to maximum LCO will reduce the volume expansion of the FCC due to the higher density of LCO relative to gasoline and LPG. Table V shows three yield cases. Case 1 represents a traditional catalyst reformulation for reduced activity that increases LCO yield at the base reactor temperature. Case 2 is an operation with Grace Davisons MIDAS-300, our maximum LCO catalyst and OlefinsMax additive. Despite a two volume percent increase of LCO in Case 1 and less slurry, the product value is neutral compared to the base operation due to lower C3+ total liquid yield. The MIDAS-300 operation in Case 2 shows an increase product value of $1.50/bbl over the base due to enhanced bottoms cracking, higher LCO yield, similar C3+ liquid yield, and higher gasoline octane. In this case, OlefinsMax additive was added until a wet gas compressor constraint was reached, increasing C3+ liquid yield over the Case 1 operation. Recent 2008 Gulf Coast economics, with a 40/gallon incremental value of LCO over gasoline, were used.

www.e-catalysts.com

Feed vaporization must be maintained when operating at reduced cracking severity. At low operating severity, optimization of Type I cracking becomes more critical due to the reduction in mix zone temperature. Catalyst design plays an important role in maintaining the right conditions. Since resid feeds contain a high percentage of molecules boiling above mix zone temperature, pre-cracking is necessary to achieve complete vaporization. Porosity in the 100-600 range is essential for the pre-cracking reactions that facilitate vaporization.6 MIDAS-300 catalysts have the highest porosity in this critical range of any cracking catalyst, ensuring that feed is properly vaporized even at low severity. Most of the LPG and gasoline produced in an FCC comes from dealkylation of aromatics or Type II cracking. Zeolite is much more effective than matrix in cracking long chain alkyl aromatics. Type II cracking is important to reduce the molecular size and promote eventual conversion of bottoms; however, we must prevent any LCO that is produced from being over-converted to lighter components. The zeolite level in MIDAS-300 has been optimized to provide sufficient dealkylation activity yet maintain the product yield as distillate rather than LPG and gasoline. Finally, Type III cracking destroys naphthene rings in naphthenoaromatic compounds. The size of typical naphthenoaromatic molecules is too large to easily fit into the zeolite. The cracking of these molecules will occur on the matrix sites or on the external surface of the zeolite. The selective cracking of this type of molecule requires the proper design of matrix activity and the interaction of matrix and zeolite. The high mesoporosity of MIDAS300 catalysts improves LCO selectivity by converting coke precursors into valuable liquid product. The increased matrix activity and porosity of MIDAS-300 catalysts enhances LCO selectivity and bot-

Figure 9 Bottoms Cracking Fundamentals

Catalytic
Type II

Type III

Type I

Coke
Thermal/Catalytic

Feed

MIDAS Catalyst is the most effective catalyst for Type I and III

Type I Precracking and Feed Vaporization Type II Dealkylation of alkyl aromatics Type III Conversion of naphthenaromatics

toms cracking relative to MIDAS-100 (Table VI) while maintaining equivalent activity, light ends, gasoline and coke, increasing unit profitability by $0.31/bbl. Flexibility Grace Davison can also deliver enhanced LCO selectivity in an additive form. BX-450 additive is Graces newest catalytic additive offering and is the first of its kind designed specifically for maximum distillate yield. BX-450 additive is based on MIDAS-300 catalyst technology and offers high activity matrix surface area balanced with an optimized zeolite level to quickly maximize LCO selectivity as refining economics swing between distillate and gasoline. As described earlier, proper zeolite to matrix ratio is critical to selectively destroy bottoms and minimize coke precursors. However, to maximize LCO with an additive, the amount and type of zeolite is critical; too much zeolite and any LCO that is produced can be over-converted to lower value products. The optimized zeolite level in BX-450 additive provides sufficient catalytic activity, enabling 1:1 replacement of fresh catalyst. Commercial Performance Typically we recommend addition rates of BX-450 additive up to 20%

of overall fresh catalyst usage. However, improved selectivity has been reported with as little as 10% in inventory. Selective conversion of bottoms to LCO at constant gasoline, LPG, and coke has been demonstrated with BX-450 additive [Figure 10]. At constant conditions, 1.5 lv.% of slurry was shifted to LCO. BX-450 additive, by converting coke precursors into liquid product, actually decreased regenerator temperatures and Ecat coke factor. Using recent spot economics, the addition of 10% BX-450 additive improves profitability by $1.14/bbl. Further increases in yield can be attained through a detailed unit severity optimization. Conclusions Maximizing LCO yield is largely a slurry management process. Refiners can reduce FCC operating severity, optimize fractionator conditions, and/or change feedstocks in a effort to increase LCO yields. Grace Davisons experienced technical service engineers can assist with these unit-specific optimizations. LCO volume yield could be further increased with Grace Davisons new MIDAS-300 catalysts. MIDAS-300 Catalagram 104 Fall 2008 7

catalysts allow refiners to maximize LCO production via enhanced matrix activity and porosity that optimize the three-step bottoms cracking mechanism. MIDAS-300 catalyst technology selectively shifts slurry into LCO without a coke or gas penalty. Our new technology is also available in a specially formulated additive. BX-450, the industrys first LCO maximization additive, delivers flexibility as refining economics swing between gasoline and distillate. Contact your Grace Davison sales representative today to learn how MIDAS-300 can enhance your refinerys profitability. References
1. D. Bhattacharyya et al. Indian Oil Corporation LTD, Middle Distillate Maximization in FCC Unit 6 Encuentro Sudamericano de Craqueo Catalitico 2. Ritter et. al., Producing Light Cycle Oil in the Cat Cracker, Catalagram 69, 1984.

Figure 10 BXTM-450 Selectivity Shifts Slurry into LCO

10 8 6 4 2 0 -2 -4 -6 -8
Feed API REGEN T (F) ECAT MSA Light Ends Gasoline, lv.% LCO, lv.% Slurry, lv.% Conversion

3. Hinds, G.P . 1971, Eight World Petrol, Congr Vol. 4 pg 235. 4. Badoni., R.P . et al., Influence of Feedstock Composition on the Yield of Total Cycle Oil in Fluid Catalytic Cracking, Fuel Science and Technology IntL 13(4), 361-375, (1995)

5. Schiller, R. et al. The GENESIS Catalyst System, Catalagram 102, Fall 2007. 6. Zhao, X., et al., FCC Bottoms Cracking Mechanisms and Implications for Catalyst Design for Resid Applications; NPRA 2002, AM-02-53.

Table VI Maximum LCO Product Value

MIDAS -100 Cat/Oil C4 s & lighter Gasoline 5.8 18.1 53.6 MIDAS -300 5.8 18.1 53.6

FCC

LCO

20.5

21.0

Bottoms Coke Incremental Profit

4.5 3.3 ----

4.0 3.3 $0.31/bbl

www.e-catalysts.com

Maximizing ULSD Unit Performance when Processing LCO and Other Previously Processed Feeds

Brian Watkins
Supervisor, Hydrotreating Laboratory Services ADVANCED REFINING TECHNOLOGIES Chicago, IL USA

ith demands for increased production of ultra-low sulfur diesel (ULSD) and the rise in crude prices, unit operation and performance have become significantly more challenging. This has prompted refiners to look for ways to maximize their diesel pool by using opportunity feedstocks. However, use of these feedstocks may lead to other problems which impact unit performance. ULSD has evolved from simply meeting the diesel sulfur specification to a constant awareness of unit performance in order to process difficult streams such as FCC light cycle oil (LCO) and other cracked stocks; synthetic crudes; and various other preprocessed feed sources. It is important to understand the impact of processing new feed streams, and this paper highlights a few examples

demonstrating significant differences in feed reactivity, which are not necessarily anticipated from the usual bulk feed analyses. Background It has been documented for some time that desulfurization of dibenzothiophene and substituted dibenzothiophenes occurs through two reaction pathways: the direct sulfur abstraction route and the hydrogenation abstraction route. The former involves adsorption of the molecule on the catalyst surface via the sulfur atom followed by C-S bond scission. This path is favored when using cobalt-molybdenum (CoMo) based hydrotreating catalysts. The second pathway involves saturation of one aromatic ring of the dibenCatalagram 104 Fall 2008 9

Table I Base Feed Properties

Type SR LCO Ebullating Bed Diesel 32.24 0.143 940 40.38 32.05 8.34 Fixed Bed Diesel 30.9 0.344 479 38.54 27.28 11.26

API Sulfur, wt.% Nitrogen, ppm Aromatics, lv.% Mono-, lv.% Poly-, lv.% Dist., D86, F IBP 10% 50% 70% 90% FBP

37.72 1.096 46 22.34 14.43 7.88

15.31 1.041 837 68.81 18.44 50.37

404 470 532 558 612 678

387 462 542 598 660 712

366 440 524 552 591 637

489 538 589 614 649 704

polynuclear aromatic compounds relative to other feeds. The amount of LCO blended into the diesel hydrotreater has a much greater effect on catalyst performance when producing ULSD than when operating under prior, less restrictive, low-sulfur regulations. Use of diesel range products from ebullating bed resid or fixed bed resid desulfurizers can also have a significant impact on catalyst activity if not clearly identified as to their origin. The general properties of diesel streams from these units often indicate that they may be fairly easy to hydrotreat due to their unusually low sulfur content. Table I lists the general properties for examples of each of the base feeds used in pilot testing at ART. Note that Ebullating Bed Diesel represents a diesel fraction from the product of an LC-FINER or H-Oil Unit, and Fixed Bed Diesel is the diesel fraction coming from a Fixed Bed Resid Unit. The diesel product from an Ebullating Bed Resid (EB) Unit and the Fixed Bed Resid (FB) Unit provide very different sulfur distribution patterns compared to the other feeds in Figure 1. It is clear that

zothiophene species followed by the extraction of the sulfur atom. Nickel-molybdenum (NiMo) catalysts have a higher selectivity for desulfurization via this route. It is both expedient and efficient to model ULSD kinetic schemes by grouping the various sulfur species into easy sulfur and hard sulfur categories. The so-called easy sulfur is made up of compounds which are readily desulfurized via direct abstraction and boil below about 680F , while hard sulfur is made up of compounds which are more readily removed via hydrogenation followed by abstraction. These compounds include 4,6 dimethyl-dibenzothiophene and other di- and trisubstituted dibenzothiophenes. The relative amounts of easy and hard sulfur in a feed are critical properties to consider since the concentration of each can vary significantly from feed to feed depending on crude source, boiling range and the prior thermal or catalytic treatment of the feedstock. Further details can be found in the 2007 ERTC paper by ART entitled SmART Strategies for Maximizing ULSD Unit Performance: Tuning Hydrogen Utilization for Flexibility with Cracked Stocks.

The use of thermal or catalytic treatment of feedstocks that will be sent to a ULSD unit can have varying effects depending on the severity of the pretreatment. LCO and coker diesels have long been common elements combined with a straight run (SR) feed source to produce ULSD products. LCO generated from an FCC can vary depending on the severity of the pretreatment of the FCC feed. However, the common element is the increase in

Figure 1 Sulfur Distribution in the Four Distillate Feedstocks

4000

3000

2000

1000

zo Be

thio

phe

ne

C1

-BT

C2

-BT

C3

-BT

C4

T +B
Dib en h zo t

h io p

en

0
C1 T -D B C2 -D M T DB 4,6 T DB -DM

C3

+D

BT

SR

Fixed Bed Resid

FCC LCO

Ebullating Bed Resid

10 www.e-catalysts.com

ppm, sulfur

although the total sulfur is much lower for the two resid diesel materials, a majority of the sulfur species that are present are all the so-called hard sulfur species. To help explain how the HDS activity changes with product sulfur for these feeds, pilot work was completed using 100% SR diesel as the base feed. The individual components were blended into the base feed to show the individual, as well as some cumulative effects on catalyst performance. Two different concentrations (15% and 30% by volume) of LCO were used. The blends containing LCO produced a five to seven number decrease in API, as well as decreases in total sulfur of 2500 to 2700 ppm, respectively. Feed nitrogen content, however, increases by 150 to 250 ppm, and the total aromatic content in each of the blends increases 10 to 18 volume percent. The resid diesel streams were blended into the SR at a 25% by volume concentration. This gave a similar 1.5 to 2 number decrease in API for each of the FB and EB diesel streams, with a significant increase in total nitrogen of 120 to 220 ppm, respectively. Feed aromatic content showed a three to four number increase in mono-aromatics.

Figure 2 Comparison of EB and FB Diesel Blends in ULSD Application

Required Temperature increase, F 120 100 80 60 40 20 0
0 100 200 300 400 500 600
SR 25% EB Diesel 25% FB Diesel

Product Sulfur, ppm

At low severity hydrotreating (higher product sulfur), there is little difference between the straight run and the blended resid diesel streams. Figure 2 is a plot of the EB and FB diesel blends at different levels of sulfur removal. The impact of adding EB diesel is little more than 4F higher temperature relative to the SR, while the FB diesel required just over 10F for low sulfur products. As the product sulfur is decreased the required temperatures start to diverge: 17F higher temperature is required for the EB diesel blend feed at 200 ppm sulfur and 22F for the FB diesel. Clearly, there is a different temperature response for each feed which is most likely an indication that although the total sulfur is lower, the additional nitrogen from the EB unit is hindering the catalytic ability to saturate the more difficult sulfur compounds required to produce ULSD. The FB diesel feed also has an impact, due to the fact that it contains additional refractory sulfur which is harder to remove. As product sulfur continues to trend toward ULSD, the difference increases to over 35F . A comparison of the feedstock inspections shown in Table I shows that the two feeds are quite similar with no obvious explanation for a 30F increase in required temperature relative to the base feed to achieve ULSD sulfur levels. This underscores the importance of the source (or history) of a feedstock, and how significant this can be on unit performance. Figure 3 summarizes data using the 15% and 30% LCO feeds. The impact of even a small amount of LCO is again readily apparent. Catalagram 104 Fall 2008 11

Figure 3 Addition of LCO on ULSD Performance

160 Required Temperature Increase, F 140 120 100 80 60 40 20 0
0 100 200 300 400 500 600
SR 15% LCO 30% LCO

Product Sulfur, ppm

Figure 4 Cumulative Addition of LCO for HDS

160 Required Temperature increase, F 140 120 100 80 60 40 20 0
0 100 200 300 400 500 600
SR 25% FB Diesel 15% LCO & 25% FB 30% LCO & 25% FB

cussed above. The use of 30% LCO blended into the 25% FB feed has an impact of 28F increase in required temperature which is almost 10F lower than 30% LCO by itself. This impact can be seen through the entire range of operation as shown in Figure 4. One possible option to gain back some of the lost activity is to change the end point of the feed to be used. ART was able to conduct duplicate pilot plant testing on this same LCO, but with a 30F end point reduction to simulate how this can affect catalyst performance. Table II lists the major component analysis between the two LCO feed sources. The decrease in endpoint lowers the total sulfur by almost 1000 ppm, where total nitrogen decreases by 129 ppm. The impact this reduction has on ULSD performance is over 30F in restored catalyst activity which corresponds to additional life in the hydrotreater. A comparison of the two LCO feeds blended at 30% into the SR base feed is shown in Figure 5.

Product Sulfur, ppm

Initially about 20F higher temperature is required compared to the SR feed for 15% LCO, and 40F higher temperature is required at the 30% LCO level as compared to the base feed at 500 ppm product sulfur. Although not obvious from the chart, there are also small differences in the temperature response between the SR and LCO containing feeds. Using 15% LCO there is a 20F loss in HDS activity at 500 ppm sulfur which increases to 50F at 200 ppm sulfur and to over 90F for ULSD. With a 30% LCO blend, the activity differences are much greater: 37 F at 500 ppm sulfur increasing to 70F at 200 ppm sulfur and over 115F for ULSD. As mentioned above, this is an indication that as LCO is added to the feed, the concentration of refractory, sterically hindered sulfur compounds increases making it more difficult to desulfurize. The presence of more refractory compounds decreases the temperature response relative to the base SR feed. That means that a much larger temperature increase is required for the LCO feed to achieve the same sulfur removal as the base feed.

The effects of combining the various diesel sources are not necessarily a cumulative effect on catalyst performance. The effect of adding 15% LCO into a feedstock that already contains 25% FB diesel has only an additional 10F impact compared to the 20F increase in required temperature dis-

Table II Comparison of Boiling Point Reduction on LCO

Type LCO (Low FBP) 18.31 0.948 708 66.86 22.65 44.21 LCO (High FBP) 15.31 1.041 837 68.81 18.44 50.37

API Sulfur, wt.% Nitrogen, ppm Aromatics, lv.% Mono-, lv.% Poly-, lv.% Dist., D86, F IBP 10% 50% 70% 90% FBP

380 450 522 579 638 682

387 462 542 598 660 712

12 www.e-catalysts.com

Figure 5 Impact on FBP Reduction on Hydrotreating Performance

160
Required Temperature increase, F

140 120 100 80 60 40 20 0

0 100 200 300

SR 30% Hi FBP LCO 30% Lo FBP LCO

400

500

600

The addition of LCO has a major impact on activity for both the low and high endpoint materials. The required temperature increase for ULSD in going from 0 to 30% LCO for the lower endpoint material is about 1.2F per percent LCO. Processing the higher endpoint LCO increases the required temperature to about 1.4F per percent LCO. Notice from the chart that the activity effects are not exactly linear with increasing LCO content. The first 15% LCO has a larger impact on activity than the next 15%. Figure 6 demonstrates this more clearly in the form of a plot of activity lost as a function of LCO content. It clearly shows much higher activity losses for the first few percent LCO as compared to the last few percent added to the feed. ADVANCED REFINING TECHNOLOGIES can work closely with refining technical staff to help plan for processing opportunity feeds such as those discussed above. One of the keys is being aware of the potential impact processing certain feeds will have on unit performance. Feeds which have been previously processed present unique challenges and ART is well positioned to provide assistance on how best to maximize unit performance and take advantage of these oppor-

Product Sulfur, ppm

Figure 6 Activity Comparisons at Different LCO FBP and Concentration

Catalagram 104 Fall 2008 13

Grace Davison Issues New Shipping Guidlines for Hydrocarbon Samples

A sample that was received by Grace Davison for testing.

Introduction

Larry Langan
Senior Engineer, FCC Evaluations Grace Davison Refining Technologies Columbia, MD USA

race Davison's Columbia, MD, USA facility handles about 4000 oil samples per year from customers. Many of them arrive without incident; however, we are seeing an increase in the number of samples that are packaged improperly. The photographs accompanying this article give some examples of improperly packaged samples.

other liquids such as gas oil, feed, petroleum distillates, LCO, diesel fuel, naptha, gasoline, motor spirits, petrol, slurry oil, scrubber water etc. with proper labels, documentation and in suitable shipping containers consistent with the IATA manual and CFR49 DOT regulations. For these type of materials Grace Davison prefers 4 oz. packages for evaluation in our Oils Lab and for microactivity testing. If more extensive testing is requested, then an 8 oz. package will be acceptable. These quantities are more than adequate to perform any necessary

Acceptable Sample Sizes Grace Davisons Columbia, MD facility will accept for testing flammable and 14 www.e-catalysts.com

testing to be performed, while also eliminating the need to dispose of large quantities of unused sample. Use of smaller samples should also decrease shipment costs for our customers. The customer must use packaging that meets CFR49 DOT regulations and include a leak containment barrier. Loose sample container lids, paint cans sent improperly without lid locks, glass bottles of scrubbing water of scrubber water that freeze in the winter and boxes dripping with oil in the delivery truck are examples of why leak containment is required. For other testing and use, the sample size required may be larger or smaller. The amount to be sent to Grace Davison should be discussed in advance with the Grace Davison personnel who will receive the material. Samples larger than needed increase costs to both Grace Davison, who must dispose of the material, and to the shipper, who must pay for shipment costs. Grace Davison personnel can also be contacted to provide assistance in determining the appropriate type of container or package to maintain sample quality; however, the shipper must be aware that compliance with all applicable shipping regulation is the responsibility of the shipper.

Shipping services often use garbage bags and trash cans to contain leaking samples.

Paint can lids pop off. Cans must be used with lid retainer rings. Catalyst "trails" from leaking boxes in receiving and inside trucks are very slippery.

Vacuum crushing or lid not tight. Leaking containers are often repackaged by shipper.

Packaging, Paperwork and Labeling All samples shipped to Columbia, MD must include on the shipping papers the correct chemical identification information. This permits Grace Davison personnel to properly follow any applicable chemical handling requirements. All samples must be appropriately labeled with hazard, composition and other identification information. A relevant MSDS shipped with the samples or ref- erence to an MSDS already on file, is also required.

Cushioning inadequate for oil. Scrubber water bottle froze and burst in winter.

Catalagram 104 Fall 2008 15

It is critical that samples are shipped with proper packaging leak protection and seals as the Columbia site shipping and receiving department may reject samples that leak during transport and have them returned to the shipper. Samples that leak are also often comprised and therefore cannot be analyzed and will be immediately disposed of. Shipments from Overseas Grace Davison personnel should be informed in advance of any shipments of materials coming to Columbia, MD from overseas so that proper TSCA import certification documentation can be prepared. Failure to provide such information will slow the passage of the material through customs and can often result in the sample being refused entry into the U.S. A TSCA certification is required for import of any chemical into the U.S. It is also important to note that only U.S. citizens can authorize TSCA certifications. Most problems occur when the customer does not specify the shipping sample name with an accepted shipping regulation name. They may use something such as Unit 5 feed instead of a regulation name such as Gas Oil. Summary Compliance with all applicable shipping regulations is the responsibility of the shipper. Adoption of these shipping guidelines will ensure sample integrity and result in accurate analyses. Most important, proper packaging guarantees the safety of everyone who touches the sample.
Wild gasoline cap popped off. Cans without cap seals.

Cap screwed on the label string makes a wick.

Improperly packed, leaking sample.

Slurry in leaking paint can with catalyst MSDS and a sample without a label.

16 www.e-catalysts.com

Introducing PINNACLE-XLC: An FCC Catalyst for Even Lower Delta Coke

Grace Davison has introduced PINNACLE-XLC to the Asia Pacific Market. PINNACLE-XLC is an alumina-sol catalyst formulated with a novel zeolite technology, Grace Davisons nickel resistant matrix, TRM-400, and the commerciallyproven integral vanadium trap, IVT4, that is utilized in the IMPACT catalyst series. The alumina-sol technology platform provides excellent physical properties and catalyst retention. The proprietary zeolite modifications utilized in PINNACLE-XLC deliver enhanced stability and activity compared to previous resid processing benchmarks and shifts light ends into gasoline. Incorporation of Grace Davisons integral vanadium trap further enhances stability and activity retention, while Grace Davisons nickel resistant matrix, TRM-400, provides superior coke and gas selectivity in the presence of high levels of contaminant nickel. The overall result is an extremely stable, coke-selective catalyst offering maximum gasoline selectivity at constant coke yield in high contaminant metals operations. Based on our lab testing and commercial experience, we have found that the use of PINNACLE-XLC shows, even at high metals level, excellent activity retention (Figure 1) and better coke selectivity (Figure 2) compared to resid benchmark catalysts.

Figure 1
75 PinnacleTM-XLC Resid Benchmark MAT Conversion, % 73

71

69

67 2000

4000

6000 8000 ECAT Ni + V, ppm

10000

12000

Figure 2
5 Resid Benchmark Pinnacle-XLC
Coke Yield, wt.%

1 2000

4000

6000 8000 ECAT Ni + V, ppm

10000

12000

Catalagram 104 Fall 2008 17

Answers to Questions from the 2008 NPRA Q&A Session - FCC Section
Kristen Wagner
Product Manager, Clean Fuels Grace Davison Refining Technologies Columbia, MD USA CATALYST 33. How much gasoline sulfur reduction can be achieved with the use of additives? Have you seen sulfur reduction in the LCO fraction? How well do these additives perform? Where does the sulfur end up? a. Grace Davison gasoline sulfur reduction applications provide 20%-35% gasoline sulfur reduction commercially. Current customers have been applying this technology for an average of 2.5 years, including one refiner who has been benefiting from Davison gasoline sulfur reduction for over seven years now. Neptune catalyst, our most recent step-out GSR technology, has commercially lowered gasoline sulfur by 45%. b. In some applications, sulfur reduction has been seen in the LCO cut, but only for lower boiling point LCO fractions. Grace Davison GSR products are designed to reduce sulfur species from the gasoline boiling range. If the IBP of the LCO is low, there may be gasoline sulfur species in the LCO stream, and therefore sulfur reduction will occur. c. The sulfur that is removed from the FCC gasoline boiling range is converted to H2S in the reactor. This equates to an increase of approximately 1%-2% overall H2S generation from the FCCU. PROCESS TECHNOLOGY 37. What are the typical sulfur contents of FCC products for various FCC feed types and sulfur levels? Sulfur content of FCC products is derived from the sulfur present in the FCC feed. Gasoline sulfur typically contains 2%-10% of the FCC feed sulfur, but there are additional variables that can affect the level of sulfur in the gasoline. Those variables include the selectivity of the feed to crack into gasoline range sulfur species, the FCCU operating conditions, FCC catalyst properties, and the gasoline cut point in the main fractionator. One FCC feed type can result in different gasoline sulfur levels in different FCC operations. Additionally, two different feeds with the same sulfur content can yield different gasoline sulfur levels in the same FCC unit, due to differences in the sulfur selectivities of the feeds. In Grace Davison GSR product applications, FCC feed sulfur levels have varied from 0.15% to 2.40% feed sulfur, while gasoline sulfur reduction levels remain consistent at 20%-35% sulfur reduction. Based on a range of data and experience, Grace Davison has not found a direct correlation between FCC feed sulfur content and gasoline sulfur content or gasoline sulfur reduction levels. Grace Davison GSR catalysts and additives are successfully used in several different FCC unit operations, in conjunction with a variety of FCC catalyst types and FCC feed types, to provide 20%-45% gasoline sulfur reduction.

GSR-5 Reduces Gasoline Sulfur by More Than 40% in India

n two recent applications of Grace Davisons gasoline sulfur reduction additive, GSR-5, in India, gasoline sulfur was reduced by more than 40% without affecting activity and conversion.

GSR-5 additive can be used with any base FCC catalyst. Typically, GSR-5 additive is used in place of 25% of catalyst additions. There have been more than 85 worldwide applications of Grace Davisons gasoline sulfur

reduction catalysts and additives since the technology was first introduced to the market in 1996.

18 www.e-catalysts.com

Please welcome...
Grace Davison Refining Technologies is pleased to welcome Ann Benoit, Matt Chang, and Mike Federspiel to our Technical Sales and Marketing Team. Ann Benoit is Technical Service Representative headquartered out of our Houston office. A B.S.Ch.E. graduate of Tennessee Technological University, Ann joins us from Citgos Lake Charles, LA refinery, where she served as a process engineer, economic analyst, and logistic manager.

Matt Chang, who recently completed the Grace Marketing Leadership Program, is Marketing Manager, Light Olefins. He received his B.S. in Chemical Engineering and a B.A. in Economics from Rutgers University, as well as an MBA in Marketing and Finance from Georgetown University. Previously, Matt held production, quality and R&D engineering positions at JM Manufacturing and PlastPro.

Mike Federspiel, Technical Sales Manager, joins us from Hovensa, where he was Assistant Area Manager, FCC Engineer. Prior to that, he was Chief Technical Advisor, Development Engineer at UOP . Mike holds a B.S.Ch.E. from the University of Wisconsin and is based in the Chicago area.

Olsen to Serve on Q&A Panel

Advanced Refining Technologies (ART) is pleased to announce that Dr. Charles W. Olsen, Worldwide Technical Services Manager, has been selected to 2008 National Petrochemical and Refiners Association Question and Answer panel. Chuck, who has over 15 years of experience in hydroprocessing, has held a variety of technical service, research and technical management positions in Chevron and Grace Davison before joining ART. Olsen holds a B.S.ChE degree from the University of Minnesota, and M.S. and Ph.D. degrees in chemical engineering from the University of Illinois in Champaign-Urbana. The 2008 NPRA Q&A session will be held October 5-8 at the Omni Champions Gate Resort in Orlando, Florida. For more information, go to www.npra.org/meetings.

Grace Davison Refining Technologies Advanced Refining Technologies W.R. Grace & Co.-Conn. 7500 Grace Drive Columbia, MD 21044 410.531.4000 Grace Davison Refining Technologies Advanced Refining Technologies Asia Pacific W.R. Grace (Singapore) Pte. Ltd. #07-02 Wheelock Place Singapore 238880 65.6737.5488 Grace Davison Refining Technologies Advanced Refining Technologies Europe Grace GmbH & Co. K.G. In der Hollerhecke 1 Postfach 1445 D-67545 Worms, Germany 49.6241.40300

Catalagram, Grace, Grace Davison, IMPACT, LIBRA, MIDAS, OlefinsMax, GSR, PINNACLE, SmART Catalyst System are registered trademarks in the United States and/or other countries, of W. R. Grace & Co.-Conn. DXTM and GENESISTM are trademarks of W. R. Grace & Co.-Conn. This trademark list has been compiled using available published information as of the publication date of this brochure and may not accurately reflect current trademark ownership.

catalysts@grace.com

artinfo@grace.com

www.e-catalysts.com