Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
185 views

Design of Horizontal Bracing

Worksheet file for calculation of member capacity/adequacy for horizontal bracing. in put can be had from staad & externally can be designed

Uploaded by

dsananda
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
185 views

Design of Horizontal Bracing

Worksheet file for calculation of member capacity/adequacy for horizontal bracing. in put can be had from staad & externally can be designed

Uploaded by

dsananda
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Design of Horizontal Bracing Connections LOAD COMBINATION: GRADE OF STEEL AS PER IS 2062Fy = MEMBER ID: AXIAL FORCE AS STAAD

=P= MEMBER SIZE = Sectional Area A = Load Data Axial Capacity, T =


DEAD LOAD+WIND LOAD+TEMPERATURE LOAD

250 N/mm2 A101 113.09 kN L90x90x8


2 13.80 cm

155.25 kN > 113.092 KN, OK

( Tc = 0.45 x Fy x A )

Design for 75 % Axial capacity = 116.4375 kN A) Connection Type-1 ( Bolted Conn.) Alternative Grade of Bolts = Dia of Bolts, db = Total Nos of bolts (n)= Tensile Stress, Ft = Shear Stress, Fv = Shear Check V = Max ( P or 75 % T ) / n Shear per bolt, V = Weld length Calculations sw = Weld Thkness, tw = 6.0 mm Length Reqd, lw = P / ( sw x 0.707 x t ) lw Req.= 275 mm Weld Prov. = 2x(90+25+50+50) Weld Prov. = 420 mm Weld Provide is OK A) Profile Welded Connection Weld length Calculations sw = Weld Thkness, tw = 6.0 mm Length Reqd, lw = P / ( sw x 0.707 x t ) lw Req.= 275 mm Lw = 2x(90+74) Weld Prov.Lw = 328 mm Weld Provide is OK 100 N/mm2 100 N/mm2 58.22 kN < Shear Capacity, OK 8.8 24 mm 2 286 N/mm2 191 N/mm2 Root Area of Bolt = Capacity of Bolt Tension, Tc = Shear, Vc =
2 366.58 mm

104.84 kN 70.02 kN

You might also like