Hook Load
Hook Load
Hook Load
steel wire rope strung to the traveling block Hole depth : 10000 Drill pipe : 5 inch OD 4.276 inch ID 19.5 lb/ft Drill Collar : 8 inch OD 2.825 inch ID 150 lb/ft 500 Mud Weight : 10 ppg Line and shave efficiency coefficient : 0.9615 Calculate : 1) Weight of drill string in air and in mud 2) Hook Load, assuming weight of travelling block and hook to be 3) Dead line and fast line loads, assuming an efficiency facktor of 4) Dynamic crown load 5) Wire line design factor during drilling if breaking strength of is 6) Design factor when running 7 inch casing of
Ft
lb
lb lb/ft
jawab berat drillstring di udara 1) panjang DP 9500.00 ft (10.000-500) Berat DP = Panjang DP x 19,5 lb/ft = 9500 ft x 19,5 lb/ft = 185250,00 lb * berat DP 185250.00 lb Berat DC = Panjang DC x 150 lb/ft = 500 ft x 150 lb/ft = 75000,00 lb * Berat DC 75000.00 lb Berat drillstring di udara = 185250 + 75000 = 260250 lb Berat Drillstring di Udara 260250.00 lb Berat Drill String di udara x Buoyency Factor = 260250 x 0,847 = 220.431,750 lb Berat drillstring di lumpur 220431.750 lb
BF
0.847
2) Hook load berat Drill String di lumpur + berat travelling block & 23.500 lb = 220.431,750 + 23.500 = 243931,75 Hook Load 243931.75 lb
4) Dynamic crown load (DCL) DCL=Dead Line Load (DL) + Fast Line Looads (FL) + Hook loads (HL) DCL = 20336,4994 + 30115,0309 + 243931 DCL 294383.28 lb
Design Factor
7.571 lb
Design Factor
7.57097016