GNU Parted User Manual: Andrew Clausen Richard M. Kreuter Leslie Patrick Polzer
GNU Parted User Manual: Andrew Clausen Richard M. Kreuter Leslie Patrick Polzer
GNU Parted User Manual: Andrew Clausen Richard M. Kreuter Leslie Patrick Polzer
Short Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Using Parted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Related information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A Copying This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
B This manual’s history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 1: Introduction 1
1 Introduction
Note that parted will automatically detect libreiserfs at runtime, and enable reiserfs
support. libreiserfs is new, and hasn’t been widely tested yet.
--enable-discover-only
support only reading/probing (reduces size considerably)
--enable-mtrace
enable malloc() debugging
--enable-read-only
disable writing (for debugging)
1.5.1 Introduction
If you want to run GNU Parted on a machine without GNU/Linux in-
stalled, or you want to modify a root or boot partition, use GParted Live:
http://gparted.sourceforge.net/livecd.php.
Chapter 2: Using Parted 4
2 Using Parted
2.4.1 align-check
align-check align-type n [Command]
Determine whether the starting sector of partition n meets the disk’s selected align-
ment criteria. align-type must be ‘minimal’, ‘optimal’ or an abbreviation. When in
script mode, if the partition does not meet the alignment requirement, exit with sta-
tus 1; otherwise (including on older kernels for which alignment data is not available),
continue processing any remaining commands. Without ‘--script’, print either ‘N
aligned’ or ‘N not aligned’.
Example:
(parted) align-check minimal 1
1 aligned
‘pmbr_boot’
(GPT) - this flag enables the boot flag on the GPT’s protective MBR
partition.
The disk’s flags are displayed by the print command on the "Disk Flags:" line. They
are also output as the last field of the disk information in machine mode.
(parted) disk_set pmbr_boot on
Set the PMBR’s boot flag.
2.4.3 help
help [command ] [Command]
Prints general help, or help on command.
Example:
(parted) help mklabel
Print help for the mklabel command.
2.4.4 mklabel
mklabel label-type [Command]
Creates a new disk label, of type label-type. The new disk label will have no parti-
tions. This command (normally) won’t technically destroy your data, but it will make
it basically unusable, and you will need to use the rescue command (see Chapter 3 [Re-
lated information], page 13) to recover any partitions. Parted works on all partition
tables.1
label-type must be one of these supported disk labels:
• bsd
• loop (raw disk access)
• gpt
• mac
• msdos
• pc98
• sun
Example:
(parted) mklabel msdos
Create an MS-DOS disk label. This is still the most common disk label for PCs.
2.4.5 mkpart
mkpart [part-type fs-type name ] start end [Command]
Creates a new partition, without creating a new file system on that partition. This
is useful for creating partitions for file systems (or LVM, etc.) that Parted doesn’t
1
Everyone seems to have a different word for “disk label” — these are all the same thing: partition
table, partition map.
Chapter 2: Using Parted 7
support. You may specify a file system type, to set the appropriate partition code in
the partition table for the new partition. fs-type is required for data partitions (i.e.,
non-extended partitions). start and end are the offset from the beginning of the disk,
that is, the “distance” from the start of the disk.
• ext2
• fat16, fat32
• hfs, hfs+, hfsx
• linux-swap
• NTFS
• reiserfs
• ufs
Example:
Create a logical partition that will contain an ext2 file system. The partition will
start at the beginning of the disk, and end 692.1 megabytes into the disk.
2.4.6 name
Example:
2.4.7 print
Example:
Chapter 2: Using Parted 8
(parted) print
Disk geometry for /dev/hda: 0.000-2445.679 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
1 0.031 945.000 primary fat32 boot, lba
2 945.000 2358.562 primary ext2
3 2358.562 2445.187 primary linux-swap
(parted) print 1
Minor: 1
Flags: boot, lba
File System: fat32
Size: 945.000Mb (0%)
Minimum size: 84.361Mb (0%)
Maximum size: 2445.679Mb (100%)
2.4.8 quit
quit [Command]
Quits Parted.
It is only after Parted exits that the Linux kernel knows about the changes Parted
has made to the disks. However, the changes caused by typing your commands will
probably be made to the disk immediately after typing a command. However, the
operating system’s cache and the disk’s hardware cache may delay this.
2.4.9 rescue
rescue start end [Command]
Rescue a lost partition that used to be located approximately between start and end.
If such a partition is found, Parted will ask you if you want to create a partition for
it. This is useful if you accidently deleted a partition with parted’s rm command, for
example.
Example:
(parted) print
Disk geometry for /dev/hdc: 0.000-8063.507 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
1 0.031 8056.032 primary ext3
(parted) rm
Partition number? 1
(parted) print
Disk geometry for /dev/hdc: 0.000-8063.507 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
OUCH! We deleted our ext3 partition!!! Parted comes to the rescue...
(parted) rescue
Start? 0
End? 8056
Chapter 2: Using Parted 9
2.4.10 rm
rm number [Command]
Removes the partition with number number. If you accidently delete a partition with
this command, use mkpart to recover it. Also, you can use the gpart program (see
Chapter 3 [Related information], page 13) to recover damaged disk labels.
Note for msdos disk labels: if you delete a logical partition, all logical partitions with
a larger partition number will be renumbered. For example, if you delete a logical
partition with a partition number of 6, then logical partitions that were number 7, 8
and 9 would be renumbered to 6, 7 and 8 respectively. This means, for example, that
you have to update ‘/etc/fstab’ on GNU/Linux systems.
Example:
(parted) rm 3
Remove partition 3.
2.4.11 select
select device [Command]
Selects the device, device, for Parted to edit. The device can be a Linux hard disk
device, a partition, a software RAID device or LVM logical volume.
Example:
(parted) select /dev/hdb
Select ‘/dev/hdb’ (the slave device on the first ide controller on Linux) as the device
to edit.
2.4.12 set
set number flag state [Command]
Changes a flag on the partition with number number. A flag can be either “on” or
“off”. Some or all of these flags will be available, depending on what disk label you
are using:
‘bios_grub’
(GPT) - Enable this to record that the selected partition is a GRUB
BIOS partition.
Chapter 2: Using Parted 10
‘legacy_boot’
(GPT) - this flag is used to tell special purpose software that the GPT
partition may be bootable.
‘boot’ (Mac, MS-DOS, PC98) - should be enabled if you want to boot off the
partition. The semantics vary between disk labels. For MS-DOS disk
labels, only one partition can be bootable. If you are installing LILO on
a partition that partition must be bootable. For PC98 disk labels, all
ext2 partitions must be bootable (this is enforced by Parted).
‘lba’ (MS-DOS) - this flag can be enabled to tell MS DOS, MS Windows 9x and
MS Windows ME based operating systems to use Linear (LBA) mode.
‘root’ (Mac) - this flag should be enabled if the partition is the root device to
be used by Linux.
‘swap’ (Mac) - this flag should be enabled if the partition is the swap device to
be used by Linux.
‘hidden’ (MS-DOS, PC98) - this flag can be enabled to hide partitions from Mi-
crosoft operating systems.
‘raid’ (MS-DOS) - this flag can be enabled to tell linux the partition is a software
RAID partition.
‘LVM’ (MS-DOS) - this flag can be enabled to tell linux the partition is a physical
volume.
‘PALO’ (MS-DOS) - this flag can be enabled so that the partition can be used by
the Linux/PA-RISC boot loader, palo.
‘PREP’ (MS-DOS) - this flag can be enabled so that the partition can be used as a
PReP boot partition on PowerPC PReP or IBM RS6K/CHRP hardware.
‘DIAG’ (MS-DOS) - Enable this to indicate that a partition can be used as a
diagnostics / recovery partition.
The print command displays all enabled flags for each partition.
Example:
(parted) set 1 boot on
Set the ‘boot’ flag on partition 1.
2.4.13 unit
unit unit [Command]
Selects the current default unit that Parted will use to display locations and capacities
on the disk and to interpret those given by the user if they are not suffixed by an
unit.
unit may be one of:
‘s’ sector (n bytes depending on the sector size, often 512)
‘B’ byte
Chapter 2: Using Parted 11
‘chs’ cylinders, heads, sectors addressing (related to the BIOS CHS geometry)
‘compact’ This is a special unit that defaults to megabytes for input, and picks a
unit that gives a compact human readable representation for output.
The default unit apply only for the output and when no unit is specified after an
input number. Input numbers can be followed by an unit (without any space or other
character between them), in which case this unit apply instead of the default unit
for this particular number, but CHS and cylinder units are not supported as a suffix.
If no suffix is given, then the default unit is assumed. Parted will compute sensible
ranges for the locations you specify (e.g. a range of +/- 500 MB when you specify the
location in “G”, and a range of +/- 500 KB when you specify the location in “M”)
and will select the nearest location in this range from the one you wrote that satisfies
constraints from both the operation, the filesystem being worked on, the disk label,
other partitions and so on. Use the sector unit “s” to specify exact locations (if they
do not satisfy all constraints, Parted will ask you for the nearest solution). Note that
negative numbers count back from the end of the disk, with “-1s” pointing to the last
sector of the disk.
Note that as of parted-2.4, when you specify start and/or end values using IEC
binary units like “MiB”, “GiB”, “TiB”, etc., parted treats those values as exact, and
equivalent to the same number specified in bytes (i.e., with the “B” suffix), in that
it provides no “helpful” range of sloppiness. Contrast that with a partition start
request of “4GB”, which may actually resolve to some sector up to 500MB before or
after that point. Thus, when creating a partition, you should prefer to specify units
of bytes (“B”), sectors (“s”), or IEC binary units like “MiB”, but not “MB”, “GB”,
etc.
Example:
Chapter 2: Using Parted 12
3 Related information
If you want to find out more information, please see the GNU Parted web site.
These files in the Parted distribution contain further information:
• ABOUT-NLS - information about using Native Language Support, and the Free Transla-
tion Project.
• AUTHORS - who wrote what.
• ChangeLog - record of changes made to Parted.
• COPYING - the GNU General Public License, the terms under which GNU Parted may
be distributed.
• COPYING.DOC - the GNU Free Documentation Licence, the term under which Parted’s
documentation may be distributed.
• INSTALL — how to compile and install Parted, and most other free software
Appendix A: Copying This Manual 14
The “Invariant Sections” are certain Secondary Sections whose titles are designated, as
being those of Invariant Sections, in the notice that says that the Document is released
under this License. If a section does not fit the above definition of Secondary then it is
not allowed to be designated as Invariant. The Document may contain zero Invariant
Sections. If the Document does not identify any Invariant Sections then there are none.
The “Cover Texts” are certain short passages of text that are listed, as Front-Cover
Texts or Back-Cover Texts, in the notice that says that the Document is released under
this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
A “Transparent” copy of the Document means a machine-readable copy, represented
in a format whose specification is available to the general public, that is suitable for
revising the document straightforwardly with generic text editors or (for images com-
posed of pixels) generic paint programs or (for drawings) some widely available drawing
editor, and that is suitable for input to text formatters or for automatic translation to
a variety of formats suitable for input to text formatters. A copy made in an otherwise
Transparent file format whose markup, or absence of markup, has been arranged to
thwart or discourage subsequent modification by readers is not Transparent. An image
format is not Transparent if used for any substantial amount of text. A copy that is
not “Transparent” is called “Opaque”.
Examples of suitable formats for Transparent copies include plain ASCII without
markup, Texinfo input format, LaTEX input format, SGML or XML using a publicly
available DTD, and standard-conforming simple HTML, PostScript or PDF designed
for human modification. Examples of transparent image formats include PNG, XCF
and JPG. Opaque formats include proprietary formats that can be read and edited
only by proprietary word processors, SGML or XML for which the DTD and/or pro-
cessing tools are not generally available, and the machine-generated HTML, PostScript
or PDF produced by some word processors for output purposes only.
The “Title Page” means, for a printed book, the title page itself, plus such following
pages as are needed to hold, legibly, the material this License requires to appear in the
title page. For works in formats which do not have any title page as such, “Title Page”
means the text near the most prominent appearance of the work’s title, preceding the
beginning of the body of the text.
The “publisher” means any person or entity that distributes copies of the Document
to the public.
A section “Entitled XYZ” means a named subunit of the Document whose title either
is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in
another language. (Here XYZ stands for a specific section name mentioned below, such
as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve
the Title” of such a section when you modify the Document means that it remains a
section “Entitled XYZ” according to this definition.
The Document may include Warranty Disclaimers next to the notice which states that
this License applies to the Document. These Warranty Disclaimers are considered to
be included by reference in this License, but only as regards disclaiming warranties:
any other implication that these Warranty Disclaimers may have is void and has no
effect on the meaning of this License.
Appendix A: Copying This Manual 16
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or
noncommercially, provided that this License, the copyright notices, and the license
notice saying this License applies to the Document are reproduced in all copies, and
that you add no other conditions whatsoever to those of this License. You may not use
technical measures to obstruct or control the reading or further copying of the copies
you make or distribute. However, you may accept compensation in exchange for copies.
If you distribute a large enough number of copies you must also follow the conditions
in section 3.
You may also lend copies, under the same conditions stated above, and you may publicly
display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have printed covers) of
the Document, numbering more than 100, and the Document’s license notice requires
Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
the back cover. Both covers must also clearly and legibly identify you as the publisher
of these copies. The front cover must present the full title with all words of the title
equally prominent and visible. You may add other material on the covers in addition.
Copying with changes limited to the covers, as long as they preserve the title of the
Document and satisfy these conditions, can be treated as verbatim copying in other
respects.
If the required texts for either cover are too voluminous to fit legibly, you should put
the first ones listed (as many as fit reasonably) on the actual cover, and continue the
rest onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100,
you must either include a machine-readable Transparent copy along with each Opaque
copy, or state in or with each Opaque copy a computer-network location from which
the general network-using public has access to download using public-standard network
protocols a complete Transparent copy of the Document, free of added material. If
you use the latter option, you must take reasonably prudent steps, when you begin
distribution of Opaque copies in quantity, to ensure that this Transparent copy will
remain thus accessible at the stated location until at least one year after the last time
you distribute an Opaque copy (directly or through your agents or retailers) of that
edition to the public.
It is requested, but not required, that you contact the authors of the Document well
before redistributing any large number of copies, to give them a chance to provide you
with an updated version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document under the conditions
of sections 2 and 3 above, provided that you release the Modified Version under precisely
this License, with the Modified Version filling the role of the Document, thus licensing
distribution and modification of the Modified Version to whoever possesses a copy of
it. In addition, you must do these things in the Modified Version:
Appendix A: Copying This Manual 17
A. Use in the Title Page (and on the covers, if any) a title distinct from that of the
Document, and from those of previous versions (which should, if there were any,
be listed in the History section of the Document). You may use the same title as
a previous version if the original publisher of that version gives permission.
B. List on the Title Page, as authors, one or more persons or entities responsible for
authorship of the modifications in the Modified Version, together with at least five
of the principal authors of the Document (all of its principal authors, if it has fewer
than five), unless they release you from this requirement.
C. State on the Title page the name of the publisher of the Modified Version, as the
publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications adjacent to the other
copyright notices.
F. Include, immediately after the copyright notices, a license notice giving the public
permission to use the Modified Version under the terms of this License, in the form
shown in the Addendum below.
G. Preserve in that license notice the full lists of Invariant Sections and required Cover
Texts given in the Document’s license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled “History”, Preserve its Title, and add to it an item
stating at least the title, year, new authors, and publisher of the Modified Version
as given on the Title Page. If there is no section Entitled “History” in the Docu-
ment, create one stating the title, year, authors, and publisher of the Document
as given on its Title Page, then add an item describing the Modified Version as
stated in the previous sentence.
J. Preserve the network location, if any, given in the Document for public access to
a Transparent copy of the Document, and likewise the network locations given in
the Document for previous versions it was based on. These may be placed in the
“History” section. You may omit a network location for a work that was published
at least four years before the Document itself, or if the original publisher of the
version it refers to gives permission.
K. For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title
of the section, and preserve in the section all the substance and tone of each of the
contributor acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document, unaltered in their text and
in their titles. Section numbers or the equivalent are not considered part of the
section titles.
M. Delete any section Entitled “Endorsements”. Such a section may not be included
in the Modified Version.
N. Do not retitle any existing section to be Entitled “Endorsements” or to conflict in
title with any Invariant Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or appendices that qualify
as Secondary Sections and contain no material copied from the Document, you may at
Appendix A: Copying This Manual 18
your option designate some or all of these sections as invariant. To do this, add their
titles to the list of Invariant Sections in the Modified Version’s license notice. These
titles must be distinct from any other section titles.
You may add a section Entitled “Endorsements”, provided it contains nothing but
endorsements of your Modified Version by various parties—for example, statements of
peer review or that the text has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up
to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified
Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the Document already
includes a cover text for the same cover, previously added by you or by arrangement
made by the same entity you are acting on behalf of, you may not add another; but
you may replace the old one, on explicit permission from the previous publisher that
added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission
to use their names for publicity for or to assert or imply endorsement of any Modified
Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under this License,
under the terms defined in section 4 above for modified versions, provided that you
include in the combination all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your combined work in its license
notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical
Invariant Sections may be replaced with a single copy. If there are multiple Invariant
Sections with the same name but different contents, make the title of each such section
unique by adding at the end of it, in parentheses, the name of the original author or
publisher of that section if known, or else a unique number. Make the same adjustment
to the section titles in the list of Invariant Sections in the license notice of the combined
work.
In the combination, you must combine any sections Entitled “History” in the vari-
ous original documents, forming one section Entitled “History”; likewise combine any
sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You
must delete all sections Entitled “Endorsements.”
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released
under this License, and replace the individual copies of this License in the various
documents with a single copy that is included in the collection, provided that you
follow the rules of this License for verbatim copying of each of the documents in all
other respects.
You may extract a single document from such a collection, and distribute it individu-
ally under this License, provided you insert a copy of this License into the extracted
document, and follow this License in all other respects regarding verbatim copying of
that document.
Appendix A: Copying This Manual 19
Index
A I
align-check, command description . . . . . . . . . . . . . . . 5 invocation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B L
bugs, reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 libuuid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
building parted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 license terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
C M
mklabel, command description . . . . . . . . . . . . . . . . . . 6
command description, align-check . . . . . . . . . . . . . . . 5
mkpart, command description . . . . . . . . . . . . . . . . . . . 6
command description, disk set . . . . . . . . . . . . . . . . . . 5
modes of use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
command description, help . . . . . . . . . . . . . . . . . . . . . . 6
command description, mkindex . . . . . . . . . . . . . . . . . 6
command description, mkpart . . . . . . . . . . . . . . . . . . . 6 N
command description, name. . . . . . . . . . . . . . . . . . . . . 7
name, command description. . . . . . . . . . . . . . . . . . . . . 7
command description, print . . . . . . . . . . . . . . . . . . . . . 7
command description, quit . . . . . . . . . . . . . . . . . . . . . . 8
command description, rescue . . . . . . . . . . . . . . . . . . . . 8 O
command description, rm . . . . . . . . . . . . . . . . . . . . . . . 9
command description, select . . . . . . . . . . . . . . . . . . . . 9 options at invocation . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
command description, set . . . . . . . . . . . . . . . . . . . . . . . 9 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
command description, unit . . . . . . . . . . . . . . . . . . . . . 10
command syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 P
commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
parted description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
commands, detailed listing . . . . . . . . . . . . . . . . . . . . . . 5
partitioning overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
commands, overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
platforms, supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
compiling parted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
print, command description . . . . . . . . . . . . . . . . . . . . . 7
contacting developers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
D Q
quit, command description . . . . . . . . . . . . . . . . . . . . . . 8
description of parted . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
detailed command listing . . . . . . . . . . . . . . . . . . . . . . . 5
disk set, command description . . . . . . . . . . . . . . . . . . 5 R
readline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
E related documentation . . . . . . . . . . . . . . . . . . . . . . . . . 13
reporting bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
e2fsprogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 required software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
rescue, command description . . . . . . . . . . . . . . . . . . . . 8
rm, command description . . . . . . . . . . . . . . . . . . . . . . . 9
F
FDL, GNU Free Documentation License . . . . . . . 14
further reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 S
select, command description . . . . . . . . . . . . . . . . . . . . 9
set, command description . . . . . . . . . . . . . . . . . . . . . . . 9
G software dependencies. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
gettext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 supported platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
gnu gpl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
gpl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
T
terms of distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
H
help, command description . . . . . . . . . . . . . . . . . . . . . . 6
history of this manual . . . . . . . . . . . . . . . . . . . . . . . . . 22
U
unit, command description . . . . . . . . . . . . . . . . . . . . . 10